Modeling load distribution for rural photovoltaic grid areas using image recognition

Expanding photovoltaic(PV)resources in rural-grid areas is an essential means to augment the share of solar energy in the energy landscape,aligning with the“carbon peaking and carbon neutrality”objectives.However,rural power grids often lack digitalization;thus,the load distribution within these areas is not fully known.This hinders the calculation of the available PV capacity and deduction of node voltages.This study proposes a load-distribution modeling approach based on remote-sensing image recognition in pursuit of a scientific framework for developing distributed PV resources in rural grid areas.First,houses in remote-sensing images are accurately recognized using deep-learning techniques based on the YOLOv5 model.The distribution of the houses is then used to estimate the load distribution in the grid area.Next,equally spaced and clustered distribution models are used to adaptively determine the location of the nodes and load power in the distribution lines.Finally,by calculating the connectivity matrix of the nodes,a minimum spanning tree is extracted,the topology of the network is constructed,and the node parameters of the load-distribution model are calculated.The proposed scheme is implemented in a software package and its efficacy is demonstrated by analyzing typical remote-sensing images of rural grid areas.The results underscore the ability of the proposed approach to effectively discern the distribution-line structure and compute the node parameters,thereby offering vital support for determining PV access capability.

A novel approach to the dynamic response analysis of Euler-Bernoulli beams resting on a Winkler soil model and subjected to impact loads

This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less importance in controlling the maximum response to impulsive loadings because the maximum response is reached in a very short time,before the damping forces can dissipate a significant portion of the energy input into the system.The development of two sine series solutions,relating to different types of impulsive loadings,one involving a single concentrated force and the other a distributed line load,are presented.This study revealed that when a simply supported Euler-Bernoulli beam,resting on a Winkler soil model,is subject to an impact load,the resulting vertical displacements,bending moments and shear forces produced along the span of the beam are considerably affected.In particular,the quantification of this effect is best observed,relative to the corresponding static solution,via an amplification factor.The computed impact amplification factors,for the sub-grade moduli used in this study,were in magnitude greater than 2,thus confirming the multiple-degree-of-freedom nature of the problem.

Adaptive Load Balancing for Parameter Servers in Distributed Machine Learning over Heterogeneous Networks

In distributed machine learning(DML)based on the parameter server(PS)architecture,unbalanced communication load distribution of PSs will lead to a significant slowdown of model synchronization in heterogeneous networks due to low utilization of bandwidth.To address this problem,a network-aware adaptive PS load distribution scheme is proposed,which accelerates model synchronization by proactively adjusting the communication load on PSs according to network states.We evaluate the proposed scheme on MXNet,known as a realworld distributed training platform,and results show that our scheme achieves up to 2.68 times speed-up of model training in the dynamic and heterogeneous network environment.

Load Distribution of Base Stations in User-Centric Heterogeneous UDN

In ultra-dense networks(UDN),multiple association can be regarded as a user-centric pattern in which a user can be served by multiple base stations(BSs).The data rate and quality of service can be improved.However,BSs in user-centric paradigm are required to serve more users due to this multiple association scheme.The improvement of system performance may be limited by the improving load of BSs.In this letter,we develope an analytical framework for the load distribution of BSs in heterogeneous user-centric UDN.Based on open loop power control(OLPC),a user-centric scheme is considered in which the clustered serving BSs can provide given signal to interference plus noise ratio(SINR)for any typical user.As for any BS in different tiers,by leveraging stochastic geometry,we derive the Probability Mass Function(PMF)of the number of the served users,the Cumulative Distribution Function(CDF)of total power consumption,and the CDF bounds of downlink sum data rate.The accuracy of the theoretical analysis is validated by numerical simulations,and the effect the system parameters on the load of BSs is also presented.

Electric Vehicle Charging Capacity of Distribution Network Considering Conventional Load Composition

At present,the large-scale access to electric vehicles(EVs)is exerting considerable pressure on the distribution network.Hence,it is particularly important to analyze the capacity of the distribution network to accommodate EVs.To this end,we propose a method for analyzing the EV capacity of the distribution network by considering the composition of the conventional load.First,the analysis and pretreatment methods for the distribution network architecture and conventional load are proposed.Second,the charging behavior of an EVis simulated by combining the Monte Carlo method and the trip chain theory.After obtaining the temporal and spatial distribution of the EV charging load,themethod of distribution according to the proportion of the same type of conventional load among the nodes is adopted to integrate the EV charging load with the conventional load of the distribution network.By adjusting the EV ownership,the EV capacity in the distribution network is analyzed and solved on the basis of the following indices:node voltage,branch current,and transformer capacity.Finally,by considering the 10-kV distribution network in some areas of an actual city as an example,we show that the proposed analysis method can obtain a more reasonable number of EVs to be accommodated in the distribution network.

Improvement on Conventional Load Distribution Algorithm in Hot Tandem Mills

Load distribution is a key technology in strip hot rolling process, which influences the coil＇s mierostrueture and performance. Currently, Newton-Raphson algorithm is applied to load distribution of hot tandem mills in many hot rolling plants and has some serious defects such as having a strict restriction on initial iterative calculation value and requiring coefficient matrix of nonlinear equations to be nonsingular. To eliminate these defects and improve the online performance of the process control computer, Newton descendent numeric algorithm is introduced to this field to widen the initial value range and a new model named error conversion algorithm is put forth to deal with special conditions when the coefficient matrix is singular. Furthermore, considering the characteristics of load distribution, a condition of strip thickness distribution abnormality and corresponding solutions are provided which ensure that rolling parameters can be calculated normally. Simulation results show that the improved algorithm has overcome the defects of the Newton-Raphson algorithm and is suitable for online application.

Behavior of Pile Groups under Lateral Load

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p-y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.

Green's functions for uniformly distributed loads acting on an inclined line in a poroelastic layered site

Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line in a poroelastie layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green＇s functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.

Research on Rolling Load Distribution Method based on Data Mining

A new method of establishing rolling load distribution model was developed by online intelligent information-processing technology for plate rolling. The model combines knowledge model and mathematical model with using knowledge discovery in database （KDD） and data mining （DM） as the start. The online maintenance and optimization of the load model are realized. The effectiveness of this new method was testified by offline simulation and online application.

THEORETICAL INVESTIGATION ON STATE OF LOAD DISTRIBUTION AMONG CONTACT BEARINGS OF DOUBLE CIRCULAR ARC HELICAL GEARS

A dynamic analysis approcach to investigate the state of load distribution among contact bearings of double circular are belical gears is proposed and a computer program is developed for calculating the factor of iced distribution based on the theory of W-N gears. The changing situations of load distribution among contact bearings of the gears influenced by main issues are analyzed by a series of parametric studies.

Analysis of overload-based cascading failure in multilayer spatial networks

Many complex networks in real life are embedded in space and most infrastructure networks are interdependent,such as the power system and the transport network.In this paper,we construct two cascading failure models on the multilayer spatial network.In our research,the distance l between nodes within the layer obeys the exponential distribution P(l)~exp(-l/ζ),and the length r of dependency link between layers is defined according to node position.An entropy approach is applied to analyze the spatial network structure and reflect the difference degree between nodes.Two metrics,namely dynamic network size and dynamic network entropy,are proposed to evaluate the spatial network robustness and stability.During the cascading failure process,the spatial network evolution is analyzed,and the numbers of failure nodes caused by different reasons are also counted,respectively.Besides,we discuss the factors affecting network robustness.Simulations demonstrate that the larger the values of average degree<k>,the stronger the network robustness.As the length r decreases,the network performs better.When the probability p is small,asζdecreases,the network robustness becomes more reliable.When p is large,the network robustness manifests better performance asζincreases.These results provide insight into enhancing the robustness,maintaining the stability,and adjusting the difference degree between nodes of the embedded spatiality systems.

Analytical solution for functionally graded anisotropic cantilever beam subjected to linearly distributed load

The bending problem of a functionally graded anisotropic cantilever beam subjected to a linearly distributed load is investigated. The analysis is based on the exact elasticity equations for the plane stress problem. The stress function is introduced and assumed in the form of a polynomial of the longitudinal coordinate. The expressions for stress components are then educed from the stress function by simple differentiation. The stress function is determined from the compatibility equation as well as the boundary conditions by a skilful deduction. The analytical solution is compared with FEM calculation, indicating a good agreement.

Effects of drive current rise-time and initial load density distribution on Z-pinch characteristics

A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of drive current rise-time and initial load density distribution by using the typical experimental parameters of tungsten wire-array Z- pinch on the Qiangguang-I generator. The numerical results show that as the drive current rise-time is shortened, x-ray radiation peak power, energy, peak plasma density and peak ion temperature increase approximately linearly, but among them the x-ray radiation peak power increases more quickly. As the initial plasma density distribution in the radial direction becomes gradually flattened, the peak radiation power and the peak ion-temperature almost exponentially increase, while the radiation energy and the peak plasma density change only a little. The main effect of shortening drive current rise-time is to enhance compression of plasma, and the effect of flattening initial load density distribution in the radial direction is to raise the plasma temperature. Both of the approaches elevate the x-ray peak radiation power

Stability Analysis for a Planar Parallel Manipulator with the Capability of Self-Coordinating the Load Distribution

Redundantly actuated parallel manipulators have the advantage of enhancing load-carrying capability over their non-redundant ones, however they also cause the problem of uneven load distribution and need a high requirement for the control system. This paper presents a 2-RPR/RP planar redundantly actuated parallel manipulator which can self-coordinate the distribution of external loads. This capability is realized by an appropriate design of the moving platform to make the manipulator stable at equilibrium position. The stability is proved by the theorem of direct Lyapunov method in classical mechanics. The numerical simulations are conducted to validate the stable capability by means of the observation of potential energies and phase planes. This paper offers an alternative way to design a redundantly actuated manipulator with the capability of self-coordinating the load distribution to actuations, such that parts of the controlling work are assigned to the manipulator itself by its own structure and only a little work remains to the control system.

Cascading failures of overload behaviors using a new coupled network model between edges

With the development of network science,the coupling between networks has become the focus of complex network research.However,previous studies mainly focused on the coupling between nodes,while ignored the coupling between edges.We propose a novel cascading failure model of two-layer networks.The model considers the different loads and capacities of edges,as well as the elastic and coupling relationship between edges.In addition,a more flexible load-capacity strategy is adopted to verify the model.The simulation results show that the model is feasible.Different networks have different behaviors for the same parameters.By changing the load parameters,capacity parameters,overload parameters,and distribution parameters reasonably,the robustness of the model can be significantly improved.

An Improved Differential Evolution Whale Algorithm for Economic Load Distribution

An improved optimization algorithm combining the differential evolution algorithm and the whale algorithm is proposed for the problem of not being able to get rid of the local optimum in the economic load distribution algorithm. The algorithm adopts a nonlinear convergence strategy, a crossover strategy of differential evolution and the introduction of an elimination mechanism, which balances the global search and local exploitation ability of the algorithm and improves the accuracy of the solved optimal solution. The 13-unit and 40-unit systems are selected for economic load distribution calculation, and the experimental results show that the proposed improved algorithm is superior in distributing the economic load of the power system and can effectively reduce the economic cost.

STUDY ON LOADS AND CONTACT STRESSES FOR TOROIDAL DRIVE

The load distribution and calculating formulae of the contact stresses in the rotor worm and stator helical surface for toroidal drive are given. The effecting factors on contact stresses and their effects are analyzed. The results is useful for reference purposes in manufacture and design of the drive.

The research of load spectrum between flexible gear and wave generator of harmonic drive

The harmonic drive is a kind of gear transmission that uses wave generator to produce controllable soft round elastic deformation and engages with rigid gear to transmit motion and power. The load distribution on the surface of the flexible gear and wave generator is an important parameter of studying the deformation of flexible gear and flexible bearing outside the wave generator and is also a necessary condition for studying the fatigue damage of flexible gear under alternating load. In this paper, a 3D model of 32-type 80：1 harmonic drive is build. Based on the generalized Hooke law, a hypothesis of load distribution which is proved to be validity by using finite element simulation is proposed on the interface of flexible gear and wave generator. On this base, the mathematic model and the quantitative calculation formula of the load distribution on the surface of the flexible gear and wave generator are proposed which provide a basis for the dynamic analysis and the fatigue damage of harmonic gear drive.

INFLUENCE OF THREAD PITCH ON LOAD DISTRIBUTION ON THREADED END OF PRESSURE CYLINDER

One of the design methods for closing the end of a pressure cylinder is to screw down a screw plug on the threaded end of the cylinder. In this case, there is the problem of stress concentration in the threaded end of the pressure cylinder. To solve the problem, it is necessary to know accurately the load distribution on the threaded end of the cylinder. To find the load distribution on the threaded end of the pressure cylinder engaged with the screw plug, the following experiments are carried out. Applying the tensile load between the screw plug and the pressure cylinder and regarding the situation above as equivalent to the situation in which the internal pressure is applied, the load distribution is measured with the strain gauge. The influence of thread pitch on the load distribution on the threaded end of the cylinder is presented and an optimum pitch for design is discussed.

An optimization-oriented modeling approach using input convex neural networks and its application on optimal chiller loading

Optimization for the multi-chiller system is an indispensable approach for the operation of highly efficient chiller plants.The optima obtained by model-based optimization algorithms are dependent on precise and solvable objective functions.The classical neural networks cannot provide convex input-output mappings despite capturing impressive nonlinear fitting capabilities,resulting in a reduction in the robustness of model-based optimization.In this paper,we leverage the input convex neural networks(ICNN)to identify the chiller model to construct a convex mapping between control variables and the objective function,which enables the NN-based OCL as a convex optimization problem and apply it to multi-chiller optimization for optimal chiller loading(OCL).Approximation performances are evaluated through a four-model comparison based on an experimental data set,and the statistical results show that,on the premise of retaining prior convexities,the proposed model depicts excellent approximation power for the data set,especially the unseen data.Finally,the ICNN model is applied to a typical OCL problem for a multi-chiller system and combined with three types of optimization strategies.Compared with conventional and meta-heuristic methods,the numerical results suggest that the gradient-based BFGS algorithm provides better energy-saving ratios facing consecutive cooling load inputs and an impressive convergence speed.