Simultaneous resonance of an axially moving ferromagnetic thin plate under a line load in a time-varying magnetic field

In this paper,the simultaneous resonance of a ferromagnetic thin plate in a time-varying magnetic field,having axial speed and being subjected to a periodic line load,is studied.Based on the large deflection theory of thin plates and electromagnetic field theory,the nonlinear vibration differential equation of the plate is obtained by using the Hamilton′s principle and the Galerkin method.Then the boundary condition in which the longer opposite sides are clamped and hinged is considered.The dimensionless nonlinear differential equations are solved by using the method of multiple scales,and the analytical solution is given.In addition,the stability analysis is also carried out by using Lyapunov stability theory.Through numerical analysis,the variation curves of system resonance amplitude with frequency tuning parameter,magnetic field strength and external excitation amplitude are obtained.Different parameters that have significant effects on the response of the system,such as the thickness,the axial velocity,the magnetic field intensity,the position,and the frequency of external excitation,are considered and analyzed.The results show that the system has multiple solution regions and obvious nonlinear coupled characteristics.

Non-harmonic resonance of viscoelastic structures subjected to time-dependent exponentially decreasing transverse distributed loads

In this paper,the non-harmonic resonance of Bernoulli viscoelastic beams,Kirchhoff viscoelastic plates,Timoshenko viscoelastic beams,and Mindlin viscoelastic plates subjected to time-dependent exponentially decreasing transverse distributed load is investigated for the first time.The constitutive equations are expressed utilizing Boltzmann integral law with a constant bulk modulus.The displacement vector is approximated by employing the separation of variables method.The Laplace transformation is used to transfer equations from the time domain to the Laplace domain and vice versa.The novel point of the proposed method is to express,prove and calculate the critical time in which the displacement will be several times the displacement at time zero.In addition,this new method calculates the maximum deflection at the critical time,explicitly and exactly,without any need to follow the time-displacement curve with a low computational cost.Additionally,the proposed method introduces the critical range of time so that the responses are greater than the responses at time zero.

High-speed directly modulated distributed feedback laser based on detuned loading and photon-photon resonance effect

A monolithic integrated two-section distributed feedback(TS-DFB)semiconductor laser for high-speed direct modulation is proposed and analyzed theoretically.The grating structure of the TS-DFB laser is designed by the reconstructionequivalent-chirp(REC)technique,which can reduce the manufacturing cost and difficulty,and achieve high wavelength controlling accuracy.The detuned loading effect and the photon-photon resonance(PPR)effect are utilized to enhance the modulation bandwidth of the TS-DFB laser,exceeding 37 GHz,while that of the conventional one-section DFB laser is only 16 GHz.When the bit rate of the non-return-to-zero(NRZ)signal reaches 55 Gb/s,a clear eye diagram with large opening can still be obtained.These results show that the proposed method can enhance the modulation bandwidth of DFB laser significantly.

Local Bifurcation Analysis of Parameter-Excited Resonance of Pipes under Thermal Load

The stability and local bifurcation of the lateral parameter-excited resonance of pipes induced by the pulsating fluid velocity and thermal load are studied. A mathematical model for a simply supported pipe is developed according to Hamilton principle. The Galerkin method is adopted to discretize the partial differential equations to the ordinary differential equations. The method of multiple scales and the singularity theory are utilized to analyze the stability and bifurcation of the trivial and non-trivial solutions. The transition sets and bifurcation diagrams are obtained both in the unfolding parameter space and physical parameter space, which can reveal the relationship between the thermal field parameter and the dynamic behaviors of the pipe. The numerical results demonstrate the accuracy of the single-mode expansion of the solution and verify the stability and local bifurcation analyses. The critical thermal rates are obtained both by the numerical simulation and the local bifurcation analysis. The natural frequency of lateral vibration decreases as the mean fluid velocity or the thermal rate increases according to the numerical results. The present work can provide valuable information for the design of the pipeline and controllers to prevent structural instability.

High-resolution,three-dimensional magnetic resonance imaging axial load dynamic study improves diagnostics of the lumbar spine in clinical practice

BACKGROUND The response to axial physiological pressure due to load transfer to the lumbar spine structures is among the various back pain mechanisms.Understanding the spine adaptation to cumulative compressive forces can influence the choice of personalized treatment strategies.AIM To analyze the impact of axial load on the spinal canal’s size,intervertebral foramina,ligamenta flava and lumbosacral alignment.METHODS We assessed 90 patients using three-dimensional isotropic magnetic resonance imaging acquisition in a supine position with or without applying an axial compression load.Anatomical structures were measured in the lumbosacral region from L1 to S1 in lying and axially-loaded magnetic resonance images.A paired t test atα=0.05 was used to calculate the observed differences.RESULTS After axial loading,the dural sac area decreased significantly,by 5.2%on average(4.1%,6.2%,P<0.001).The intervertebral foramina decreased by 3.4%(2.7%,4.1%,P<0.001),except for L5-S1.Ligamenta flava increased by 3.8%(2.5%,5.2%,P<0.001),and the lumbosacral angle increased.CONCLUSION Axial load exacerbates the narrowing of the spinal canal and intervertebral foramina from L1-L2 to L4-L5.Cumulative compressive forces thicken ligamenta flava and exaggerate lumbar lordosis.

Low noise,continuous-wave single-frequency 1.5-μm laser generated by a singly resonant optical parametric oscillator

We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was pumped by a CW single-frequency Nd：YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit （SNL） at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz.

考虑整流性负载特性的LCC-S型无线电能传输系统优化设计

无线电能传输系统中的整流性负载具有非线性特征,而对系统传输特性分析和谐振参数设计时常采用基波分析法,将整流性负载等效为纯电阻,导致理论分析与实际存在一定偏差、系统偏离谐振状态。针对该问题,以LCC-S型无线电能传输系统为研究对象,考虑谐波以及整流性负载的非线性,对系统传输特性进行分析,进而提出基于整流性负载补偿的负载阻抗和接收端串联谐振电容参数的计算方法,并对逆变电路开关特性进行分析验证。所提接收端谐振参数设计方法能够使系统接收端回路谐振,提高系统的输出功率;降低逆变电路开关管的关断电流,提升系统的传输效率。搭建了一套2.5 kW的LCC-S型无线电能传输实验平台,验证了理论分析与所提参数设计方法的有效性和正确性。

Effect of NaCl Concentration on the Cumulative Strain and Pore Distribution of Clay under Cyclic Loading

Clay,as the most common soil used for foundationfill,is widely used in various infrastructure projects.The phy-sical and mechanical properties of clay are influenced by the pore solution environment.This study uses a GDS static/dynamic triaxial apparatus and nuclear magnetic resonance experiments to investigate the effects of cyclic loading on clay foundations.Moreover,the development of cumulative strain in clay is analyzed,and afitting model for cumulative plastic strain is introduced by considering factors such as NaCl solution concentration,con-solidation stress ratio,and cycle number.In particular,the effects of the NaCl solution concentration and con-solidation stress ratio on the pore distribution of the test samples before and after cyclic loading are examined,and the relationship between microscopic pore size and macroscopic cumulative strain is obtained accordingly.Our results show that as the consolidation stress ratio grows,an increasing number of large pores in the soil samples are transformed into small pores.As the NaCl solution concentration becomes higher,the number of small pores gradually decreases,while the number of large pores remains unchanged.Cyclic loading causes the disappearance of the large pores in the samples,and the average pore size before cyclic loading is posi-tively correlated with the axial cumulative strain after cyclic loading.The cumulative strain produced by the soil under cyclic loading is inversely proportional to the NaCl solution concentration and consolidation stress ratio.

血清Trx2、P-tau与脑小血管病患者核磁总负荷评分和认知功能的相关性

目的 探讨脑小血管病患者血清硫氧还蛋白2(Trx2)、磷酸化tau蛋白(P-tau)与核磁总负荷评分和认知功能的相关性。方法 选取2019年7月—2020年7月沧州市中心医院脑小血管病患者94例,根据是否存在认知功能障碍分为认知障碍组(38例)和无认知障碍组(56例);根据核磁总负荷评分分为轻度负荷组(67例)和中重度负荷组(27例)。收集所有患者的一般资料和实验室检测结果,并检测血清Trx2、P-tau水平。采用多因素Logistic回归分析评估脑小血管病患者核磁总负荷和认知功能的影响因素。采用Pearson相关分析评估各项指标与核磁总负荷和认知功能的相关性。结果 认知障碍组和无认知障碍组性别、年龄、饮酒史、吸烟史和高密度脂蛋白胆固醇(HDL-C)、尿酸(UA)、核磁总负荷评分、Trx2、P-tau水平差异均有统计学意义(P<0.05),其他指标差异均无统计学意义(P>0.05)。轻度负荷组与中重度负荷组之间性别、年龄、高血压史和HDL-C、UA、Trx2、P-tau水平差异均有统计学意义(P<0.05),其他指标差异均无统计学意义(P>0.05)。多因素Logistic回归分析结果显示,血清Trx2[比值比(OR)值=2.751,95%可信区间(CI)为1.123~6.738]、血清P-tau(OR=2.651,95%CI为1.180~5.956)是脑小血管病患者认知功能障碍的独立危险因素(P<0.05)。Pearson相关分析结果显示,脑小血管病患者血清Trx2、P-tau与核磁总负荷评分和CMMSE评分均呈正相关(P<0.05)。结论 血清Trx2、P-tau与脑小血管病患者核磁总负荷和认知功能密切相关,检测血清Trx2、P-tau水平有助于评估脑小血管病的严重程度和患者认知功能。

早老素-1基因启动子区-48C/T位点多态性与LOAD的遗传相关性

目的 研究早老素 - 1基因启动子区 - 4 8C/T位点的多态性与迟发性AD(LOAD)的相关性。方法 用常规方法从人外周血白细胞中抽提基因组DNA ,PCR扩增出包含 - 4 8C/T多态性位点的基因片段 ,利用PCR -RFLP技术对 -4 8C/T多态性位点进行基因分型 ,χ2 检验分析 - 4 8C/T多态性位点基因型分布和等位基因频率。结果 以 33例AD病例和32例对照样品的外周血白细胞基因组DNA为模板 ,PCR扩增出了长度为 344bp的包含 - 4 8C/T多态性位点的基因片段。基因分型结果表明 ,33例散发型AD的C和T等位基因频率分别为 4 7%和 5 3% ,C/T和T/T基因型频率分别为 94 %和 6 %。而 32例正常对照的C和T等位基因频率分别为 4 8%和 5 2 % ,C/T和T/T基因型频率分别为 97%和 3%。χ2 检验结果显示 ,病例 -对照样品间C和T等位基因频率及C/C、C/T和T/T基因型的分布均无显著性差异 (χ2 值分别为 0 4 4 3和 0 318,P>0 .0 5 )。结论 在我们研究的群体中 ,早老素 - 1基因启动子区 - 4 8C/T位点的多态性与LOAD无显著的遗传相关性。

基于补偿拓扑切换的MCR-WPT最大效率追踪方法

针对串联串联(S-S)和串联并联(S-P)补偿拓扑结构在大(小)负载场合传输效率低的问题,提出了基于补偿拓扑结构切换的磁耦合谐振式无线电能传输(MCR-WPT)系统最大效率追踪方法.通过建立S-S、S-P等效电路模型提取谐振补偿网络参数,将系统最大传输效率切换点的寻优过程划分成轻载与重载两种工作模式,并使用有源阻抗匹配的方式对系统最大效率点进行自适应追踪.仿真测试结果表明:所提方法在轻载模式下能够维持原有系统最大传输效率,约为84.5%;在重载模式下效率由84.5%提升至91.6%,验证了该方法的有效性.

低速转动多负载MCR-WPT系统研究

目前,磁耦合谐振式无线电能传输MCR-WPT(magnetic coupling resonance-wireless power transmission)的研究主要集中在单发射多负载静止和单发射单负载转动2种形式。通过对单发射低速转动多负载状态下的系统进行研究,建立单发射多负载系统并进行理论分析,使用COMSOL对静止状态下多负载接收线圈进行仿真,设置静止状态与旋转状态作对比实验,分析接收端转动对MCR-WPT系统传输效率的影响,探讨低速旋转状态下系统传输效率的变化规律。结果表明,在低速转动三负载时,系统能够保持稳定的功率输出,单个负载的传输效率可以达到23.260%,总传输效率达到69.768%,低速转动对传输效率影响较小。

Nonlinear Resonance of the Rotating Circular Plate under Static Loads in Magnetic Field

The rotating circular plate is widely used in mechanical engineering, meanwhile the plates are often in the electromagnetic field in modern industry with complex loads. In order to study the resonance of a rotating circular plate under static loads in magnetic field, the nonlinear vibration equation about the spinning circular plate is derived according to Hamilton principle. The algebraic expression of the initial deflection and the magneto elastic forced disturbance differential equation are obtained through the application of Galerkin integral method. By mean of modified Multiple scale method, the strongly nonlinear amplitude-frequency response equation in steady state is established. The amplitude frequency characteristic curve and the relationship curve of amplitude changing with the static loads and the excitation force of the plate are obtained according to the numerical calculation. The influence of magnetic induction intensity, the speed of rotation and the static loads on the amplitude and the nonlinear characteristics of the spinning plate are analyzed. The proposed research provides the theory reference for the research of nonlinear resonance of rotating plates in engineering.

NMR-based damage characterisation of backfill material in host rock under dynamic loading

It is not uncommon that backfill material used in underground mining being exposed to repetitive dynamic stresses induced by blasting operations or rockburst events. Understanding the strength and fracture evolution of backfilled stopes is critical to maintain the long-term stope stability and ensure safe mining activities. This paper aims to study the damage evolution of the backfill material and its host rock behaviour under three-dimensional(3D) dynamic loading. Using a true-triaxial testing machine, multiple samples of backfill material enclosed by country rock were fabricated and tested under various dynamic loadings with different true-triaxial confining stress conditions. In addition, the nuclear magnetic resonance(NMR) measurement was conducted on the samples before and after exerting static and dynamic loading to obtain their porosity distribution changes. The experiment results suggested that with the increase of the dynamic loading, the porosity of the backfill sample goes through a two-stage process,which shows a slightly linear decrease and then followed by an exponential increase. The research findings can help understand the damage mechanism and fracture development of backfilled stopes and its host rock in deep underground mines, which are constantly subject to the combination of 3D static confining stress and dynamic loading.

Topology optimization of 3D structures with design-dependent loads

Topology optimization of continuum structures with design-dependent loads has long been a challenge. In this paper, the topology optimization of 3D structures subjected to design-dependent loads is investigated. A boundary search scheme is proposed for 3D problems, by means of which the load surface can be identified effectively and efficiently, and the difficulties arising in other approaches can be overcome. The load surfaces are made up of the boundaries of finite elements and the loads can be directly applied to corresponding element nodes, which leads to great convenience in the application of this method. Finally, the effectiveness and efficiency of the proposed method is validated by several numerical examples.

Numerical study on wave loads and motions of two ships advancing in waves by using three-dimensional translating-pulsating source

A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.

Large deflections of non-prismatic nonlinearly elastic cantilever beams subjected to non-uniform continuous load and a concentrated load at the free end

This work studies large deflections of slen- der, non-prismatic cantilever beams subjected to a combined loading which consists of a non-uniformly distributed con- tinuous load and a concentrated load at the free end of the beam. The material of the cantilever is assumed to be non- linearly elastic. Different nonlinear relations between stress and strain in tensile and compressive domain are considered. The accuracy of numerical solutions is evaluated by com- paring them with results from previous studies and with a laboratory experiment.

适用于不平衡负载的构网型PV-VSG控制策略

独立构网时,构网型光伏自同步电压源自生成的电压和频率易受不平衡负载影响。针对该问题,提出在构网型光伏自同步电压源控制策略基础上增加谐振控制环,用于抑制不平衡负载下控制环路中的谐振分量。首先阐述了构网型光伏自同步电压源基本工作原理、关键控制方程,其次介绍了不平衡负载下微电网输出电压不平衡机理、给出了谐振控制器参数设计。最后对所提控制策略进行仿真和实验测试,结果验证了该方法的正确性和有效性。

Inhibition of Notch 1 signaling in the subacute stage after stroke promotes striatal astrocyte-derived neurogenesis

Inhibition of Notch1 signaling has been shown to promote astrocyte-derived neurogenesis after stroke.To investigate the regulatory role of Notch1 signaling in this process,in this study,we used a rat model of stroke based on middle cerebral artery occlusion and assessed the behavior of reactive astrocytes post-stroke.We used theγ-secretase inhibitor N-[N-(3,5-diuorophenacetyl)-1-alanyl]-S-phenylglycine t-butylester(DAPT)to block Notch1 signaling at 1,4,and 7 days after injury.Our results showed that only administration of DAPT at 4 days after stroke promoted astrocyte-derived neurogenesis,as manifested by recovery of white matter fiber bundle integrity on magnetic resonance imaging,which is consistent with recovery of neurologic function.These findings suggest that inhibition of Notch1 signaling at the subacute stage post-stroke mediates neural repair by promoting astrocyte-derived neurogenesis.

Effect of Mild-calcined Coal Gangue Additionon Hot Strength and Refractoriness Under Loadof Ultra Low Cement Castablesin Al_2O_3-SiO_2 System

This work explored the way to improve hot modulus q/＇ rupture （HMOR） and refractoriness under load （RUL） by adding mild-calcined coal gangue （MCG） in Al2O3 -SiO2 ultra low cement （ULC） castables, making use of the in-situ effect of the MCG during heating-up. The influence of respective additions of 5%, 10% and 1.5% of the MCG powders calcined at 700℃ was investigated on HMOR at 1400 ℃ and RUL of the castables. With increased addition of the MCG, HMOR and RUL become significantly enhanced. At 10% of the MCG addition, HMOR reaches 3 MPa, as compared to 0. 3 MPa in the case of no MCG addition. RUL of the specimens dried at 110 ℃for 24 h can be increased by some 270 ℃ with 10% of the MCG addition. RUL 0.11 the specimens preheated at 1 500℃ for 3 h maintains the growth trend with the MCG addition increasing. The microstructure of the heated castable samples was investigated by means of SEM. The in-situ formed needle-like and interlaced mullite in the matrix is contributive to the tmprovement.