DYNAMIC STRESS INTENSITY FACTORS AROUND TWO CRACKS NEAR AN INTERFACE OF TWO DISSIMILAR ELASTIC HALF－PLANES UNDER IN－PLANE SHEAR IMPACT LOAD

Transient stresses around two collinear cracks which lie in parallel with theinterface of the two dissimilar half-planes are studied in this article.The surfaces ofthe cracks are sheared suddenly. Application of the Fourier and Laplace transforms technique reduces the problem to that of solving dual integrai equations.To solvethese,the differences of.the crack surface displacements are expanded in a series offunctions which are automatically zero outside of the cracks. The unknown coefficients accompanied in the series are determined by the Schmidt method. The stress intensity .factors are defined in the Laplace transform domain and these are inverted numerically in the physical space .As an example ,the dynamic stress intensity factors around two cracks in a ceramic and steel bonded composite are numerically calculated.

THE THREE-DIMENSIONAL STRESS INTENSITY FACTOR UNDER MOVING LOADS ON THE CRACK FACES

The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body,with the crack faces subjected to a traction distribution consisting of two pairs of combined mode point loads that move in a direction perpendicular to the crack edge is considered.The analytic expression for the combined mode stress intensity factors as a function of time for any point along the crack edge is obtained.The method of solution is based on the application of integral transform together with the Wiener-Hopf technique and the Cagniard-de Hoop method. Some features of the solution are discussed and graphical results for various point load speeds are presented.

Dynamic behavior of single-layer latticed cylindrical shells subjected to seismic loading

The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.

Interval uncertain optimization for damping fluctuation of a segmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer(EMB)caused by high velocity under intensive impact load and the difficulty and error of machining composite thin-walled long tube,a segmented EMB is proposed.The inner tube and air-gap are divided into initial segments and the traversing segments.Through theoretical analysis,impact test and simulation,it can be found that the RRF curve has two peaks.Firstly,in order to reduce the resultant resistance force(RRF)peaks,the sensitivity analysis based on optimal Latin hypercube design(OLHD)and polynomial regression was performed.The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube,which are less than 1%.Then,fully considering the uncertain factors,important parameters are selected for uncertain optimization after sensitivity analysis.The interval order and interval probability degree methods are used to establish interval uncertain optimization model of the RRF considering robustness.The model was solved using an interval nested optimization method based on radial basis function(RBF)neural network.Finally,the Pareto front is obtained and numerical simulation is performed to verify the optimal value.It indicates that the two kinds of RRF peak is obviously reduced,and the optimization object and strategy are effective.

Complex of general seismic zoning maps OSR-2017 of Uzbekistan

The quantitative assessment of seismic hazard of Uzbekistan has been examined,and new maps of seismic zoning has been developed.Quasihomogeneous seismological areas and seism-generating zones are considered as seismic sources,based on the analysis of seismotectonic data.The seismological parametrization of seismic sources has been carried out,including determination of parameters of earthquake’s reoccurrence for different power levels,seismic potential and a predominant type motion in the source of occurring earthquakes.The reoccurrence parameters of seismic sources were both determined by directly from Gutenberg-Richter dependence law and using summation and distribution methods.Setting were conducted separately for a sample of strong(M≥5)and weak(M<5)earthquakes.The seismic potential Mmax of seismic active zones was determined by seismological and seismotectonic methods.The predominant type of movement in the faulting for each seismic source is reverse fault.Regional regularities of seismic intensity attenuation with distance of different power levels are determined.The seismic hazard is expressed in points of a macro seismic scale,in velocities and accelerations of ground motions,and it is characterized by calculated seismic intensity with the set probability(P=0.9,P=0.95,P=0.98 and P=0.99)not exceed within 50 years in the constructed maps.In seismic zoning map,the seismic intensity was in average soil conditions.The developed complex of maps considers a number of uncertainties of the input parameters in relation to both incompleteness of initial seismological and seismotectonic data,as well the probabilistic nature of seismic process and seismic intensity.The factors of uncertainty of the input parameters are taken into account by constructing a logic tree.The constructed maps of the general seismic zoning are intended for imple menting antiseismic actions in Uzbekistan.

Analysis of composite material interface crack face contact and friction effects using a new node-pairs contact algorithm

A new node-pairs contact algorithm is proposed to deal with a composite material or bi-material interface crack face contact and friction problem （e.g., resistant coating and thermal barrier coatings） subjected to complicated load conditions. To decrease the calculation scale and calculation errors, the local Lagrange multipliers are solved only on a pair of contact nodes using the Jacobi iteration method, and the constraint modification of the tangential multipliers are required. After the calculation of the present node-pairs Lagrange multiplier, it is turned to next contact node-pairs until all node-pairs have finished. Compared with an ordinary contact algorithm, the new local node-pairs contact algorithm is allowed a more precise element on the contact face without the stiffness matrix singularity. The stress intensity factors （SIFs） and the contact region of an infinite plate central crack are calculated and show good agreement with those in the literature. The contact zone near the crack tip as well as its influence on singularity of stress fields are studied. Furthermore, the frictional contacts are also considered and found to have a significant influence on the SIFs. The normalized mode-II stress intensity factors KII for the friction coefficient decrease by 16% when f changes from 1 to 0.

Multiplicative multi-attribute auction based optimal network selection for heterogeneous wireless networks

One of the remarkable features of the next generation network is the integration of heterogeneous wireless networks, which enables mobile users with multi-mode terminals access to the best available network seamlessly. However, most of previous work only takes account of either maximizing single user＇s utility or the whole network＇s payoff, rarely considers the negotiation between them. In this paper, we propose a novel network selection approach using improved multiplicative multi-attribute auction （MMA）. At first, an improved MMA method is put forward to define the user＇s utility. Additionally, user cost is defined by considering allocated bandwidth, network load intensity and cost factor parameter. And last the best suitable network is selected according to the user＇s performance-cost-ration. Simulation results confirm that the proposed scheme outperforms the existing scheme in terms of network selection＇s fairness, user＇s performance-cost-ration, load balancing and the number of accommodated users.