A Novel Method for Forecasting Freak Wave Occurrence in A Short Crested Coastal Sea

In order to forecast the distribution of crest amplitudes and the occurrence of freak waves in a short crested coastal sea,a novel transformed linear simulation method is initially proposed in this paper.A Hermite transformation model expressed as a monotonic cubic polynomial serves as the foundation for the novel simulation technique.The wave crest amplitude exceedance probabilities of two sea states-one with a directional wave spectrum based on the measured wave elevation data at the Yura coast and the other with a typical directional JONSWAP wave spectrum-have been predicted using the novel simulation method that has been proposed.The likelihood that a particular critical wave crest amplitude will be exceeded is directly correlated with the probability that freak waves will occur.It is shown that the novel simulation approach suggested can provide predictions that are more precise than those obtained from the Rayleigh crest amplitude distribution model,the Jahns and Wheeler crest amplitude distribution model,or the conventional linear simulation method.This study also demonstrated that the nonlinear simulation method is less effective than the novel simulation method in terms of efficiency.

An Improved Robust Model Predictive Control Approach to Systems with Linear Fractional Transformation Perturbations

In this paper, a robust model predictive control approach is proposed for a class of uncertain systems with time-varying, linear fractional transformation perturbations. By adopting a sequence of feedback control laws instead of a single one, the control performance can be improved and the region of attraction can be enlarged compared with the existing model predictive control （MPC） approaches. Moreover, a synthesis approach of MPC is developed to achieve high performance with lower on-line computational burden. The effectiveness of the proposed approach is verified by simulation examples.

THE BLUE AND MINQUE IN GAUSS-MARKOFF MODEL WITH LINEAR TRANSFORMATION OF THE OBSERVABLE VARIABLES

For a singular linear model A = （y, Xβ, σ2 V） and its transformed model MF = （Fy, FXβ, σ 2FVF＇）, where V is nonnegative definite and X can be rank-deficient, the expressions for the differences of the estimates for the vector of FXβ and the variance factor σ2 are given. Moreover, the necessary and sufficient conditions for the equalities of the estimates for the vector of FXβ and the variance factor σ2 are also established. In the meantime, works in Baksalary and Kala （1981） are strengthened and consequences in Puntanen and Nurhonen （1992）, and Puntanen （1996） are extended.

On the Group of Units for the Ring of Linear Transformations

In this paper, we introduce a practical method for obtaining the structure of thegroup of units for the ring of linear transformations of a vector space over an arbitrary field,and we give a further generalization of the result in [3].

A DECOMPOSITION DEPENDED ON DIRECTIONS FOR NONSINGULAR LINEAR TRANSFORMATION

In this paper. we give a decomposition depending on p(1≤p≤n-2) orthonormaldirections assigned for nonsingular linear transformation F on a n-dimension (n≥3)Euclidean space En, and then prove foal there exist q(q=n-p) quasi-Principaldirections.for F depending on the preceding p orthonormal directions. As applicance ofthe preceding result, we derive that there exist at least two orthonormal principaldirections of strain in arbitrary plane of body which is in homogeneous deformation,and strain energy density is.function of 5 real numbers under arbitrary quasi-principalbase.for the preceding nonsingular linear transformation.

Linear Transformation Theory of Quantum Field Operators and Its Applications

We extend the linear quantum transformation theory to the case of quantum field operators. The corresponding general transformation expressions of CPT transformations and gauge field transformations are considered as its applications.

ON THE DECOMPOSITION OF COMPLEX VECTOR SPACES AND THE JORDAN CANONICAL FORM OF COMPLEX LINEAR TRANSFORMATIONS

New objects characterizing the structure of complex linear transformations areintroduced. These new objects yield a new result for the decomposition of complexvector spaces relative to complex lrnear transformations and provide all Jordan basesby which the Jordan canonical form is constructed. Accordingly, they can result in thecelebrated Jordan theorem and the third decomposition theorem of space directly. and,moreover, they can give a new deep insight into the exquisite and subtle structure ofthe Jordan form. The latter indicates that the Jordan canonical form of a complexlinear transformation is an invariant structure associated with double arbitrary. choices.

From Translation to Linear and Linear Canonical Transformations

In order to obtain with simplicity the known and new properties of linear canonical transformations (LCTs), we show that any relation between a couple of operators (A,B) having commutator identical to unity, called dual couple in this work, is valuable for any other dual couple, so that from the known translation operator exp(a∂x) one may obtain the explicit form and properties of a category of linear and linear canonical transformations in 2N-phase spaces. Moreover, other forms of LCTs are also obtained in this work as so as the transforms by them of functions by integrations as so as by derivations. In this way, different kinds of LCTs such as Fast Fourier, Fourier, Laplace, Xin Ma and Rhodes, Baker-Campbell-Haussdorf, Bargman transforms are found again.

Research on the File Encryption and Programming based on Matrix Transformation

Any linear transform matrix can be used to easily calculate a consistent form, and a plurality of conversion can be easily connected together by matrix multiplication. When performing file transfers, you can encrypt files matrix transformation. Article presents a matrix-based electronic document encryption and decryption algorithm, which relies on a special class of matrices combinatorial problems, the method to improve the security of electronic document system is feasible and effective, and finally give the source code and programming software.

Classical and Quantum Behavior of Generalized Oscillators in Terms of Linear Canonical Transformations

The quantum mechanical relationships between time-dependent oscillators, Hamilton-Jacobi theory and an invariant operator are clarified by making reference to a system with a generalized oscillator. We introduce a linear transformation in position and momentum, and show that the correspondence between classical and quantum transformations is exactly one-to-one. We found that classical canonical transformations are constructed from quantum unitary transformations as long as we are concerned with linear transformations. We also show the relationship between the invariant operator and a linear transformation.

Mechatronic Modeling and Domain Transformation of Multi-physics Systems

The enhanced definition of Mechatronics involves the four underlying characteristics of integrated,unified,unique,and systematic approaches.In this realm,Mechatronics is not limited to electro-mechanical systems,in the multi-physics sense,but involves other physical domains such as fluid and thermal.This paper summarizes the mechatronic approach to modeling.Linear graphs facilitate the development of state-space models of mechatronic systems,through this approach.The use of linear graphs in mechatronic modeling is outlined and an illustrative example of sound system modeling is given.Both time-domain and frequency-domain approaches are presented for the use of linear graphs.A mechatronic model of a multi-physics system may be simplified by converting all the physical domains into an equivalent single-domain system that is entirely in the output domain of the system.This approach of converting(transforming)physical domains is presented.An illustrative example of a pressure-controlled hydraulic actuator system that operates a mechanical load is given.

Radial Basis Approximations Based BEMD for Enhancement of Non-Uniform Illumination Images

An image can be degraded due to many environmental factors like foggy or hazy weather,low light conditions,extra light conditions etc.Image captured under the poor light conditions is generally known as non-uniform illumination image.Non-uniform illumination hides some important information present in an image during the image capture Also,it degrades the visual quality of image which generates the need for enhancement of such images.Various techniques have been present in literature for the enhancement of such type of images.In this paper,a novel architecture has been proposed for enhancement of poor illumination images which uses radial basis approximations based BEMD(Bi-dimensional Empirical Mode Decomposition).The enhancement algorithm is applied on intensity and saturation components of image.Firstly,intensity component has been decomposed into various bi-dimensional intrinsic mode function and residue by using sifting algorithm.Secondly,some linear transformations techniques have been applied on various bidimensional intrinsic modes obtained and residue and further on joining the transformed modes with residue,enhanced intensity component is obtained.Saturation part of an image is then enhanced in accordance to the enhanced intensity component.Final enhanced image can be obtained by joining the hue,enhanced intensity and enhanced saturation parts of the given image.The proposed algorithm will not only give the visual pleasant image but maintains the naturalness of image also.

Mathematical Aspects of SU (2) and SO(3,R) Derived from Two-Mode Realization in Coordinate-Invariant Form

Some mathematical aspects of the Lie groups SU (2) and in realization by two pairs of boson annihilation and creation operators and in the parametrization by the vector parameter instead of the Euler angles and the vector parameter c of Fyodorov are developed. The one-dimensional root scheme of SU (2) is embedded in two-dimensional root schemes of some higher Lie groups, in particular, in inhomogeneous Lie groups and is represented in text and figures. The two-dimensional fundamental representation of SU (2) is calculated and from it the composition law for the product of two transformations and the most important decompositions of general transformations in special ones are derived. Then the transition from representation of SU (2) to of is made where in addition to the parametrization by vector the convenient parametrization by vector c is considered and the connections are established. The measures for invariant integration are derived for and for SU (2) . The relations between 3D-rotations of a unit sphere to fractional linear transformations of a plane by stereographic projection are discussed. All derivations and representations are tried to make in coordinate-invariant way.

Blind recognition of k/n rate convolutional encoders from noisy observation

Blind recognition of convolutional codes is not only essential for cognitive radio, but also for non-cooperative context. This paper is dedicated to the blind identification of rate k/n convolutional encoders in a noisy context based on Walsh-Hadamard transformation and block matrix (WHT-BM). The proposed algorithm constructs a system of noisy linear equations and utilizes all its coefficients to recover parity check matrix. It is able to make use of fault-tolerant feature of WHT, thus providing more accurate results and achieving better error performance in high raw bit error rate (BER) regions. Moreover, it is more computationally efficient with the use of the block matrix (BM) method. © 2017 Beijing Institute of Aerospace Information.

Quantum fluctuations of mesoscopic damped double resonance RLC circuit with mutual capacitance-inductance coupling

Based on the scheme of damped harmonic oscillator quantization and thermo-field dynamics （TFD）, the quantization of mesoscopic damped double resonance RLC circuit with mutual capacitance-inductance coupling is proposed. The quantum fluctuations of charge and current of each loop in a squeezed vacuum state are studied in the thermal excitation case. It is shown that the fluctuations not only depend on circuit inherent parameters, but also rely on excitation quantum number and squeezing parameter. Moreover, due to the finite environmental temperature and damped resistance, the fluctuations increase with the temperature rising, and decay with time.

A Multi-Gap Multi-Channel Gas Switch for the Linear Transformer Driver

A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.

State Feedback Control for a Class of Fractional Order Nonlinear Systems

Using the Lyapunov function method, this paper investigates the design of state feedback stabilization controllers for fractional order nonlinear systems in triangular form, and presents a number of new results. First, some new properties of Caputo fractional derivative are presented, and a sufficient condition of asymptotical stability for fractional order nonlinear systems is obtained based on the new properties. Then, by introducing appropriate transformations of coordinates, the problem of controller design is converted into the problem of finding some parameters, which can be certainly obtained by solving the Lyapunov equation and relevant matrix inequalities. Finally, based on the Lyapunov function method, state feedback stabilization controllers making the closed-loop system asymptotically stable are explicitly constructed. A simulation example is given to demonstrate the effectiveness of the proposed design procedure. © 2014 Chinese Association of Automation.

Non-Metric CCD Camera Calibration Algorithm in a Digital Photogrammetry System

Camera calibration is a critical process in photogrammetry and a necessary step to acquire 3D information from a 2D image. In this paper, a flexible approach for CCD camera calibration using 2D direct linear transformation （DLT） and bundle adjustment is proposed. The proposed approach assumes that the camera interior orientation elements are known, and addresses a new closed form solution in planar object space based on homogenous coordinate representation and matrix factorization. Homogeneous coordinate representation offers a direct matrix correspondence between the parameters of the 2D DLT and the collinearity equation. The matrix factorization starts by recovering the elements of the rotation matrix and then solving for the camera position with the collinearity equation. Camera calibration with high precision is addressed by bundle adjustment using the initial values of the camera orientation elements. The results show that the calibration precision of principal point and focal length is about 0.2 and 0.3 pixels respectivelv, which can meet the requirements of close-range photogrammetry with high accuracy.

Near field 3-D imaging approach for joint high-resolution imaging and phase error correction

This paper combines compressed sensing (CS) imaging theory and range migration algorithm (RMA), and then proposes a near-field three-dimensional (3-D) imaging approach for joint high-resolution imaging and phase error correction. Firstly, a sparse measurement matrix construction method based on a logistic sequence is proposed, which conducts nonlinear transformation for the determined logistic sequence, making it obey uniform distribution, then conducts sign function mapping, and generates the pseudorandom sequence with Bernoulli distribution, thus leading to good signal recovery under down-sampling and easy availability for engineering realization. Secondly, in combination with the RMA imaging approach, the dictionary with all scene information and phase error correction is constructed for CS signal recovery and error correction. Finally, the non-quadratic solution model jointing imaging and phase error correction based on regularization is built, and it is solved by two steps - the separable surrogate functionals (SSF) iterative shrinkage algorithm is adopted to realize target scattering estimate; the iteration mode is adopted for the correction of the dictionary model, so as to achieve the goal of error correction and highly-focused imaging. The proposed approach proves to be effective through numerical simulation and real measurement in anechoic chamber. The results show that, the proposed approach can realize high-resolution imaging in the case of less data; the designed measurement matrix has better non-coherence and easy availability for engineering realization. The proposed approach can effectively correct the phase error, and achieve highly-focused target image. © 2017 Beijing Institute of Aerospace Information.

Numerical Analysis of the Output-Pulse Shaping Capability of Linear Transformer Drivers

Output-pulse shaping capability of a linear transformer driver （LTD） module under different conditions is studied, by conducting the whole circuit model simulation by using the PSPICE code. Results indicate that a higher impedance profile of the internal transmission line would lead to a wider adjustment range for the output current rise time and a narrower adjustment range for the current peak. The number of cavities in series has a positive effect on the output- pulse shaping capability of LTD. Such an improvement in the output-pulse shaping capability can primarily be ascribed to the increment in the axial electric length of LTD. For a triggering time interval longer than the time taken by a pulse to propagate through the length of one cavity, the output parameters of LTD could be improved significantly. The present insulating capability of gas switches and other elements in the LTD cavities may only tolerate a slightly longer deviation in the triggering time interval. It is feasible for the LTD module to reduce the output current rise time, though it is not useful to improve the peak power effectively.