Higher-Order Line Element Analysis of Potential Field with Slender Heterogeneities

Potential field due to line sources residing on slender heterogeneities is involved in various areas,such as heat conduction,potential flow,and electrostatics.Often dipolar line sources are either prescribed or induced due to close interaction with other objects.Its calculation requires a higher-order scheme to take into account the dipolar effect as well as net source effect.In the present work,we apply such a higher-order line element method to analyze the potential field with cylindrical slender heterogeneities.In a benchmark example of two parallel rods,we compare the line element solution with the boundary element solution to show the accuracy as a function in terms of rods distance.Furthermore,we use more complicated examples to demonstrate the capability of the line element technique.

STUDY ON THREE-DIMENSIONAL FINITE BODIES CONTAINING CRACKS USING THE FINITE ELEMENT METHOD OF LINES

The three-dimensional finite element method of lines is presented, and the basic processing description of 3D FEMOL in cracking questions is given in detail. Applications to 3D bodies with cracks indicate that good accuracy can be obtained with relatively coarse girds. In particular, application to the tension specimen shows very good agreement with the evaluation of stress intensity factors, which is better than the results of other methods. This implies a considerable potential for using this method in the 3D analysis of finite geometry solids and suggests a possible extension of this technique to nonlinear material behavior.

Cracking analysis of fracture mechanics by the finite element method of lines(FEMOL)

The Finite Element Method of Lines （FEMOL） is a semi-analytic approach and takes a position between FEM and analytic methods. First, FEMOL in Fracture Mechanics is presented in detail. Then, the method is applied to a set of examples such as edge-crack plate, the central-crack plate, the plate with cracks emanating from a hole under tensile or under combination loads of tensile and bending. Their dimensionless stress distribution, the stress intensify factor （SIF） and crack opening displacement （COD） are obtained, and comparison with known solutions by other methods are reported. It is found that a good accuracy is achieved by FEMOL. The method is successfully modified to remarkably increase the accuracy and reduce convergence difficulties. So it is a very useful and new tool in studying fracture mechanics problems.

Line-element based nonlinear adaptive piecewise compensating correction for LVDT sensors

In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for piecewise compensating correction was proposed. According to the mechanical structure of LVDT, the output equation was calculated, and then the theoretic nonlinear source of output was analyzed. By the proposed line-element adaptive segmentation method, the nonlinear output of LVDT was divided into linear and nonlinear regions with a given threshold. Then the com- pensating correction function was designed for nonlinear parts employing polynomial regression tech- nique. The simulation of LVDT validates the feasibility of proposed scheme, and the results of cali- bration and testing experiments fully prove that the proposed method has higher accuracy than the state-of-art correction algorithms.

Long interspersed elements in three species of Gracilaria (Gracilariaceae, Rhodophyta)

In order to find out whether long interspersed elements （LINEs） existed in macro-algae gehomes or not, we tested the LINE homologues in representative families （species）： Gracilaria （G. eucheumoides Harv., G. tenuistipitata Chang et Xia, and G. textorii （Sur） De-Toni）, Laminaria （L. longissima Miyabe and L. japonica Aresch.）, and Ulva （U. lactuca L. and U. pertusa Kjellm.） during 2004 to 2005. Polymerase Chain Reaction （PCR） was carried out with degenerate oligonucleotide primers designed from LINEs of rice homologues and Cin4 of maize. Cloning and nucleotide sequencing of the PCR products revealed that 4 clones that derived from 3 species of Gracilaria have LINE homologues. The nucleotide sequences of the 4 LINE homologues diverged greatly, but the amino acid sequences deduced from them were relatively conserved. The endonuclease regions of the LINE homologues greatly diverged from that of other plants, but they had closer phylogenetic relationship to Zepp elements in Chlorella sp., which indicated that sequence divergence by vertical transmission has been a major influence on the evolution of algal LINEs.

COMPUTATION OF STRESS INTENSITY FACTORS BY THE SUB-REGION MIXED FINITE ELEMENT METHOD OF LINES

Based on the sub-region generalized variationM principle, a sub-region mixed version of the newly-developed semi-analytical ＇finite element method of lines＇ （FEMOL） is proposed in this paper for accurate and efficient computation of stress intensity factors （SIFs） of two-dimensional notches/cracks. The circular regions surrounding notch/crack tips are taken as the complementary energy region in which a number of leading terms of singular solutions for stresses are used, with the sought SIFs being among the unknown coefficients. The rest of the arbitrary domain is taken as the potential energy region in which FEMOL is applied to obtain approximate displacements. A mixed system of ordinary differential equations （ODEs） and algebraic equations is derived via the sub-region generalized variational principle. A singularity removal technique that eliminates the stress parameters from the mixed equation system eventually yields a standard FEMOL ODE system, the solution of which is no longer singular and is simply and efficiently obtained using a standard general-purpose ODE solver. A number of numerical examples, including bi-material notches/cracks in anti-plane and plane elasticity, are given to show the generally excellent performance of the proposed method.

Einstein’s Non-Euclidean Line Element Theory and Quantum Mechanics Interpretation

In “The third speech on the wave mechanics” (1926), E. Schodinger pointed that the Hamilton-Maupertuis principle as a classical starting point of wave mechanics in the definition of generalized coordinate space line element, introduced the generalized non-Euclidean geometry, and finally obtained the wave equation including Laplace operator in the generalized non Euclidean geometry line element. At the 1927 meeting of the Prussian Academy of Sciences in Berlin, Albert Einstein read a paper entitled “Does Schodinger’s wave mechanics determines the dynamics of a system’s movement completely or only sence in statistics?”. In this paper, Einstein used the Schodinger equation to obtain a representation of the kinetic energy, and used the non-Euclidean line element of the Configuration space to define the velocity component of a single particle, and return to determinism. But Bothe pointed out that when people considered a system composed of two subsystems, the wave function of the whole system can be decomposed into two simple products of the wave function of the two subsystems, but the hidden variables are dependent on each other. Einstein be-lieved that this was not acceptable, gave up the publication of the paper on the non-European line hidden variables theory. In the long-term controversy with the Copenhagen school, Einstein was convinced that the probability interpretation of the wave function was indispensable because of the incompleteness of quantum mechanics, but not the wave function probability led to the incompleteness of quantum mechanics. Any attempt to seek a complete explanation of quantum mechanics is inevitable to change the current formal system of quantum mechanics.

On the Existence of a Minimum Universal Speed of Physical Transmissions Associated with Matter Wave in Special Relativity

In this work, we show that it is possible to establish coordinate transformations between inertial reference frames in the theory of special relativity with a minimum universal speed of physical transmissions. The established coordinate transformations, referred to as modified Lorentz transformations because they have almost identical form to the Lorentz transformations, also comply with the requirement of invariance of the Minkowski line element. Particularly, the minimum universal speed can be associated with the phase speed of de Broglie matter wave. As application, we also discuss the possibility to formulate relativistic classical and quantum mechanics for the special relativity associated with the modified Lorentz transformations, which describes physical processes that represent an expansion or a collapsing of massive quantum particles.

An Orbit Determination Using SGP4 Propagator and Doppler Shifts for CubeSats

The two line elements(TLEs),released by the North American Aerospace Defense Command(NORAD),are chosen for CubeSats' mission operators.Unfortunately,they have errors and other accompanied problems,which cause large deviations in the in-track component.When a TLE value is available at a certain epoch,the dominant error is the angular error.It is proposed to correct the angular error by solving-for the mean argument of latitude at the desired epoch.A batch least squares technique and range rate measurements are used for the correction process.With the assistance of satellite tool kit(STK)software and Matlab,a simulation to verify the orbit determination(OD)technique is implemented.This paper provides an angular correction low cost OD method and presents a complete analysis for various test cases.This approach maintains high accuracy in cross-track and radial and makes great improvement in in-track at the same time,but it is exclusive for circular orbits.When it is applied to an elliptical orbit,the error will be unacceptable.Therefore,the angular error is corrected using the longitude of periapsis which totally mitigates the error at the epoch under consideration.For inclinations less than 20 o,the mean longitude is preferred for the angular correction as it provides more accuracy compared with the mean argument of latitude.

Revisit to frozen-in property of vorticity

Considering some simple topological properties of vorticity vector, the frozen-in property of vorticity herein is revis- ited. A vortex line, as is analogous to velocity vector along a streamline, is defined as such a coincident material （curve） line that connects many material fluid elements, on which the local vorticity vector for each fluid element is also tangent to the vortex line. The vortex line evolves in the same manner as the material line that it is initially associated with. The vortex line and the material line are both oriented to the same directions, and evolve with the proportional magnitude, just like being ＇frozen＇ or ＇glued＇ to the material elements of the fluid under the barotropic assumption. To relax the limits of incompressible and barotropic atmosphere, the frozen-in property is further derived and proved in the baroclinic case. Then two effective usages are given as examples. One is the derivation of potential vorticity conservation from the frozen-in property in both barotropic and baroclinic atmospheres, as a theory application, and the other is used to illuminate the vorticity generation and growth in ideal cases and real severe weather process, e.g., in squall line, tornado, and other se- vere convection weather with vortex. There is no necessity to derive vorticity equation, and this method is very intuitive to explain vorticity development qualitatively, especially for fast analysis for forecasters. Certainly, by investigating the evolution of vortex line, it is possible to locate the associated line element vector and its development on the basis of the frozen-in property of vorticity. Because it is simple and visualized, it manifests broad application prospects.

Ultrasonic beam steering using Neumann boundary condition in multiplysics

The traditional one-dimensional ultrasonic beam steering has time delay and is thus a complicated problem. A numerical model of ultrasonic beam steering using Neumann boundary condition in multiplysics is presented in the present paper. This model is based on the discrete wave number method that has been proved theoretically to satisfy the continuous conditions. The propagating angle of novel model is a function of the distance instead of the time domain. The propagating wave fronts at desired angles are simulated with the single line sources for plane wave. The result indicates that any beam angle can be steered by discrete line elements resources without any time delay.

STRESS INTENSITY FACTORS CALCULATION IN ANTI-PLANE FRACTURE PROBLEM BY ORTHOGONAL INTEGRAL EXTRACTION METHOD BASED ON FEMOL

For an anti-plane problem, the differential operator is self-adjoint and the corresponding eigenfunctions belong to the Hilbert space. The orthogonal property between eigenfunctions （or between the derivatives of eigenfunctions） of anti-plane problem is exploited. We developed for the first time two sets of radius-independent orthogonal integrals for extraction of stress intensity factors （SIFs）, so any order SIF can be extracted based on a certain known solution of displacement （an analytic result or a numerical result）. Many numerical examples based on the finite element method of lines （FEMOL） show that the present method is very powerful and efficient.

DYNAMIC ANALYSIS OF FLEXIBLE BODY WITH DEFINITE MOVING ATTITUTE

The nonlinear dynamic control equation of a flexible multi-body system with definite moving attitude is discussed. The motion of the aircraft in space is regarded as known and the influence of the flexible structural members in the aircraft on the motion and attitude of the aircraft is analyzed. By means of a hypothetical mode, the defor mation of flexible members is regarded as composed of the line element vibration in the axial direction of rectangular coordinates in space. According to Kane＇ s method in dynamics, a dynamic equation is established, which contains the structural stiffness matrix that represents the elastic deformation and the geometric stiffness matrix that represents the nonlinear deformation of the deformed body. Through simplification the dynamic equation of the influence of the planar flexible body with a windsurfboard structure on the spacecraft motion is obtained. The numerical solution for this kind of equation can be realized by a computer.