Advancements in transition bimetal catalysts for electrochemical 5-hydroxymethylfurfural(HMF) oxidation

The electrochemical oxidation of 5-hydroxymethylfurfural(HMF) represents a significant avenue for sustainable chemical synthesis, owing to its potential to generate high-value derivatives from biomass feedstocks. Transition metal catalysts offer a cost-effective alternative to precious metals for catalyzing HMF oxidation, with transition bimetallic catalysts emerging as particularly promising candidates. In this review, we delve into the intricate reaction pathways and electrochemical mechanisms underlying HMF oxidation, emphasizing the pivotal role of transition bimetallic catalysts in enhancing catalytic efficiency. Subsequently, various types of transition bimetallic catalysts are explored, detailing their synthesis methods and structural modulation strategies. By elucidating the mechanisms behind catalyst modification and performance enhancement, this review sets the stage for upcoming advancements in the field, ultimately advancing the electrochemical HMF conversion and facilitating the transition towards sustainable chemical production.

A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas

Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.

Efficient and stable PtFe alloy catalyst for electrocatalytic methanol oxidation with high resistance to CO

Direct methanol fuel cells(DMFC) are widely considered to be an ideal green energy conversion device but their widespread applications are limited by the high price of the Pt-based catalysts and the instability in terms of surface CO toxicity in long-term operation.Herein,the PtFe alloy nanoparticles(NPs) with small particle size(~4.12 nm) supported on carbon black catalysts with different Pt/Fe atomic ratios(Pt_(1)Fe_(2)/C,Pt_(3)Fe_(4)/C,Pt_(1)Fe_(1)/C,and Pt_(2)Fe_(1)/C) are successfully prepared for enhanced anti-CO poisoning during methanol oxidation reaction(MOR).The optimal atomic ratio of Pt/Fe for the MOR is 1:2,and the mass activity of Pt_(1)Fe_(2)/C(5.40 A mg_(Pt)^(-1)) is 13.5 times higher than that of conventional commercial Pt/C(Pt/C-JM)(0.40 A mg_(Pt)^(-1)).The introduction of Fe into the Pt lattice forms the PtFe alloy phase,and the electron density of Pt is reduced after forming the PtFe alloy.In-situ Fourier transform infrared results indicate that the addition of oxyphilic metal Fe has reduced the adsorption of reactant molecules on Pt during the MOR.The doping of Fe atoms helps to desorb toxic intermediates and regenerate Pt active sites,promoting the cleavage of C-O bonds with good selectivity of CO_(2)(58.1%).Moreover,the Pt_(1)Fe_(2)/C catalyst exhibits higher CO tolerance,methanol electrooxidation activity,and long-term stability than other Pt_(x)Fe_(y)/C catalysts.

CuO/Co_(3)O_(4)Bifunctional Catalysts for Electrocatalytic 5-Hydroxymethylfurfural Oxidation Coupled Cathodic Ammonia Production

The electrochemical coupling of biomass oxidation and nitrogen conversion presents a potential strategy for high value-added chemicals and nitrogen cycling.Herein,in this work,CuO/Co_(3)O_(4)with heterogeneous interface is successfully constructed as a bifunctional catalyst for the electrooxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid and the electroreduction of nitrate to ammonia(NH_(3)).The open-circuit potential spontaneous experiment shows that more 5-hydroxymethylfurfural molecules are adsorbed in the Helmholtz layer of the CuO/Co_(3)O_(4)composite,which certifies that the CuO/Co_(3)O_(4)heterostructure is conducive to the kinetic adsorption of 5-hydroxymethylfurfural.In situ electrochemical impedance spectroscopy further shows that CuO/Co_(3)O_(4)has faster reaction kinetics and lower reaction potential in oxygen evolution reaction and 5-hydroxymethylfurfural electrocatalytic oxidation.Moreover,CuO/Co_(3)O_(4)also has a good reduction effect on NO_(3)^(-).The ex-situ Raman spectroscopy shows that under the reduction potential,the metal oxide is reduced,and the generated Cu_(2)O can be used as a new active site for the reaction to promote the electrocatalytic conversion of NO_(3)^(-)to NH_(3) synthesis.This work provides valuable guidance for the synthesis of value-added chemicals by 5-hydroxymethylfurfural electrocatalytic oxidation coupled with NO_(3)^(-)while efficiently producing NH_(3).

Polygonal mesopores microflower catalysts for the catalytic oxidation of 2-nitro-4-methylsulfonyltoluene to 2-nitro-4-methylsulfonylbenzoic acid in a continuous-flow microreactor

The development of efficient systems for the catalytic oxidation of 2-nitro-4-methylsulfonyltoluene(NMST)to 2-nitro-4-methylsulfonyl benzoic acid(NMSBA)with atmospheric air or molecular oxygen in alkaline medium presents a significant challenge for the chemical industry.Here,we report the synthesis of FeOOH/Fe_(3)O_(4)/metal-organic framework(MOF)polygonal mesopores microflower templated from a MIL-88B(Fe)at room temperature,which exposes polygonal mesopores with atomistic edge steps and lattice defects.The obtained FeOOH/Fe_(3)O_(4)/MOF catalyst was adsorbed onto glass beads and then introduced into the microchannel reactor.In the alkaline environment,oxygen was used as oxidant to catalyze the oxidation of NMST to NMSBA,showing impressive performance.This sustainable system utilizes oxygen as a clean oxidant in an inexpensive and environmentally friendly NaOH/methanol mixture.The position and type of substituent critically affect the products.Additionally,this sustainable protocol enabled gram-scale preparation of carboxylic acid and benzyl alcohol derivatives with high chemoselectivities.Finally,the reactions can be conducted in a pressure reactor,which can conserve oxygen and prevent solvent loss.Moreover,compared with the traditional batch reactor,the self-built microchannel reactor can accelerate the reaction rate,shorten the reaction time,and enhance the selectivity of catalytic oxidation reactions.This approach contributes to environmental protection and holds potential for industrial applications.

Selective photooxidation of methane to C1 oxygenates by constructing heterojunction photocatalyst with mild oxidation ability

Selective photocatalytic aerobic oxidation of methane to value-added chemicals offers a promising pathway for sustainable chemical industry,yet remains a huge challenge owing to the consecutive overoxidation of primary products.Here,a type II heterojunction were constructed in Ag-AgBr/ZnO to reduce the oxidation potential of stimulated holes and prevent the undesirable CH_(4) overoxidation side reactions.For photocatalytic oxidation of methane under ambient temperature,the products yield of 1499.6μmol gcat^(-1) h^(-1) with a primary products selectivity of 77.9%was achieved over Ag-AgBr/ZnO,which demonstrate remarkable improvement compared to Ag/ZnO(1089.9μmol gcat^(-1) h^(-1) ,40.1%).The superior activity and selectivity result from the promoted charge separation and the redox potential matching with methane activation after introducing AgBr species.Mechanism investigation elucidated that the photo-generated holes transferred from the valence band of ZnO to that of AgBr,which prevent H_(2)O oxidation and enhance the selective generation of•OOH radical.

Advancements in cobalt-based oxide catalysts for soot oxidation: Enhancing catalytic performance through modification and morphology control

The widespread use of diesel engines results in significant environmental contamination due to emitted pollutants,particularly soot particles.These pollut-ants are detrimental to public health.At present,one of the most effective ways to remove soot particles is the catalytic diesel particulate filter after-treatment tech-nology,which requires the catalyst to have superior low temperature activity.Compared with cerium oxide which is widely used,cobalt oxide in transition metal oxides has been widely studied in recent years because of its high redox ability and easy to control morphology.This paper elaborates on the influence of modification techniques such as doping,loading,and solid solution on the catalytic performance of cobalt-based catalysts in soot oxidation.Along the same lines,it further reviews the research progress on cobalt-based oxide catalysts with specific dimensional structures and morphologies in soot oxidation.Finally,it provides an outlook on the challenges faced by the theoretical basis and applied research of cobalt-based catalysts in soot oxidation.

Influences of the [Co^2＋]/[Co^3＋] Ratio on the Process of Liquid-phase Oxidation of Toluene by Air

Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH3COO)2.4H2O as catalyst.The Co2+ concentration [Co2+] was determined by extraction spectrophotometry and hereby the Co3+ concentration [Co3+] was obtained by mass balance.The results showed that [Co3+] reached the maximum at about 25-30min.[Co3+] increased with increasing Co catalyst amount at total Co concentration<150 mg.L-1 of toluene.The conversion of toluene,yield and selectivity of benzoic acid increased with the increasing [Co3+/Co2+] max.A high [Co3+] and a high [Co3+]/[Co2+] ratio are beneficial to the reaction.

Kinetics and Mechanism Modeling of Liquid-Phase Toluene Oxidation to Benzaldehyde Catalyzed by Mn–Mo Oxide

In this study, liquid-phase aerobic oxidation of toluene catalyzed by Mn–Mo oxide was conducted in a 1.0 L batch reactor. The macroscopic kinetics of toluene consumption and benzaldehyde generation at 413–443 K were obtained from a combination of experimental observation and hypothetical models. The results clearly showed that both the oxidation rate of toluene and generation rate of the aromatic product were proportional to the concentration of the substrate, the partial pressure of oxygen and the surface area of the catalyst. The energy barrier of toluene oxidation to benzyl alcohol was the highest(≈ 81 kJ mol^(-1)), while that of benzyl alcohol oxidation to benzaldehyde was the lowest(≈ 57 kJ mol^(-1)). Moreover, the activation energy of further oxidation of benzaldehyde in an acetic acid solvent was only slightly lower(≈ 1.9 kJ mol^(-1)) than that of toluene oxidation. Significantly, the transformation of benzyl alcohol indeed contributed to the generation of benzaldehyde and this step conformed to a first-order parallel-consecutive model. Increased reaction temperature and residence time favored the transformation of benzyl alcohol to benzaldehyde. In addition, doping with molybdenum at Mn/Mo = 3/1 enhanced the catalytic performance of the heterogeneous catalyst and was attributed to the presence of a synergetic effect between different metal cations. Regarding the microscopic kinetics, the LH-OS-ND mechanism(Langmuir–Hinshelwood adsorption of reagents on the same type of active sites and non-dissociative adsorption of oxygen) was verified as responsible for the heterogeneous oxidation of toluene. Oxygen and benzaldehyde were weakly adsorbed(Δ H_(ads,Oxy) ≈^(-1)5 kJ mol^(-1), Δ H _(ads)0,Bald) ≈-30 kJ mol^(-1)), but showed strong mobility(Δ S_(ads,Oxy) ≈-22 J mol^(-1) K^(-1)), Δ S_(ads,Bald) ≈-39 J mol^(-1) K^(-1)). The fundamental intrinsic rates were deduced based on the LH-OS-ND mechanism and showed great consistency with the macroscopic results.

Progress in research on catalysts for catalytic oxidation of formaldehyde

Formaldehyde（HCHO）is carcinogenic and teratogenic,and is therefore a serious danger to human health.It also adversely affects air quality.Catalytic oxidation is an efficient technique for removing HCHO.The development of highly efficient and stable catalysts that can completely convert HCHO at low temperatures,even room temperature,is important.Supported Pt and Pd catalysts can completely convert HCHO at room temperature,but their industrial applications are limited because they are expensive.The catalytic activities in HCHO oxidation of transition-metal oxide catalysts such as manganese and cobalt oxides with unusual morphologies are better than those of traditional MnO2,Co3O4,or other metal oxides.This is attributed to their specific structures,high specific surface areas,and other factors such as active phase,reducibility,and amount of surface active oxygens.Such catalysts with various morphologies have great potential and can also be used as catalyst supports.The loading of relatively cheap Ag or Au on transition-metal oxides with special morphologies potentially improves the catalytic activity in HCHO removal at room temperature.The preparation and development of new nanocatalysts with various morphologies and structures is important for HCHO removal.In this paper,research progress on precious-metal and transition-metal oxide catalyst systems for HCHO oxidation is reviewed; topics such as oxidation properties,structure–activity relationships,and factors influencing the catalytic activity and reaction mechanism are discussed.Future prospects and directions for the development of such catalysts are also covered.

Propene and CO oxidation on Pt/Ce-Zr-SO_4^(2-) diesel oxidation catalysts:Effect of sulfate on activity and stability

Platinum/cerium-zirconium-sulfate（Pt/Ce-Zr-SO_4^（2-）） catalysts were prepared by wetness impregnation.Catalytic activities were evaluated from the combustion of propene and CO.Sulfate（SO_4^（2-））addition improved the catalytic activity significantly.When using Pt/Ce-Zr-SO_4^（2-） with 10 wt%SO_4^（2-）,the temperature for 90%conversion of propene and CO decreased by 75℃ compared with Pt/Ce-Zr.The conversion exceeded 95%at 240℃ even after 0.02%sulfur dioxide poisoning for 20 h.Temperature-programmed desorption of CO and X-ray photoelectron spectroscopy analyses revealed an improvement in Pt dispersion onto the Ce-Zr-SO_4^（2-） support,and the increased number of Pt particles built up more Pt^（-）-（SO_4^（2-））^（-） couples,which resulted in excellent activity.The increased total acidity and new Bronsted acid sites on the surface provided the Pt/Ce-Zr-SO_4^（2-） with good sulfur resistance.

Single atom gold catalysts for low-temperature CO oxidation

Low‐temperature CO oxidation is important for both fundamental studies and practical applica‐tions. Supported gold catalysts are generally regarded as the most active catalysts for low‐temperature CO oxidation. The active sites are traditionally believed to be Au nanoclusters or nanoparticles in the size range of 0.5–5 nm. Only in the last few years have single‐atom Au catalysts been proved to be active for CO oxidation. Recent advances in both experimental and theoretical studies on single‐atom Au catalysts unambiguously demonstrated that when dispersed on suitable oxide supports the Au single atoms can be extremely active for CO oxidation. In this mini‐review, recent advances in the development of Au single‐atom catalysts are discussed, with the aim of illus‐trating their unique catalytic features during CO oxidation.

Catalytic wet oxidation of aniline over Ru catalysts supported on a modified TiO_2

The catalytic wet air oxidation of aniline over Ru catalysts supported on modified Ti 2 （Ti 2, Ti0.9Ce0.1O2, Ti0.9Zr0.1O2） is investigated. A series of characterization techniques are conducted to determine the relationship between the physico-chemical properties and the catalytic performance. As a result of the good metal dispersion and large number of surface oxygen species, the Ru/Ti0.9 Zr0.1O2 catalyst presents the best catalytic activity among the tested samples. The effects of the operating conditions on the reaction are investigated and the optimal reaction conditions are determined. Based on the relationship between the by-products concentration and the reaction time, the reaction path for the catalytic oxidation of aniline is established. Carbonaceous deposits on the surface of the support are known to be the main reason for catalyst deactivation. The catalysts maintain a constant activity even after three consecutive cycles.

SnO_2 nano-sheet as an efficient catalyst for CO oxidation

Polycrystalline SnO2 fine powder consisting of nano-particles （SnO2-NP）, SnO2 nano-sheets （SnO2-NS）, and SnO2 containing both nano-rods and nano-particles （SnO2-NR＋NP） were prepared and used for CO oxidation. SnO2-NS possesses a mesoporous structure and has a higher surface area, larger pore volume, and more active species than SnO2-NP, and shows improved activity. In contrast, although SnO2-NR＋NP has only a slightly higher surface area and pore volume, and slightly more active surface oxygen species than SnO2-NP, it has more exposed active （110） facets, which is the reason for its improved oxidation activity. Water vapor has only a reversible and weak influence on SnO2-NS, therefore it is a potential catalyst for emission control processes.

Electroless Deposition of Nickel Nanowire and Nanotube Arrays as Supports for Pt-Pd Catalyst for Ethanol Electrooxidation

Nickel nanowire and nanotube arrays as supports for Pt-Pd catalyst were prepared by elec- troless deposition with anodic aluminum oxide template. Pt-Pd composite catalyst was de- posited on the arrays by displacement reaction. SEM images show that the nickel nanowires have an average diameter of I00 nm and the nickel nanotubes have an average inner diameter of 200 nm. EDS scanning reveals that elemental Pt and Pd disperse uniformly on the arrays. Cyclic voltammetry study indicates that the nickel nanotube array loaded with Pt-Pd pos- sesses a higher electrochemical activity for ethanol oxidation than the nickel nanowire array with Pt-Pd.

Flower-like 3D CuO microsphere acting as photocatalytic water oxidation catalyst

Flower-like 3D CuO microspheres were synthesized and used to photo-catalyze water oxidation under visible light.The structure of the CuO microspheres was characterized by scanning electron microscopy,transmission electron microscopy,infrared,powder X-ray diffraction,electron dispersive spectroscopy,Raman and X-ray photoelectron spectroscopy（XPS）.This is the first time that a copper oxide was demonstrated as a photocatalytic water oxidation catalyst under near neutral conditions.The catalytic activity of CuO microspheres in borate buffer shows the best performance with O2 yield of 11.5%.No change in the surface properties of CuO before and after the photocatalytic reaction was seen by XPS,which showed good catalyst stability.A photocatalytic water oxidation reaction mechanism catalyzed by the CuO microspheres was proposed.

CO oxidation over Au/ZrLa-doped CeO_2 catalysts: Synergistic effect of zirconium and lanthanum

The physicochemical properties of nanosized Au catalysts supported on doped CeO2 and their cata‐lytic performance for the CO oxidation reaction were investigated. The Au/Zr‐doped CeO2 catalyst is much more active than undoped Au/CeO2, while Au/ZrLa‐doped CeO2 shows the highest activity. Characterization of the catalysts by X‐ray diffraction, transmission electron microscopy （TEM）, high‐resolution TEM, and the X‐ray absorption fine structure technique shows high homogeneity of the oxide supports and well‐dispersed nanosized Au nanoparticles. Raman spectroscopy, X‐ray photoelectron spectroscopy, and H2‐tempeature‐programmed reduction show that the surface oxygen species are the main factor for the catalytic activity in the CO oxidation reaction, while the supported Au species can improve the redox properties and create oxygen vacancy sites on the support. The oxidation state of Au is not the main factor governing the activity of Au/doped‐CeO2 catalysts. Additionally, the synergistic effect of Zr and La is discussed.

Direct oxidation of the C_(sp3)-H bonds of N-heterocyclic compounds to give the corresponding ketones using a reusable heterogeneous MnO_x-N@C catalyst

Novel reusable MnOx‐N@C catalyst has been developed for the direct oxidation of N‐heterocycles under solvent‐free conditions using TBHP as benign oxidant to give the corresponding N‐heterocyclic ketones. The catalytic system exhibited a broad substrate scope and excellent regi‐oselectivity, as well as being amenable to gram‐scale synthesis. This MnOx‐N@C catalyst also showed good reusability and was successfully recycled six times without any significant loss of activity.

High activity of a Pt decorated Ni/C nanocatalyst for hydrogen oxidation

The Pt decorated Ni/C nanocatalysts were prepared for hydrogen oxidation reaction（HOR） in fuel cell.By regulating the contents of Pt and Ni in the catalyst,both the composition and the structure affected the electrochemical catalytic characteristics of the Pt-Ni/C catalysts.When the Pt mass content was 3.1% percent and that of Ni was 13.9% percent,the Pt-Ni/C-3 catalyst exhibited a larger electrochemically active surface area and a higher exchange current density toward HOR than those of pure supported platinum sample.Our study demonstrates a feasible approach for designing the more efficient catalysts with lower content of noble metal for HOR in fuel cell.

Pyridinic-N doping carbon layers coupled with tensile strain of FeNi alloy for activating water and urea oxidation

Exploitation of oxygen evolution reaction(OER)and urea oxidation reaction(UOR)catalysts with high activity and stability at large current density is a major challenge for energy-saving H_(2) production in water electrolysis.Herein,we use the pyridinic-N doping carbon layers coupled with tensile strain of FeNi alloy activated by NiFe_(2)O_(4)(FeNi/NiFe_(2)O_(4)@NC)for efficiently increasing the performance of water and urea oxidation.Due to the tensile strain effect on FeNi/NiFe_(2)O_(4)@NC,it provides a favorable modulation on the electronic properties of the active center,thus enabling amazing OER(η_(100)=196 mV)and UOR(E_(10)=1.32 V)intrinsic activity.Besides,the carbon-coated layers can be used as armor to prevent FeNi alloy from being corroded by the electrolyte for enhancing the OER/UOR stability at large current density,showing high industrial practicability.This work thus provides a simple way to prepare high-efficiency catalyst for activating water and urea oxidation.