The paper aims to identify a reasonable method for mining ultra-thick coal seams in an end-slope in surface mine, With a case study of Heidaigou surface coal mine(HSCM), the paper conducted a comparative research on t...The paper aims to identify a reasonable method for mining ultra-thick coal seams in an end-slope in surface mine, With a case study of Heidaigou surface coal mine(HSCM), the paper conducted a comparative research on three mining methods, namely Underground Mining Method(UMM), Highwall Mining System(HMS) and Local Steep Slope Mining Method(LSSMM). A model was firstly established to simulate the impact that UMM and HMS exert on monitoring points and surface deformation. The way that stripping and excavation amount varies with different slope angle, and the corresponding end slope stability were analyzed in the mode of LSSMM. Then a TOPSIS model was established by taking into account six indicators such as recovery ratio, technical complexity and adaptability, the impact on surface mining production, production safety and economic benefits. Finally, LSSMM was determined as the best mining method for mining ultra-thick coal seams in end slope in HSCM.展开更多
The application of a double-face reinforced retaining wall during road construction can reduce engineering costs, speed road paving and have a good influence on environment. An ABAQUS numerical model of a double-face ...The application of a double-face reinforced retaining wall during road construction can reduce engineering costs, speed road paving and have a good influence on environment. An ABAQUS numerical model of a double-face reinforced retaining wall was built. The influence of surface subsidence induced by mining was considered. A physical model test was also performed in the laboratory on a reinforced retaining wall. The influence of subsidence induced by mining was observed. The numerical results match measurements in the laboratory very well. The vertical pressure on the base of the retaining wall, the horizontal displacement of the wall and the horizontal soil pressure acting on the wall were analyzed. The differential settlement of the reinforced belt and axial forces in the wall were also studied.展开更多
A new type of airtight wall with the combination of foamed concrete and pier support was designed in this study. Based on the theories and models related to the foamed concrete and blasting shock load, using the numer...A new type of airtight wall with the combination of foamed concrete and pier support was designed in this study. Based on the theories and models related to the foamed concrete and blasting shock load, using the numerical analysis method, this study obtains the new material＇s mechanical and destruction laws through analyzing its reaction to different conditions of load （mining and shock waves）, airtight wall thickness （1.2, 1.5, 1.8, 2.1 m） and steel pipe diameters （400, 450, 500 and 600 mm）. The results show that： ①foamed concrete can have very good suspension, and the pier column support is the main carrier of roof pressure; ② the damaged area of foamed concrete decreases as the foamed concrete thickness increases. Under impact loading, the thickness of the foamed concrete wall plays a more obvious role in retaining its integrity; ③under the same mining pressure, the damage area increases as the steel pipe diameter increases; ④ with additional mining stress increase, under whether static load or impact load, the stress on the foamed concrete and steel pipe will also increase gradually, therefore the actual airtight wall design will need to be based on specific circumstances in steel stress.展开更多
Gateway supporting in long wall mining has been a problem that restricts the mine production and safety, the paper sets up an interaction model between support and surrounding rock (rock mass structure) and probes the...Gateway supporting in long wall mining has been a problem that restricts the mine production and safety, the paper sets up an interaction model between support and surrounding rock (rock mass structure) and probes the elementary theory about ground pressure behaviors of gateway. Based on the analysis of supporting theories, some new viewpoints about gateways supporting and ground pressure controlling are put forward.展开更多
Based on the study of the slope with gently granular structure in Xingqiao open mine, a new safety cleaning bank mode for steep slope mining was developed, including setting up dint cut, and forming natural retaining ...Based on the study of the slope with gently granular structure in Xingqiao open mine, a new safety cleaning bank mode for steep slope mining was developed, including setting up dint cut, and forming natural retaining wall based on the character of gentle incline slope. It can effectively eliminate the impact of sliding body on the bottom working place and slope body, reduce the dilution of ore, keep rainwater from upper steps away, decrease influence of the weak intermediate layer, and cut cost of disposal waste rock. The safety and reliability of the mode were analyzed and verified from 3 aspects: static load calculation, ANSYS simulation of dynamic loading and spot experiment. The result of static loading calculation shows that the retaining wall can support accumulation and extrusion of granular body, and the glide or overturn disaster will not take place. The simulations of dynamic loading show that the retaining wall remains stable until sliding body collapses from 360 m (10 sublevels). Only one new safety cleaning bank in each 15 sublevels can fully meet the need of engineering. The new mode sustains steep slope (mining,) increases the angle of ultimate slope, and reduces invalid overburden amount of rock by 3%5%. The result of spot experiment has verified the exactness of the above calculations and simulations.展开更多
基金provided by the National Natural Science Foundation of China(No.90510002)the Science and Technology Research of the Ministry of Education of China(No.306008)
文摘The paper aims to identify a reasonable method for mining ultra-thick coal seams in an end-slope in surface mine, With a case study of Heidaigou surface coal mine(HSCM), the paper conducted a comparative research on three mining methods, namely Underground Mining Method(UMM), Highwall Mining System(HMS) and Local Steep Slope Mining Method(LSSMM). A model was firstly established to simulate the impact that UMM and HMS exert on monitoring points and surface deformation. The way that stripping and excavation amount varies with different slope angle, and the corresponding end slope stability were analyzed in the mode of LSSMM. Then a TOPSIS model was established by taking into account six indicators such as recovery ratio, technical complexity and adaptability, the impact on surface mining production, production safety and economic benefits. Finally, LSSMM was determined as the best mining method for mining ultra-thick coal seams in end slope in HSCM.
基金Projects 50874105 supported by the National Natural Science Foundation of China20070290532 by the Specialized Research Fund for Doctoral Program of Higher Education
文摘The application of a double-face reinforced retaining wall during road construction can reduce engineering costs, speed road paving and have a good influence on environment. An ABAQUS numerical model of a double-face reinforced retaining wall was built. The influence of surface subsidence induced by mining was considered. A physical model test was also performed in the laboratory on a reinforced retaining wall. The influence of subsidence induced by mining was observed. The numerical results match measurements in the laboratory very well. The vertical pressure on the base of the retaining wall, the horizontal displacement of the wall and the horizontal soil pressure acting on the wall were analyzed. The differential settlement of the reinforced belt and axial forces in the wall were also studied.
文摘A new type of airtight wall with the combination of foamed concrete and pier support was designed in this study. Based on the theories and models related to the foamed concrete and blasting shock load, using the numerical analysis method, this study obtains the new material＇s mechanical and destruction laws through analyzing its reaction to different conditions of load （mining and shock waves）, airtight wall thickness （1.2, 1.5, 1.8, 2.1 m） and steel pipe diameters （400, 450, 500 and 600 mm）. The results show that： ①foamed concrete can have very good suspension, and the pier column support is the main carrier of roof pressure; ② the damaged area of foamed concrete decreases as the foamed concrete thickness increases. Under impact loading, the thickness of the foamed concrete wall plays a more obvious role in retaining its integrity; ③under the same mining pressure, the damage area increases as the steel pipe diameter increases; ④ with additional mining stress increase, under whether static load or impact load, the stress on the foamed concrete and steel pipe will also increase gradually, therefore the actual airtight wall design will need to be based on specific circumstances in steel stress.
文摘Gateway supporting in long wall mining has been a problem that restricts the mine production and safety, the paper sets up an interaction model between support and surrounding rock (rock mass structure) and probes the elementary theory about ground pressure behaviors of gateway. Based on the analysis of supporting theories, some new viewpoints about gateways supporting and ground pressure controlling are put forward.
文摘Based on the study of the slope with gently granular structure in Xingqiao open mine, a new safety cleaning bank mode for steep slope mining was developed, including setting up dint cut, and forming natural retaining wall based on the character of gentle incline slope. It can effectively eliminate the impact of sliding body on the bottom working place and slope body, reduce the dilution of ore, keep rainwater from upper steps away, decrease influence of the weak intermediate layer, and cut cost of disposal waste rock. The safety and reliability of the mode were analyzed and verified from 3 aspects: static load calculation, ANSYS simulation of dynamic loading and spot experiment. The result of static loading calculation shows that the retaining wall can support accumulation and extrusion of granular body, and the glide or overturn disaster will not take place. The simulations of dynamic loading show that the retaining wall remains stable until sliding body collapses from 360 m (10 sublevels). Only one new safety cleaning bank in each 15 sublevels can fully meet the need of engineering. The new mode sustains steep slope (mining,) increases the angle of ultimate slope, and reduces invalid overburden amount of rock by 3%5%. The result of spot experiment has verified the exactness of the above calculations and simulations.
