Biodiversity experiments have shown that soil organic carbon(SOC)is not only a function of plant diversity,but is also closely related to the nitrogen(N)-fixing plants.However,the effect of N-fixing trees on SOC chemi...Biodiversity experiments have shown that soil organic carbon(SOC)is not only a function of plant diversity,but is also closely related to the nitrogen(N)-fixing plants.However,the effect of N-fixing trees on SOC chemical stability is still little known,especially with the compounding effects of tree species diversity.An experimental field manipulation was established in subtropical plantations of southern China to explore the impacts of tree species richness(i.e.,one,two,four and six tree species)and with/without N-fixing trees on SOC chemical stability,as indicated by the ratio of easily oxidized organic carbon to SOC(EOC/SOC).Plant-derived C components in terms of hydrolysable plant lipids and lignin phenols were isolated from soils for evaluating their relative contributions to SOC chemical stability.The results showed that N-fixing tree species rather than tree species richness had a significant effect on EOC/SOC.Hydrolysable plant lipids and lignin phenols were negatively correlated with EOC/SOC,while hydrolysable plant lipids contributed more to EOC/SOC than lignin phenols,especially in the occurrence of N-fixing trees.The presence of N-fixing tree species led to an increase in soil N availability and a decrease in fungal abundance,promoting the selective retention of certain key components of hydrolysable plant lipids,thus enhancing SOC chemical stability.These findings underpin the crucial role of N-fixing trees in shaping SOC chemical stability,and therefore,preferential selection of N-fixing tree species in mixed plantations is an appropriate silvicultural strategy to improve SOC chemical stability in subtropical plantations.展开更多
Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High...Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.展开更多
A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the ex...A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the extracts of black-liquor issued by straw pulp paper mills. Unlike the polyvinyl acetate or foamed asphalt commonly used for dune stabilization, the new material is plant-friendly and can be used with virescence actions simultaneously. The field experimental study was conducted since 2001 in China's Northwest Ningxia Hui Autonomous Region and has been proved that LSSM is effective in stabilizing the fugitive dunes, making the arenaceous plants survive and the bare dune vegetative. The advisable solution concentration is 2% and the optimal field spraying quantity is 2 5 L/m^2 The soil nutrients of the stabilized and greened dune, such as organic matter, available phosphorous and total nitrogen are all increased compared with the control treatment, which is certainly helpful to the growth of arenaceous plants. The technique is worthwhile to be popularized because it is provided not only a new method for desertification control but also an outlet for cleaning contaminants issued from the straw paper mills.展开更多
Three kinds of craft waste liquids, which are by-products in the pulp industry and contain much lignin, were used as dispersing additives for preparing Horonai coal CWM(coal water mixture). The experiments showed t...Three kinds of craft waste liquids, which are by-products in the pulp industry and contain much lignin, were used as dispersing additives for preparing Horonai coal CWM(coal water mixture). The experiments showed that the CWM exhibited the lowest viscosity when it was diluted with an appropriate amount of water with the waste eiquids added. The experiments also indicated that the maximum coal concentration in the practically applicable CWMs whose apparent viscosity has to be below 1000 mPa·s increased from 56.5% to 62.5%(mass fraction), and 56.5% is the maximum coal mass fraction of the CWM prepared without additives. These data show the effectiveness of the waste liquids as the additives for preparing CWMs. The zeta potential of coal particles in the CWMs changed with the addition of lignin. From the change, the steric repulsion effect of the lignin adsorbed on the coal particles is concluded to be mainly responsible for the CWM dispersion. The waste liquids contain less sulfur than PSSNa(polystyrene sulfonate sodium salt), a typical dispersant which is currently used for preparing the commercial CWM, when the sulfur content in the unit mass of the solid matters within the waste liquids is compared with that in unit mass of PSSNa. This fact suggests that the waste liquids are more advantageous than PSSNa as far as air pollutants are concerned.展开更多
In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing...In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing time , and so on . The best conditions in this research are : the concentration of Na2SiO3 and organic matters are 4. 50% and 26.4% respectively, pH = 3.3 , T = 65℃ , ageing time is 30min , dried at 150 ℃ , the size of SiC precursors is about 2.0μm .展开更多
This paper summarizes the possible application of lignin extraction from black liquor and the development of lignin extraction technology.Lignin extraction from black liquor is an important,economical method to resolv...This paper summarizes the possible application of lignin extraction from black liquor and the development of lignin extraction technology.Lignin extraction from black liquor is an important,economical method to resolve the bottleneck associated with the recovery boiler and achieve the targeted capacity expansion in pulp mills.A few of key issues must be taken into cosideration when lignin extraction technology is adopted on the industrial scale.展开更多
The measurement of lignin content in black liquid of straw AS-AQ by ultraviolet spectrophotometer(UV) is discussed in this paper. Different dilution multiple and contrast solutions have an effect on the measured resul...The measurement of lignin content in black liquid of straw AS-AQ by ultraviolet spectrophotometer(UV) is discussed in this paper. Different dilution multiple and contrast solutions have an effect on the measured results of the lignin content by UV. The calculation method for the absorption coefficient and the scanning spectrum property of liquor acidified by SO2 are introduced in this paper.展开更多
Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated l...Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated liquor and pulp of every cycles are analyzed respectively. Result shows that the content of lignin and organism in recycle black liquor and separated liquor increases faster in the first three cycles and then continues to increase slowly till four or five times, after that it trends to a stable state. The main organism separated from waste liquor of AS-AQ treated by sulfur dioxide is alkali-lignin, above 50% of total lignin in black liquor. The yield of pulp made from recycle cooking is steady, the hardness of pulp has a great improvement with recycle cooking. The brightness of pulp reduces correspondingly before bleaching, and after bleaching the brightness of pulp is relatively high and steady at the same sodium hypo chlorite dosage.展开更多
基金supported by the National Natural Science Foundation of China(31930078,32301559)the Ministry of Science and Technology of China(2021YFD2200405,2021YFD2200402)+1 种基金Fundamental Research Funds of CAF(CAFYBB2021ZW001)the program for scientific research start-up funds of Guangdong Ocean University。
文摘Biodiversity experiments have shown that soil organic carbon(SOC)is not only a function of plant diversity,but is also closely related to the nitrogen(N)-fixing plants.However,the effect of N-fixing trees on SOC chemical stability is still little known,especially with the compounding effects of tree species diversity.An experimental field manipulation was established in subtropical plantations of southern China to explore the impacts of tree species richness(i.e.,one,two,four and six tree species)and with/without N-fixing trees on SOC chemical stability,as indicated by the ratio of easily oxidized organic carbon to SOC(EOC/SOC).Plant-derived C components in terms of hydrolysable plant lipids and lignin phenols were isolated from soils for evaluating their relative contributions to SOC chemical stability.The results showed that N-fixing tree species rather than tree species richness had a significant effect on EOC/SOC.Hydrolysable plant lipids and lignin phenols were negatively correlated with EOC/SOC,while hydrolysable plant lipids contributed more to EOC/SOC than lignin phenols,especially in the occurrence of N-fixing trees.The presence of N-fixing tree species led to an increase in soil N availability and a decrease in fungal abundance,promoting the selective retention of certain key components of hydrolysable plant lipids,thus enhancing SOC chemical stability.These findings underpin the crucial role of N-fixing trees in shaping SOC chemical stability,and therefore,preferential selection of N-fixing tree species in mixed plantations is an appropriate silvicultural strategy to improve SOC chemical stability in subtropical plantations.
基金This research was funded by the National Natural Science Foundation of China(No.21978104)the Program for the National Key Research and Development Program of China(No.2021YFC2101601).
文摘Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.
文摘A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the extracts of black-liquor issued by straw pulp paper mills. Unlike the polyvinyl acetate or foamed asphalt commonly used for dune stabilization, the new material is plant-friendly and can be used with virescence actions simultaneously. The field experimental study was conducted since 2001 in China's Northwest Ningxia Hui Autonomous Region and has been proved that LSSM is effective in stabilizing the fugitive dunes, making the arenaceous plants survive and the bare dune vegetative. The advisable solution concentration is 2% and the optimal field spraying quantity is 2 5 L/m^2 The soil nutrients of the stabilized and greened dune, such as organic matter, available phosphorous and total nitrogen are all increased compared with the control treatment, which is certainly helpful to the growth of arenaceous plants. The technique is worthwhile to be popularized because it is provided not only a new method for desertification control but also an outlet for cleaning contaminants issued from the straw paper mills.
基金Supported by the Core Research for Evolutional Science and Technology(CREST) ,Japan Science and TechnologyCorporation(JST)
文摘Three kinds of craft waste liquids, which are by-products in the pulp industry and contain much lignin, were used as dispersing additives for preparing Horonai coal CWM(coal water mixture). The experiments showed that the CWM exhibited the lowest viscosity when it was diluted with an appropriate amount of water with the waste eiquids added. The experiments also indicated that the maximum coal concentration in the practically applicable CWMs whose apparent viscosity has to be below 1000 mPa·s increased from 56.5% to 62.5%(mass fraction), and 56.5% is the maximum coal mass fraction of the CWM prepared without additives. These data show the effectiveness of the waste liquids as the additives for preparing CWMs. The zeta potential of coal particles in the CWMs changed with the addition of lignin. From the change, the steric repulsion effect of the lignin adsorbed on the coal particles is concluded to be mainly responsible for the CWM dispersion. The waste liquids contain less sulfur than PSSNa(polystyrene sulfonate sodium salt), a typical dispersant which is currently used for preparing the commercial CWM, when the sulfur content in the unit mass of the solid matters within the waste liquids is compared with that in unit mass of PSSNa. This fact suggests that the waste liquids are more advantageous than PSSNa as far as air pollutants are concerned.
文摘In the process of synthesis of nanometer SiC precursors with sol-gel of SiO2 and lignin , the products of all sizes required can be controlled by the concentration of reac-t ants , pH, temperature, reaction and ageing time , and so on . The best conditions in this research are : the concentration of Na2SiO3 and organic matters are 4. 50% and 26.4% respectively, pH = 3.3 , T = 65℃ , ageing time is 30min , dried at 150 ℃ , the size of SiC precursors is about 2.0μm .
基金supported by the State Natural Sciences Foundation(No.31270635 and No.31670582)the National Major Fundamental Research Program of China(973 Programs,No.2013CB228101)
文摘This paper summarizes the possible application of lignin extraction from black liquor and the development of lignin extraction technology.Lignin extraction from black liquor is an important,economical method to resolve the bottleneck associated with the recovery boiler and achieve the targeted capacity expansion in pulp mills.A few of key issues must be taken into cosideration when lignin extraction technology is adopted on the industrial scale.
文摘The measurement of lignin content in black liquid of straw AS-AQ by ultraviolet spectrophotometer(UV) is discussed in this paper. Different dilution multiple and contrast solutions have an effect on the measured results of the lignin content by UV. The calculation method for the absorption coefficient and the scanning spectrum property of liquor acidified by SO2 are introduced in this paper.
文摘Thick black liquor, thin black liquor and solid state sodium hydroxide are added to the liquor treated by sulfur dioxide, then the blended liquor is used to recycle cooking of straw pulp. The black liquor, separated liquor and pulp of every cycles are analyzed respectively. Result shows that the content of lignin and organism in recycle black liquor and separated liquor increases faster in the first three cycles and then continues to increase slowly till four or five times, after that it trends to a stable state. The main organism separated from waste liquor of AS-AQ treated by sulfur dioxide is alkali-lignin, above 50% of total lignin in black liquor. The yield of pulp made from recycle cooking is steady, the hardness of pulp has a great improvement with recycle cooking. The brightness of pulp reduces correspondingly before bleaching, and after bleaching the brightness of pulp is relatively high and steady at the same sodium hypo chlorite dosage.
