Electrically tunable holographic polymer templated blue phase liquid crystal grating

In this paper, we demonstrate an alternative approach to fabricating an electrically tunable holographic polymer tem- plated blue phase liquid crystal grating. This grating is obtained by preforming a polymer template comprised of periodic fringes, and then refilling it with a blue phase liquid crystal. Compared with conventional holographic polymer dispersed liquid crystal gratings, our grating can remarkably reduce its switching voltage from 200 V to 43 V while maintaining a sub-millisecond response time. The holographic polymer templated blue phase liquid crystal （HPTBPLC） grating is free from electrode patterning, thus leading to a lower cost and more flexible applications.

Kinetics investigations for holographic Bragg grating based on polymer dispersed liquid crystal

This paper investigates the monomer kinetics of polymer dispersed liquid crystal （PDLC） grating. Fourier transform infrared （FTIR） spectra are used in the studies of photoreaction kinetics. The results indicate that there is a relative stable stage arises after a very short initial stage. Based on FTIR studies, the monomer diffusion equation is deduced and necessary numerical simulations are carried out to analyse the monomer conversion which is an important point to improve phase separation structure of PDLC grating. Some simulation results have a good agreement with experimental data. In addition, the effects induced by monomer diffusion constant D and diffusion-polymerization-ratio rate R are discussed. Results show that monomer conversion can be improved by increasing value of D. Besides, a good equilibrium state （R = 1） is more beneficial to the diffusion of monomer which is important in the process of phase separation.

Electro-optical properties cholesteric liquid of polymer stabilized crystal film＊

Liquid crystals （LCs） and polymers are extensively used in various electro-optical applications. In this paper, normal mode polymer stabilized cholesteric LC film is prepared and studied. The effects of chiral dopant and monomer concentrations on the electro-optical properties, such as contrast ratio, driving voltage, hysteresis width and response time, are investigated. The reasons of electro-optical properties influenced by the concentrations of the materials are discussed. Through the proper material recipe, the electro-optical properties of polymer stabilized cholesteric LC film can be optimized.

"LIVING" FREE RADICAL SYNTHESIS OF NOVEL RODCOIL DIBLOCK COPOLYMERS WITH POLYSTYRENE AND MESOGEN-JACKETED LIQUID CRYSTAL POLYMER SEGMENTS

The synthesis of rod-coil diblock copolymers was achieved for the first time by TEMPO-mediated 'living' free radical polymerization of styrene and 2,5-bis [(4-methoxyphenyl)oxycarbonyl] styrene(MPCS). The block architecture of the two diblock copolymers thus prepared, MPCS-b-St(5400/2400) and MPCS-b-St(10800/8700), was confirmed by GPC, DSC studies and the formation of multimolecular micelles. (Author abstract) 10 Refs.

DESIGN AND STUDY OF NEW AZOBENZENE LIQUID CRYSTAL/POLYMER MATERIALS

Discussion is presented on the use of the photoisomerization of azobenzene chromophore in the design andpreparation of novel functional materials. The two systems reviewed are azobenzene polymer-stabilized liquid crystals andazobenzene elastomers. In the first case, a polymer network containing azobenzene moieties is used to optically induce andstabilize a long-range liquid crystal orientation without the need of treating the surfaces of the substrates. This optical andrubbing-free approach was applied to nematic and ferroelectric liquid crystals. In the second case, an azobenzene side-chainliquid crystalline polymer is grafted onto a styrene-butadiene-styrene triblock copolymer to yield a photoactive thermoplasticelastomer. Coupled mechanical and optical effects make possible the formation of dimaction gratings that may be useful formechanically tunable optical devices.

STUDY ON LIQUID CRYSTAL POLYMERS WITH TWO-DIMENSIONAL MESOGENIC UNITS

A series of liquid crystalline polymers with two-dimensional mesogenic units were synthesized by solution polycondensation at low temperature. All the polymers were liquid crystalline. The melting temperature T;（except that with substituent of methoxy） and the clearing temperature T;of the polymers change regularly with varying of the length of the alkyl substituent groups.

Semi-interpenetrating-network all-solid-state polymer electrolyte with liquid crystal constructing efficient ion transport channels for flexible solid lithium-metal batteries

The development of the solid-state polymer electrolytes (SPEs) for Li-ion batteries (LIBs) can effectively address the hidden safety issues of commercially used liquid electrolytes.Nevertheless,the unsatisfactory room temperature ion conductivity and inferior mechanical strength for linear PEO-based SPEs are still the immense obstacles impeding the further applications of SPEs for large-scale commercialization.Herein,we fabricate a series of semi-interpenetrating-network (semi-IPN) polymer electrolytes based on a novel liquid crystal (C6M LC) and poly(ethylene glycol) diglycidyl ether (PEGDE) via UV-irradiation at the first time.The LCs not only highly improve the mechanical properties of electrolyte membranes via the construction of network structure with PEGDE,but also create stable ion transport channels for ion conduction.As a result,a free-standing flexible SPE shows outstanding ionic conductivity(5.93×10^(-5) S cm^(-1) at 30℃),a very wide electrochemical stability window of 5.5 V,and excellent thermal stability at thermal decomposition temperatures above 360℃ as well as the capacity of suppressing lithium dendrite growth.Moreover,the LiFePO_(4)/Li battery assembled with the semi-IPN electrolyte membranes exhibits good cycle performance and admirable reversible specific capacity.This work highlights the obvious advantages of LCs applied to the electrolyte for the advanced solid lithium battery.

SYNTHESIS OF A NOVEL "MESOGEN-JACKETED LIQUID CRYSTAL POLYMER" BASED ON VINYLTEREPHTHALIC ACID

Poly{2,5-bis[(p-methoxyphenyl)oxycarbonyl]styrene}was successfully synthesized.This new polymer has a structure characteristic of mesogen-jacketed liquid cyrstalline polymers(MJLCPs)and does form a liquid crystal phase above its glass transition.It thus became the starting member of a new series of MJLCPs.The synthesis of the polymer as well as the liquid crystalline properties of the polymer and its monomer was discussed.A brief comparison of the new monomer and polymer with some previously reported counterparts was also included.

Effect of BaTiO₃Nanoparticle on Electro-Optical Properties of Polymer Dispersed Liquid Crystal Displays

Ferro nematic suspensions are the prominent materials to enhance the electro optical performance of liquid crystal displays. Electro optical properties of polymer dispersed liquid crystal (PDLC) display with the introduction of Barium Titanate nanoparticles have been investigated in this article and it is shown that there is a considerable enhancement in electro-optical response of the displays. The nanoparticles lower the switch-on electric field and thereby increase the optical transmission at certain voltages of the displays. The electro-optical characteristics of the PDLC cells were investigated with a He-Ne laser followed by MatLab calculations.

LIQUID CRYSTAL POLYMERS WITH TWO-DIMENSIONAL MESOGENIC UNITS

A series of 'liquid crystal polymers with two-dimensional mesogeuic units' were synthesized by the polycondensations of the monomer 2, 5-dihydroxybenzylidene-4-phenetidine with a diacid chloride selected from a series of α, ω-bis(4-chloroformylphenyloxy)carbonylalkues. This is the first series of polymers reported under the newly proposed concept 'liquid crystal polymers with two dimensional mesogenic units'.

DIPOLE POLARIZATION RELAXATION AND MOLECULAR STRUCTURE OF MAIN-AND SIDE-CHAIN LIQUID-CRYSTALLINE POLYMERS

Molecular mobility in thermotropic polyesters and side-chain polymers with different struc-ture of mesogens and spacers has been studied by dielectrical method in dilutesolutions. The results made it possible to establish the multiplicity of dielectric relaxationtransitions which reflects the small- and large-scale types of molecular motion. It was shownthat dielectric relaxation processes occurring in accordance with local mechanism (relaxationtimes 10^(-9)--10^(-7)s. and the activation energy 10--50kJ/mol) are due to the mobility of kineticchain elements of different length within a monomer units. It was found that the dielectricrelaxation process connected with a large-scale form of molecular motion (relaxation times10^(-5)--10^(-6)s. and the activation energy 100kJ/mol) did not depend on the molecular massbut was infiuenced by factors changing the conformational state of the macromolecule. It isestablished tha the cooperative reorientation mobility of associated mesogenic fragments isthe source of the large-scale process.

NITROXIDE-MEDIATED FREE RADICAL SYNTHESIS OF MESOGEN-JACKETED LIQUID CRYSTAL POLYMERS

The first TEMPO-mediated 'living' free radical polymerization of liquid crystalline monomer, 2, 5-bis[(4-methoxyphenyl)oxycarbonyl]styrene (MPCS), was carried out at 130 degrees C with BPO as an initiator. The molecular weight of the polymer can be varied from rather low values to high values while maintaining narrow polydispersity. It was observed that the polymerization of MPCS proceeded much faster than that of styrene. A tentative explanation for this fast polymerization was suggested.

SYNTHESIS AND CHARACTERIZATION OF LIQUID CRYSTAL POLYMERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNITS (Ⅱ)

A series of liquid crystalline polymers with T-shaped two-dimensional mesogenic unitswere synthesized via low temperature solution polycondensation of 2-(4'-alkoxy-phenyl)hydroquinone with various diacyl dichlorides. The polymers were found to be nematic andshown thermotropic liquid crystalline behaviors through observations using DSC, polarizedmicroscopy and X-ray diffraction. The melting temperature T_m and the isotropizationtemperature T_i of the polymers change regularly with varying of the monomer structures.

Cinnamate-functionalized hyperbranched polymer as liquid crystal photo-alignment layer

In this work, 4-methoxylcinnamoyl chloride was reacted with a commercial hyperbranched polymer （Boltom-TM H30） to prepare a hyperbranched photosensitive polymer （H30-Ci）. The polymer was characterized by UV absorption spectrum and 1H- NMR spectrum. After processed by Linearly Polarized Polymerization （LPP） method, the spin-coated films of H30-Ci were used as photo-alignment layers to assemble liquid crystal （LC） cells containing nematic liquid crystal （5CB）. The observation by polarized microscope showed that the H30-Ci blended with a linear polymer （BP-AN-Ci） photo-alignment layers could align LC molecules in a very uniform way.

PREPARATION OF POLYMER DISPERSED LIQUID CRYSTALS USING PHOTOPOLYMERIZATION

2-Hydroxyethyl methacrylate (HEMA) and styrene copolymers are prepared by photopolymerization. The electrooptical behavior and microstructure of the polymer dispersed liquid crystal films are investigated by using He-Ne laser and scanning electron microscopy, respectively. With increasing E7 content in the copolymer, droplet size increased, threshold voltage decreased.

SYNTHESIS AND CHARACTERIZATION OF LIQUID CRYSTAL POLYMERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNITS

Two series of new liquid crystalline polymers with T-shaped two-dimensional mesogenic units were synthesized by low temperature solution polycondensations of 4-substituted N-2, 5-dihydroxybenzylidene aniline monomers with different diacyl dichlorides. The polymers were found to be nematic and shown liquid crystalline behavior. The melting temperature T-m and the clearing temperature T-i of the polymers change regularly with varying of the monomer structures.

Fabrication and Characterization of Bulk Heterojunction Solar Cells Based on Liquid-Crystal Semiconductive Polymer

Bulk heterojunction solar cells based on poly poly(9,9-dioctylfluorene-co-bithiophene) (F8T2) as liquid crystal semiconductive polymer and C60 as electron acceptor were fabricated and characterized. Thermal treatment of the bulk heterojunction films at annealing in the range of glass temperature and liquid crystal transition was performed for tuning optimization with improving the photovoltaic and optical properties. The photovoltaic performance was depended on morphological behavior in active layer at crystal state below glass temperature. The F8T2 thin film worked for electron-donor layer as p-type semiconductor to support charge transfer in active layer. Mechanisms of the photovoltaic properties were discussed on the basis of experimental results.

Effect of Polymer Network Morphology on the Performance of Polymer Dispersed Liquid Crystal (PDLC) Composite Films

The effects of the morphologies of liquid crystal (LC) droplets left in polymer network on the performance of polymer dispersed liquid crystal composite films were investigated.By adjusting the relative content range of the crosslinking and diluents,the morphologies of polymer network can be changed.Therefore,the properties of PDLC composite films with imparity polymer morphologies were obtained by experiments and the finite element simulation.Results of the experimental and finite element simulation showed that the electro-optical properties of PDLC composite films were inversely proportional to the domain size of the polymer network and the mechanical properties were proportional to the domain size of the polymer network.

Electrochemical Polymerization of 4,4-Dimethyl-2,2’-Bithiophene in Concentrated Polymer Liquid Crystal Solution

Electrochemical polymerization of 4,4’-dimethyl-2,2’-bithiophene (4DMBT) was carried out in a concentrated solution of hydroxypropyl cellulose (HPC) liquid crystal in N,N-dimethylformamide. Infrared absorption spectra suggested that the resultant polymer film contains HPC. This study demonstrates an electrochemical preparation of a polymer composite having liquid crystal order. We proposed a helical stacking composite model.