Network virtualization is known as a promising technology to tackle the ossification of current Internet and will play an important role in the future network area. Virtual network embedding(VNE) is a key issue in net...Network virtualization is known as a promising technology to tackle the ossification of current Internet and will play an important role in the future network area. Virtual network embedding(VNE) is a key issue in network virtualization. VNE is NP-hard and former VNE algorithms are mostly heuristic in the literature.VNE exact algorithms have been developed in recent years. However, the constraints of exact VNE are only node capacity and link bandwidth.Based on these, this paper presents an exact VNE algorithm, ILP-LC, which is based on Integer Linear Programming(ILP), for embedding virtual network request with location constraints. This novel algorithm is aiming at mapping virtual network request(VNR) successfully as many as possible and consuming less substrate resources.The topology of each VNR is randomly generated by Waxman model. Simulation results show that the proposed ILP-LC algorithm outperforms the typical heuristic algorithms in terms of the VNR acceptance ratio, at least 15%.展开更多
Many products always operate under various complex environment conditions. To describe the dynamic influence of environment factors on their reliability, a method of reliability sensitivity analysis is proposed. In th...Many products always operate under various complex environment conditions. To describe the dynamic influence of environment factors on their reliability, a method of reliability sensitivity analysis is proposed. In this method, the location parameter is assumed as a function of relevant environment variables while the scale parameter is assumed as an unknown positive constant. Then, the location parameter function is constructed by using the method of radial basis function. Using the varied environment test data, the log-likelihood function is transformed to a generalized linear expression by describing the indicator as Poisson variable. With the generalized linear model, the maximum likelihood estimations of the model coefficients are obtained. With the reliability model, the reliability sensitivity is obtained. An instance analysis shows that the method is feasible to analyze the dynamic variety characters of reliability along with environment factors and is straightforward for engineering application.展开更多
Single Stage Capacitated Warehouse Location Problem (SSCWLP) has been attempted by few researchers in the past. These are Geoffrion and Graves [1], Sharma [2], Sharma [3] and Sharma and Berry [4]. In this paper we giv...Single Stage Capacitated Warehouse Location Problem (SSCWLP) has been attempted by few researchers in the past. These are Geoffrion and Graves [1], Sharma [2], Sharma [3] and Sharma and Berry [4]. In this paper we give a “vertical decomposition” approach to solve SSCWLP that uses Lagrangian relaxation. This way SSCWLP is broken into two versions of capacitated plant location problem (the CPLP_L and CPLP_R) by relaxing the flow balance constraints. For CPLP_R, we use well known Lagrangian relaxations given in literature (Christofides and Beasley [5] and Nauss [6]);and adopt them suitably for solving CPLP_L. We show theoretically in this paper that SSCWLP can be more efficiently solved by techniques of vertical decomposition developed in this paper than the method available in literature (Sharma and Berry [4]). Encouraging computational study is reported in this paper.展开更多
In this paper we study the problem of locating multiple facilities in convex sets with fuzzy parameters. This problem asks to find the location of new facilities in the given convex sets such that the sum of weighted ...In this paper we study the problem of locating multiple facilities in convex sets with fuzzy parameters. This problem asks to find the location of new facilities in the given convex sets such that the sum of weighted distances between new facilities and existing facilities is minimized. We present a linear programming model for this problem with block norms, then we use it for problems with fuzzy data. We also do this for rectilinear and infinity norms as special cases of block norms.展开更多
Linear source location of acoustic emission (AE) technique has been applied in the present paper for finding the source of material damage under fatigue loading. A plate type structure of ductile cast iron has been us...Linear source location of acoustic emission (AE) technique has been applied in the present paper for finding the source of material damage under fatigue loading. A plate type structure of ductile cast iron has been used to undergo fatigue damage in a servopulsing machine in the experiment. AE sensors were attached to the specimen for getting the time delay of AE signal propagations through the specimen. After receiving the time delay data of AE signals due to the damage initiation in the material for the provided fatigue loads, linear source location algorithm has been applied and the crack positions are identified. Before applying the technique, a series of pencil lead breaks (PLBs) tests have been conducted upon a ductile cast iron plate of same dimension for verifying the applied algorithm. According to the PLBs varification, the failure location of ductile cast iron (pearlite type) due to the fatigue loading has been characterized. In both experiments, the active ability of the proposed technique for source location of structural damage has been identified clearly and successfully.展开更多
The purpose of this review is to summarise the existing literature on the operational systems as to explain the current state of understanding on the coupled operational systems.The review only considers the linear op...The purpose of this review is to summarise the existing literature on the operational systems as to explain the current state of understanding on the coupled operational systems.The review only considers the linear optimisation of the operational systems.Traditionally,the operational systems are classified as decoupled,tightly coupled,and loosely coupled.Lately,the coupled operational systems were classified as systems of time-sensitive and time-insensitive operational cycle,systems employing one mix and different mixes of factors of production,and systems of single-linear,single-linear-fractional,and multi-linear objective.These new classifications extend the knowledge about the linear optimisation of the coupled operational systems and reveal new objective-improving models and new state-of-the-art methodologies never discussed before.Business areas affected by these extensions include product assembly lines,cooperative farming,gas/oil reservoir development,maintenance service throughout multiple facilities,construction via different locations,flights traffic control in aviation,game reserves,and tramp shipping in maritime cargo transport.展开更多
基金supported by the National Basic Research Program of China(973 Program)under Grant 2013CB329005
文摘Network virtualization is known as a promising technology to tackle the ossification of current Internet and will play an important role in the future network area. Virtual network embedding(VNE) is a key issue in network virtualization. VNE is NP-hard and former VNE algorithms are mostly heuristic in the literature.VNE exact algorithms have been developed in recent years. However, the constraints of exact VNE are only node capacity and link bandwidth.Based on these, this paper presents an exact VNE algorithm, ILP-LC, which is based on Integer Linear Programming(ILP), for embedding virtual network request with location constraints. This novel algorithm is aiming at mapping virtual network request(VNR) successfully as many as possible and consuming less substrate resources.The topology of each VNR is randomly generated by Waxman model. Simulation results show that the proposed ILP-LC algorithm outperforms the typical heuristic algorithms in terms of the VNR acceptance ratio, at least 15%.
文摘Many products always operate under various complex environment conditions. To describe the dynamic influence of environment factors on their reliability, a method of reliability sensitivity analysis is proposed. In this method, the location parameter is assumed as a function of relevant environment variables while the scale parameter is assumed as an unknown positive constant. Then, the location parameter function is constructed by using the method of radial basis function. Using the varied environment test data, the log-likelihood function is transformed to a generalized linear expression by describing the indicator as Poisson variable. With the generalized linear model, the maximum likelihood estimations of the model coefficients are obtained. With the reliability model, the reliability sensitivity is obtained. An instance analysis shows that the method is feasible to analyze the dynamic variety characters of reliability along with environment factors and is straightforward for engineering application.
文摘Single Stage Capacitated Warehouse Location Problem (SSCWLP) has been attempted by few researchers in the past. These are Geoffrion and Graves [1], Sharma [2], Sharma [3] and Sharma and Berry [4]. In this paper we give a “vertical decomposition” approach to solve SSCWLP that uses Lagrangian relaxation. This way SSCWLP is broken into two versions of capacitated plant location problem (the CPLP_L and CPLP_R) by relaxing the flow balance constraints. For CPLP_R, we use well known Lagrangian relaxations given in literature (Christofides and Beasley [5] and Nauss [6]);and adopt them suitably for solving CPLP_L. We show theoretically in this paper that SSCWLP can be more efficiently solved by techniques of vertical decomposition developed in this paper than the method available in literature (Sharma and Berry [4]). Encouraging computational study is reported in this paper.
文摘In this paper we study the problem of locating multiple facilities in convex sets with fuzzy parameters. This problem asks to find the location of new facilities in the given convex sets such that the sum of weighted distances between new facilities and existing facilities is minimized. We present a linear programming model for this problem with block norms, then we use it for problems with fuzzy data. We also do this for rectilinear and infinity norms as special cases of block norms.
文摘Linear source location of acoustic emission (AE) technique has been applied in the present paper for finding the source of material damage under fatigue loading. A plate type structure of ductile cast iron has been used to undergo fatigue damage in a servopulsing machine in the experiment. AE sensors were attached to the specimen for getting the time delay of AE signal propagations through the specimen. After receiving the time delay data of AE signals due to the damage initiation in the material for the provided fatigue loads, linear source location algorithm has been applied and the crack positions are identified. Before applying the technique, a series of pencil lead breaks (PLBs) tests have been conducted upon a ductile cast iron plate of same dimension for verifying the applied algorithm. According to the PLBs varification, the failure location of ductile cast iron (pearlite type) due to the fatigue loading has been characterized. In both experiments, the active ability of the proposed technique for source location of structural damage has been identified clearly and successfully.
基金Acknowledgements： This work is supported by National Natural Science Foundation of China （No. 60673084） and Hunan Provincial Natural Science Foundation of China （No. 06JJ4075）.
文摘The purpose of this review is to summarise the existing literature on the operational systems as to explain the current state of understanding on the coupled operational systems.The review only considers the linear optimisation of the operational systems.Traditionally,the operational systems are classified as decoupled,tightly coupled,and loosely coupled.Lately,the coupled operational systems were classified as systems of time-sensitive and time-insensitive operational cycle,systems employing one mix and different mixes of factors of production,and systems of single-linear,single-linear-fractional,and multi-linear objective.These new classifications extend the knowledge about the linear optimisation of the coupled operational systems and reveal new objective-improving models and new state-of-the-art methodologies never discussed before.Business areas affected by these extensions include product assembly lines,cooperative farming,gas/oil reservoir development,maintenance service throughout multiple facilities,construction via different locations,flights traffic control in aviation,game reserves,and tramp shipping in maritime cargo transport.
