The retrieval of dissolved organic carbon （DOC） distribution by remote sensing is mainly based on the em- pirical relationship of DOC concentration and colored dissolved organic matter （CDOM） concentration in many...The retrieval of dissolved organic carbon （DOC） distribution by remote sensing is mainly based on the em- pirical relationship of DOC concentration and colored dissolved organic matter （CDOM） concentration in many literatures. To investigate the nature of this relationship, the distributions and mixing behaviors of DOC and CDOM are reviewed in the world＇s major estuaries and bays. It is found that, generally, the C- DOM concentration is well correlated with the salinity in most estuaries, while DOC usually shows a non- conservative behavior which leads to a weak correlation between the DOC concentration and the CDOM concentration. To establish a good satellite reversion of the DOC concentration, the East China Sea（ECS） was taken as an example, and the mixing behavior of DOC and CDOM as well as the influence of biogeo- chemical processes were analyzed except for the physical mixing process with the data from late autumn （November, 2010） and winter （December, 2009） cruises. In the two ECS cruises, the CDOM concentration was found to be tightly correlated with the salinity, influenced little by the photochemical or biological pro- cesses. The data from the winter cruise show that DOC followed a conservative mixing along the salinity gradient, while in the late autumn cruise it was significantly affected by the biological activities, resulting in a poor correlation between the DOC and the CDOM. Accordingly, an improved DOC algorithm （CSDM） was proposed： when the biological influence was significant （Chl a greater than 0.8 μg/dm3）, DOC was retrieved by the conservative and biological model, and if the conservative mixing was dominant （Chl a less than 0.8 μg/dm3）, the direct DOC concentration and CDOM concentration relationship was used. Based on the pro- posed algorithm, a reasonable DOC distribution for the ECS from satellite was obtained in this study, and the proposed method can be applied to the other large river-dominant marginal sea.展开更多
This study carried out on the soybean oil samples taken from the processing lines during refining process (degumming, neutralization, bleaching and deodorization process) for crude soybean oil as well as on color reve...This study carried out on the soybean oil samples taken from the processing lines during refining process (degumming, neutralization, bleaching and deodorization process) for crude soybean oil as well as on color reversed oil after deodorization step during storage for several hours to study the physical and chemical properties (color, refractive index (RI), free fatty acid (FFA), peroxide value (PV), p-Anisidine value (p-AV), total oxidative (TOTOX) value, oxidative stability (OS), saponification value (SV), iodine value (IV), unsaponifiable matter (unsap. %), soap content, minerals, waxes, total phenols content, K<sub>232</sub> and k<sub>270</sub> nm), the fatty acids composition, sterol compound, total tocopherols and their components (α, β, γ and δ tocopherol) and tocored compound for these oils and to find out the reason for the color reversion after a short period from storage for the deodorized soybean oil. Citric acid has been added (0.2%) to each color reversed and neutralized soybean oils, then procedure of bleaching and deodorization process on them, and studied its effect on the physical and chemical properties for them specially the color units (red and yellow), tocopherols contents and tocored compound. The results showed that refining process for soybean oil caused to a gradual decrease in values of AV, oxidative stability, IV, wax, % Unsapo., K<sub>232</sub> and K<sub>270</sub> nm, total polyphenols, minerals (P, Ca and Mg), total tocopherols and their compounds (α, β, γ and δ tocopherol) and also caused decrease in all sterol components, but they showed a few differences in percentages of fatty acids as result refining process. Color values (red and yellow unites) recorded gradually decreased during refining process, but these values were increased in deodorized soybean oil after storage (color reversed soybean oil). Reduction of α, β, γ and δ tocopherol contents was found to be linearly with the increase of red and yellow color units (color darking). The tocored is responsible for the color reversion phenomenon, where as maximum amount of tocored was in crude soybean oil 169.2 ppm, which gradually decreased during refining process 120.35, 99.82, 20.25, and 8.46 ppm, respectively, but it was found to be 46.5 ppm in color reversed soybean oil. Addition of citric acid (0.2%) related to the removal of tocored from soybean oil during the bleaching and deodorization process of soybean oil before and after color reversion in parallel with the significant decrease in the color values.展开更多
This paper presents a principle and a method of col or 3D laser scanning measurement. Based on the fundamental monochrome 3D measureme nt study, color information capture, color texture mapping, coordinate computati o...This paper presents a principle and a method of col or 3D laser scanning measurement. Based on the fundamental monochrome 3D measureme nt study, color information capture, color texture mapping, coordinate computati on and other techniques are performed to achieve color 3D measurement. The syste m is designed and composed of a line laser light emitter, one color CCD camera, a motor-driven rotary filter, a circuit card and a computer. Two steps in captu ring object’s images in the measurement process: First, the color CCD camera ta kes the color picture of the object to be used for texture mapping in post proce ssing. Secondly, the monochrome data of the object is taken. The laser light emi tter is started; the light plane and the surface of the object intersect to form an undulate line, which forms an image on the CCD sensor. After the optic- electronics transformation, the electronic signals are captured and send to the computer. A new color 3D measurement model was derived, and a rapid calibra ting method to measure the system parameters was proposed--optical plane equat ion calibrating method. A calibrating drone was designed and built. 3D color sca nning system not only provides an object’s individual point information in the 3D coordinate, in the mean time, it provides the color information of each indiv idual point. This paper also advances a multi-frame auto-merging method, i.e. several frames of color 3D digital images measured are merged quickly according to their curvature characteristics and RGB information. Initial matching and fin e tune of the registration are completely performed by the computer; initial mat ching is via user interface in helping computer to find the transformation matri x. The transformation matrix is found according to the geometric characteristics chosen by hand. After the initial transformation matrix is found, fine tune of the registration is preformed to do the optimum adjustment to achieve a complete color textured 3D model. The system can be broadly used in the fields of produc t design, mold manufacture, multimedia, game development, animation, medical eng ineering, antique digitization, etc.展开更多
Purpose: To objectively evaluate the clinical application of color pattern reversal visual e-voked potential (CPR-VEP) on primary open angle glaucoma (POAG). Methods: CPR-VEP and FM 100-hue test were performed in 31 e...Purpose: To objectively evaluate the clinical application of color pattern reversal visual e-voked potential (CPR-VEP) on primary open angle glaucoma (POAG). Methods: CPR-VEP and FM 100-hue test were performed in 31 eyes with POAG and 33 normal eyes. Color pattern stimulation was presented by color monitor controlled by computer program. The reversal rate of the stimulating pattern was 2 Hz and the spatial frequency of the stimulating was 0.53 cycle/degree. The color stimulating pattern include White /Black , Red/Black , Green/Black , Blue/Black , Yellow /Black , Red/Green and Blue /Yellow . Results : CPR-VEP P1 latencies were obviously prolonged in POAG group in comparison with normal control group in equiluminance. All CPR-VEP P1 amplitudes, except Blue/Black P1 amplitude, show no differences between POAG group and normal control group . Conclusion: P1 latencies of all CPR-VEP and P1 amplitude of Blue/Black CPR-VEP were parameters for identifing acquired dyschromatopsia caused by POAG. The results展开更多
基金The National Basic Research Program of China (973 Program) under contract No.2009CB421202the Public Science and Technology Research Funds Projects of Ocean of China under contract No. 200905012the National Natural Science Foundation of China under contract Nos 40976110 and 40706061
文摘The retrieval of dissolved organic carbon （DOC） distribution by remote sensing is mainly based on the em- pirical relationship of DOC concentration and colored dissolved organic matter （CDOM） concentration in many literatures. To investigate the nature of this relationship, the distributions and mixing behaviors of DOC and CDOM are reviewed in the world＇s major estuaries and bays. It is found that, generally, the C- DOM concentration is well correlated with the salinity in most estuaries, while DOC usually shows a non- conservative behavior which leads to a weak correlation between the DOC concentration and the CDOM concentration. To establish a good satellite reversion of the DOC concentration, the East China Sea（ECS） was taken as an example, and the mixing behavior of DOC and CDOM as well as the influence of biogeo- chemical processes were analyzed except for the physical mixing process with the data from late autumn （November, 2010） and winter （December, 2009） cruises. In the two ECS cruises, the CDOM concentration was found to be tightly correlated with the salinity, influenced little by the photochemical or biological pro- cesses. The data from the winter cruise show that DOC followed a conservative mixing along the salinity gradient, while in the late autumn cruise it was significantly affected by the biological activities, resulting in a poor correlation between the DOC and the CDOM. Accordingly, an improved DOC algorithm （CSDM） was proposed： when the biological influence was significant （Chl a greater than 0.8 μg/dm3）, DOC was retrieved by the conservative and biological model, and if the conservative mixing was dominant （Chl a less than 0.8 μg/dm3）, the direct DOC concentration and CDOM concentration relationship was used. Based on the pro- posed algorithm, a reasonable DOC distribution for the ECS from satellite was obtained in this study, and the proposed method can be applied to the other large river-dominant marginal sea.
文摘This study carried out on the soybean oil samples taken from the processing lines during refining process (degumming, neutralization, bleaching and deodorization process) for crude soybean oil as well as on color reversed oil after deodorization step during storage for several hours to study the physical and chemical properties (color, refractive index (RI), free fatty acid (FFA), peroxide value (PV), p-Anisidine value (p-AV), total oxidative (TOTOX) value, oxidative stability (OS), saponification value (SV), iodine value (IV), unsaponifiable matter (unsap. %), soap content, minerals, waxes, total phenols content, K<sub>232</sub> and k<sub>270</sub> nm), the fatty acids composition, sterol compound, total tocopherols and their components (α, β, γ and δ tocopherol) and tocored compound for these oils and to find out the reason for the color reversion after a short period from storage for the deodorized soybean oil. Citric acid has been added (0.2%) to each color reversed and neutralized soybean oils, then procedure of bleaching and deodorization process on them, and studied its effect on the physical and chemical properties for them specially the color units (red and yellow), tocopherols contents and tocored compound. The results showed that refining process for soybean oil caused to a gradual decrease in values of AV, oxidative stability, IV, wax, % Unsapo., K<sub>232</sub> and K<sub>270</sub> nm, total polyphenols, minerals (P, Ca and Mg), total tocopherols and their compounds (α, β, γ and δ tocopherol) and also caused decrease in all sterol components, but they showed a few differences in percentages of fatty acids as result refining process. Color values (red and yellow unites) recorded gradually decreased during refining process, but these values were increased in deodorized soybean oil after storage (color reversed soybean oil). Reduction of α, β, γ and δ tocopherol contents was found to be linearly with the increase of red and yellow color units (color darking). The tocored is responsible for the color reversion phenomenon, where as maximum amount of tocored was in crude soybean oil 169.2 ppm, which gradually decreased during refining process 120.35, 99.82, 20.25, and 8.46 ppm, respectively, but it was found to be 46.5 ppm in color reversed soybean oil. Addition of citric acid (0.2%) related to the removal of tocored from soybean oil during the bleaching and deodorization process of soybean oil before and after color reversion in parallel with the significant decrease in the color values.
文摘This paper presents a principle and a method of col or 3D laser scanning measurement. Based on the fundamental monochrome 3D measureme nt study, color information capture, color texture mapping, coordinate computati on and other techniques are performed to achieve color 3D measurement. The syste m is designed and composed of a line laser light emitter, one color CCD camera, a motor-driven rotary filter, a circuit card and a computer. Two steps in captu ring object’s images in the measurement process: First, the color CCD camera ta kes the color picture of the object to be used for texture mapping in post proce ssing. Secondly, the monochrome data of the object is taken. The laser light emi tter is started; the light plane and the surface of the object intersect to form an undulate line, which forms an image on the CCD sensor. After the optic- electronics transformation, the electronic signals are captured and send to the computer. A new color 3D measurement model was derived, and a rapid calibra ting method to measure the system parameters was proposed--optical plane equat ion calibrating method. A calibrating drone was designed and built. 3D color sca nning system not only provides an object’s individual point information in the 3D coordinate, in the mean time, it provides the color information of each indiv idual point. This paper also advances a multi-frame auto-merging method, i.e. several frames of color 3D digital images measured are merged quickly according to their curvature characteristics and RGB information. Initial matching and fin e tune of the registration are completely performed by the computer; initial mat ching is via user interface in helping computer to find the transformation matri x. The transformation matrix is found according to the geometric characteristics chosen by hand. After the initial transformation matrix is found, fine tune of the registration is preformed to do the optimum adjustment to achieve a complete color textured 3D model. The system can be broadly used in the fields of produc t design, mold manufacture, multimedia, game development, animation, medical eng ineering, antique digitization, etc.
文摘Purpose: To objectively evaluate the clinical application of color pattern reversal visual e-voked potential (CPR-VEP) on primary open angle glaucoma (POAG). Methods: CPR-VEP and FM 100-hue test were performed in 31 eyes with POAG and 33 normal eyes. Color pattern stimulation was presented by color monitor controlled by computer program. The reversal rate of the stimulating pattern was 2 Hz and the spatial frequency of the stimulating was 0.53 cycle/degree. The color stimulating pattern include White /Black , Red/Black , Green/Black , Blue/Black , Yellow /Black , Red/Green and Blue /Yellow . Results : CPR-VEP P1 latencies were obviously prolonged in POAG group in comparison with normal control group in equiluminance. All CPR-VEP P1 amplitudes, except Blue/Black P1 amplitude, show no differences between POAG group and normal control group . Conclusion: P1 latencies of all CPR-VEP and P1 amplitude of Blue/Black CPR-VEP were parameters for identifing acquired dyschromatopsia caused by POAG. The results
