Two-person device-free localization system based on ZigBee and transformer

Most studies on device-free localization currently focus on single-person scenarios.This paper proposes a novel method for device-free localization that utilizes ZigBee received signal strength indication(RSSI)and a Transformer network structure.The method aims to address the limited research and low accuracy of two-person device-free localization.This paper first describes the construction of the sensor network used for collecting ZigBee RSSI.It then examines the format and features of ZigBee data packages.The algorithm design of this paper is then introduced.The box plot method is used to identify abnormal data points,and a neural network is used to establish the mapping model between ZigBee RSSI matrix and localization coordinates.This neural network includes a Transformer encoder layer as the encoder and a fully connected network as the decoder.The proposed method's classification accuracy was experimentally tested in an online test stage,resulting in an accuracy rate of 98.79%.In conclusion,the proposed two-person localization system is novel and has demonstrated high accuracy.

Hybrid ToA and IMU indoor localization system by various algorithms

In this paper, we integrate inertial navigation system (INS) with wireless sensor network (WSN) to enhance the accuracy of indoor localization. Inertial measurement unit (IMU), the core of the INS, measures the accelerated and angular rotated speed of moving objects. Meanwhile, the ranges from the object to beacons, which are sensor nodes with known coordinates, are collected by time of arrival (ToA) approach. These messages are simultaneously collected and transmitted to the terminal. At the terminal, we set up the state transition models and observation models. According to them, several recursive Bayesian algorithms are applied to producing position estimations. As shown in the experiments, all of three algorithms do not require constant moving speed and perform better than standalone ToA system or standalone IMU system. And within them, two algorithms can be applied for the tracking on any path which is not restricted by the requirement that the trajectory between the positions at two consecutive time steps is a straight line.

RSS-Based Indoor Localization System with Single Base Station

The paper proposes an Indoor Localization System(ILS)which uses only one fixed Base Station(BS)with simple non-reconfigurable antennas.The proposed algorithm measures Received Signal Strength(RSS)and maps it to the location in the room by estimating signal strength of a direct line of sight(LOS)signal and signal of the first order reflection from the wall.The algorithm is evaluated through both simulations and empirical measurements in a furnished open space office,sampling 21 different locations in the room.It is demonstrated the system can identify user’s real-time location with a maximum estimation error below 0.7 m for 80%confidence Cumulative Distribution Function(CDF)user level,demonstrating the ability to accurately estimate the receiver’s location within the room.The system is intended as a cost-efficient indoor localization technique,offering simplicity and easy integration with existing wireless communication systems.Unlike comparable single base station localization techniques,the proposed system does not require beam scanning,offering stable communication capacity while performing the localization process.

Accuracy and Electromagnetic Safety Evaluation of a Portable Electromagnetic Localization System for Micro Invasive Medical Devices in Vivo

Aiming at localizing the telemetric capsule for detecting gastrointestinal physiological parameters in vivo accurately,a portable alternating current(AC)electromagnetic localization system is designed.To verify the feasibility of the method,the model and construction of the localization system are detailed.And static and dynamic accuracy of the localization system are tested by experiments.Next,we compare the simulating results of the electromagnetic radiation aroused by the localization system with the electromagnetic safety standards of human(ICNIRP guidelines and IEEE standard C95.1-1991).Finally,in terms of the results of the static and dynamic experiments,conclusions are drawn that the accuracy of portable positioning system is high(less than 10 mm)enough to satisfy the localization need of the micro invasive medical devices in vivo,and there is no harm of electromagnetic radiation to human.

Comparison of Indoor Localization Systems Based on Wireless Communications

Localization using a Wireless Sensor Network (WSN) has become a field of interest for researchers in the past years. This information is expected to aid in routing, systems maintenance and health monitoring. For example, many projects aiming to monitor the elderly at home include a personal area network (PAN) which can provide current location of the patient to the medical staff. This article presents an overview of the current trends in this domain. We introduce the mathematical tools used to determine position then we introduce a selection of range-free and range-based proposals. Finally, we provide a comparison of these techniques and suggest possible areas of improvement.

An Image Localization System Based on Single Photon

As an essential part of artificial intelligence,many works focus on image processing which is the branch of computer vision.Nevertheless,image localization faces complex challenges in image processing with image data increases.At the same time,quantum computing has the unique advantages of improving computing power and reducing energy consumption.So,combining the advantage of quantum computing is necessary for studying the quantum image localization algorithms.At present,many quantum image localization algorithms have been proposed,and their efficiency is theoretically higher than the corresponding classical algorithms.But,in quantum computing experiments,quantum gates in quantum computing hardware need to work at very low temperatures,which brings great challenges to experiments.This paper proposes a single-photon-based quantum image localization algorithm based on the fundamental theory of single-photon image classification.This scheme realizes the operation of the mixed national institute of standards and technology database(MNIST)quantum image localization by a learned transformation for non-noise condition,noisy condition,and environmental attack condition,respectively.Compared with the regular use of entanglement between multi-qubits and low-temperature noise reduction conditions for image localization,the advantage of this method is that it does not deliberately require low temperature and entanglement resources,and it improves the lower bound of the localization success rate.This method paves a way to study quantum computer vision.

Development of an Accurate Low-cost Ultrasonic Localization System for Autonomous Mobile Robots in Indoor Environments

An accurate low-cost ultrasonic localization system is de- veloped for automated mobile robots in indoor environments, which is essential for automatic navigation of mobile robots with various tasks. Although ultrasenic sensors are more cost-effective than other sensors such as Laser Range Finder （LRF） and vision, but they are inaccurate and directionally ambiguons. First, the matched filter is used to measure the distance accurately. For resolving the computational complexity of the matched filter, a new matched filter algorithm with simple compution is proposed. Then, an ultrasonic localization system is proposed which consists of three ultrasonic receivers and two or mote transmitters for improving position and orientation accuracy was developed. Finally, an extended Kalman filter is designed to estimate both the static and dynamic positions and orientations. Various simu lations and experimental results show that the proposed system is effective.

Influence of Synchronization Impairments on an Experimental TDOA/FDOA Localization System

In Electronic Warfare, and more specifically in the domain of passive localization, accurate time synchronization between platforms is decisive, especially on systems relying on TDOA （time difference of arrival） and FDOA （frequency difference of arrival）. This paper investigates this issue by presenting an analysis in terms of final localization performance of an experimental passive localization system based on off-the-shelf components. This system is detailed, as well as the methodology used to carry out the acquisition of real data. This experiment has been realized with two different kinds of clock. The results are analyzed by calculating the Allan deviation and time deviation. The choice of these metrics is explained and their properties are discussed in the scope of an airborne bi-platform passive localization context. Conclusions are drawn regarding the overall localization performance of the system.

Dynamical localization in a non-Hermitian Floquet synthetic system

We investigate the non-Hermitian effects on quantum diffusion in a kicked rotor model where the complex kicking potential is quasi-periodically modulated in the time domain.The synthetic space with arbitrary dimension can be created by incorporating incommensurate frequencies in the quasi-periodical modulation.In the Hermitian case,strong kicking induces the chaotic diffusion in the four-dimension momentum space characterized by linear growth of mean energy.We find that the quantum coherence in deep non-Hermitian regime can effectively suppress the chaotic diffusion and hence result in the emergence of dynamical localization.Moreover,the extent of dynamical localization is dramatically enhanced by increasing the non-Hermitian parameter.Interestingly,the quasi-energies become complex when the non-Hermitian parameter exceeds a certain threshold value.The quantum state will finally evolve to a quasi-eigenstate for which the imaginary part of its quasi-energy is large most.The exponential localization length decreases with the increase of the non-Hermitian parameter,unveiling the underlying mechanism of the enhancement of the dynamical localization by nonHermiticity.

An efficient transient gene expression system for protein subcellular localization assay and genome editing in citrus protoplasts

Protoplast has been widely used in biotechnologies to circumvent the breeding obstacles in citrus, including long juvenility, polyembryony, and male/female sterility. The protoplast-based transient gene expression system is a powerful tool for gene functional characterization and CRISPR/Cas9 genome editing in higher plants, but it has not been widely used in citrus. In this study, the polyethylene glycol(PEG)-mediated method was optimized for citrus callus protoplast transfection, with an improved transfection efficiency of 68.4%. Consequently, the efficiency of protein subcellular localization assay was increased to 65.8%, through transient expression of the target gene in protoplasts that stably express the fluorescent organelle marker protein. The gene editing frequencies in citrus callus protoplasts reached 14.2% after transient expression of CRISPR/Cas9 constructs. We demonstrated that the intronic polycistronic tRNAgRNA(inPTG) genome editing construct was functional in both the protoplast transient expression system and epicotyl stable transformation system in citrus. With this optimized protoplast transient expression system, we improved the efficiency of protein subcellular localization assay and developed the genome editing system in callus protoplasts, which provides an approach for prompt test of CRISPR vectors.

Deep brain implantable microelectrode arrays for detection and functional localization of the subthalamic nucleus in rats with Parkinson’s disease

The subthalamic nucleus(STN)is considered the best target for deep brain stimulation treatments of Parkinson’s disease(PD).It is difficult to localize the STN due to its small size and deep location.Multichannel microelectrode arrays(MEAs)can rapidly and precisely locate the STN,which is important for precise stimulation.In this paper,16-channel MEAs modified with multiwalled carbon nanotube/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(MWCNT/PEDOT:PSS)nanocomposites were designed and fabricated,and the accurate and rapid identification of the STN in PD rats was performed using detection sites distributed at different brain depths.These results showed that nuclei in 6-hydroxydopamine hydrobromide(6-OHDA)-lesioned brains discharged more intensely than those in unlesioned brains.In addition,the MEA simultaneously acquired neural signals from both the STN and the upper or lower boundary nuclei of the STN.Moreover,higher values of spike firing rate,spike amplitude,local field potential(LFP)power,and beta oscillations were detected in the STN of the 6-OHDA-lesioned brain,and may therefore be biomarkers of STN localization.Compared with the STNs of unlesioned brains,the power spectral density of spikes and LFPs synchronously decreased in the delta band and increased in the beta band of 6-OHDA-lesioned brains.This may be a cause of sleep and motor disorders associated with PD.Overall,this work describes a new cellular-level localization and detection method and provides a tool for future studies of deep brain nuclei.

A Novel RFID Localization Approach to Smart Self-Service Borrowing and Returning System

The misreading problem of a passive ultra-high-frequency(UHF)radio frequency identification(RFID)tag is a frequent problem arising in the field of librarianship.Unfortunately,existing solutions are something inefficient,e.g.,extra resource requirement,inaccuracy,and empiricism.To this end,under comprehensive analysis on the passive UHF RFID application in the librarianship scenario,a novel and judicious approach based on RFID localization is proposed to address such a misreading problem.Extensive simulation results show that the proposed approach can outperform the existing ones and can be an attractive candidate in practice.

Infrastructure-Based Vehicle Localization System for Indoor Parking Lots Using RGB-D Cameras

Accurate vehicle localization is a key technology for autonomous driving tasks in indoor parking lots,such as automated valet parking.Additionally,infrastructure-based cooperative driving systems have become a means to realizing intelligent driving.In this paper,we propose a novel and practical vehicle localization system using infrastructure-based RGB-D cameras for indoor parking lots.In the proposed system,we design a depth data preprocessing method with both simplicity and efficiency to reduce the computational burden resulting from a large amount of data.Meanwhile,the hardware synchronization for all cameras in the sensor network is not implemented owing to the disadvantage that it is extremely cumbersome and would significantly reduce the scalability of our system in mass deployments.Hence,to address the problem of data distortion accompanying vehicle motion,we propose a vehicle localization method by performing template point cloud registration in distributed depth data.Finally,a complete hardware system was built to verify the feasibility of our solution in a real-world environment.Experiments in an indoor parking lot demonstrated the effectiveness and accuracy of the proposed vehicle localization system,with a maximum root mean squared error of 5 cm at 15Hz compared with the ground truth.

SNR and RSSI Based an Optimized Machine Learning Based Indoor Localization Approach:Multistory Round Building Scenario over LoRa Network

In situations when the precise position of a machine is unknown,localization becomes crucial.This research focuses on improving the position prediction accuracy over long-range(LoRa)network using an optimized machine learning-based technique.In order to increase the prediction accuracy of the reference point position on the data collected using the fingerprinting method over LoRa technology,this study proposed an optimized machine learning(ML)based algorithm.Received signal strength indicator(RSSI)data from the sensors at different positions was first gathered via an experiment through the LoRa network in a multistory round layout building.The noise factor is also taken into account,and the signal-to-noise ratio(SNR)value is recorded for every RSSI measurement.This study concludes the examination of reference point accuracy with the modified KNN method(MKNN).MKNN was created to more precisely anticipate the position of the reference point.The findings showed that MKNN outperformed other algorithms in terms of accuracy and complexity.

Improved PSO-Extreme Learning Machine Algorithm for Indoor Localization

Wi Fi and fingerprinting localization method have been a hot topic in indoor positioning because of their universality and location-related features.The basic assumption of fingerprinting localization is that the received signal strength indication(RSSI)distance is accord with the location distance.Therefore,how to efficiently match the current RSSI of the user with the RSSI in the fingerprint database is the key to achieve high-accuracy localization.In this paper,a particle swarm optimization-extreme learning machine(PSO-ELM)algorithm is proposed on the basis of the original fingerprinting localization.Firstly,we collect the RSSI of the experimental area to construct the fingerprint database,and the ELM algorithm is applied to the online stages to determine the corresponding relation between the location of the terminal and the RSSI it receives.Secondly,PSO algorithm is used to improve the bias and weight of ELM neural network,and the global optimal results are obtained.Finally,extensive simulation results are presented.It is shown that the proposed algorithm can effectively reduce mean error of localization and improve positioning accuracy when compared with K-Nearest Neighbor(KNN),Kmeans and Back-propagation(BP)algorithms.

A robust triaxial localization method of AE source using refraction path

Acoustic emission(AE)localization algorithms based on homogeneous media or single-velocity are less accurate when applied to the triaxial localization experiments.To the end,a robust triaxial localization method of AE source using refraction path is proposed.Firstly,the control equation of the refraction path is established according to the sensor coordinates and arrival times.Secondly,considering the influence of time-difference-of-arrival(TDOA)errors,the residual of the governing equation is calculated to estimate the equation weight.Thirdly,the refraction points in different directions are solved using Snell’s law and orthogonal constraints.Finally,the source coordinates are iteratively solved by weighted correction terms.The feasibility and accuracy of the proposed method are verified by pencil-lead breaking experiments.The simulation results show that the new method is almost unaffected by the refraction ratio,and always holds more stable and accurate positioning performance than the traditional method under different ratios and scales of TDOA outliers.

Presence of a long nuclear-localization signal sequence in homeodomain transcription factor Nkx 1.2

Homeodomains,a 60-amino acid sequence encoded by 180 nucleotides,are highly conserved DNA-binding motifs that are present in a variety of transcription factors in species ranging from yeast to humans.The NKX proteins belong to the homeodomain(HD)-containing transcription factor family.They play vital roles in the regulation of morphogenesis.NKX1-2 is one member of the NKX subfamily.At present,information about its nuclear localization signal(NLS)sequence is limited.We studied the NLS sequence of zebrafish Nkx1.2 by introducing sequence changes such as deletion,mutation,and truncation,and identified an NLS motif(QNRRTKWKKQ)that is localized at the C-terminus of the homeodomain.Moreover,the deletion of two amino acid residues(RR)in this NLS motif prevents Nkx1.2 from entering the nucleus,indicating that the two amino acids are essential for Nkx1.2 nuclear localization.However,the NLS motif alone is unable to target cytoplasmic protein glutathione S-transferase(GST)to the nucleus.An intact homeodomain is necessary for mediating the complete nuclear transport of cytoplasmic protein.Unlike most nuclear import proteins with short NLS sequences,a long NLS is present in zebrafish Nkx1.2.We also demonstrated that the sequences of homeodomain of NKX1.2 are well conserved among different species.This study is informative to verify the function of the NKX1.2 protein.

Elevating Localization Accuracy in Wireless Sensor Networks:A Refined DV-Hop Approach

Localization is crucial in wireless sensor networks for various applications,such as tracking objects in outdoor environments where GPS(Global Positioning System)or prior installed infrastructure is unavailable.However,traditional techniques involve many anchor nodes,increasing costs and reducing accuracy.Existing solutions do not address the selection of appropriate anchor nodes and selecting localized nodes as assistant anchor nodes for the localization process,which is a critical element in the localization process.Furthermore,an inaccurate average hop distance significantly affects localization accuracy.We propose an improved DV-Hop algorithm based on anchor sets(AS-IDV-Hop)to improve the localization accuracy.Through simulation analysis,we validated that the ASIDV-Hop proposed algorithm is more efficient in minimizing localization errors than existing studies.The ASIDV-Hop algorithm provides an efficient and cost-effective solution for localization in Wireless Sensor Networks.By strategically selecting anchor and assistant anchor nodes and rectifying the average hop distance,AS-IDV-Hop demonstrated superior performance,achieving a mean accuracy of approximately 1.59,which represents about 25.44%,38.28%,and 73.00%improvement over other algorithms,respectively.The estimated localization error is approximately 0.345,highlighting AS-IDV-Hop’s effectiveness.This substantial reduction in localization error underscores the advantages of implementing AS-IDV-Hop,particularly in complex scenarios requiring precise node localization.

Source localization in signed networks with effective distance

While progress has been made in information source localization,it has overlooked the prevalent friend and adversarial relationships in social networks.This paper addresses this gap by focusing on source localization in signed network models.Leveraging the topological characteristics of signed networks and transforming the propagation probability into effective distance,we propose an optimization method for observer selection.Additionally,by using the reverse propagation algorithm we present a method for information source localization in signed networks.Extensive experimental results demonstrate that a higher proportion of positive edges within signed networks contributes to more favorable source localization,and the higher the ratio of propagation rates between positive and negative edges,the more accurate the source localization becomes.Interestingly,this aligns with our observation that,in reality,the number of friends tends to be greater than the number of adversaries,and the likelihood of information propagation among friends is often higher than among adversaries.In addition,the source located at the periphery of the network is not easy to identify.Furthermore,our proposed observer selection method based on effective distance achieves higher operational efficiency and exhibits higher accuracy in information source localization,compared with three strategies for observer selection based on the classical full-order neighbor coverage.

Shock-induced energy localization and reaction growth considering chemical-inclusions effects for crystalline explosives

Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics method.Results indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and concentrations.The atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and jet.As introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final reactions.Adding chemical inclusions can reduce the effectiveness of the void during the shock impacting.Under the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone inclusions.The lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense shockwave.The quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline explosive.RD_(sys)is defined by the density ratio of defective RDX to perfect crystal after dynamics relaxation and reveals the global density characteristic in shocked systems filled with chemical inclusions.When RD_(sys)is below 0.9,local hydrodynamic jet initiated by void collapse dominates upon energy localization instead of interfacial impact.This study sheds light on novel insights for understanding the shock chemistry and physical-based atomic origin in crystalline explosives considering chemical-inclusions effects.