A sensitive solvent extraction method for the determination of nonamolar concentrations of silicate in natural waters is developed. According to the traditional aqueous silicate method, silicomolybdenum blue formed by...A sensitive solvent extraction method for the determination of nonamolar concentrations of silicate in natural waters is developed. According to the traditional aqueous silicate method, silicomolybdenum blue formed by the reaction between silicate and ammoni- um molydate and reduced by metol-sulfite reagent is extracted by methyl isobutyl ketone. The absorbance can be enhanced substantially up to 10-folds. The detection limit of silicate is 8 nmol/dm^3 , which is one tenth smaller than the traditional method, with the precision of 4.0% at a silicate level of 50 nmol/dm^3 and 3.2% at a silicate level of 6 μmol/dm^3. Comparing the calibration curves in the distilled water and seawater, it can be seen that the salt effect also exists in the extraction method. However, the salt effect is a linear function of the salinity and can be corrected by simple calibration. The proposed method is successfully applied to the determination of silicate in natural waters. Natural concentrations of arsenate, arsenite and phosphate cause negligible interference.展开更多
The effects of NaCl, KCl and Na_2SO_4 on the liquid–liquid equilibrium(LLE) data for the ternary system, water+ phenol + methyl isobutyl ketone, were determined at 0.101 MPa and 333.15 K and 343.15 K.The nonrandom tw...The effects of NaCl, KCl and Na_2SO_4 on the liquid–liquid equilibrium(LLE) data for the ternary system, water+ phenol + methyl isobutyl ketone, were determined at 0.101 MPa and 333.15 K and 343.15 K.The nonrandom two-liquid(NRTL) model was used to correlate the experimental data and to yield corresponding binary interaction parameters for these salt containing systems.The Hand and Othmer–Tobias equations were used to confirm the dependability of the determined LLE data in this work.Distribution coefficient and selectivity were used to evaluate the extraction performance of methyl isobutyl ketone with the existence of salt.The magnitude of salt effect on the water + phenol + methyl isobutyl ketone(MIBK) system is in the following order: Na_2SO_4>NaCl>KCl.展开更多
In this work, liquid–liquid equilibria(LLE) data for the ternary system methyl tert-butyl ketone(MTBK)+ o, m,p-benzenediol + water were investigated at 333.2 K, 343.2 K and 353.2 K under 101.3 kPa. The performance of...In this work, liquid–liquid equilibria(LLE) data for the ternary system methyl tert-butyl ketone(MTBK)+ o, m,p-benzenediol + water were investigated at 333.2 K, 343.2 K and 353.2 K under 101.3 kPa. The performance of MTBK to extract o, m, p-benzenediol from wastewaters was estimated by partition coefficients and separation factors. The Hand and Bachman equations were both applied to check the reliability of the experimental LLE data. Furthermore, the Non-Random Two-Liquid(NRTL) and Universal Quasi Chemical(UNIQUAC) models were applied to correlate the measured LLE data. The results showed a good agreement with the determined ternary LLE data with the root-mean-square error(RMSE) values below 0.71%. MTBK was proved to be a promising extracting agent in extracting benzenediols from effluents.展开更多
ZrO2-MnO2-ZnO supports were prepared by the co-precipitation method,and then Ni-Na/ZrO2-MnO2-ZnO catalysts were prepared by the impregnation method.In this paper,the reactions to synthesize methyl isopropyl ketone and...ZrO2-MnO2-ZnO supports were prepared by the co-precipitation method,and then Ni-Na/ZrO2-MnO2-ZnO catalysts were prepared by the impregnation method.In this paper,the reactions to synthesize methyl isopropyl ketone and diethyl ketone by the one-step synthesis method over this catalyst were studied,and meanwhile,the impact of the catalyst preparation conditions and the reaction conditions on catalyst performance was also investigated.It was observed that under the conditions when Ni loading was 25%,calcination temperature was 400℃ and reduction temperature was 410℃,this catalyst had good catalytic performance on the reaction.The suitable reaction conditions were achieved:reaction temperature was 400℃;reaction at atmospheric pressure;liquid hourly space velocity of raw material of 0.5 h 1 ;and the molar ratio of(methanol)/(methyl ethyl ketone)/(water) was equal to 1/1/1.Under such conditions,the conversion of methyl ethyl ketone could achieve 41.7%,and the overall selectivity of methyl isopropyl ketone and diethyl ketone could achieve 83.3%,which was comparable to the conversion of 38.1% and the selectivity of 82.2% achieved by using palladium as the active material.The good stability made this catalyst have good prospects for industrial application.展开更多
A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 ...A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 5660(3) nm, c =1 3512(3) nm, α=90 00°, β=94 39(1)°, γ=90 00°, V =3 6037(12) nm 3, Z =4 . The complex is a ten-coordinated one with a lanthanum ion surrounded by a N 4O 6 set. The crystal structure is stabilized by hydrogen bonds between water molecules and NO - 3 anions.展开更多
A synthetic technology for the production of methyl-ethyl-ketone (MEK) is introduced, which makes use of butylene catalytic hydration to produce secondary butanol (SBA) and this is followed by dehydrogenation of SBA. ...A synthetic technology for the production of methyl-ethyl-ketone (MEK) is introduced, which makes use of butylene catalytic hydration to produce secondary butanol (SBA) and this is followed by dehydrogenation of SBA. By optimizing the operating conditions of a commercial unit, the running results showed that the recom-mended process was successful and that the catalysts had high activity, good selectivity, and long lifespan, which ensured long-term running in commercial units.展开更多
Tuning accurately the color of electrochromic materials has been considered as a crucial step to achieve successful electrochromic display. In this paper, the effect of substitution on the color of methyl ketone bridg...Tuning accurately the color of electrochromic materials has been considered as a crucial step to achieve successful electrochromic display. In this paper, the effect of substitution on the color of methyl ketone bridged electrochromic materials has been investigated systematically by experimental and TDDFT methods. By screening 15 functional and 11 basis sets, a statistical method based on M052 X data is developed to estimate the maximum absorption wavelengths(λ_(max)) of electrochromic materials, based on analyzing λ_(max) of 18 molecules. For methyl ketone bridged electrochromic materials, the color from yellow to green and λ_(max) from 400 to 690 nm can be adjusted by electron-withdrawing functional group on Ar2 and electron-donating functional group on Ar1. This work not only exhibits the suitable method to predict the maximum absorption wavelength and color of electrochromic materials, but also inspires and accelerates further development of electrochromic materials for future displays.展开更多
Supported nickel-based catalysts were prepared by the incipient wetness impregnation method for the selective hydrogenation of methyl isobutyl ketone to methyl isobutyl carbinol in a fixed-bed reactor. The effects of ...Supported nickel-based catalysts were prepared by the incipient wetness impregnation method for the selective hydrogenation of methyl isobutyl ketone to methyl isobutyl carbinol in a fixed-bed reactor. The effects of the nickel source,Ni loading, calcination time, and calcination temperature on the hydrogenation performance were studied. The experimental results showed that the Ni/γ-Al_2O_3 catalyst demonstrated the highest catalytic performance under the preparation conditions by using nickel nitrate as the nickel source with a NiO loading of 20%, followed by calcination at 440°C for 5h. In addition,this catalyst showed the largest specific surface area, best crystal structure, highest active component content, smallest particle size, and uniform distribution of NiO on the surface of the carrier. The nickel-based catalyst prepared using the optimized conditions exhibited a 96.1% conversion of methyl isobutyl ketone, with a methyl isobutyl carbinol selectivity of 99.6%. The described procedure is very effective for the preparation of methyl isobutyl carbinol using methyl isobutyl ketone as the feedstock.展开更多
测定5-氯-2戊酮和环丙基甲基酮的物化性质:密度、黏度、摩尔体积、热膨胀系数和表面张力。测定5-氯-2-戊酮(1)+环丙基甲基酮(2)二元体系的汽液相平衡(VLE),并应用Aspen Plus V11中Van Laar方程、Wilson方程和NRTL方程对实验数据进行关联...测定5-氯-2戊酮和环丙基甲基酮的物化性质:密度、黏度、摩尔体积、热膨胀系数和表面张力。测定5-氯-2-戊酮(1)+环丙基甲基酮(2)二元体系的汽液相平衡(VLE),并应用Aspen Plus V11中Van Laar方程、Wilson方程和NRTL方程对实验数据进行关联,回归得到二元交互参数。实验结果通过热力学一致性检查。该研究不仅补充了汽液相平衡数据库,也为5-氯-2-戊酮与环丙基甲基酮的分离提供热力学数据。展开更多
基金The National Science Foundation of China under contract No.40606028the Special Fund from the National Key Basic Research Program of China under contract No.2006CB400601.
文摘A sensitive solvent extraction method for the determination of nonamolar concentrations of silicate in natural waters is developed. According to the traditional aqueous silicate method, silicomolybdenum blue formed by the reaction between silicate and ammoni- um molydate and reduced by metol-sulfite reagent is extracted by methyl isobutyl ketone. The absorbance can be enhanced substantially up to 10-folds. The detection limit of silicate is 8 nmol/dm^3 , which is one tenth smaller than the traditional method, with the precision of 4.0% at a silicate level of 50 nmol/dm^3 and 3.2% at a silicate level of 6 μmol/dm^3. Comparing the calibration curves in the distilled water and seawater, it can be seen that the salt effect also exists in the extraction method. However, the salt effect is a linear function of the salinity and can be corrected by simple calibration. The proposed method is successfully applied to the determination of silicate in natural waters. Natural concentrations of arsenate, arsenite and phosphate cause negligible interference.
基金Supported by the National Natural Science Foundation of China(21506066)State Key Laboratory of Pulp and Paper Engineering(201708)+2 种基金the Guangdong Natural Science Foundation(2014A030310260)the Fundamental Research Funds for the Central Universities SCUT(2017ZD069)the Guangzhou Technology Project(201804010219)
文摘The effects of NaCl, KCl and Na_2SO_4 on the liquid–liquid equilibrium(LLE) data for the ternary system, water+ phenol + methyl isobutyl ketone, were determined at 0.101 MPa and 333.15 K and 343.15 K.The nonrandom two-liquid(NRTL) model was used to correlate the experimental data and to yield corresponding binary interaction parameters for these salt containing systems.The Hand and Othmer–Tobias equations were used to confirm the dependability of the determined LLE data in this work.Distribution coefficient and selectivity were used to evaluate the extraction performance of methyl isobutyl ketone with the existence of salt.The magnitude of salt effect on the water + phenol + methyl isobutyl ketone(MIBK) system is in the following order: Na_2SO_4>NaCl>KCl.
基金Supported by the State Key Laboratory of Pulp and Paper Engineering in China(201703,201708)
文摘In this work, liquid–liquid equilibria(LLE) data for the ternary system methyl tert-butyl ketone(MTBK)+ o, m,p-benzenediol + water were investigated at 333.2 K, 343.2 K and 353.2 K under 101.3 kPa. The performance of MTBK to extract o, m, p-benzenediol from wastewaters was estimated by partition coefficients and separation factors. The Hand and Bachman equations were both applied to check the reliability of the experimental LLE data. Furthermore, the Non-Random Two-Liquid(NRTL) and Universal Quasi Chemical(UNIQUAC) models were applied to correlate the measured LLE data. The results showed a good agreement with the determined ternary LLE data with the root-mean-square error(RMSE) values below 0.71%. MTBK was proved to be a promising extracting agent in extracting benzenediols from effluents.
基金Supported by the National Science and Technology Support Program Project (2006BAE03B06)
文摘ZrO2-MnO2-ZnO supports were prepared by the co-precipitation method,and then Ni-Na/ZrO2-MnO2-ZnO catalysts were prepared by the impregnation method.In this paper,the reactions to synthesize methyl isopropyl ketone and diethyl ketone by the one-step synthesis method over this catalyst were studied,and meanwhile,the impact of the catalyst preparation conditions and the reaction conditions on catalyst performance was also investigated.It was observed that under the conditions when Ni loading was 25%,calcination temperature was 400℃ and reduction temperature was 410℃,this catalyst had good catalytic performance on the reaction.The suitable reaction conditions were achieved:reaction temperature was 400℃;reaction at atmospheric pressure;liquid hourly space velocity of raw material of 0.5 h 1 ;and the molar ratio of(methanol)/(methyl ethyl ketone)/(water) was equal to 1/1/1.Under such conditions,the conversion of methyl ethyl ketone could achieve 41.7%,and the overall selectivity of methyl isopropyl ketone and diethyl ketone could achieve 83.3%,which was comparable to the conversion of 38.1% and the selectivity of 82.2% achieved by using palladium as the active material.The good stability made this catalyst have good prospects for industrial application.
基金Supported by the National Natural Science Foundation of China( No. 2 98710 14 ) and the Foundation of Doctor byL anzhou U niversit
文摘A novel La complex with methyl-2-pyridyl ketone benzoyl hydrazone has been synthesized and determined by single crystal X-ray diffraction. The crystal is monoclinic with space group C2/c, a =1 7081(3) nm, b =1 5660(3) nm, c =1 3512(3) nm, α=90 00°, β=94 39(1)°, γ=90 00°, V =3 6037(12) nm 3, Z =4 . The complex is a ten-coordinated one with a lanthanum ion surrounded by a N 4O 6 set. The crystal structure is stabilized by hydrogen bonds between water molecules and NO - 3 anions.
文摘A synthetic technology for the production of methyl-ethyl-ketone (MEK) is introduced, which makes use of butylene catalytic hydration to produce secondary butanol (SBA) and this is followed by dehydrogenation of SBA. By optimizing the operating conditions of a commercial unit, the running results showed that the recom-mended process was successful and that the catalysts had high activity, good selectivity, and long lifespan, which ensured long-term running in commercial units.
基金This work was supported by National Science Foundation of China （No. 20264001 ）, National Science Foundation of Jiangxi Province, Innovation Fund for Technology Based Firms of China （No. 06C26213601342）.
基金Financially supported by the National Natural Science Foundation of China(No.21602075)the Natural Science Foundation of Jilin Province(No.20180520155JH)the Young Elite Scientist Sponsorship Program by Jilin Province(181903)
文摘Tuning accurately the color of electrochromic materials has been considered as a crucial step to achieve successful electrochromic display. In this paper, the effect of substitution on the color of methyl ketone bridged electrochromic materials has been investigated systematically by experimental and TDDFT methods. By screening 15 functional and 11 basis sets, a statistical method based on M052 X data is developed to estimate the maximum absorption wavelengths(λ_(max)) of electrochromic materials, based on analyzing λ_(max) of 18 molecules. For methyl ketone bridged electrochromic materials, the color from yellow to green and λ_(max) from 400 to 690 nm can be adjusted by electron-withdrawing functional group on Ar2 and electron-donating functional group on Ar1. This work not only exhibits the suitable method to predict the maximum absorption wavelength and color of electrochromic materials, but also inspires and accelerates further development of electrochromic materials for future displays.
基金financially supported by the National Natural Science Foundation of China (91634101)the Project on Construction of Innovative Teams and Teacher Career Development for Universities and Colleges under Beijing Municipality (IDHT20180508)
文摘Supported nickel-based catalysts were prepared by the incipient wetness impregnation method for the selective hydrogenation of methyl isobutyl ketone to methyl isobutyl carbinol in a fixed-bed reactor. The effects of the nickel source,Ni loading, calcination time, and calcination temperature on the hydrogenation performance were studied. The experimental results showed that the Ni/γ-Al_2O_3 catalyst demonstrated the highest catalytic performance under the preparation conditions by using nickel nitrate as the nickel source with a NiO loading of 20%, followed by calcination at 440°C for 5h. In addition,this catalyst showed the largest specific surface area, best crystal structure, highest active component content, smallest particle size, and uniform distribution of NiO on the surface of the carrier. The nickel-based catalyst prepared using the optimized conditions exhibited a 96.1% conversion of methyl isobutyl ketone, with a methyl isobutyl carbinol selectivity of 99.6%. The described procedure is very effective for the preparation of methyl isobutyl carbinol using methyl isobutyl ketone as the feedstock.
文摘测定5-氯-2戊酮和环丙基甲基酮的物化性质:密度、黏度、摩尔体积、热膨胀系数和表面张力。测定5-氯-2-戊酮(1)+环丙基甲基酮(2)二元体系的汽液相平衡(VLE),并应用Aspen Plus V11中Van Laar方程、Wilson方程和NRTL方程对实验数据进行关联,回归得到二元交互参数。实验结果通过热力学一致性检查。该研究不仅补充了汽液相平衡数据库,也为5-氯-2-戊酮与环丙基甲基酮的分离提供热力学数据。
