Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating(LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point(PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.

Hybrid Long-Period Fiber Grating with Multimode Fiber Core for Refractive Index Measurement

A refractive index(RI) sensor based on hybrid long-period fiber grating(LPFG) with multimode fiber core(MMFC) is proposed and demonstrated. The surrounding RI can be determined by monitoring the separation between the resonant wavelengths of the LPFG and MMFC since the resonant wavelengths of the LPFC and MMFC will shift in opposite directions when the surrounding RI changes. Fxperimental results show that the sensor possesses an enhanced sensitivity of 526.92 nm/RIU in the RI range of 1.387-1.394 RIU. The response to the temperature is also discussed.

Ag-coated Long-period Fiber Grating

Based on coupled-mode theo ry , the eigenvalue equation of five-layered long-period fiber grating(LPFG) sens or with Ag film and gas-sensitive film overlays are firstly studied. The probl em of resolving complex eigenvalue equation on five-layered LPFG is analyzed, a nd the method of resolution is also given. Then the eigenvalue equation of three -layered metal cladding LPFG is analyzed, and the complex transcendental equati on is also discussed. The computing result shows that the coupling between the l ow-order EH modes and the core mode is much stronger than that between the low -order HE modes and the core mode.

Fabrication of long-period fiber gratings by CO_2 laser in fiber under tension

We demonstrate experimentally fabrication of CO2 laser written long-period fiber gratings (LPFGs) in single-mode fiber (SMF) under tension. New transmission dips can be generated due to the frozen-in stress in the fiber under tension. Dynamics analysis of laser writing process is performed to study the mechanism of the grating inscription. Experimental results show that the wavelength shift of new generated resonance dips can shift towards the longer or shorter wavelength with the increase of laser scanning cycles for gratings with different pitches.

Monitoring shear deformation of sliding zone via fiber Bragg grating and particle image velocimetry

Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between strain measurements of quasi-distributed fiber Bragg grating(FBG)sensing arrays and shear displacements of surrounding soil remains elusive.In this study,a direct shear model test was conducted to simulate the shear deformation of sliding zones,in which the soil internal deformation was captured using FBG strain sensors and the soil surface deformation was measured by particle image velocimetry(PIV).The test results show that there were two main slip surfaces and two secondary ones,developing a spindle-shaped shear band in the soil.The formation of the shear band was successfully captured by FBG sensors.A sinusoidal model was proposed to describe the fiber optic cable deformation behavior.On this basis,the shear displacements and shear band widths were calculated by using strain measurements.This work provides important insight into the deduction of soil shear deformation using soil-embedded FBG strain sensors.

Utilizing phase-shifted long-period fiber grating to suppress spectral broadening of a high-power fiber MOPA laser system

Suppressing nonlinear effects in high-power fiber lasers based on fiber gratings has become a hotspot.At present,research is mainly focused on suppressing stimulated Raman scattering in a high-power fiber laser.However,the suppression of spectral broadening,caused by self-phase modulation or four-wave mixing,is still a challenging attribute to the close distance between the broadened laser and signal laser.If using a traditional fiber grating with only one stopband to suppress the spectral broadening,the signal power will be stripped simultaneously.Confronting this challenge,we propose a novel method based on phase-shifted long-period fiber grating(PS-LPFG)to suppress spectral broadening in a high-power fiber master oscillator power amplifier(MOPA)laser system in this paper.A PS-LPFG is designed and fabricated on 10/130 passive fiber utilizing a point-by-point scanning technique.The resonant wavelength of the fabricated PS-LPFG is 1080 nm,the full width at half maximum of the passband is 5.48 nm,and stopband extinction exceeds 90%.To evaluate the performance of the PS-LPFG,the grating is inserted into the seed of a kilowattlevel continuous-wave MOPA system.Experiment results show that the 30 dB linewidth of the output spectrum is narrowed by approximately 37.97%,providing an effective and flexible way for optimizing the output linewidth of highpower fiber MOPA laser systems.

Highly sensitive torsion sensor based on triangular-prism-shaped long-period fiber gratings

We propose and investigate a compact optical fiber sensor that aims to measure the torsion in both amount and direction with high sensitivity.This sensor is configured by a triangular-prism-shaped long-period fiber grating,which is fabricated by the high frequency CO_(2) laser polished method.The unique design of the triangular-shaped structure breaks the rotational symmetry of the optical fiber and provides high sensitivity for torsion measurement.In preliminary experiments,the torsion response of the sensor achieves a good stability and linearity.The torsion sensitivity is 0.54 nm/(rad/m),which renders the proposed structure a highly sensitive torsion sensor.

Reduction of the Polarization-Dependent Loss of Long-Period Fiber Gratings by Thermal Heating

The polarization-dependent loss of UV-written long-period fiber gratings was significantly reduced by increasing the pulse repetition rate of the writing UV beam. The effect is closely related with the enhanced photosensitivity induced by thermal heating.

Coupled Mode Characteristics From the Perturbation of 3D Printed Long-Period Fiber Grating Devices

Characteristics of electric field from a coupled mode inside an optical fiber under perturbation by three-dimensional(3D)printed long-period fiber grating(LPFG)device have been observed in this work by the experiment and simulation.The various periodic index differences referring to the weights of perturbation by 3D printed LPFG device are applied on the single-mode fiber.The experimental results show that the resonant wavelength shift is a linear function of the grating period with the maximum coefficient of determination R2 of 0.9995.Some of resonant wavelengths are chosen to run simulations to investigate the electric field distribution.The scattering direction of the electric field states the magnitude of leaking optical power when the light transmits through the grating region applied to the single-mode fiber.Both the experimental and simulation results demonstrate that our proposed scheme can usefully be applied to selective tunable filters,intruder sensors,etc.

Novel Apodized Fiber Bragg GratingApplied for Medical Sensors:Performance Investigation

Sensors play an important role in shaping and monitoring human health.Exploration of methods to use Fiber Bragg Grating(FBG)with enhanced sensitivity has attracted great interest in the field of medical research.In this paper,a novel apodization function is proposed and performance evaluation and optimization of the same have been made.A comparison was conducted between various existing apodization functions and the proposed one based on optical characteristics and sensor parameters.The results evince the implementation of the proposed apodization function for vital sign measurement.The optical characteristics considered for evaluation are Peak Resonance Reflectivity level,Side Lobes Reflectivity level and FullWidth HalfMaximum(FWHM).The proposed novel apodization novel function has better FWHM,which is narrower than the FWHM of uniform FBG.Sensor characteristics like a quality parameter,detection accuracy and sensitivity also show improvement.The proposed novel apodization function is demonstrated to have a better shift in wavelength in terms of temperature and pulse measurement than the existing functions.The sensitivity of the proposed apodized function is enhanced with a Poly-dimethylsiloxane coating of varying thickness,which is 6 times and 5.14 times greater than uniform Fiber Bragg grating and FBG with the proposed novel apodization function,respectively,enhancing its utilization in the field of medicine.

Encrypted optical fiber tag based on encoded fiber Bragg grating array

Optical fibers are typically used in telecommunications services for data transmission,where the use of fiber tags is essential to distinguish between the different transmission fibers or channels and thus ensure the working functionality of the communication system.Traditional physical entity marking methods for fiber labeling are bulky,easily confused,and,most importantly,the label information can be accessed easily by all potential users.This work proposes an encrypted optical fiber tag based on an encoded fiber Bragg grating(FBG)array that is fabricated using a point-by-point femtosecond laser pulse chain inscription method.Gratings with different resonant wavelengths and reflectivities are realized by adjusting the grating period and the refractive index modulations.It is demonstrated that a binary data sequence carried by a fiber tag can be inscribed into the fiber core in the form of an FBG array,and the tag data can be encrypted through appropriate design of the spatial distributions of the FBGs with various reflection wavelengths and reflectivities.The proposed fiber tag technology can be used for applications in port identification,encrypted data storage,and transmission in fiber networks.

Critical dispersion of chirped fiber Bragg grating for eliminating time delay signature of distributed feedback laser chaos

Optical chaos has attracted widespread attention owing to its complex dynamic behaviors.However,the time delay signature(TDS)caused by the external cavity mode reduces the complexity of optical chaos.We propose and numerically demonstrate the critical dispersion of chirped fiber Bragg grating(CFBG)for eliminating the TDS of laser chaos in this work.The critical dispersion,as a function of relaxation frequency and bandwidth of the optical spectrum,is found through extensive dynamics simulations.It is shown that the TDS can be eliminated when the dispersion of CFBG is above this critical dispersion.In addition,the influence of dispersive feedback light and output light from a laser is investigated.These results provide important quantitative guidance for designing chaotic semiconductor lasers without TDS.

Determination of the Postmortem Interval Using Fiber Bragg Grating Sensors

Fiber Bragg grating(FBG)sensors are often used in monitoring activities and to ensure that environmental parameters satisfy industrial requirements.They offer crucial safety measures in the early detection of hazards due to their greatly reduced size,low weight,flexibility,and immunity to electromagnetic interference.These characteristics make FBGs suitable also for use in relation to the human body for in vivo measurements and long-term monitoring.In this study,recent developments are presented with regard to the utilization of these sensors to measure the so-called post-mortem interval(PMI).Such developments rely on numerical simulations based on the Matlab software and monitoring of the rectal temperature,which is one of the main parameters for estimating the PMI.First,the Matlab software is used to solve the Henssge equation for different ambient temperatures and for different body masses;then a Bragg grating sensors is used for post-mortem dating.The results and their accuracy are discussed.

Characteristic research on mechanically induced long-period fiber gratings

A full experimental characterization of mechanically induced long-period fiber gratings (MLPFGs) fabricated by pressing a plate with periodic grooves against a short length of fiber is presented. This technique enables a good control over the gratings' isolation loss peaks and has high repeatability. The spectra characteristics of MLPFGs are studied with the change of the parameters including pressure,period,and temperature. The produced MLPFGs have low insertion loss (< 0.2 dB) and the loss peaks can be higher than 20 dB. A large tunability of the resonant wavelength (> 14 nm) is achieved through adjusting pres-sure grooves' period. The center wavelength temperature sensitivities of 0.057,0.086 nm/℃,and resonant peak temperature sensitivities of 0.230,0.312 dB/℃,are achieved for jacketed and unjacketed fibers,respectively. These MLPFGs,which are simple and inexpensive,also offer the unique advantages of being tunable,erasable,and reconfigurable.

In-fiber photoelectric device based on graphene-coated tilted fiber grating

Graphene and related two-dimensional materials have attracted great research interests due to prominently optical and electrical properties and flexibility in integration with versatile photonic structures.Here,we report an in-fiber photoelec-tric device by wrapping a few-layer graphene and bonding a pair of electrodes onto a tilted fiber Bragg grating(TFBG)for photoelectric and electric-induced thermo-optic conversions.The transmitted spectrum from this device consists of a dense comb of narrowband resonances that provides an observable window to sense the photocurrent and the electrical injection in the graphene layer.The device has a wavelength-sensitive photoresponse with responsivity up to 11.4 A/W,allowing the spectrum analysis by real-time monitoring of photocurrent evolution.Based on the thermal-optic effect of electrical injection,the graphene layer is energized to produce a global red-shift of the transmission spectrum of the TF-BG,with a high sensitivity approaching 2.167×10^(4)nm/A^(2).The in-fiber photoelectric device,therefore as a powerful tool,could be widely available as off-the-shelf product for photodetection,spectrometer and current sensor.

Thermo-hydro-poro-mechanical responses of a reservoir-induced landslide tracked by high-resolution fiber optic sensing nerves

Thermo-poro-mechanical responses along sliding zone/surface have been extensively studied.However,it has not been recognized that the potential contribution of other crucial engineering geological interfaces beyond the slip surface to progressive failure.Here,we aim to investigate the subsurface multiphysics of reservoir landslides under two extreme hydrologic conditions(i.e.wet and dry),particularly within sliding masses.Based on ultra-weak fiber Bragg grating(UWFBG)technology,we employ specialpurpose fiber optic sensing cables that can be implanted into boreholes as“nerves of the Earth”to collect data on soil temperature,water content,pore water pressure,and strain.The Xinpu landslide in the middle reach of the Three Gorges Reservoir Area in China was selected as a case study to establish a paradigm for in situ thermo-hydro-poro-mechanical monitoring.These UWFBG-based sensing cables were vertically buried in a 31 m-deep borehole at the foot of the landslide,with a resolution of 1 m except for the pressure sensor.We reported field measurements covering the period 2021 and 2022 and produced the spatiotemporal profiles throughout the borehole.Results show that wet years are more likely to motivate landslide motions than dry years.The annual thermally active layer of the landslide has a critical depth of roughly 9 m and might move downward in warmer years.The dynamic groundwater table is located at depths of 9e15 m,where the peaked strain undergoes a periodical response of leap and withdrawal to annual hydrometeorological cycles.These interface behaviors may support the interpretation of the contribution of reservoir regulation to slope stability,allowing us to correlate them to local damage events and potential global destabilization.This paper also offers a natural framework for interpreting thermo-hydro-poro-mechanical signatures from creeping reservoir bank slopes,which may form the basis for a landslide monitoring and early warning system.

A new phase-shifted long-period fiber grating for simultaneous measurement of torsion and temperature

A novel phase-shifted long-period fiber grating(PS-LPFG)for the simultaneous measurement of torsion and temperature is described and experimentally demonstrated.The PS-LPFG is fabricated by inserting a pretwisted structure into the long-period fiber grating(LPFG)written in single-mode fiber(SMF).Experimental results show that the torsion sensitivities of the two dips are?0.114 nm/(rad/m)and?0.069 nm/(rad/m)in the clockwise direction,and?0.087 nm/(rad/m)and?0.048 nm/(rad/m)in the counterclockwise direction,respectively.The temperature sensitivities of the two dips are 0.057 nm/℃ and 0.051 nm/℃,respectively.The two dips of the PS-LPFG exhibit different responses to torsion and temperature.Simultaneous measurement of torsion and temperature can be implemented using a sensor.The feasibility and stabilization of simultaneous torsion and temperature measurement have been confirmed,and hence this novel PS-LPFG demonstrates potential for fiber sensing and engineering applications.

Intensity detecting refractive index sensors with long-period fiber gratings written in STS structure

A refractive index intensity detecting sensor with long-period grating written in the single-mode–thin-core–single-mode fiber(STS) structure is proposed and optimized theoretically.The sensor is composed of two single-mode fibers connected by a section of long-period fiber grating fabricated on thin-core fiber.After optimization and benefitting from the phase matching point, the loss peak of the structure can reach 62.8dB theoretically.The wavelength of the characteristic peak is fixed at the phase matching point, so intensity detection can be achieved.The sensitivity can reach 272.5dB/RIU.The structural optimization in this Letter provides a reference for the fabrication of an easy-made all-fiber sensor without extra cladding.

Dual-channel microfluidic sensor based on side-hole fiber with two long-period fiber gratings

We propose and demonstrate a dual-channel microfluidic sensor based on a side-hole fiber(SHF)with two longperiod fiber grating(LPFG)structures.There are two air holes in the SHF,which are natural microfluidic channels.We fabricate two LPFGs(long-period gratings LPG-A and LPG-B)in the SHF with the resonance wavelengths of 1268.7 nm and 1385.8 nm,respectively.Results show that the refractive index sensitivities of LPG-A and LPG-B are?76.0 nm/RIU and?71.1 nm/RIU,respectively.One can measure the refractive index of liquid samples in two channels simultaneously.The proposed dual-channel microfluidic sensor has advantages of good linearity response,fluidic technology compatibility,and easy light input/output coupling and system integration,which helps the sensor to have a potential application in environmental detection and food safety detection.

Optical Sensing Based on Light Coupling Between Two Parallel Long-Period Fiber Gratings

为折射索引和极小的排水量的测量的新光基于紧张的察觉到机制在这篇论文被建议，它基于修改在二个平行长时期的纤维栅栏之间联合的光的数量。有实验和模拟结果的这察觉到的机制的特征被表明。