Methodology Validation of Microbial Limit Test of Bupi Qiangli Ointment

[Objective] This study was conducted to establish a microbial limit test method for Bupi Qiangli Ointment. [Method] The conventional method and medium dilution method were used for bacterial, mold and yeast counting in sample recovery test. [Result] The medium dilution method （1：10 test solution, 0.5 ml/plate） could effectively eliminate the inhibition effect of the Bupi Qiangli Ointment, and the recovery of Staphylococcus aureus was greater than 70% in the 3 batches of samples; and the conventional method exhibited the recoveries of E. coil, Bacillus subtilis, Candida albicans and Aspergillus greater than 70% in the 3 batches of samples. [Conclusion] Due to Bupi Qiangli Ointment has strongly antibacterial effect on Staphylococcus au- reus, the medium dilution method was used for bacterial counting, and the conventional method was used for mold and yeast counting; and the conventional method was used for controlled bacterium examination of E. coll.

Establishment of Microbial Limit Test Methods for Two Hospital Preparations

[Objectives] This study was conducted to establish microbial limit test methods for traditional Chinese medicine preparations Yunpi Granules and Bupi Qiangli Paste. [Methods] According to General Rules of Part IV of Chinese Pharmacopoeia, applicability tests were conducted on microbial limit test methods for the above two traditional Chinese medicine preparations by the plate method. [Results] The established methods showed recovery values in the range of 0.5-2.0 for both experimental strains, and the control bacteria could be detected in the experimental group, but not in the negative control group. [Conclusions] The microbial limit test methods were reliable for the two traditional Chinese medicine preparations and could be used for quality control.

Applicability of Microbial Limit Test Method for Qingyan Zhisou Powder

[Objectives]This study was conducted to establish a microbial limit test method for Qingyan Zhisou Powder.[Methods]Applicability tests were carried out according to Microbial Limit Tests of Non-sterile Products,General Rules 1105-1107 of Part IV of Chinese Pharmacopoeia,2020.[Results]Qingyan Zhisou Powder had a strong bacteriostatic effect on Pseudomonas aeruginosa.After increasing the dilution ratio(1:40),the bacteriostatic effect was obviously eliminated.When the total number of aerobic microbes was determined by the test liquid dilution method(1:40),the recovery values were in the range of 50%-200%;and when using the test liquid(1:10)to determine the total number of mold and yeasts,the recovery ranged from 50%to 200%.Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria were detected by both the routine method and dilution method in experimental groups.[Conclusions]The microbial limit test of Qingyan Zhisou Powder adopted the test liquid dilution method,and the routine method could be used for the test of Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria.The applicability test of the method is feasible,with scientific and accurate results,and the method can effectively control the quality of the preparation and is recommended for popularization.

Validation of Microbial Limit Test Methods of Tongmai Tangyanming Capsule

[ Objectives] This study was conducted to establish a method for microbial limit test of Tongmai Tangyanming Capsule. [ Methods] According to the Chinese Pharmacopoei 2015 edition of the four general rules, the microbiological limits of non-sterile products were verified. [ Results] Tongmai Tangyanming Capsule has a strong inhibitory effect on Bacillus subtilis and Candida albicans. The antimicrobial activity was significantly eliminated after increasing the diluent （ 1 ： 20） ; and the recoveries were in the range of 0.5 -2 when the total quantities of aerobic microbes were determined by dilution method （1：20）. When the total quantities of mould and yeast were determined by dilution method （1：20）, the recoveries were from 0.5 to 2, and Escherichia coli, cholate-tolerant Gram-negative bacteria and Salmonella can be detected by the test solution dilution method. [ Condusions] With the plate method, the total quantities of aerobic bacteria and the quantities of mould and yeast were examined by increasing diluent, and conventional method was used for examination of control bacteria including E. coli, cholatetolerant Gram-negative bacteria and Salmonella. This method has been proved effective for microbial limit test of Tongmai Tangyanming Capsule, and can effectively control the quality of the preparation. The method is accurate and reliable.

Validation of Microbial Limit Test Methods of Compound Gangbangui Capsule

[Objectives] This study was conducted to establish a method for microbial limit test of Compound Gangbangui Capsule. [Methods] According to the Chinese Pharmacopoei 2015 edition of the four general rules,the microbiological limits of non-sterile products were verified. [Results]Compound Gangbangui Capsule has a strong inhibitory effect on S. aureus,and the antimicrobial activity was significantly eliminated after increasing the diluent（ 1∶ 20）; and the recoveries were in the range of 0. 5-2. 0 when the total quantities of aerobic microbes were determined by dilution method（ 1∶ 20）. When the total quantities of mould and yeast were determined by conventional method（ 1∶ 20）,the recoveries were from 0. 5 to 2. 0,and Escherichia coli can be detected in experimental groups by the test solution dilution method. [Conclusions]With the plate method,the total quantities of aerobic bacteria and the quantities of mould and yeast were examined by increasing diluent and conventional method,respectively,and control bacteria,E. coli was examined by conventional method. This method has been proved effective for microbial limit test of Compound Gangbangui Capsule,and can effectively control the quality of the preparation. The method is accurate and reliable.

Prediction of plane-strain specimen geometry to efficiently obtain a forming limit diagram by Marciniak test

Plane-strain forming limit strain （also known as FLD0） is an important data point on a forming limit diagram （FLD）. The effects of friction coefficients and material parameters on the specimen width associated with the FLDo （W FLD0） in Marciniak test were studied by finite element simulation. WFLD0 was expressed as a function of the Lankford coefficients, n-value, k-value and sheet thickness and validated with various sheet materials. The determination of W FLD0 is of significance not only to reduce iterative attempts to accurately obtain FLDo, but also to obtain a full valid FLD with the least number of test specimens, which largely increases the efficiency and reduces cost to experimentally measure valid FLDs.