The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the v...The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the viscosity and temperature of hypoeutectic Al-5%Si and eutectic Al- 12.5%Si alloy melts is approximately exponential except for some special zones, but that of the hypereutectic melt is different. The paper discussed the correlation of the viscosity and atomic density, which is thought that the viscosity corresponds to the atomic density to some extent.展开更多
Based on the theory of micro-inhomogeneity of liquid metal,a calculation model is established for the quantitative description of the structural information of metal melts.Only by thermophysical property parameters an...Based on the theory of micro-inhomogeneity of liquid metal,a calculation model is established for the quantitative description of the structural information of metal melts.Only by thermophysical property parameters and basic structural parameters of solid metal,can this model produce the main information of melt structure,including the relative concentration of active atoms,size of atomic clusters and number of short-range order atoms.Based on this model,the main structural information of Al and Ni melts in the not high range above the liquidus is calculated,with results in good agreement with experimental values.Besides,analyzed is the influence of superheating temperature and atomic number on the melt structural information of the first (IA) and second main group (IIA) elements.With temperature increasing,melt structural information regularly changes for both IA and IIA elements.With the atomic number increasing,melt structural information of IA elements changes regularly,for the crystal structures of the IA elements are all of bcc lattice type.However,no notable regular change of melt structural information for IIA elements has been found,mainly because the lattice type of IIA elements is of hcp-fcc-bcc transition.The present work presents an effective way for better understanding metal melt structure and for forecasting the change of the physical property of metal melts.展开更多
The current highly integrated electronics and energy systems are raising a growing demand for more sophisticated thermal management in harsh environments such as in space or some other cryogenic environment. Recently,...The current highly integrated electronics and energy systems are raising a growing demand for more sophisticated thermal management in harsh environments such as in space or some other cryogenic environment. Recently, it was found that room temperature liquid metals （RTLM） such as gallium or its alloys could significantly reduce the electronics temperature compared with the conventional coolant, like water, oil or more organic fluid. However, most of the works were focused on RTLM which may subject to freeze under low temperature. So far, a systematic interpretation on the preparation and thermal properties of liquid metals under low temperature （here defined as lower than O^C） has not yet been available and related applications in cryogenic field have been scarce. In this paper, to promote the research along this important direction and to overcome the deficiency of RTLM, a comprehensive evaluation was proposed on the concept of liquid metal with a low melting point below zero centigrade, such as mercury, alkali metal and more additional alloy candidates. With many unique virtues, such liquid metal coolants are expected to open a new technical frontier for heat transfer enhancement, especially in low temperature engineering. Some innovative ways for making low melting temperature liquid metal were outlined to provide a clear theoretical guideline and perform further experiments to discover new materials. Further, a few promising applied situations where low melting temperature liquid metals could play irreplaceableroles were detailed. Finally, some main factors for optimization of low temperature coolant were summarized. Overall, with their evident merits to meet various critical requirements in modem advanced energy and power industries, liquid metals with a low melting temperature below zero centigrade are expected to be the next- generation high-performance heat transfer medium in thermal managements, especially in harsh environment in space.展开更多
文摘The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the viscosity and temperature of hypoeutectic Al-5%Si and eutectic Al- 12.5%Si alloy melts is approximately exponential except for some special zones, but that of the hypereutectic melt is different. The paper discussed the correlation of the viscosity and atomic density, which is thought that the viscosity corresponds to the atomic density to some extent.
基金supported by the National Basic Research Program of China (Grant No. 2007CB613702)International Cooperation Program in Science and Technology (Grant No. 2007DFC50090)
文摘Based on the theory of micro-inhomogeneity of liquid metal,a calculation model is established for the quantitative description of the structural information of metal melts.Only by thermophysical property parameters and basic structural parameters of solid metal,can this model produce the main information of melt structure,including the relative concentration of active atoms,size of atomic clusters and number of short-range order atoms.Based on this model,the main structural information of Al and Ni melts in the not high range above the liquidus is calculated,with results in good agreement with experimental values.Besides,analyzed is the influence of superheating temperature and atomic number on the melt structural information of the first (IA) and second main group (IIA) elements.With temperature increasing,melt structural information regularly changes for both IA and IIA elements.With the atomic number increasing,melt structural information of IA elements changes regularly,for the crystal structures of the IA elements are all of bcc lattice type.However,no notable regular change of melt structural information for IIA elements has been found,mainly because the lattice type of IIA elements is of hcp-fcc-bcc transition.The present work presents an effective way for better understanding metal melt structure and for forecasting the change of the physical property of metal melts.
文摘The current highly integrated electronics and energy systems are raising a growing demand for more sophisticated thermal management in harsh environments such as in space or some other cryogenic environment. Recently, it was found that room temperature liquid metals （RTLM） such as gallium or its alloys could significantly reduce the electronics temperature compared with the conventional coolant, like water, oil or more organic fluid. However, most of the works were focused on RTLM which may subject to freeze under low temperature. So far, a systematic interpretation on the preparation and thermal properties of liquid metals under low temperature （here defined as lower than O^C） has not yet been available and related applications in cryogenic field have been scarce. In this paper, to promote the research along this important direction and to overcome the deficiency of RTLM, a comprehensive evaluation was proposed on the concept of liquid metal with a low melting point below zero centigrade, such as mercury, alkali metal and more additional alloy candidates. With many unique virtues, such liquid metal coolants are expected to open a new technical frontier for heat transfer enhancement, especially in low temperature engineering. Some innovative ways for making low melting temperature liquid metal were outlined to provide a clear theoretical guideline and perform further experiments to discover new materials. Further, a few promising applied situations where low melting temperature liquid metals could play irreplaceableroles were detailed. Finally, some main factors for optimization of low temperature coolant were summarized. Overall, with their evident merits to meet various critical requirements in modem advanced energy and power industries, liquid metals with a low melting temperature below zero centigrade are expected to be the next- generation high-performance heat transfer medium in thermal managements, especially in harsh environment in space.
