Influence of heating and water-exposure on the liquid limits of GMZ01 and MX80 bentonites

Bentonite has been considered as a buffer material for embedding canisters with high-level radioactive waste（HLW） in deep geological repositories.GMZ bentonite deposit,located in Xinghe County,Inner Mongolia Autonomous Region,China was proposed as a buffer/backfill material for HLW repository in China.The liquid limits of natural Na-bentonite GMZ01 and commercial Na-bentonite MX80,which are previously heated at 80 ℃ and 95 ℃,respectively,and exposed to water for different times are measured.It is observed that the liquid limit of GMZ01 increases slightly at the beginning,and then decreases as the heating time increases,while the liquid limit of MX80 decreases with the heating time.The liquid limits of both GMZ01 and MX80 decrease with increasing water-exposure time.After the samples are heated at 80℃and 95 ℃ for several months,the mineralogical composition of GMZ01 does not exhibit evident change,whereas MX80 experiences some changes.In addition,the chemical composition,cation exchange capacity（CEC） and exchangeable cation of all the samples do not change significantly.

Study on the formation of arc plasma on the resistive wall liquid metal current limiter

Due to its significant attributes,the liquid metal current limiter(LMCL)is considered a new strategy for limiting short-circuit current in the power grid.A resistive wall liquid metal current limiter(RWLMCL)is designed to advance the starting current-limiting time.Experiments are performed to investigate the dynamic behaviors of liquid metal,and the influence of different currents on the liquid metal self-shrinkage effect is compared and analyzed.Furthermore,the liquid metal self-shrinkage effect is mathematically modeled,and the reason for the formation of arc plasma is obtained by simulation.The laws of arc plasma formation and the current transfer in the cavity are revealed,and the motion mechanisms are explained by physical principles.The simulations are in accordance with the test data.It is demonstrated that the sudden change of the current density at both ends of the wall causes the liquid metal to shrink and depress under the electromagnetic force,and the current starts to transfer from the liquid metal path to the wall resistance path.The RWLMCL can effectively advance the starting current-limiting time.

Investigation on the Arc Ignition Characteristics and Energy Absorption of Liquid Metal Current Limiter Based on Self-Pinch Effect

The GaInSn liquid metal current limiter based on the fluid pinch effect has broad application prospects due to its particular properties. However, the limited rated current and abil- ity of power dissipation are the critical problems for its wide application. Firstly, the temperature distribution of the liquid metal current limiter （LMCL） was obtained by experiments with a rated current of 1 kA and the arc ignition phenomenon was observed with 1.5 kA, which indicates that the rated current is mainly limited by the arc rather than the high temperature compared to the traditional switchgears. Furthermore, an improved method is proposed by adding the paralleled pure resistance, impedance or another LMCL element to protect the setup from the fault energy concentration in the setup. The problem of a slower arc voltage increasing rate can be solved by adding a paralleled impedance with suitable parameters. Finally, the current limiting properties based on the improved method were investigated and the alternating oscillating current was found between two paralleled LMCL elements owing to their deviation of arc ignition in reality.

A statistical reappraisal of the relationship between liquid limit and specific surface area, cation exchange capacity and activity of clays

More than 500 datasets from the literature have been used to evaluate the relationships of specific surface area (SSA),cation exchange capacity (CEC) and activity versus the liquid limit (LL).The correlations gave R^2 values ranging between 0.71 and 0.92.Independent data were also used to validate the correlations.Estimated SSA values slightly overestimate the measured SSA up to 100 m^2/g.Regarding the estimated CEC values,they overestimated the measured CEC values up to 20 meq/(100 g).A probabilistic approach was performed for the correlations of SSA,CEC and activity versus LL.The analysis shows that the relations of SSA,CEC and activity with LL are robust.Using the LL values,it is possible to assess other basic engineering properties of clays.

Evidence of vapor shielding effect on heat flux loaded on flowing liquid lithium limiter in EAST

A lithium(Li)vapour layer was formed around a flowing liquid Li limiter to shield against the plasma incident power and reduce limiter heat flux in the EAST tokamak.The results revealed that after a plasma operation of a few seconds,the layer became clear,which indicated a strong Li emission with a decrease in the limiter surface temperature.This emission resulted in a dense vapour around the limiter,and Li ions moved along the magnetic fleld to form a green shielding layer on the limiter.The plasma heat flux loaded on the limiter,measured by the probe installed on the limiter,was approximately 52%lower than that detected by a fast-reciprocating probe at the same radial position without the limiter in EAST.Additionally,approximately 42%of the parallel heat flux was dissipated directly with the enhanced Li radiation in the discharge with the liquid metal infused trenches(LIMIT)limiter.This observation revealed that the Li vapour layer exhibited an excellent shielding effect to liquid Li on plasma heat flux,which is a possible beneflt of liquid-plasma-facing components in future fusion devices.

A novel fault current limiter topology design based on liquid metal current limiter

The liquid metal current limiter(LMCL)is regarded as a viable solution for reducing the fault current in a power grid.But demonstrating the liquid metal arc plasma self-pinching process of the resistive wall,and reducing the erosion of the LMCL are challenging,not only theoretically,but also practically.In this work,a novel LMCL is designed with a resistive wall that can be connected to the current-limiting circuit inside the cavity.Specifically,a novel fault current limiter(FCL)topology is put forward where the novel LMCL is combined with a fast switch and current-limiting reactor.Further,the liquid metal self-pinch effect is modeled mathematically in three dimensions,and the gas-liquid two-phase dynamic diagrams under different short-circuit currents are obtained by simulation.The simulation results indicate that with the increase of current,the time for the liquid metal-free surface to begin depressing is reduced,and the position of the depression also changes.Different kinds of bubbles formed by the depressions gradually extend,squeeze,and break.With the increase of current,the liquid metal takes less time to break,but breaks still occur at the edge of the channel,forming arc plasma.Finally,relevant experiments are conducted for the novel FCL topology.The arcing process and current transfer process are analyzed in particular.Comparisons of the peak arc voltage,arcing time,current limiting efficiency,and electrode erosion are presented.The results demonstrate that the arc voltage of the novel FCL topology is reduced by more than 4.5times and the arcing time is reduced by more than 12%.The erosions of the liquid metal and electrodes are reduced.Moreover,the current limiting efficiency of the novel FCL topology is improved by 1%–5%.This work lays a foundation for the topology and optimal design of the LMCL.

California Bearing Ratio for Cohesive Soils from Quasi Static Cone Tests

The California bearing ratio (CBR) test is the most widely spread method of determining the bearing strength of the pavement material and is fundamental to pavement design practice in most countries. This test is expensive, laborious and time consuming, and to overcome this, Quasi static cone penetrometer machine was fabricated and used to measure the consistency limits (liquid limit-LL, Plastic limit-PL and Plasticity index-PI), which were used to develop an empirical equation to determine CBR. Soil samples were collected and unsoaked CBR, PL, LL and PI were determined according to BS 1377 part 9 and BS 1377-2;1990. Quasi static penetration forces at 20 mm depth of penetration were also determined at consistency limits. It was found that the force of 1020 gf and 60 gf was achieved at a depth of 20 mm at PI and LL respectively. The correlation and regression analysis between consistency limits, and the experimental CBR obtained showed coefficient of determination, R2 = 0.907 between CBR and all the parameters using multiple linear regression analysis (MLRA). The regression equation developed was used together with the relationship developed between the Quasi static Penetration force at consistency limits and the tested consistency limits to come up with the General Empirical Equation. Verification of the formula showed that the correlation can be used accurately to determine the un soaked CBR.

Effect of Sample Disturbance on Unconfined Compression Strength of Natural Marine Clays

Quantitatively correcting the unconfined compressive strength for sample disturbance is an important research project in the practice of ocean engineering and geotechnical engineering. In this study, the specimens of undisturbed natural marine clay obtained from the same depth at the same site were deliberately disturbed to different levels. Then, the specimens with different extents of sample disturbance were trimmed for both oedometer tests and unconfined compression tests. The degree of sample disturbance SD is obtained from the oedometer test data. The relationship between the unconfined compressive strength q u and SD is studied for investigating the effect of sample disturbance on q u. It is found that the value of q u decreases linearly with the increase in SD. Then, a simple method of correcting q u for sample disturbance is proposed. Its validity is also verified through analysis of the existing published data.

Remolded Undrained Strength of Soils

Extensive data of undrained shear strength for various remolded soils are compiled to normalize the remolded undrained strength. Remolded soils have a wide spectrum of liquid limits ranging from 25% to 412%. It is found that the remolded undrained strength is a function of water content and liquid limit. Furthermore, a simple index designated as normalized water content w * is introduced for normalizing remolded undrained strength for various soils. The normalized water content w * is the ratio of water content to liquid limit. The relationship between the remolded undrained strength and the normalized water content can be expressed by a simple equation. The new simple equation is not only valuable theoretically for helping in assessing the in situ mechanical behavior, but also useful to ocean engineering practice.

On Physical and Mechanical Behavior of Natural Marine Intermediate Deposits

Coastal structures may be built on natural sedimentary intermediate grounds, which mainly consist of silty soils and fine sandy soils. In this study, extensive field and laboratory tests were performed on the natural marine intermediate deposits to demonstrate the difference in behavior between natural marine clayey soils and natural marine intermediate deposits. The natural intermediate deposits have almost the same ratios of natural water content to liquid limit as those of the soft natural marine clays, but the former have much higher in-situ strength and sensitivity than the latter. The research results indicate that grain size distributions of soils affect significantly tip resistance obtained in field cone penetration tests. The mechanical parameters of natural marine intermediate deposits are also significantly affected by sample disturbance due to their high sensitivity and relatively large permeability. Unconfined compression shear tests largely underestimate the strength of natural marine intermediate soils. The triaxial consolidated compression shear tests with simulated in-situ confined pressure give results much better than those of uncomfined compression shear tests.

Critical State Sedimentation Line of Soft Marine Clays

The compression behavior responsible for unity sensitivity is very valuable in quantitative assessment of the effects of soil structure on the compression behavior of soft marine sediments. However, the quantitative assessment of such effects is not possible because of unavailability of the formula for the compression curve of marine sediments responsible for unit sensitivity. In this study, the relationship between the remolded state and the conventional critical state line is presented in the deviator stress versus mean effective stress plot. The analysis indicates that the remolded state is on the conventional critical state line obtained at a relatively small strain. Thus, a unique critical state sedimentation line for marine sediments of unit sensitivity is proposed. The comparison between the critical state sedimentation line proposed in this study and the existing normalized consolidation curves obtained from conventional oedometer tests on remolded soils or reconstituted soils explains well the

Comparison of properties of traditional and accelerated carbonated solidified/stabilized contaminated soils

The investigation of the long-term performance of solidified/stabilized （S/S） contaminated soils was carried out in a trial site in southeast UK. The soils were exposed to the maximum natural weathering for four years and sampled at various depths in a controlled manner. The chemical properties （e.g., degree of carbonation （DOC）, pH, electrical conductivity （EC）） and physical properties （e.g., moisture content （MC）, liquid limit CLL）, plastic limit （PL）, plasticity index （PI）） of the samples untreated and treated with the traditional and accelerated carbonated S/S processes were analyzed. Their variations on the depths of the soils were also studied. The result showed that the broad geotechnical properties of the soils, manifested in their PIs, were related to the concentration of the water soluble ions and in particular the free calcium ions. The samples treated with the accelerated carbonation technology （ACT）, and the untreated samples contained limited number of free calcium ions in solutions and consequently interacted with waters in a similar way. Compared with the traditional cement-based S/S technology, e.g., treatment with ordinary portland cement （OPC） or EnvirOceM, ACT caused the increase of the PI of the treated soil and made it more stable during long-term weathering. The PI values for the four soils ascended according to the order： the EnvirOceM soil, the OPC soil, the ACT soil, and the untreated soil while their pH and EC values descended according to the same order.

Geotechnical Identification and Classification of Soils as Flexible Pavement Subgrade of the Section Fongo Tongo-Melong

The present study is inscribed within the framework of the geotechnical characterization of the soils of the Santchou plain, their classification for employment as pavement subgrade, various identification tests were carried out on the samples. The results obtained showed that with a wide range of different grain sizes, the studied soils showed low content in clay grains and dominance of either sand grains or silt grains, this can be explaining how most of these soil are poorly graded. According to the USDA textural classification, the grain size distribution of these soils makes them to be classified as Silty Loam types to Sandy Loam types. Despite of their organic matter content which is less than 10%, according to their respective methylene blue values, the soils studied along the section should be mainly loamy soil of medium plasticity to clayed soil, therefore showing a sensibility of its behavior to variation of water content. That last one is confirmed by the consistency parameters of these soils which show intermediate plasticity to highly plastic. Also, the bearing capacity proposed by these soils at their respective optimum dry densities is relatively small, although most of these experimental CBR values of the studied soils are more important than the ones prescribed by the AASHTO Classification system for A5, A6, and A7 types, and the French Highway Earthworks Manual Classifications system (GTR) for the corresponding A2 and A3 types.

Mineralogical and Geochemical Assessment of Clay Properties of Edda, Afikpo Sub Basin Nigeria for Possible Use in the Ceramics Industry

Clay samples from selected part of Edda were analyzed to identify the clay mineral types present,their chemical and physical properties with a view to appraising their industrial suitability as ceramic materials.The mineralogical and geochemical analyses were done using the principles of X-Ray diffraction and X-ray fluorescence respectively.A total of seven clay samples were used for the study,other tests such as plasticity,bulk density,shrinkage,loss on ignition(LOI)and water absorption capacity was carried out to determine the amount of water absorbed under specified conditions.The basic industrial properties assessment showed that more than 70%of the clays are fine-grained.The clays exhibited low to moderate plasticity,moderate shrinkage and bulk density,low to moderate values of both loss on ignition and water absorption capacity.The clays are buff to yellowish in colour.The results of x-ray fluorescence revealed that the mean concentration of major oxide in the clays is shown as follows:SiO_(2)(62.78%),Al_(2)O_(3)(20.25%),total Fe(6.09%),CaO(0.56%),MgO(3.21%),Na_(2)O(0.47%),K_(2)O,(1.44%)and TiO_(2)(0.52%).The samples have high silica content,low alumina and low oxide content.The results of x-ray diffraction revealed that kaolinite is the dominant clay mineral with illite and montmorillonite occurring in subordinate amounts,while quartz and feldspar are the non-clay components present.The characteristics of the clays for each parameter were compared with industrial standards.These properties are appropriate for the Afikpo clays to be useful in the manufacturing of ceramics.However,since the silica content of the clays is high further beneficiation is recommended.

Identification of Empirical Models for the Prediction of the Plasticity Index:Case of the KhôDepression in South Benin

The plasticity index is an essential design parameter used as a standard input in fine-grained soil investigation programs.It is used to estimate the plasticity and physical properties of soils,and indirectly their strength properties.This index is determined from the Atterberg limit tests,starting from the limits of liquidity and plasticity.However,the realization of the test considered as basic and simple,is not so much.The effects of the operator,the calibration of the apparatus and the environmental aspects during the tests affect the reliability and accuracy of the results.In this paper,the objective is to overcome these difficulties by evaluating the plasticity index of clay and loam soils by considering only the values of the liquid limit.Soil samples were collected from 0 to 5 m depth in the localities of the Khôdepression in Benin.On these samples,Atterberg limit tests were performed in the laboratory.Using MATLAB’s Curve Fitting Toolbox,linear,exponential and power prediction models were analyzed.The results showed that there is indeed a good correlation between the plasticity index and the liquid limit of the soils.For the linear model,it was observed R2 equal to 0.9891.For the exponential model,R2 is 0.98871 and for the power model 0.9802.A study of the residual plot validated the models found,as well as comparisons with well-known literature sources.Through the equations obtained,it is now possible to study the plasticity of soils in the Khôdepression only from the liquid limit,without determining the plasticity limit.