For the goal of sulfur recovery, most methods are aimed at the tail gas with high-concentration H2S, but few effective methods are used for low-concentration H2S. In this work, Low-concentration H2S could be purified ...For the goal of sulfur recovery, most methods are aimed at the tail gas with high-concentration H2S, but few effective methods are used for low-concentration H2S. In this work, Low-concentration H2S could be purified well by liquid phase catalytic oxidation (LCO), and the sulfur resource could also be recovered. The absorption solution was prepared by FeCl3 and sulfosalicylic acid. Under the experimental conditions, the conversion of H2S to S could be maintained above 94% at 60 ℃. In order to enhance the economical efficiency of LCO method, the absorption solution was modified by doping Ce, and a series of experiments were designed to investigate its performance. The results showed that the conversion of H2S had no obvious improvement, but above 98% conversion could be gained at 60 ℃, and the H2S conversion rate was enhanced. The optimum addition quality of Ce(NO3)3 was 0.08 g to 50 ml Fe3+ solution.展开更多
基金the Natural Science Foundation of Yunnan Province (2001E0011Q)the Science Foundation of The Education Department of Yunnan Province (0142111 and 07Z11402)
文摘For the goal of sulfur recovery, most methods are aimed at the tail gas with high-concentration H2S, but few effective methods are used for low-concentration H2S. In this work, Low-concentration H2S could be purified well by liquid phase catalytic oxidation (LCO), and the sulfur resource could also be recovered. The absorption solution was prepared by FeCl3 and sulfosalicylic acid. Under the experimental conditions, the conversion of H2S to S could be maintained above 94% at 60 ℃. In order to enhance the economical efficiency of LCO method, the absorption solution was modified by doping Ce, and a series of experiments were designed to investigate its performance. The results showed that the conversion of H2S had no obvious improvement, but above 98% conversion could be gained at 60 ℃, and the H2S conversion rate was enhanced. The optimum addition quality of Ce(NO3)3 was 0.08 g to 50 ml Fe3+ solution.
