Liquid Immiscibility of Boninite in Xiangcheng, Southwestern China, and Its implication to Genetic Relationship between Boninite and Komatiitic Basalt

Boninitic rocks and associated high-magnesian basalt and high-iron tholeiite in the Xiangcheng area constitute the basal horizon of the arc volcanic sequence in the Triassic Yidun Island-Arc, southwestern China. The boninite occurs as pillow, massive and ocellar lavas; the last one possesses well-developed globular structure and alternates with the former two. The boninite is characterized by the absence of phenocrysts of olivine and low-Ca pyroxenes and by low CaO/Al2O3 ratios (<0.67) and high Cr (>1000 ppm) and Ni (>250 ppm). The normalized abundance patterns (NAP) of trace elements to primitive mantle are similar to the NAP of low-Ca modern boninites and SHMB in the Archaean and Proterozoic.

Was the Panzhihua Large Fe-Ti Oxide Deposit,SW China,Formed by Silicate Immiscibility?

The Panzhihua mafic intrusion,which hosts a world-class Fe-Ti-V ore deposit,is in the western Emeishan region,SW China.The formation age(~260 Ma),and Sr and Nd isotopes indicate that the Panzhihua intrusion is part of the Emeishan large igneous province and has little crustal contamination.To assess ore genesis of the Panzhihua Fe-Ti-V ore deposit,two different models have been provided to explain the formation,namely silicate immiscibility and normal fractional crystallization.Silicate immiscibility occurring around 1,000℃at the late stage of basaltic magma evolution argues against the silicate immiscibility model.Apatite-hosted melt inclusion research indicates that silicate immiscibility occurred at the late stage of Panzhihua magma evolution,which may not have offered potential to form such large ore deposits as Panzhihua.Alternatively,continuous compositional variations of the Panzhihua intrusion and calculations using thermodynamic modelling software support the hypothesis that the Panzhihua deposit was formed by normal fractional crystallization.Reciprocal trace element patterns of the Panzhihua intrusion and nearby felsic rocks also coincide with the fractional crystallization model.Normal fractional crystallization of high-Ti basaltic magma played a key role in the formation of the Panzhihua Fe-Ti-V ore deposit.

Atomic scale structural analysis of liquid immiscibility in binary silicate melt:A case of SiO2–TiO2 system

Thermodynamic/dynamic modeling of liquid immiscibility in silicates is seriously hindered due to lack of in situ investigation on the structural evolution of the melt.In this work,atomic-scale structural evolution of a classic binary silicate immiscible system,SiO2–TiO2,is tracked by in situ high energy X-ray diffraction(HE-XRD).It is found that both the configuration of[SiO]and the polymerization between them are closely coupled with embedment and extraction of the metallic cations(Ti^4+).[SiO]monomer goes through deficit-oxygen and excess-polymerization before liquid–liquid separation and enables self-healing after liquid–liquid separation,which challenges the traditional cognition that[SiO4]monomer is immutable.Ti4+cations with tetrahedral oxygen-coordination first participate in the network construction before liquid separation.The four-fold Ti–O bond is broken during liquid separation,which may facilitate the movement of Ti4+across the Si–O network to form TiO2-rich nodules.The structural features of nodules were also investigated and they were found highly analogous to that of molten TiO2,which implies a parallel crystallization behavior in the two circumstances.Our results shed light on the structural evolution scenario in liquid immiscibility at atomic scale,which will contribute to constructing a complete thermodynamic/dynamic framework describing the silicate liquid immiscibility systems beyond current models.

Large-Scale Segregation of Immiscible Liquids in the 1780 Ma Taihang Dykes to Produce the Bimodal Xiong'er Volcanics(North China)

It is yet unclear whether large-scale segregation of immiscibile liquids and eruption of high-Si lavas exist in nature(Charlier et al.,2013).We present a possible case of segregation of immscible liquids in the 1780 Ma Taihang

Effect of the liquid temperature on the interaction behavior for single water droplet impacting on the immiscible liquid

The interaction of single water droplet impacting on immiscible liquid surface was focused with the temperature varying from 50℃ to 210℃.The impact behavior is recorded with a high-speed camera running at 2000 frames per second.It is found that droplet diameter,oil temperature,andWeber number have important influences on impact behaviors.Three typical phenomena,including penetration,crater-jet,and crater-jet–secondary jet,were observed.Penetration only occurs when the Weber number is below 105.With Weber number increasing to 302,the jet begins to appear.Moreover,to gain deeper physical insight into the crater formation and jet formation,the energy of droplet impingement onto the liquid pool surface was estimated.The oil temperature has a significant effect on the energy conversion efficiency.High temperature is beneficial to improve energy conversion efficiency.

Modeling of Coalescence and Separation of Liquid Droplets During Solidification of Immiscible Alloys

Directional solidification methods are being used f or in-situ production of metallic immiscible composites. A quantitative understa nding of the dynamic behavior and growth kinetics of the nucleated second phase during solidification is necessary to produce homogeneous dispersion in solidifi ed composites. This paper presents a mathematical model for describing the grow th of nucleated dispersed phase in the two-liquid phase region ahead of the sol idification front and the entrapment of these droplets by the moving solid-liqu id interface in vertical unidirectional solidification systems. The model has t wo components. A macro-heat transfer model for describing the temperature prof iles and the rate of advance of the solidification front. The dynamic behavior and coalescence and growth of nucleated droplets in the two-liquid phase region under the influence of effective gravity and thermocapillary forces were repres ented through the solution the droplet momentum and mass conservation equations in particle space. These two components of the models were coupled through a sp ecial algorithm for tracking the particle location and size with respect to movi ng solidification front in the solidification time scale. The model is used to study the particle size distribution in unidirectional solidified Zn-Bi hypermo notectic alloys at reduced gravity conditions. It has been found that the parti cle size and distribution in the solidified alloy depends on solidification rate and the ratio of effective gravity to thermocapillary forces. It was also foun d that uniform dispersion could only be obtained in a very narrow range of effec tive gravity values near zero gravity. The model predictions were compared agai nst experimental measurements obtained at different effective gravity conditions in a novel unidirectional solidification apparatus that uses electromagnetic fo rces to modulate gravitational forces. The model was found to reasonably predic t the experimentally measured particle size and distribution over the entire ran ge of effective gravity investigated as well as gravity conditions for settling and flotation of the second phase during solidification. The practical signific ance of these findings will be discussed.

The Ore-forming Mechanism of the Jiajika Pegmatite-Type Rare Metal Deposit in Western Sichuan Province:Evidence from Isotope Dating

Granitic pegmatites are commonly thought to form by fractional crystallization or by liquid immiscibility of granitic magma; however, these proposals are based mainly on analyses of fluid and melt inclusions. Here, we use the Jiajika pegmatite deposit, the largest spodumene deposit in Asia, as a case study to investigate ore forming processes using isotope dating. Dating of a single granite sample from the Jiajika deposit using multiple methods gave a zircon U-Pb SHRIMP age of 208.4 ~ 3.9 Ma, an 4~Ar/39Ar age for muscovite of 182.9 ~ 1.7 Ma, and an 4~Ar/39Ar age for biotite of 169.9 ＋ 1.6 Ma. Based on these dating results and the 4~Ar/39Ar age of muscovite from the Jiajika pegmatite, a temperature-time cooling track for the Jiajika granite was constructed using closure temperatures of the different isotope systems. This track indicates that the granite cooled over ^-40 m. y., with segregation of the pegmatite fluid from the granitic magma at a temperature of ~700~C. This result suggests that the Jiajika pegmatite formed not by fractional crystallization, but by segregation of an immiscible liquid from the granitic magma. When compared with fractional crystallization, the relatively early timing of segregation of an immiscible liquid from a granitic magma can prevent the precipitation of ore-forming elements during crystallization, and suggests that liquid immiscibility could be an important ore-forming process for rare metal pegmatities. We also conclude that isotope dating is a method that can potentially be used to determine the dominant ore-forming processes that occurred during the formation of granite-related ore deposits, and suggest that this method can be employed to determine the formation history of the W-Sn ore deposits found elsewhere within the Nanling Metallogenic Belt.

On Magma-Genetic Characteristics of Skarn and Its Formation Mechanism

For skarn type deposits , there are two lands of skarns , skarn formed by filtrating-diffusing metasomatism and vein skarn formed by filling . The vein skarn , discussed this paper and considered to be magmatic genesis , is characterized by: (1) occurring as vein with distinct boundaries with country rocks , yet just the same even in marble easy to be replaced ; (2) composed of a mineral assemblage similar to that of granite ,containing pegmatite as wen as coarse skarn mineral pockets ,and sometimes transited with dike rocks ; (3) dear crystalline feature of deposition ; (4) sideronitic texture ; (5) stowing vesicular, bean-like and flow structures ; (6) very common liquid immiscibility; (7) vertical zoning of gravitational differentiation caused by volatile concentration upwards; (8) associated and transited with non-copper ore bodies of magmatic genesis and tungsten-bearing quartz veins of silicate magmatic genesis rich in volatile ; (9) melt inclusions . Two origins of skam magma . originated by assimilation of silicate magma at its emplacemeot or below it and generated owe to assimilation of deep magma ,corrosion of carbonate strata and liquation , are presented .

Geological settings and metallogenesis of high-grade iron deposits in China

The predominant types of high-grade iron deposits in China include skarn,sedimentary metamorphic(banded ironformation,BIF-type),continental/submarine volcanic-hosted and magmatic Fe-Ti-Voxide deposits.Based on a comprehensive review of current studies on these deposits,this paper suggests that the oxygen concentration in atmosphere played an important role for the formation of BIFs,whereas the tectonic setting and deep magmatic differentiation processes are more important for the other types.Notably,both high temperature and high pressure experiments and melt inclusion studies indicate that during the differentiation,high temperature magmas could develop iron-rich magma via liquid immiscibility but not pure oxide melt("iron ore magma").Fe-P melt could be generated directly by liquid immiscibility under hydrous and oxidized condition.The formation of high-grade iron deposits is mostly associated with the processes related to multiple stages of superimposition,e.g.,desiliconization and iron enrichment,removal of impurity,and remobilization and re-precipitation of iron.According to the temporal evolution,the high-grade iron deposit could be divided into multi-episode superimposition type(temporally discontinuous mineralization)and multi-stage superimposition type(temporally continuous mineralization).The former is represented by the sedimentary metamorphic iron deposit,and the latter includes those related to magmatic-hydrothermal fluids(e.g.,skarn,volcanic-hosted and magmatic types).

When does a diblock copolymer probe the interfacial rheological effect?

Lateral diffusion of diblock copolymer residing on the interfaces between two immiscible liquids is investigated at single molecular level. Fluorescence correlation spectroscopy was used to study the diffusion of fluorescence-labeled diblock copolymer,polystyrene-b-polyisoprene, at the interface formed between two immiscible liquids. The interfaces are formed between N,N-dimethylformamide(DMF) and a few immiscible liquids, n-alkane and polyisoprene. Interfacial diffusion coefficient of the diblock copolymer probe is found to decrease monotonously with the increase of the molecular length of the interface constituting liquids. The decrease of diffusion coefficient follows the prediction by Einstein relation using the viscosity of the constituting liquids as the variables only for interfaces between DMF and very small n-alkanes. For interfaces formed between DMF and bigger alkanes and especially between DMF and polyisoprene, the diffusion coefficient is much higher than the calculated value,indicating that the probe molecule starts to probe the much less viscous interfacial region because the interfacial width gets larger,whose thickness is comparable to the molecule size of the liquids.