Mathematical Morphology-Based Artificial Technique for Renewable Power Application

This paper suggests a combined novel control strategy for DFIG based wind power systems(WPS)under both nonlinear and unbalanced load conditions.The combined control approach is designed by coordinating the machine side converter(MSC)and the load side converter(LSC)control approaches.The proposed MSC control approach is designed by using a model predictive control(MPC)approach to generate appropriate real and reactive power.The MSC controller selects an appropriate rotor voltage vector by using a minimized optimization cost function for the converter operation.It shows its superiority by eliminating the requirement of transformation,switching table,and the PWM techniques.The proposed MSC reduces the cost,complexity,and computational burden of the WPS.On the other hand,the LSC control approach is designed by using a mathematical morphological technique(MMT)for appropriate DC component extraction.Due to the appropriate DC-component extraction,the WPS can compensate the harmonics during both steady and dynamic states.Further,the LSC controller also provides active power filter operation even under the shutdown of WPS condition.To verify the applicability of coordinated control operation,the WPS-based microgrid system is tested under various test conditions.The proposed WPS is designed by using a MATLAB/Simulink software.

Comparative Study of the Thermal Comfort of Four Materials Type Used in the Construction of a Building

This research work consisted in making a comparative study of the thermal comfort of four materials types used in the construction of a building.A simulation of the building with the various materials on the KoZiBu software in reference and optimized situation was carried out.A study on the sensitive and air-conditioning loads as well as the curves of temperatures on a building of type F2 in situation of reference and in optimized situation was made on the one hand and the other hand a study on the same building without air-conditioning in reference and optimized situation.Finally,the analysis of the results favorizes the choice of the material having the best thermal comfort.The conclusions of these works show that the material that can give the best comfort and the most economics in terms of energy is the adobe which offers temperatures(301.40K or 28.40°C)and a good indoor thermal environment compared to BLT(blocks of cut laterite),BTC(blocks of compressed earth)and cinder block.Dwellings built with earthen materials offer a better indoor thermal environment than those built with modern construction materials,which are used more and more in the construction of houses in Burkina Faso.

Coordinated Active and Reactive Power Optimization Considering Load Characteristics for Active Distribution Network

Voltage sensitive loads are extremely susceptible to voltage fluctuations,resulting in power system safety issues and economic losses.Due to the load component of voltage sensitive loads being changed at different times,a voltage sensitive load model including the time characteristics is proposed.To improve the voltage distribution in the active distribution network(ADN),the linearized active and reactive power coordinated optimization model for minimizing the operational cost(including the fluctuating cost of sensitive loads)is established.Finally,the simulation on the IEEE 33-bus system demonstrates that the proposed control strategy can effectively stabilize the bus voltage of the sensitive load and reduce the operational costs of the ADN.