Construction of Two-Region Input-output Model——A Case Study of Henan Province

On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.

Regional Agricultural Input-Output Model and Countermeasure for Production and Income Increase of Farmers in Southern Xinjiang,China

Agricultural input and output status in southern Xinjiang,China is introduced,such as lack of agricultural input,low level of agricultural modernization,excessive fertilizer use,serious damage of environment,shortage of water resources,tremendous pressure on ecological balance,insignificant economic and social benefits of agricultural production in southern Xinjiang,agriculture remaining a weak industry,agricultural economy as the economic subject of southern Xinjiang,and backward economic development of southern Xinjiang.Taking the Aksu area as an example,according to the input and output data in the years 2002-2007,input-output model about regional agriculture of the southern Xinjiang is established by principal component analysis.DPS software is used in the process of solving the model.Then,Eviews software is adopted to revise and test the model in order to analyze and evaluate the economic significance of the results obtained,and to make additional explanations of the relevant model.Since the agricultural economic output is seriously restricted in southern Xinjiang at present,the following countermeasures are put forward,such as adjusting the structure of agricultural land,improving the utilization ratio of land,increasing agricultural input,realizing agricultural modernization,rationally utilizing water resources,maintaining eco-environmental balance,enhancing the awareness of agricultural insurance,minimizing the risk and loss,taking the road of industrialization of characteristic agricultural products,and realizing the transfer of surplus labor force.

Re-measuring Status of China＇s High-Tech Industries in International Division of Labor： Applying a Non-Competitive Input-Output Model

Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the index of＂ weighted value-added productivity ＂ by compiling non-competitive input-output tables which distinguish high-tech industries from traditional industries. The new method effectively avoids ＂statistical illusion＂ which stems from a biased focus on gross exports under intra-product specialization. The empirical study shows that since 1995, the status of China＇s high-tech industries has grown quickly as a result of enhanced labor productivity, but still lags behind those of major developed countries. In addition, the study also suggests that the status of China＇s high-tech industries has been over-estimated using the traditional gross export statistical method.

SOLVABILITY RESULTS OF A CONDITIONAL INPUT-OUTPUT EQUATION BASED ON A TYPE OF NONLINEAR LEONTIEF MODEL

A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.

A Study on the Economic Dislocation in Dynamic input-Output Model

In this paper, we consider the discrete-time dynamic models of input-output whose input-coefficient matrices A. and capital-coefficient matrices Bn can vary with time n. Under certain conditions, we prove that there exists a subspace of nonnegative vectors Ωr such that if initial (input) product , then there is some natural number n0≥0 such that for n≥ n0, the n-th year’sproduct Xn has at least one negative component, which means that economic dislocation occurs.

The Influences of Energy Price Variation on the Prices of Other Industries: A Study Based on Input-Output Price Model

Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.

An input-output model for energy accounting and analysis of industrial production processes： a case study of an integrated steel plant

To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.

INPUT-OUTPUT MODELS OF SCIENCE AND TECHNOLOGY AND ITS APPLICATION IN EVALUATING PROGRESS OF ENTERPRISE SCIENCE AND TECHNOLOGY

The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the models for determining direct,indirect and full contributions of the progress of enterprise science and technology have been set up which can be used to analyse and evaluate the direct,indirect and full benefits of the progress of enterprise science and technology.

A Generalization of the Input-Output Pollution Control Model and Product Selection

The input-output pollution control model given in [1] is generalized. The generalization makes it easier for the model to handle many problem instances. A linear program is used to solve the new model. An example is given to show that the new model can handle classes of problems that the original model cannot handle.

Application of Linear Model Predictive Control and Input-Output Linearization to Constrained Control of 3D Cable Robots

Cable robots are structurally the same as parallel robots but with the basic difference that cables can only pull the platform and cannot push it. This feature makes control of cable robots a lot more challenging compared to parallel robots. This paper introduces a controller for cable robots under force constraint. The controller is based on input-output linearization and linear model predictive control. Performance of input-output linearizing (IOL) controllers suffers due to constraints on input and output variables. This problem is successfully tackled by augmenting IOL controllers with linear model predictive controller (LMPC). The effecttiveness of the proposed method is illustrated by numerical simulation.

The Input-Output Model and the Analysis of Profit and Tax of Product

With the combination of modern quantitative analysis method and enterprise inputoutput model,in this paper we make a scientific analysis on the effect to product profit tax from the change of internal and external important factors of enterprise,and some important results hare been given.

Spatial Heterogeneity of Embedded Water Consumption from the Perspective of Virtual Water Surplus and Deficit in the Yellow River Basin,China

Virtual water trade(VWT)provides a new perspective for alleviating water crisis and has thus attracted widespread attention.However,the heterogeneity of virtual water trade inside and outside the river basin and its influencing factors remains further study.In this study,for better investigating the pattern and heterogeneity of virtual water trade inside and outside provincial regions along the Yellow River Basin in 2015 using the input-output model(MRIO),we proposed two new concepts,i.e.,virtual water surplus and virtual water deficit,and then used the Logarithmic Mean Divisia Index(LMDI)model to identify the inherent mechanism of the imbalance of virtual water trade between provincial regions along the Yellow River Basin and the other four regions in China.The results show that:1)in provincial regions along the Yellow River Basin,the less developed the economy was,the larger the contribution of the agricultural sector in virtual water trade,while the smaller the contribution of the industrial sector.2)Due to the large output of agricultural products,the upstream and midstream provincial regions of the Yellow River Basin had a virtual water surplus,with a net outflow of virtual water of 2.7×10^(8) m^(3) and 0.9×10^(8) m^(3),respectively.3)provincial regions along the Yellow River Basin were in a virtual water deficit with the rest of China,and the decisive factor was the active degree of trade with the outside.This study would be beneficial to illuminate the trade-related water use issues in provincial regions along the Yellow River Basin,which has farreaching practical signific-ance for alleviating water scarcity.

Integrated Water and CGE Model of the Impacts of Water Policy on the Beijing's Economy and Output

The article used general equilibrium model to analyze the change of gross domestic product and industry output affected by water resources policies in Beijing City by using GEMPACK soft tool.The article researches on rules of water supply and demand,evaluating water resources,building water resources input and output table,establishing water computable general equilibrium model and stimulating water policy.The stimulation gives a scenario that increases water price by 10%.The result shows the following aspects.First,water resources policy infects gross domestic product and industry output in different ways.There are different behaviors in different industries as to the water policy. Agriculture industry has the same tendency as water price change and it has more sensitive to water quantity than to water price.For basic energy industries such as oil and chemistry and gas,they show diversity tendency.As to some high water consumer industry such as paper and textile etc.,water resource economic policy can infect them greatly and can promote them to accomplish more water-saving technology.Waste water and construction and service industries show the same tendency as to water policy.Second,government should pay more attention to water resource policy by macro economic administration.The simulation also shows that the output and supply and consumer price change more than expect as to water policy in a free market economic in water industry.So as to a government policy maker,one should be more carefully and prepare suitable forecast and plan to water policy and its negative impact.

TECHNIQUES OF CONSTRUCTING REGIONAL INPUT-OUTPUT TABLES: ACHIEVEMENTS

The development of any analytical method should have to experience at least four stages: its initial status, growth, mature and declining. However, although the regional input-output analysis has been widely applied for more than forty years, it is still one of the most important approach in regional economic analysis and forecast at present in the world. This is due to the never ended modifications and its great potentials. In this paper, we review the historical development of the regional input-output analysis.

GREY DISPLACEMENT INPUT－OUTPUT MODELS OF MINERAL PROCESSING－METALLURGY SYSTEM

ＧＲＥＹＤＩＳＰＬＡＣＥＭＥＮＴＩＮＰＵＴ－ＯＵＴＰＵＴＭＯＤＥＬＳＯＦＭＩＮＥＲＡＬＰＲＯＣＥＳＳＩＮＧ－ＭＥＴＡＬＬＵＲＧＹＳＹＳＴＥＭＨａｎ；ＸｕｌｉＬｉ；Ｓｏｎｇｒｅｎ（ＤｅｐａｒｔｍｅｎｔｏｆＭｉｎｅｒａｌＥｎｇｉｎｅｅｒｉｎｇ，Ｃｅｎｔｒ...

Input-Output Analysis of the Impact of Environmental Regulation on Chinese Industries

In this paper, we attempted to calculate the impact of environmental regulation on the international competitiveness of China＇s industries. Calculations are based on the input-output model that incorporates pollution control costs. We took enterprises ＇pollution control costs as the substitute variable for environmental regulation and price changes to measure the impact on international competitiveness for all sectors. Our studies reported three findings. First, price rises caused by pollution control costs were not more than 4 per cent in the manufacturing and trade sectors in 2007. Second, although the charging rate on pollutant discharge has become increasingly higher since 2003, the resultant price rise is only around O. 5 per cent across all sectors. Third, the impact brought about by increasingly stronger environmental regulation is limited and the resultant price rise does not exceed 2 per cent. Thesefindings indicate that the impact of environmental regulation on China＇s trade sectors is affordable. Therefore, it is needless to worry that environmental regulation will weaken the international competitiveness of Chinese products.

Carbon emission efficiency of forest processing industries in China

This paper uses an input-output table of China's provinces(2007-2016) to measure carbon emissions of these industries.It employs a Malmquist-Luenberger(ML) index with expected and undesired outputs,and an absolute β convergence and a conditional β convergence model,to conduct an in-depth analysis of dynamic changes and spatial convergence.Carbon emission efficiency of forest processing industries in 25 regions,including Shanghai,Chongqing,Zhejiang,and Jiangsu are increasing,whereas those of Tianjin,Liaoning,Heilongjiang,and Tibet are decreasing.The main contributing factors of carbon emission efficiency in three major regions vary over time.Further,carbon emission efficiency in the eastern,central,and western regions all have absolute β convergence and conditional β convergence,indicating that different regions are developing toward their own goals and industry,yet regions with lower efficiency are catching up with those where with more efficient strategies in place.Finally,this paper proposes according recommendations.

基于投入产出法的山东省物流需求分析与预测

采用投入产出分析方法,根据投入产出模型从定量的角度计算出山东省2007年各产业对于物流产业的直接消耗关系。并根据山东省统计年鉴记录,以各产业2000-2009年十年间的产值数据为依据,采用趋势外推法,推算出山东省2013-2020年内各产业产值。对山东省2013-2020年的物流业需求总量以及物流业的发展地位进行分析预测,为山东区域物流的规划建设提供参考,对引导物流业合理投资、减少浪费现象具有一定的指导意义。

Cutting CO_(2)emissions through demand side regulation:Implications from multi-regional input-output linear programming model

This study combines multi-regional inputoutput(MRIO)model with linear programming(LP)model to explore economic structure adjustment strategies for the reduction of carbon dioxide(CO_(2))emissions.A particular feature of this study is the identification of the optimal regulation sequence of final products in various regions to reduce CO_(2)emissions with the minimum loss in gross domestic product(GDP).By using China's MRIO tables 2017 with 28 regions and 42 economic sectors,results show that reduction in final demand leads to simultaneous reductions in GDP and CO_(2)emissions.Nevertheless,certain demand side regulation strategy can be adopted to lower CO_(2)emissions at the smallest loss of economic growth.Several key final products,such as metallurgy,nonmetal,metal,and chemical products,should first be regulated to reduce CO_(2)emissions at the minimum loss in GDP.Most of these key products concentrate in the coastal developed regions in China.The proposed MRIO-LP model considers the inter-relationship among various sectors and regions,and can aid policy makers in designing effective policy for industrial structure adjustment at the regional level to achieve the national environmental and economic targets.

Analysis of the Pull Effect of Local Government Special-Purpose Bond Investment on Economic Growth Under the Input-Output Framework

In this paper,we discuss the development process of local government special bonds,and the role channels of local government special debt investment in driving China’s economic growth.Based on the specific decomposition of Xinjiang local government special bond investment,this paper uses the non-competitive input-output model for the first time to analyze the net pulling effect of Xinjiang local government special bond investment on Xinjiang’s GDP and employment in 2020.Two measure calibers are set in this paper based on whether the financing costs are considered or not;in addition,we set up four scenarios based on two conditions:Whether to consider retained fun and whether to consider using special-purpose bond investment to leverage social capital.The results show that:1)when financing costs are not considered,the RMB77.4 billion local government special-purpose bonds can push the GDP of Xinjiang to grow by RMB42.27 billion,RMB35.12 billion,RMB77.548billion and RMB69.34 billion respectively under the four scenarios;2)when financing costs are not considered,the number of jobs driven by the RMB77.4 billion local government special-purpose bonds was respectively 372,300,324,500,718,500 and 601,300 in the four scenarios;3)when financing costs are considered,the RMB77.4 billion local government special-purpose bonds can push the GDP of Xinjiang to grow by RMB71.876 billion and RMB64.268 billion under scenario 3)and scenario 4).