To investigate the feasibility for a helical line to be used as a pulse forming line （PFL）, the transmission characteristics of the helical transmission line is studied both theoretically and experimentally. The res...To investigate the feasibility for a helical line to be used as a pulse forming line （PFL）, the transmission characteristics of the helical transmission line is studied both theoretically and experimentally. The results indicate that it is feasible to employ a helical line as a long-pulse PFL, and the influence of its dispersion is negligible. Compared with a conventional coaxial PFL, the helical PFL with the same size can produce a longer pulse.展开更多
By using the 3D dynamic equations for small- and meso-scale disturbances, an investigation is performed on the heterotropic instability （including symmetric instability and traversal-type instability） of a zonal lin...By using the 3D dynamic equations for small- and meso-scale disturbances, an investigation is performed on the heterotropic instability （including symmetric instability and traversal-type instability） of a zonal line-like disturbance moving at any angle with respect to basic flow, arriving at the following results： （1） with linear shear available, the heterotropic instability of the disturbance will occur only when flow shearing happens in the direction of the line-like disturbance movement or in the direction perpendicular to the disturbance movement, with the heterotropic instability showing the instability of the internal inertial gravity wave; （2） in the presence of second-order non-linear shear, the disturbance of the heterotropic instability includes internal inertial gravity and vortex Rossby waves. For the zonal line-form disturbance under study, the vortex Rossby wave has its source in the second-order shear of meridional basic wind speed in the flow and propagates unidirectionally with respect to the meridional basic flow. As a mesoscale heterotropic instable disturbance, the vortex Rossby wave has its origin from the second shear of the flow in the direction perpendicular to the line-form disturbance and is independent of the condition in the direction parallel to the flow; （3） for general zonal line-like disturbances, if the second-order shear happens in the meridional wind speed, i.e., the second shear of the flow in the direction perpendicular to the line-form disturbance, then the heterotropic instability of the disturbance is likely to be the instability of a mixed Rossby-internal inertial gravity wave; （4） the symmetric instability is actually the instability of the internal inertial gravity wave. The second-order shear in the flow represents an instable factor for a symmetric-type disturbance; （5） the instability of a traversal-type disturbance is the instability of the internal inertial gravity wave when the basic flow is constant or only linearly sheared. With a second or nonlinear vertical shear of the basic flow taken into account, the instability of a traversal-type disturbance may be the instability of a mixed vortex Rossby - gravity wave.展开更多
This paper provides a review of the compact intense electron-beam accelerators (IEBAs) based on liquid pulse forming lines (PFLs) that havebeen developed at the National University of Defense Technology (NUDT) in Chin...This paper provides a review of the compact intense electron-beam accelerators (IEBAs) based on liquid pulse forming lines (PFLs) that havebeen developed at the National University of Defense Technology (NUDT) in China. The history and roadmap of the compact IEBAs used todrive high-power microwave (HPM) devices at NUDT are reviewed. The properties of both de-ionized water and glycerin as energy storagemedia are presented. Research into the breakdown properties of liquid dielectrics and the desire to maximize energy storage have resulted in theinvention of several coaxial PFLs with different electromagnetic structures, which are detailed in this paper. These high energy density liquidPFLs have been used to increase the performance of IEBA subsystems, based on which the SPARK (Single Pulse Accelerator with spark gaps)and HEART (High Energy-density Accelerator with Repetitive Transformer) series of IEBAs were constructed. This paper also discusses howthese compact IEBAs have been used to drive typical HPM devices and concludes by summarizing the associated achievements and theconclusions that can be drawn from the results.展开更多
The mechanically bonded CRA-lined pipe is developed to meet the need forcorrosion-resistant alloy steel pipe. Residual contact pressure at the interface of lined pipe isimportant factor that governs the quality of lin...The mechanically bonded CRA-lined pipe is developed to meet the need forcorrosion-resistant alloy steel pipe. Residual contact pressure at the interface of lined pipe isimportant factor that governs the quality of lined pipe. A simplified theoretical method ispresented to predict the residual contact pressure created by hydraulic pressure. The calculatingequation related hydro-forming pressure to the residual contact pressure between two metal faces isderived. And the validation of the proposed equation is accomplished by comparing its result tothose obtained by experimental investigation.展开更多
By exploring the space and the design techniques of roof garden in Frank Gehry's Walt Disney Concert Hall, this paper made further research on the combination of architectural functions and pedestrian fl ow lines,...By exploring the space and the design techniques of roof garden in Frank Gehry's Walt Disney Concert Hall, this paper made further research on the combination of architectural functions and pedestrian fl ow lines, and attempted to summarize the unique design techniques of Frank Gehry by analyzing his works, improve and develop design theories of roof garden, and attract more attention from the public to roof garden design.展开更多
With high rock slope in shiplock area, thin reinforced concrete lining walls are constructed for the shiplock system. The construction technology involves much complicated structures in formwork, frequent interference...With high rock slope in shiplock area, thin reinforced concrete lining walls are constructed for the shiplock system. The construction technology involves much complicated structures in formwork, frequent interference due to crossover working procedures, tight time schedule, high quality of reinforced concrete and showcase appearance requirements, hidden troubles affecting construction safety. With above-mentioned factors in consideration, a single-side-separated sliding formwork technology advanced from past sliding formwork experiences has been developed and applied successfully. This new technology is beneficial in quick and safe operation, capable to assure best quality and appearance of shiplock concrete works, and has filled up the gap in terms of construction sliding formwork in our country.展开更多
基金supported by the National 863 Project of China (Grant No. 2005AA835051)
文摘To investigate the feasibility for a helical line to be used as a pulse forming line （PFL）, the transmission characteristics of the helical transmission line is studied both theoretically and experimentally. The results indicate that it is feasible to employ a helical line as a long-pulse PFL, and the influence of its dispersion is negligible. Compared with a conventional coaxial PFL, the helical PFL with the same size can produce a longer pulse.
基金This work was sponsored jointly by the National Key Basic Research and Development Project of China(Grant No.2004CB418301)the National Natural Science Foundation of China(Grant No.40433007)the Jiangsu Province Natural Science Foundation of China(Grant No.BK2005141).
文摘By using the 3D dynamic equations for small- and meso-scale disturbances, an investigation is performed on the heterotropic instability （including symmetric instability and traversal-type instability） of a zonal line-like disturbance moving at any angle with respect to basic flow, arriving at the following results： （1） with linear shear available, the heterotropic instability of the disturbance will occur only when flow shearing happens in the direction of the line-like disturbance movement or in the direction perpendicular to the disturbance movement, with the heterotropic instability showing the instability of the internal inertial gravity wave; （2） in the presence of second-order non-linear shear, the disturbance of the heterotropic instability includes internal inertial gravity and vortex Rossby waves. For the zonal line-form disturbance under study, the vortex Rossby wave has its source in the second-order shear of meridional basic wind speed in the flow and propagates unidirectionally with respect to the meridional basic flow. As a mesoscale heterotropic instable disturbance, the vortex Rossby wave has its origin from the second shear of the flow in the direction perpendicular to the line-form disturbance and is independent of the condition in the direction parallel to the flow; （3） for general zonal line-like disturbances, if the second-order shear happens in the meridional wind speed, i.e., the second shear of the flow in the direction perpendicular to the line-form disturbance, then the heterotropic instability of the disturbance is likely to be the instability of a mixed Rossby-internal inertial gravity wave; （4） the symmetric instability is actually the instability of the internal inertial gravity wave. The second-order shear in the flow represents an instable factor for a symmetric-type disturbance; （5） the instability of a traversal-type disturbance is the instability of the internal inertial gravity wave when the basic flow is constant or only linearly sheared. With a second or nonlinear vertical shear of the basic flow taken into account, the instability of a traversal-type disturbance may be the instability of a mixed vortex Rossby - gravity wave.
基金This work was supported by the National Natural Science Foundation of China under Grant No.51677190the Hunan Provincial Natural Science Foundation of China under Grant No.2017JJ1005.
文摘This paper provides a review of the compact intense electron-beam accelerators (IEBAs) based on liquid pulse forming lines (PFLs) that havebeen developed at the National University of Defense Technology (NUDT) in China. The history and roadmap of the compact IEBAs used todrive high-power microwave (HPM) devices at NUDT are reviewed. The properties of both de-ionized water and glycerin as energy storagemedia are presented. Research into the breakdown properties of liquid dielectrics and the desire to maximize energy storage have resulted in theinvention of several coaxial PFLs with different electromagnetic structures, which are detailed in this paper. These high energy density liquidPFLs have been used to increase the performance of IEBA subsystems, based on which the SPARK (Single Pulse Accelerator with spark gaps)and HEART (High Energy-density Accelerator with Repetitive Transformer) series of IEBAs were constructed. This paper also discusses howthese compact IEBAs have been used to drive typical HPM devices and concludes by summarizing the associated achievements and theconclusions that can be drawn from the results.
文摘The mechanically bonded CRA-lined pipe is developed to meet the need forcorrosion-resistant alloy steel pipe. Residual contact pressure at the interface of lined pipe isimportant factor that governs the quality of lined pipe. A simplified theoretical method ispresented to predict the residual contact pressure created by hydraulic pressure. The calculatingequation related hydro-forming pressure to the residual contact pressure between two metal faces isderived. And the validation of the proposed equation is accomplished by comparing its result tothose obtained by experimental investigation.
文摘By exploring the space and the design techniques of roof garden in Frank Gehry's Walt Disney Concert Hall, this paper made further research on the combination of architectural functions and pedestrian fl ow lines, and attempted to summarize the unique design techniques of Frank Gehry by analyzing his works, improve and develop design theories of roof garden, and attract more attention from the public to roof garden design.
文摘With high rock slope in shiplock area, thin reinforced concrete lining walls are constructed for the shiplock system. The construction technology involves much complicated structures in formwork, frequent interference due to crossover working procedures, tight time schedule, high quality of reinforced concrete and showcase appearance requirements, hidden troubles affecting construction safety. With above-mentioned factors in consideration, a single-side-separated sliding formwork technology advanced from past sliding formwork experiences has been developed and applied successfully. This new technology is beneficial in quick and safe operation, capable to assure best quality and appearance of shiplock concrete works, and has filled up the gap in terms of construction sliding formwork in our country.
