The essential difference in the formation of conjugate shear zones in brittle and ductile deformation is that the intersection angle between brittle conjugate faults in the contractional quadrants is acute （usually ...The essential difference in the formation of conjugate shear zones in brittle and ductile deformation is that the intersection angle between brittle conjugate faults in the contractional quadrants is acute （usually ～60°） whereas the angle between conjugate ductile shear zones is obtuse （usually 110°）. The Mohr-Coulomb failure criterion, an experimentally validated empirical relationship, is commonly applied for interpreting the stress directions based on the orientation of the brittle shear fractures. However, the Mohr-Coulomb failure criterion fails to explain the formation of the low-angle normal fault, high-angle reverse fault, and the conjugate strike-slip fault with an obtuse angle in the ~1 direction. Although it is ten years since the Maximum-Effective-Moment （MEM） criterion was first proposed, and increasingly solid evidence in support of it has been obtained from both observed examples in nature and laboratory experiments, it is not yet a commonly accepted model to use to interpret these anti- Mohr-Coulomb features that are widely observed in the natural world. The deformational behavior of rock depends on its intrinsic mechanical properties and external factors such as applied stresses, strain rates, and temperature conditions related to crustal depths. The occurrence of conjugate shear features with obtuse angles of -110~ in the contractional direction on different scales and at different crustal levels are consistent with the prediction of the MEM criterion, therefore -110° is a reliable indicator for deformation localization that occurred at medium-low strain rates at any crustal levels. Since the strain-rate is variable through time in nature, brittle, ductile, and plastic features may appear within the same rock.展开更多
Fault rockburst is treated as a strain localization problem under dynamicloading condition considering strain gradient and strain rate. As a kind of dynamic fracturephenomena, rockburst has characteristics of strain l...Fault rockburst is treated as a strain localization problem under dynamicloading condition considering strain gradient and strain rate. As a kind of dynamic fracturephenomena, rockburst has characteristics of strain localization, which is considered as aone-dimensional shear problem subjected to normal compressive stress and tangential shear stress.The constitutive relation of rock material is bilinear (elastic and strain softening) and sensitiveto shear strain rate. The solutions proposed based on gradient-dependent plasticity show thatintense plastic strain is concentrated in fault band and the thickness of the band depends on thecharacteristic length of rock material. The post-peak stiffness of the fault band was determinedaccording to the constitutive parameters of rock material and shear strain rate. Fault bandundergoing strain softening and elastic rock mass outside the band constitute a system and theinstability criterion of the system was proposed based on energy theory. The criterion depends onthe constitutive relation of rock material, the structural size and the strain rate. The staticresult regardless of the strain rate is the special case of the present analytical solution. Highstrain rate can lead to instability of the system.展开更多
Based on the Bayesian information criterion, this paper proposes the improved local linear prediction method to predict chaotic time series. This method uses spatial correlation and temporal correlation simultaneously...Based on the Bayesian information criterion, this paper proposes the improved local linear prediction method to predict chaotic time series. This method uses spatial correlation and temporal correlation simultaneously. Simulation results show that the improved local linear prediction method can effectively make multi-step and one-step prediction of chaotic time series and the multi-step prediction performance and one-step prediction accuracy of the improved local linear prediction method are superior to those of the traditional local linear prediction method.展开更多
With the development of imaging and localization studies,focused parathyroidectomy with use of intraope-rative parathormone monitoring(IPM)is the mainstay of treatment for primary hyperparathyroidism at many health ca...With the development of imaging and localization studies,focused parathyroidectomy with use of intraope-rative parathormone monitoring(IPM)is the mainstay of treatment for primary hyperparathyroidism at many health care centers both nationally and internationally.Focused parathyroidectomy guided by IPM allows for surgical excision of the offending parathyroid gland through smaller incisions.The Miami criterion is a protocol that uses a">50%parathormone(PTH)drop"from either the greatest pre-incision or pre-excision measurement of PTH in a blood sample taken 10 min following resection of hyperfunctioning glands.Following removal of the hyperfunctioning parathyroid gland,a>50%PTH drop at 10 min indicates completion of parathyroidectomy,and predicts operative success at6 mo.IPM using the Miami criterion has demonstrated equal curative rates of>97%,which is comparable to the traditional bilateral neck exploration.The focused approach,however,is associated with shorter recovery times,improved cosmesis,and lower risk of postoperative hypocalcemia.展开更多
A mechanical model is proposed for the system of elastic beam and strain-softening pillar where strain localization is initiated at peak shear stress. To obtain the plastic deformation of the pillar due to the shear s...A mechanical model is proposed for the system of elastic beam and strain-softening pillar where strain localization is initiated at peak shear stress. To obtain the plastic deformation of the pillar due to the shear slips of multiple shear bands, the pillar is divided into several narrow slices where compressive deformation is treated as uniformity. In the light of the compatibility condition of deformation, the total compressive displacement of the pillar is equal to the displacement of the beam in the middle span. An instability criterion is derived analytically based on the energy principle using a known size of localization band according to gradient dependent plasticity. The main advantage of the present model is that the effects of the constitutive parameters of rock and the geometrical size of structure are reflected in the criterion. The condition that the derivative of distributed load with respect to the deflection of the beam in the middle span is less than zero is not only equivalent to, but also even more concise in form than the instability criterion. To study the influences of constitutive parameters and geometrical size on stability, some examples are presented.展开更多
针对局部均值分解方法(Local mean decomposition,LMD)的乘积函数(Product function,PF)判据问题,根据乘积函数具有正交性的特点,将正交性判据(Orthogonality criterion,OC)引入了LMD方法。即将每次迭代后的OC值与预先确定的阈值进行比...针对局部均值分解方法(Local mean decomposition,LMD)的乘积函数(Product function,PF)判据问题,根据乘积函数具有正交性的特点,将正交性判据(Orthogonality criterion,OC)引入了LMD方法。即将每次迭代后的OC值与预先确定的阈值进行比较,以此来确定乘积函数迭代过程的终止点。通过对仿真信号和实际信号的分析,验证了采用正交性判据确定的乘积函数满足正交性要求,反映了信号内含的物理信息,从而实现了对信号正确的分解。展开更多
基金supported by the National Science Foundation of China (41072071)
文摘The essential difference in the formation of conjugate shear zones in brittle and ductile deformation is that the intersection angle between brittle conjugate faults in the contractional quadrants is acute （usually ～60°） whereas the angle between conjugate ductile shear zones is obtuse （usually 110°）. The Mohr-Coulomb failure criterion, an experimentally validated empirical relationship, is commonly applied for interpreting the stress directions based on the orientation of the brittle shear fractures. However, the Mohr-Coulomb failure criterion fails to explain the formation of the low-angle normal fault, high-angle reverse fault, and the conjugate strike-slip fault with an obtuse angle in the ~1 direction. Although it is ten years since the Maximum-Effective-Moment （MEM） criterion was first proposed, and increasingly solid evidence in support of it has been obtained from both observed examples in nature and laboratory experiments, it is not yet a commonly accepted model to use to interpret these anti- Mohr-Coulomb features that are widely observed in the natural world. The deformational behavior of rock depends on its intrinsic mechanical properties and external factors such as applied stresses, strain rates, and temperature conditions related to crustal depths. The occurrence of conjugate shear features with obtuse angles of -110~ in the contractional direction on different scales and at different crustal levels are consistent with the prediction of the MEM criterion, therefore -110° is a reliable indicator for deformation localization that occurred at medium-low strain rates at any crustal levels. Since the strain-rate is variable through time in nature, brittle, ductile, and plastic features may appear within the same rock.
基金This work was financially supported by the National Natural Science Foundation of China (No.50309004) Liaoning Technical University (No. 02-38).
文摘Fault rockburst is treated as a strain localization problem under dynamicloading condition considering strain gradient and strain rate. As a kind of dynamic fracturephenomena, rockburst has characteristics of strain localization, which is considered as aone-dimensional shear problem subjected to normal compressive stress and tangential shear stress.The constitutive relation of rock material is bilinear (elastic and strain softening) and sensitiveto shear strain rate. The solutions proposed based on gradient-dependent plasticity show thatintense plastic strain is concentrated in fault band and the thickness of the band depends on thecharacteristic length of rock material. The post-peak stiffness of the fault band was determinedaccording to the constitutive parameters of rock material and shear strain rate. Fault bandundergoing strain softening and elastic rock mass outside the band constitute a system and theinstability criterion of the system was proposed based on energy theory. The criterion depends onthe constitutive relation of rock material, the structural size and the strain rate. The staticresult regardless of the strain rate is the special case of the present analytical solution. Highstrain rate can lead to instability of the system.
文摘Based on the Bayesian information criterion, this paper proposes the improved local linear prediction method to predict chaotic time series. This method uses spatial correlation and temporal correlation simultaneously. Simulation results show that the improved local linear prediction method can effectively make multi-step and one-step prediction of chaotic time series and the multi-step prediction performance and one-step prediction accuracy of the improved local linear prediction method are superior to those of the traditional local linear prediction method.
文摘With the development of imaging and localization studies,focused parathyroidectomy with use of intraope-rative parathormone monitoring(IPM)is the mainstay of treatment for primary hyperparathyroidism at many health care centers both nationally and internationally.Focused parathyroidectomy guided by IPM allows for surgical excision of the offending parathyroid gland through smaller incisions.The Miami criterion is a protocol that uses a">50%parathormone(PTH)drop"from either the greatest pre-incision or pre-excision measurement of PTH in a blood sample taken 10 min following resection of hyperfunctioning glands.Following removal of the hyperfunctioning parathyroid gland,a>50%PTH drop at 10 min indicates completion of parathyroidectomy,and predicts operative success at6 mo.IPM using the Miami criterion has demonstrated equal curative rates of>97%,which is comparable to the traditional bilateral neck exploration.The focused approach,however,is associated with shorter recovery times,improved cosmesis,and lower risk of postoperative hypocalcemia.
文摘A mechanical model is proposed for the system of elastic beam and strain-softening pillar where strain localization is initiated at peak shear stress. To obtain the plastic deformation of the pillar due to the shear slips of multiple shear bands, the pillar is divided into several narrow slices where compressive deformation is treated as uniformity. In the light of the compatibility condition of deformation, the total compressive displacement of the pillar is equal to the displacement of the beam in the middle span. An instability criterion is derived analytically based on the energy principle using a known size of localization band according to gradient dependent plasticity. The main advantage of the present model is that the effects of the constitutive parameters of rock and the geometrical size of structure are reflected in the criterion. The condition that the derivative of distributed load with respect to the deflection of the beam in the middle span is less than zero is not only equivalent to, but also even more concise in form than the instability criterion. To study the influences of constitutive parameters and geometrical size on stability, some examples are presented.
文摘频域反射法(frequency domain reflectometry,FDR)是目前电缆缺陷定位的有效方法之一。针对传统FDR的缺陷定位效果受窗函数和干扰项影响大的问题,该文提出一种基于子空间分解的电缆缺陷定位方法,该方法不需要选择窗函数,并且滤除了干扰信号的子空间,因此拥有更好的缺陷定位效果。首先,利用传输线理论研究电缆的反射系数谱,证实了反射系数谱可用于定位电缆缺陷。然后,介绍了子空间分解技术、改进的贝叶斯信息准则(Bayesian information criterion,BIC)及基于密度聚类算法的原理,通过估计反射系数谱中各复指数衰减振荡函数的参数,并滤除相关干扰,提出了新的电缆缺陷定位谱图。最后,根据所提方法,对200m仿真电缆模型与500m真实电缆开展缺陷定位。结果表明,该定位谱图可准确地定位电缆中缺陷,并且干扰项较少,较大程度地提高FDR方法对电缆缺陷的定位正确率。
文摘针对局部均值分解方法(Local mean decomposition,LMD)的乘积函数(Product function,PF)判据问题,根据乘积函数具有正交性的特点,将正交性判据(Orthogonality criterion,OC)引入了LMD方法。即将每次迭代后的OC值与预先确定的阈值进行比较,以此来确定乘积函数迭代过程的终止点。通过对仿真信号和实际信号的分析,验证了采用正交性判据确定的乘积函数满足正交性要求,反映了信号内含的物理信息,从而实现了对信号正确的分解。
