MHD Stability Analysis and Flow Controls of Liquid Metal Free Surface Film Flows as Fusion Reactor PFCs

Numerical and experimental investigation results on the magnetohydrodynamics（MHD） film flows along flat and curved bottom surfaces are summarized in this study. A simplified modeling has been developed to study the liquid metal MHD film state, which has been validated by the existing experimental results. Numerical results on how the inlet velocity（V）, the chute width（W） and the inlet film thickness（d0） affect the MHD film flow state are obtained. MHD stability analysis results are also provided in this study. The results show that strong magnetic fields make the stable V decrease several times compared to the case with no magnetic field,especially small radial magnetic fields（Bn） will have a significant impact on the MHD film flow state. Based on the above numerical and MHD stability analysis results flow control methods are proposed for flat and curved MHD film flows. For curved film flow we firstly proposed a new multi-layers MHD film flow system with a solid metal mesh to get the stable MHD film flows along the curved bottom surface. Experiments on flat and curved MHD film flows are also carried out and some firstly observed results are achieved.

Design, Optimization and Control of Extractive Distillation for Separation of Ethyl Acetate-Ethanol-Water Mixture Using Ionic Liquids

In this work, the process simulation of pressure-swing distillation(PSD) and extractive distillation(ED) using ionic liquid(IL) 1-butyl-3-methylimidazolium acetate([bmim][OAc]) as the entrainer for separation of ethyl acetateethanol-water mixture is performed. The design parameters of the two distillation processes are optimized with the minimum total annual cost(TAC) serving as the objective function. The results show that the TAC saving of ED process is 35.27% in comparison with that of PSD process in the case of achieving the same purity and yield of ethyl acetate.In addition, the dynamic controllability of ED process is further studied. The traditional two-point temperature control structure is proposed for the ED process, and it works pretty well while taking into account the disturbances in both feed rate and feed composition.

Optimum geometry of tuned liquid column-gas damper for control of offshore jacket platform vibrations under seismic excitation

In this study, the effectiveness of a tuned liquid column-gas damper, TLCGD, on the.suppression of seismic-induced vibrations of steel jacket platforms is evaluated. TLCGD is an interesting choice in the case of jacket platforms because it is possible to use the structural elements as the horizontal column of the TLCGD. The objective here is to find the optimum geometric parameters, namely orientation and configuration of vertical columns, length ratio, and area ratio of the TLCGD, considering nonlinear damping of the TLCGD and water-structure interaction between the jacket platform and sea water. The effects of different characteristics of ground motion such as PGA and frequency content on the optimum geometry are also investigated and it is observed that these features have some influence on the optimum area ratio. Finally it is observed that pulse arrangement of ground acceleration is one of the most important parameters affecting the efficiency of a TLCGD. In other words, it is found that the TLCGD＇s capability to reduce the RMS responses depends only on the frequency content of the ground acceleration, but its capability to reduce the maximum responses depends on both the frequency content and the pulse arrangement of the ground acceleration.

Experimental analysis on adjusting performance of vapor-liquid two-phase flow controller

The vapor-liquid self-adjusting controller is an innovative automatic regulating valve.In order to ensure adjusted objects run safely and economically,the controller automatically adjusts the liquid flux to keep liquid level at a required level according to physical properties of vapor-liquid two-phase fluid.The adjusting mechanics,the controller’s performance and influencing factors of its stability have been analyzed in this paper.The theoretical analysis and successful applications have demonstrated this controller can keep the liquid level steady with good performance.The actual application in industry has shown that the controller can satisfactorily meet the requirement of industrial production and has wide application areas.

WORKING LIQUID PRESSURE AND ITS CONTROL IN HYDRAULIC DRAWING PROCESSES OF CUPS

A method of setting up a pressure-stroke characteristic of the working liquid in hydraulic drawing is studied. A pressure-stroke characteristic and software for controlling its forming process are also developed. And a set of pressure controlling devices with PLC as a central processor are designed. It can be got from the relevant experiments that the pressure-stroke characteristic is correct and its control for forming process is available.

Torsionally Coupled Response Control of Offshore Platform Structures Using Circular Tuned Liquid Column Dampers

In this paper, the control performance is investigated of Circular Tuned Liquid Column Dampers (CTLCD) over torsional response of offshore platform structures excited by ground motions. Based on the equation of motion for the CTLCD-structure system, the optimal control parameters of CTLCD are given through some derivations on the supposition that the ground motion is a stochastic process. The influence of systematic parameters on the equivalent damping ratio of the structures is analyzed with purely torsional vibration and translational-torsional coupled vibration, respectively. The results show that the Circular Tuned Liquid Column Damper (CTLCD) is an effective torsional response control device.

Application of Neural network PID Controller in Constant Temper-ature and Constant Liquid-level System

Guided by the principle of neural network, an intelligent PID controller based on neural network is devised and applied to control of constant temperature and constant liquidlevel system. The experiment results show that this controller has high accuracy and strong robustness and good characters.

Design and Realization of Liquid Stub Tuner Control System

In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have already adopted liquid stub tuner to replace the conventional stub tuner. It is urgent to develop a control system of the liquid stub tuner. This paper mainly introduces the design and realization of the liquid stub tuner control system , and briefly introduces its three controlling functions: local control, remote control and computer control.

Control performance comparison between tuned liquid damper and tuned liquid column damper using real-time hybrid simulation

Tuned liquid damper (TLD) and tuned liquid column damper (TLCD) are two types of passive control devices that are widely used in structural control. In this study, a real-time hybrid simulation (RTHS) technique is employed to investigate the diff erence in control performance between TLD and TLCD. A series of RTHSs is presented with the premise of the same liquid length, mass ratio, and structural parameters. Herein, TLD and TLCD are physically experimented, and controlled structures are numerically simulated. Then, parametric studies are performed to further evaluate the diff erent performance between TLD and TLCD. Experimental results demonstrate that TLD is more eff ective than TLCD under diff erent amplitude excitations.

Wind-induced vibration control of bridges using liquid column damper

The potential application of tuned liquid column damper (TLCD) for suppressing wind-induced vibration of long span bridges is explored in this paper.By installing the TLCD in the bridge deck,a mathematical model for the bridge-TLCD system is established.The governing equations of the system are developed by considering all three displacement components of the deck in vertical,lateral,and torsional vibrations,in which the interactions between the bridge deck,the TLCD,the aeroelastic forces,and the aerodynamic forces are fully reflected.Both buffeting and flutter analyses are carried out.The buffeting analysis is performed through random vibration approach,and a critical flutter condition is identified from flutter analysis.A numerical example is presented to demonstrate the control effectiveness of the damper and it is shown that the TLCD can be an effective device for suppressing wind-induced vibration of long span bridges,either for reducing the buffeting response or increasing the critical flutter wind velocity of the bridge.

Replacing liquid fyrite with digital to improve <i>in vitro</i>fertilization laboratory quality control procedures

In clinical in vitro fertilization (IVF), optimal culture conditions are required for production of high quality embryos and for achieving high pregnancy rates. Cell culture systems require vigilant attention to quality control and quality assurance, and upgrades to equipment and procedures require strenuous deliberation. During a 2-week maintenance period, we undertook an extensive analysis of incubator carbon dioxide (CO2) monitoring and the effect on culture media pH by comparing our traditional liquid Fyrite instruments to a certified and calibrated digital CO2 analyzer. The digital analyzer produced consistently lower CO2 readings and significantly greater precision than the liquid Fyrite. Media pH measurements showed significant variation depending on CO2 calibration device;however pH remained within manufacturers’ specifications. After superior performance by the digital analyzer, we incorporated this device into the incubator calibration and daily quality control procedures. A retrospective comparison of overall lab performance before and after this equipment switch demonstrated improved clinical pregnancy and implantation rates. This report illustrates the necessary caution when altering established laboratory procedures and equipment while highlighting the benefits of judiciously updating techniques and equipment in a laboratory setting that is often stubborn to change pre-existing, ingrained methodology.

基于单片机的造纸用液位自动化控制系统研究

为切实应对以往造纸用液位控制系统依赖于自动控制机理构建控制电路所造成的液位控制精确度低与自动化程度低等问题,由嵌入式技术重焕液位控制系统活力着手,针对造纸碱回收蒸发工段黑液液位控制需求,基于52单片机和超声波传感器搭建了液位自动化控制系统。系统测试结果表明,以单片机与传感器相结合的液位控制系统精准度高、自动化程度高,且安全稳定性更高,不仅可充分适应当前追求无人化、高效化的造纸工业生产体系,还可普遍推广应用于其他工业领域。

Doping Control Analysis of 16 Non-Steroidal Anti-Inflammatory Drugs in Equine Plasma Using Liquid Chromatography-Tandem Mass Spectrometry

Non-steroidal anti-inflammatory drugs (NSAIDs) are classified as Class 4 agents by the Association of Racing Commissioners International and are banned in racehorses during competition in Pennsylvania (PA). To control the abuse of these agents in racehorses competing in PA, a forensic method for screening and confirmation of the presence of these agents is needed. Equine plasma (0.5 mL) was acidified with 75 μL 1M H3PO4 to increase recovery of the analytes by liquid-liquid extraction using methyl tert-butyl ether (MTBE). Extracted analytes were separated by reversed-phase liquid chromatography using a C8 column under gradient condition. All 16 analytes were detected, quantified and confirmed using a triple quadrupole tandem mass spectrometry with selected reaction monitoring (SRM) in both negative and positive electrospray ionization modes. The limit of detection, quantification and confirmation of the analytes were 1.0 - 5.0 ng/mL, 1.0 - 5.0 ng/mL and 1.0 - 20 ng/mL, respectively. The linear dynamic range of quantification was 5.0 - 200 ng/mL. The method is routinely used in anti-doping analysis to control the abuse of NSAIDs in racehorses competing in PA.

Nonlinear dynamic model and control of three-axis stabilized liquid-filled spacecraft attitude system

The fuel slosh in the storage tanks affects the attitude dynamics of the liquid-filled spacecraft during orbit transferring. To describe the interactions between the fuel slosh dynamics and the spacecraft attitude dynamics, a novel nonlinear dynamic model for three-axis liquid-filled spacecraft is presented, and in this paper, the multi-body dynamics method is utilized. In this model, the fuel slosh is represented by the motions of an equivalent sphere pendulum, and the fuel slosh is underactuated. The proposed dynamics model meets the demand of attitude controller design of liquid-filled spacecraft. Then, a nonlinear proportional-plus-derivative (PD) type controller is designed for the proposed model based on the Lyapunov direct approach. This controller can suppress the fuel slosh and stabilize the attitude of the liquid-filled spacecraft. Numerical simulations are presented to verify the effectiveness of the proposed nonlinear dynamic model and the designed underactuated controller when compared with the conventional control scheme.

油田含聚废液处理及再利用技术研究

近年来虽然对聚合物驱油藏油水井洗井、作业及站内管线清洗产生的含聚废液开展了回收再利用技术研究,但缺乏聚合物胶块废液的有效处理技术。为此,结合注聚区废液的特点,研究相应的处理技术,确定注聚区废液的调剖用配方,并针对不同废液改进调剖注入工艺,形成注聚区废液调剖再利用技术。研究结果表明:研制的橇装式含聚废液地面分离及处理装置能够有效分离废液中的胶块,对其进行粉碎处理后,形成颗粒调剖剂,进而实现单井直接注入;结合含聚废液特点,研发了相应的复配调剖剂配方,形成了调剖剂系列,达到了封堵高渗透油藏堵剂要求;现场实施调剖21口井,累计处理废液51 978 m^(3),油压平均上升了1.5 MPa,累计增油达8 036.2 t。研究结果可为油田清洁环保开发生产提供技术依据。

液体大幅晃动充液航天器分数阶滑模姿态机动控制

研究部分充液航天器存在系统参数不确定、外部未知扰动、液体燃料大幅晃动的姿态机动控制问题。首先,将大幅晃动的液体燃料等效为运动脉动球模型,建立刚-液耦合航天器动力学方程;其次,针对充液航天器姿态稳定问题,提出一种具有固定时间收敛的分数阶非奇异快速终端滑模算法;同时,设计扰动观测器来估计系统的综合扰动,并且利用径向基函数神经网络来估计液体大幅晃动引起的扰动;设计Lyapunov函数分析并证明系统固定时间稳定性;最后,通过对比的仿真结果验证本文提出控制策略的可行性和有效性。

纳米材料中的界面现象

在课程教学中融入科学前沿实例不仅可以阐明所学基本原理的实际意义,还可以为基本原理的灵活应用提供范例,启发学生独立思考能力。界面化学是物理化学课程中的重要学习内容,但由于在常规尺度的多相体系中界面现象并不显著,学生对该部分知识常有忽视。近年来纳米材料已成为国内外研究的热点。纳米材料由于其高界面分子比例而表现出更为显著的界面现象。将界面化学的基本原理应用于纳米材料的研究中,已取得了一系列令人瞩目的成果。本文首先对附加压力、接触角等相关界面现象的基本原理进行梳理,然后分别介绍根据这些基本原理所发展出的分子马达、光控微流控器件、液体门控技术以及超疏水表面四项科技突破。

HPLC Profiling for Quality Control of Secondary Metabolites of Aqueous and Hydroethanolic Extract of Gardenia aqualla Stapf &Hutch

WHO strategy on traditional medicine is based on security and quality of phytomedicine. Commonly adulterated affecting mostly metabolic and sexual dysfunction drugs. Control quality of those phytomedicines requires development of strategy and techniques applicable to them. Among the techniques, Reverse Phase Liquid Chromatography is the most used and has been developed in these studies to assess a protocol to characterize Gardenia aqualla leaves extract. The method consists in determining chromatographic conditions using organic and pH gradient models based on water and acetonitrile combined with pH modifiers made up of formic acid (AF) and ammonium hydroxide (NH3). Results show that extracts contain mainly acidic compounds quickly eluted by NH3 and more retained by AF. Optimal pH range for separation is 3 - 7 corresponding to 1.59 mM of NH3 and 6.55 mM of AF. In these conditions, elution of many polar compounds could be effective using a C18 based-deactivated column in a short period of time.

光学舱推进剂补加过程的热分析仿真与试验研究

推进剂补加是确保光学舱在轨长寿命工作的重要功能,补加过程面临的热环境条件比以往任务恶劣,全过程热控制十分必要。针对光学舱推进剂补加过程的复杂传热新问题,建立包含压气机、液冷模块和环路热管等部件的光学舱平台集成热数学模型,进行热分析仿真研究,并开展系统级热试验。对比高温和低温2种补加条件的瞬态热分析和热试验结果,研究传热关系和温度变化规律;针对热试验中垂直热管因重力因素从不运行至运行的瞬态过程,提出一种变热导率仿真方法;提出高温补加优化设计方案并进行在轨预示。结果表明:瞬态仿真结果与试验结果吻合良好,验证了热分析方法和仿真模型的准确性和有效性;在轨补加采用压气机本体预热并启动2套环路热管,压气机的最高温度≤34.1℃,预热总功耗50 Wh,满足指标要求。研究结果对于光学舱停靠空间站期间的推进剂补加流程设计具有一定参考价值。

Branch Quality Control of Gas-Liquid Two-Phase Flow Using a Novel T-Junction Type Distributor

In order to eliminate mal-distribution and ensure the side arm to produce desirable gas quality a special distributor is proposed. The experimental distributor mainly consists of a straight through section,a gas extraction line,a liquid extraction line and a side arm branch. A gas orifice and a liquid orifice are mounted at the gas and liquid extraction line respectively to control the outlet gas quality. The diameter of the liquid orifice was set to 2. 50 mm and three gas orifices with different size( dG= 2. 65,5. 00,10. 00 mm) were tested. The experiments were carried out at an air-water two-phase flow loop. The gas superficial velocity ranged from 6. 0 to 20. 0 m /s and the liquid superficial velocity was in the range of 0. 02- 0. 18 m /s. Flow patterns such as wave flow,slug flow and annular flow were observed. The gas quality of the side arm branch was found mainly determined by the flow area ratio of the gas orifice to the liquid orifice and independent of gas and liquid superficial velocity,flow patterns and extraction flux.