Rapid Constructing a Genetic Linkage Map by AFLP Technique and Mapping a New Gene tms5

In this study, we reported the repaid construction of a molecular marker linkage map of rice (Oryza sativa L.). An F-2 population from the cross between Annong S-1 and Nanjing 11 was used to construct a genetic linkage map of rice. Total of 142 newly screened AFLP markers and 30 anchor markers (25 SSR markers and 5 RFLP markers) were mapped on the 12 chromosomes covering 1537.4 cM of rice genome. The average interval between these markers was 9.0 cM. The total work which usually was finished in more than one year was finished within only 3 months by one person. This is the first plant AFLP map developed in China. A new thermosensitive genic male sterile gene in rice, tms5, was Egged and mapped onto chromosome 2 during the development of the linkage map.

Genetic Analysis and Linkage Mapping in a Resource Pig Population Using Microsatellite Markers

The use of markers and linkage map construction are important for QTL mapping in pigs. In this article, the genetic characteristics were studied and the linkage map was constructed in a pig resource population including 214 individuals by typing 39 microsatellite marker loci on Sus scrofa chromosomes, SSC4, SSC6, SSC7, SSC8, and SSC13. Results indicated that the average allele number, the average observed beterozygosity （Ho）, and the average polymorphism information content （PIC） in F1 and F2 population were 3.2, 0.528, 0.463 and 3.2, 0.496, 0.447, respectively. In the pig resource population, the average informative meiosis （IM） was 217.4 （44-316）, and the average linkage map length between the two sexes on the five chromosomes were 172.3 cM （SSC4）, 168.7 cM （SSC6）, 191.7 cM （SSC7）, 197.3 cM （SSC8）, and 178.3 cM （SSC13）. The orders of microsatellite marker loci in the linkage maps were identical to, but the length was greater than, those of USDA-MARC reference map. The results of this research showed the genetic relationship and genetic characteristics of the microsatellite markers in the pig resource family population, and the linkage map could be used to for QTL mapping in the subsequent study.

Construction of Molecular Genetic Linkage Map Based on an RIL Population of Rice and Detection of QTLs for Tiller Angle

In this study, an RIL （recombinant inbred line） population containing 240 lines was developed by single seed descent method （SSD） based on a parent com- bination of small-grain indica cultivar Kasalath and large-grain japanica cultivar TD70 with significant differences in plant type traits, to construct the molecular genetic linkage map. Totally 838 SSR （Simple Sequence Repeat） markers were used for polymorphism screening between parents, 302 SSR markers with polymorphism were detected, with a frequency of 36.04%; 141 SSR markers with clear amplified bands and uniform distribution in the genome were finally used for genotype analysis of the RIL population. According to the experimental results, the frequency of male and female genotype in this RIL population was respectively 53% and 47%, suggesting good balance in population structure. A molecular genetic linkage map of rice was constructed by 141 markers based on a RIL population of 240 lines, with a total genetic distance of about 1 832.47 cM covering all 12 chromosomes, an average genetic distance between markers of 12.70 cM and a range of genetic distance be- tween markers of 0.43-36.11 cM, which is consistent with basic requirements of quantitative trait locus （QTL） mapping. Except for few markers on chromosomes 1 and 8, the order and location of markers is similar to the published sequences of Nipponbare. QTL analysis for the tiller angle was conducted with this RIL population of 240 lines, and results showed that three QTLs controlling tiller angle were detected on chromosome 8, 9 and 11, which were named qTA8, qTA9 and qTA11, with a contribution rate of 4.10%, 26.08% and 4.35%, respectively. To be specific, qTA9 contained Tiller Angle Controlling （TAC1） gene. The construction of this molecular genetic linkage map laid the foundation for genetic analysis and QTL mapping of various traits in the progeny of indica and japonica.

Construction of Genetic Linkage Map Based on SSR Markers in Peanut(Arachis hypogaea L.)

Molecular genetic maps of crop species can be used in a variety of ways in breeding and genomic research such as identification and mapping of genes and quantitative trait loci （QTLs） for morphological, physiological and economic traits of crop species. However, a comprehensive genetic linkage map for cultivated peanut has not yet been developed due to the extremely low frequency of DNA polymorphism in cultivated peanut. In this study, 142 recombinant inbred lines （RILs） derived from a cross between Yueyou 13 and Zhenzhuhei were used as mapping population in peanut （Arachis hypogaea L.）. A total 652 pairs of genomic-SSR primer and 392 pairs of EST-SSR primer were used to detect the polymorphisms between the two parents. 141 SSR primer pairs, 127 genomic-SSR and 14 EST-SSR ones, which can be used to detect polymorphisms between the two parents, were selected to analyze the RILs population. Thus, a linkage genetic map which consists of 131 SSR loci in 20 linkage groups, with a coverage of 679 cM and an average of 6.12 cM of inter-maker distance was constructed. The putative functions of 12 EST-SSR markers located on the map were analyzed. Eleven showed homology to gene sequences deposited in GenBank. This is the first report of construction of a comprehensive genetic map with SSR markers in peanut （Arachis hypogaea L.）. The map presented here will provide a genetic framework for mapping the qualitative and quantitative trait in peanut.

Development of a high-density SSR genetic linkage map in sweet potato

Simple sequence repeat(SSR) markers have been proved to be a very powerful tool for quantitative trait locus(QTL) mapping, marker-assisted selection and comparative genomics research in many crop species. However, a high-density SSR genetic linkage map is still lacking because there are only a few SSR markers available in sweet potato. In this study, a total of 2545 simple sequence repeat(SSR) primer pairs, including 1215 genomic SSR(gSSR) primer pairs and 1330 BES-SSR(bSSR) primer pairs designed from the genome sequence and BAC-end sequence of sweet potato, respectively, were screened with sweet potato cultivars Luoxushu 8 and Zhengshu 20 and their randomly sampled two F1 individuals and 571 of them generated polymorphic bands. The selected 571 polymorphic SSR primer pairs and 35 EST-based SSR(eSSR) primer pairs developed at our laboratory were used to genotype 240 F1 individuals derived from a cross between Luoxushu 8 and Zhengshu 20. A double pseudo-test-cross strategy was applied for linkage analysis. The Luoxushu 8 map included 90 linkage groups with 5057 SSR markers and covered 13,299.9 cM with a marker density of 2.6 cM, and the Zhengshu 20 map contained 90 linkage groups with 3009 SSR markers and covered 11,122.9 cM with a marker density of 3.7 cM. Fifteen homologous groups were identified in both parent maps. These are the first SSR linkage maps consisting of the complete 90 linkage groups and 15 homologous groups, which are consistent with the autohexaploid nature of sweetpotato, and are also the linkage maps with the highest SSR marker density reported to date.These results provide a basis for QTL mapping, marker-assisted breeding and comparative genomics research of sweet potato.

A SSR Linkage Map of Maizex Teosinte F_2 Population and Analysis of Segregation Distortion

In this study,a linkage genetic map was constructed using a F2 population derived from a cross between a elite maize inbred,B73,and its progenitor,Teosinte（Z.mays ssp.mexicana）,through 205 simple sequence repeat（SSR） markers and one morphological marker.By Mapmaker 3.0,polymorphic markers were clustered into 10 groups,covering 10 chromosomes of maizexteosinte,with a total length of 2 002.4 cM and an average interval of 9.7 cM.Genotyping errors were detected using R/QTL（LOD=2.0） in 109 markers referring to 176 individuals,distributed across all 10 chromosomes with a ratio 1.2%.Projected error loci were re-run and 304 out of the 460 were confirmed as errors and replaced.A new linkage map was constructed,in which markers maintained the same order but the total map length decreased to 1 947.8 cM,with an average interval of 9.4 cM between markers.In total,25.2%（P0.05） markers were identified to have segregation distortion,in which 34.6% deviated towards the pollination parent（B73）,30.8% deviated towards Teosinte,32.7% deviated towards heterozygote and 1.9% deviated towards both parents.This map was also compared with published maizexteosinte and maize IBM map.

A genetic linkage map of marine shrimp Penaeus (Fenneropenaeus) chinensis based on AFLP, SSR, and RAPD markers

The Chinese shrimp Penaeus (Fenneropaeneus) chinensis is an important species in marine fishery and aquaculture in China. A female Chinese shrimp Penaeus (Fenneropaeneus) chinensis was captured from west coast of the Korean peninsula and mated with a "Yellow Sea No. 1" male to produce the first filial generation (F1) 100 F2 full-sib progeny from brother-sister crosses between F1 families was used for the mapping study. A genetic linkage map of the Chinese shrimp was constructed, based on 354 markers, including 300 amplified fragment length polymorphism (AFLP) markers, 42 microsatellite (SSR) markers, and 12 randomly amplified polymorphism (RAPD) markers. Forty-seven linkage groups (LGs) were identified. The total map length was 4 580.5 cM, with an average spacing of 11.3 cM, covering 75.8% of the estimated genome size. The construction of this genetic linkage map was part of a genetic breeding program. This linkage map will contribute to the discovery of genes and quantitative trait loci (QTLs) in Chinese shrimp.

A Genetic Linkage Map of Brassica campestris L.ssp. pekinensis (syn. B. rapa L. ssp. pekinensis)

A molecular genetic map of Chinese cabbage was constructed with a 102 recombinant inbred (RI) population from a cross of two cultivated Chinese cabbage lines 177 and 276, using AFLP and RAPD markers. 352 markers including 265 AFLP markers and 87 RAPD markers were integrated into 17 linkage groups. It covered a total of 2 665. 7 cM with an average interval of 7. 6 cM. AFLP marker is efficient for map construction while it easily forms clusters to cause big gaps in map. A total of 13.92 % abnormal segregation markers distributed in the map. The molecular genetic map is fundamental for gene localization, comparative genomics, and QTL mapping of important agronomic traits.

A genetic linkage map with 178 SSR and 1901 SNP markers constructed using a RIL population in wheat (Triticum aestivum L.)

The construction of high density genetic linkage map provides a powerful tool to detect and map quantitative trait loci(QTLs) controlling agronomically important traits. In this study, simple sequence repeat(SSR) markers and Illumina 9K i Select single nucleotide polymorphism(SNP) genechip were employed to construct one genetic linkage map of common wheat(Triticum aestivum L.) using 191 recombinant inbred lines(RILs) derived from cross Yu 8679×Jing 411. This map included 1 901 SNP loci and 178 SSR loci, covering 1 659.9 c M and 1 000 marker bins, with an average interval distance of 1.66 c M. A, B and D genomes covered 719.1, 703.5 and 237.3 c M, with an average interval distance of 1.66, 1.45 and 2.9 c M, respectively. Notably, the genetic linkage map covered 20 chromosomes, with the exception of chromosome 5D. Bioinformatics analysis revealed that 1 754(92.27%) of 1 901 mapped SNP loci could be aligned to 1 215 distinct wheat unigenes, among which 1 184(97.4%) were located on o ne single chromosome, and the rest 31(2.6%) were located on 2 to 3 chromosomes. By performing in silico comparison, 214 chromosome deletion bin-mapped expressed sequence tags(ESTs), 1 043 Brachypodium genes and 1 033 rice genes were further added onto the genetic linkage map. This map not only integrated genetic and physical maps, SSR and SNP loci, respectively, but also provided the information of Brachypodium and rice genes corresponding to 1 754 SNP loci. Therefore, it will be a useful tool for comparative genomics analysis, fine mapping of QTL/gene controlling agronomically important traits and marker-assisted selection breeding in wheat.

An AFLP Genetic Linkage Map of Pacific Abalone(Haliotis discus hannai)

A genetic linkage map of Pacific abalone(Haliotis discus hannai) was constructed using AFLP markers based on a two-way pseudo-testcross strategy in a full-sib family. With 33 primer combinations,a total of 455 markers(225 from the female parent and 230 from the male parent) segregated in a 1:1 ratio,corresponding to DNA polymorphism:heterozygous in one parent and null in the other. The female framework map consisted of 174 markers distributed in 18 linkage groups,equivalent to the H. discus hannai haploid chromosome number,and spanning a total length of 2031.4 cM,with an average interval of 13.0 cM between adjacent markers. The male framework map consisted of 195 markers mapped on 19 linkage groups,spanning a total length of 2273.4 cM,with an average spacing of 12.9 cM between adjacent markers. The estimated coverage for the framework linkage maps was 81.2% for the female and 82.1% for the male,on the basis of two estimates of genome length. Fifty-two markers(11.4%) remained unlinked. The level of segregation distortion observed in this cross was 20.4%. These linkage maps will serve as a starting point for linkage studies in the Pacific abalone with potential application for marker-assisted selection in breeding programs.

Genome-wide association and linkage mapping strategies reveal genetic loci and candidate genes of phosphorus utilization in soybean

Insufficient available phosphorus in soil has become an important limiting factor for the improvement of yield and quality in soybean. The mining of QTLs and candidate genes controlling soybean phosphorus utilization related traits is a necessary strategy to solve this problem. In this study, 11 phosphorus utilization related traits of a natural population of 281 typical soybean germplasms and a recombinant inbred line(RIL) population of 270 lines were evaluated under different phosphorus conditions at two critical stages: the four-leaf stage as the seedling critical stage was designated as the Tstage, and the six-leaf stage as the flowering critical stage was designated as the Tstage. In total, 200 single nucleotide polymorphism(SNP) loci associated with phosphorus utilization related traits were identified in the natural population, including 91 detected at the Tstage, and 109 detected at the Tstage. Among these SNP loci, one SNP cluster(s715611375, ss715611377, ss715611379 and ss715611380) on Gm12 was shown to be significantly associated with plant height under the low phosphorus condition at the Tstage, and the elite haplotype showed significantly greater plant height than the others. Meanwhile, one pleiotropic SNP cluster(ss715606501, ss715606506 and ss715606543) on Gm10 was found to be significantly associated with the ratio of root/shoot, root and total dry weights under the low phosphorus condition at the Tstage, and the elite haplotype also presented significantly higher values for related characteristics under the phosphorus starvation condition. Furthermore, four co-associated SNP loci(ss715597964, ss715607012, ss715622173 and ss715602331) were identified under the low phosphorus condition at both the Tand Tstages, and 12 QTLs were found to be consistent with these genetic loci in the RIL population. More importantly, 14 candidate genes, including MYB transcription factor, purple acid phosphatase, sugar transporter and HSP20-like chaperones superfamily genes, etc., showed differential expression levels after low phosphorus treatment, and three of them were further verified by q RT-PCR. Thus, these genetic loci and candidate genes could be applied in markerassisted selection or map-based gene cloning for the genetic improvement of soybean phosphorus utilization.

Constructing the wolfberry(Lycium spp.) genetic linkage map using AFLP and SSR markers

Genetic linkage maps are important for quantitative trait locus(QTL) and marker-assisted selection breeding. The wolfberry(Lycium spp.) is an important food and traditional medicine in China. However, few construction genetic linkage maps have been reported because of the lack of genomic and genetic resources. In this study, a population of 89 F1 seedings was derived from a cross between two heterozygous parents, L. chinense var. potaninii ‘BF-01’(female)and L. barbarum var. auranticarpum ‘NH-01’(male), in order to construct a genetic linkage map using simple sequence repeat(SSR) and amplified fragment length polymorphism(AFLP) markers based on the double pseudo-test cross mapping strategy. The resulting genetic map consisted of 165 markers(74 AFLPs and 91 SSRs) distributed across 12 linkage groups and spanned a total length of 557.6 cM with an average distance of 3.38 cM between adjacent markers.The 12 linkage groups contained 3 to 21 markers and ranged in length from 8.6 to 58.3 cM. Twenty-nine segregated markers distributed in the map were mainly located on LG4 and LG9 linkage groups at P<0.05. This is the first linkage map of Lycium species using SSR and AFLP markers, which can serve as basis for improving genes and selective breeding of the genome assembly.

A Genetic Linkage Map of Brassica rapa Based on AFLP Markers

A F2 mapping population was developed by crossing a Chinese cabbage-pe-tsai variety CC156 and an oil type Rapid cycling RC144 which were different from each other in morphology, maturity, self-compatibility, plant height, etc. Using 244 AFLP markers a map was constructed containing 10 main linkage groups covering a total distance of 857 cM, corresponding to 3.5 cM per marker. Length of linkage groups varied from 43 to 125 cM and the number of AFLP markers linkage to each group ranged from 7 to 41.

Polymorphism analysis of microsatellites and construction of linkage map in part regions of four chromosomes in chicken

Based on chicken＇ consensus map issued in 2000, 17 microsatellites near 4 candidate genes such as IGF2, OBR, GDF8 and APOA 1 in 4 chromosomes （chromosome 5, 7, 8 and 24） were chosen for polymorphism analysis and construction of linkage map. Combining the technique of PCR and the fluorescent semi-automated detection, genome scanning was performed for 440 chickens, which was derived from China Agricultural University chicken resource families within three generations. The individuals of this resource families were genotyped. The results showed that the number of alleles ranged from 4 to 14; heterozygosity （H） of markers was between 0.3116 and 0.9148. Polymorphic information content （PIC） varied from 0.2672 to 0.8679. Microsatellites along with above-mentioned 4 candidate genes doing as general markers were used to construct linkage map. The spans of 4 linkage maps constructed in the part region of chromosome 5, 7, 8 and 24 were 263.5, 79.9, 206.2 and 104.2 cM, respectively. The order of markers was consistent with that of counterpart of reported consensus map. However, The spans of linkage map were larger than that of consensus map. The constructed linkage maps laid the foundation for mapping quantitative trait loci （QTL） responsible for economically important traits in chicken.

Rapid Construction of a High-Density Rice Linkage Map by High Efficiency Genome Scanning (HEGS) System

High-density linkage maps are essential tools for genome analysis of various biological traits. Our developed compact multi-gel system, HEGS （high efficiency genome scanning） is a high-throughput and high-cost-performance electrophoresis apparatus. Using this system, a high-density （average interval 2.3 cM） map with 1 065 AFLP and 63 SSR markers was constructed from recombinant inbred lines of a japonica and indica hybrid in just two months of electrophoreses by a single person. More than 50% of the mapped AFLP markers were commonly polymorphic for several combinations between japonica and indica rice and 15% were applicable for genetically closer crosses between upland and lowland types of japonica rice. This system can be used for rapid analyses of all kinds of markers.

QTL Mapping for Fiber Quality Traits Based on a Dense Genetic Linkage Map with SSR,TRAP,SRAP and AFLP Markers in Cultivated Tetraploid Cotton

Cotton is one of the most important economic crops in the world,and it provides natural fiber for the textile industry.With the advancement of the textile technology and increased consumption demands on cotton fiber,both cotton yield and quality should be enhanced.However,cotton yield

Intron-Targeted Intron-Exon Splice Conjunction (IT-ISJ) Marker and Its Application in Construction of Upland Cotton Linkage Map

To develop a new DNA maker, which could be used in genetic diversity analysis and genetic map construction in plants, IT-ISJ （intron targeted intron-exon splice junction） primer combinations, which were designed according to the intronexon splice junction conserved sequences, were used to construct cotton genetic linkage map in the present study. 49 out of 704 IT-ISJ primer combinations showed polymorphism between upland cotton high quality cultivar Yumian 1 and multiple dominant gene line T586, and the polymorphic primer combinations accounted for 7.0% of total primer combinations. 49 IT-ISJ primer combinations were used to genotype 270 F2：7 recombinant inbred lines developed from （Yumian 1 × T586） F2, and 58 IT-ISJ loci were obtained. 58 IT-ISJ, together with 150 SSR and 8 morphological loci, were used to conduct linkage analysis, and a linkage map including 22 linkage groups and 113 loci （49 IT-ISJ, 62 SSR, and 2 morphological loci） was constructed. The linkage map covered 714.5 cM with an average interval of 6.3 cM between two markers, accounting for 16.1% of cotton genome. The present study demonstrated that the polymorphism of IT-ISJ marker is high, and it could be effectively applied in plant genetic map construction.

A Microsatellite Genetic Linkage Map of Black Rockfish(Sebastes schlegeli)

Ovoviviparous black rockfish(Sebastes schlegeli) is an important marine fish species for aquaculture and fisheries in China. Genetic information of this species is scarce because of the lack of microsatellite markers. In this study, a large number of microsatellite markers of black rockfish were isolated by constructing microsatellite-enriched libraries. Female- and male-specific genetic linkage maps were constructed using 435 microsatellite markers genotyped in a full-sib family of the fish species. The female linkage map contained 140 microsatellite markers, in which 23 linkage groups had a total genetic length of 1334.1 c M and average inter-marker space of 13.3 c M. The male linkage map contained 156 microsatellite markers, in which 25 linkage groups had a total genetic length of 1359.6 c M and average inter-marker distance of 12.4 c M. The genome coverage of the female and male linkage maps was 68.6% and 69.3%, respectively. The female-to-male ratio of the recombination rate was approximately 1.07:1 in adjacent microsatellite markers. This paper presents the first genetic linkage map of microsatellites in black rockfish. The collection of polymorphic markers and sex-specific linkage maps of black rockfish could be useful for further investigations on parental assignment, population genetics, quantitative trait loci mapping, and marker-assisted selection in related breeding programs.

Constructing Genetic Linkage Maps Using the Whole Genome Sequence of Pacific Bluefin Tuna (Thunnus orientalis) and a Comparison of Chromosome Structure among Teleost Species

Pacific bluefin tuna (Thunnus orientalis) is one of the most economically important species in the Percomorpha group of teleost fishes. Their migrations are extensive and depend upon continuous swimming at a high rate of speed throughout their life. The draft genome sequence of this species has been reported but remains highly fragmented. We constructed a Pacific bluefin tuna genetic linkage map using microsatellite markers developed on each of the scaffolds from the draft genome sequence to link these genome fragments and understand the genomic structure of species in Percomorpha. Of the 606 polymerase chain reaction microsatellite primer pairs tested, 473 were polymorphic in the mapping populations for the linkage analysis. We constructed sex-specific maps for 24 linkage groups consisting of 470 markers, which allowed us to place scaffolds that cumulatively represented 20.8% (153.8 Mb) of the sequenced genome onto the linkage groups. The distribution of orthologous genes on the chromosomes of tuna and four other teleost fish species suggested that the constitution of tuna chromosomes is closest to that of medaka. Both species have the 24 chromosomes of the ancestral teleost, including several chromosomal inversions. The integrated map developed in this study will be useful to construct a complete physical map to conduct comparative teleost genomics and genetic studies on economically useful traits in Pacific bluefin tuna.

Construction of a high-density SSR genetic linkage map and identification of QTL for storage-root yield and dry-matter content in sweetpotato

Sweetpotato(Ipomoea batatas(L.)Lam.)is a widely grown food crop especially in developing countries.Increasing storage-root yield and dry-matter content has been the main breeding objective of the crop,and DNA marker-assisted breeding is needed for this purpose.In this study,using a mapping population of 500 F1 individuals from a cross between Xushu 18(female)and Xu 781(male),we constructed a highdensity genetic linkage map of sweetpotato using 601 simple-sequence repeat(SSR)primer pairs.The Xushu 18 map contained 90 linkage groups with 5547 SSR markers and spanned 18,263.5 cM,and the Xu 781 map contained 90 linkage groups with 4599 SSR markers and spanned 18,043.7 cM,representing the highest genome coverage yet reported for sweetpotato.We identified 33 QTL for storage-root yield and 16 QTL for dry-matter content,explaining respectively 6.5%–47.5%and 3.2%–18.9%of variation.These results provide a foundation for fine-mapping and cloning of QTL and for marker-assisted breeding in sweetpotato.