In order to establish precision model, a software to calculate the strip crown of four-high hot rolling mill was developedby using affecting function method according to the strip crown calculation theory. The effect ...In order to establish precision model, a software to calculate the strip crown of four-high hot rolling mill was developedby using affecting function method according to the strip crown calculation theory. The effect of work roll diameter,unit width rolling load, roll bending force, work roll crown, initial strip crown and reduction, etc, on load distributioneffect rate was simulated by using the software. The results show that the load distribution effect rate increaseswith the increase of strip width, work roll diameter, unit width rolling load, roll bending force, work roll crown,initial strip crown and reduction. Based on the simulation results, base value of load distribution effect rate andfitting coefficients of six power polynomial of load distribution effect rate modification coefficient were determinedconsidering all of the above parameters. A simplified mathematical model for calculating load distribution effect ratewas established.展开更多
Load distribution is a key technology in strip hot rolling process, which influences the coil＇s mierostrueture and performance. Currently, Newton-Raphson algorithm is applied to load distribution of hot tandem mills ...Load distribution is a key technology in strip hot rolling process, which influences the coil＇s mierostrueture and performance. Currently, Newton-Raphson algorithm is applied to load distribution of hot tandem mills in many hot rolling plants and has some serious defects such as having a strict restriction on initial iterative calculation value and requiring coefficient matrix of nonlinear equations to be nonsingular. To eliminate these defects and improve the online performance of the process control computer, Newton descendent numeric algorithm is introduced to this field to widen the initial value range and a new model named error conversion algorithm is put forth to deal with special conditions when the coefficient matrix is singular. Furthermore, considering the characteristics of load distribution, a condition of strip thickness distribution abnormality and corresponding solutions are provided which ensure that rolling parameters can be calculated normally. Simulation results show that the improved algorithm has overcome the defects of the Newton-Raphson algorithm and is suitable for online application.展开更多
Because the structure of the classical mathematical model of rolling load is simple, even with the self-adapting technology, it is difficult to accommodate the increasing dimensional accuracy. Motivated by this fact, ...Because the structure of the classical mathematical model of rolling load is simple, even with the self-adapting technology, it is difficult to accommodate the increasing dimensional accuracy. Motivated by this fact, an Innovations Feedback Neural Networks （IFNN） was presented based on the idea of Kalman prediction. The neural networks used the Back Propagation （BP） algorithm and applied it to the prediction of rolling load in hot strip mill. The theoretical results and the off-line simulation show that the prediction capability of IFNN is better than that of normal BP networks, namely, for the prediction of the rolling load in hot strip mill, the prediction precision of IFNN is higher than that of normal BP networks. Finally, a relative complete rolling load prediction system was developed on Windows 2003/XP platform using the OOP programming method and the SQL server2000 database. With this sys- tem, the rolling load of a 1700 strip mill was calculated, and the prediction results obtained correspond well with the field data. It shows that IFNN is valid for rolling load prediction.展开更多
Load distribution is a key technology in hot strip rolling process, which directly influences strip product quality. A multi-objective load distribution model, which takes into account the rolling force margin balance...Load distribution is a key technology in hot strip rolling process, which directly influences strip product quality. A multi-objective load distribution model, which takes into account the rolling force margin balance, roll wear ratio and strip shape control, is presented. To avoid the selection of weight coefficients encountered in single objective optimization, a multi-objective differential evolutionary algorithm, called MaximinDE, is proposed to solve this model. The experimental results based on practical production data indicate that MaximinDE can obtain a good pareto-optimal solution set, which consists of a series of alternative solutions to load distribution. Decision-makers can select a trade-off solution from the pareto-optimal solution set based on their experience or the importance of ob- iectives. In comparison with the empirical load distribution solution, the trade-off solution can achieve a better per- formance, which demonstrates the effectiveness of the multi-objective load distribution optimization. Moreover, the conflicting relationship among different objectives can be also found, which is another advantage of multi-objective load distribution optimization.展开更多
Abstract： In the hot strip rolling control system, the temperature distribution and deformation resistance are the main parameters affecting prediction of rolling force. In order to improve the model prediction preci...Abstract： In the hot strip rolling control system, the temperature distribution and deformation resistance are the main parameters affecting prediction of rolling force. In order to improve the model prediction precision, an optimiza- tion algorithm based on objective function was put forward, in which the penalty function index was adopted. During the adaptation process, the temperature distribution and deformation resistance were taken as the optimized parame ters, and the Nelder-Mead simplex algorithm was used to search the optimal solution of the objective function. Fur thermore, the temperature adaptation and force adaptation were solved simultaneously. Application results show that the method can improve the accuracy of the rolling force model obviously, and it can meet the demand of the indus trial production and has a good application prospect.展开更多
为了实现热连轧精轧机组负荷分配的在线优化设定,提出一种轧制力成比例负荷分配的新算法CLAD算法(change load ratio by adjusting draft).其要点是通过调整压下量的偏差来使当前轧制力与目标轧制力的偏差最小化.根据轧制力成比例原则...为了实现热连轧精轧机组负荷分配的在线优化设定,提出一种轧制力成比例负荷分配的新算法CLAD算法(change load ratio by adjusting draft).其要点是通过调整压下量的偏差来使当前轧制力与目标轧制力的偏差最小化.根据轧制力成比例原则建立非线性方程组,结合假设条件,将系数矩阵简化为对角阵,经数学推导给出了新算法的迭代公式和收敛条件.提出一种经验插值法确定初始值,使得负荷分配迭代计算能快速收敛.对宝钢典型轧制案例的模拟计算验证了新算法具有计算速度快、收敛性好等优点,可用于在线计算.展开更多
基金This study was financially supported by the National Natural Science Foundation of China under the contract No.59995440the State Key Development Programming on Foundamental Research under the contract No.G2000067208-4the Natural Science Foundation of Liaoning Province under the contract No.2001101021.
文摘In order to establish precision model, a software to calculate the strip crown of four-high hot rolling mill was developedby using affecting function method according to the strip crown calculation theory. The effect of work roll diameter,unit width rolling load, roll bending force, work roll crown, initial strip crown and reduction, etc, on load distributioneffect rate was simulated by using the software. The results show that the load distribution effect rate increaseswith the increase of strip width, work roll diameter, unit width rolling load, roll bending force, work roll crown,initial strip crown and reduction. Based on the simulation results, base value of load distribution effect rate andfitting coefficients of six power polynomial of load distribution effect rate modification coefficient were determinedconsidering all of the above parameters. A simplified mathematical model for calculating load distribution effect ratewas established.
基金Item Sponsored by National Natural Science Foundation of China (50504007)
文摘Load distribution is a key technology in strip hot rolling process, which influences the coil＇s mierostrueture and performance. Currently, Newton-Raphson algorithm is applied to load distribution of hot tandem mills in many hot rolling plants and has some serious defects such as having a strict restriction on initial iterative calculation value and requiring coefficient matrix of nonlinear equations to be nonsingular. To eliminate these defects and improve the online performance of the process control computer, Newton descendent numeric algorithm is introduced to this field to widen the initial value range and a new model named error conversion algorithm is put forth to deal with special conditions when the coefficient matrix is singular. Furthermore, considering the characteristics of load distribution, a condition of strip thickness distribution abnormality and corresponding solutions are provided which ensure that rolling parameters can be calculated normally. Simulation results show that the improved algorithm has overcome the defects of the Newton-Raphson algorithm and is suitable for online application.
基金Item Sponsored by National Natural Science Foundation of China (60573172)Doctoral Startup Foundation of Liaoning Province of China (20031069)
文摘Because the structure of the classical mathematical model of rolling load is simple, even with the self-adapting technology, it is difficult to accommodate the increasing dimensional accuracy. Motivated by this fact, an Innovations Feedback Neural Networks （IFNN） was presented based on the idea of Kalman prediction. The neural networks used the Back Propagation （BP） algorithm and applied it to the prediction of rolling load in hot strip mill. The theoretical results and the off-line simulation show that the prediction capability of IFNN is better than that of normal BP networks, namely, for the prediction of the rolling load in hot strip mill, the prediction precision of IFNN is higher than that of normal BP networks. Finally, a relative complete rolling load prediction system was developed on Windows 2003/XP platform using the OOP programming method and the SQL server2000 database. With this sys- tem, the rolling load of a 1700 strip mill was calculated, and the prediction results obtained correspond well with the field data. It shows that IFNN is valid for rolling load prediction.
基金Item Sponsored by National Natural Science Foundation of China(50974039)
文摘Load distribution is a key technology in hot strip rolling process, which directly influences strip product quality. A multi-objective load distribution model, which takes into account the rolling force margin balance, roll wear ratio and strip shape control, is presented. To avoid the selection of weight coefficients encountered in single objective optimization, a multi-objective differential evolutionary algorithm, called MaximinDE, is proposed to solve this model. The experimental results based on practical production data indicate that MaximinDE can obtain a good pareto-optimal solution set, which consists of a series of alternative solutions to load distribution. Decision-makers can select a trade-off solution from the pareto-optimal solution set based on their experience or the importance of ob- iectives. In comparison with the empirical load distribution solution, the trade-off solution can achieve a better per- formance, which demonstrates the effectiveness of the multi-objective load distribution optimization. Moreover, the conflicting relationship among different objectives can be also found, which is another advantage of multi-objective load distribution optimization.
基金Sponsored by National Natural Science Foundation of China(51074051)The Fundamental Research Funds for the CentralUniversities of China(N110307001)
文摘Abstract： In the hot strip rolling control system, the temperature distribution and deformation resistance are the main parameters affecting prediction of rolling force. In order to improve the model prediction precision, an optimiza- tion algorithm based on objective function was put forward, in which the penalty function index was adopted. During the adaptation process, the temperature distribution and deformation resistance were taken as the optimized parame ters, and the Nelder-Mead simplex algorithm was used to search the optimal solution of the objective function. Fur thermore, the temperature adaptation and force adaptation were solved simultaneously. Application results show that the method can improve the accuracy of the rolling force model obviously, and it can meet the demand of the indus trial production and has a good application prospect.
文摘为了实现热连轧精轧机组负荷分配的在线优化设定,提出一种轧制力成比例负荷分配的新算法CLAD算法(change load ratio by adjusting draft).其要点是通过调整压下量的偏差来使当前轧制力与目标轧制力的偏差最小化.根据轧制力成比例原则建立非线性方程组,结合假设条件,将系数矩阵简化为对角阵,经数学推导给出了新算法的迭代公式和收敛条件.提出一种经验插值法确定初始值,使得负荷分配迭代计算能快速收敛.对宝钢典型轧制案例的模拟计算验证了新算法具有计算速度快、收敛性好等优点,可用于在线计算.
