Spatial structural analysis of main saddle for single tower spatial cable self-anchored suspension bridge

Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is established by the secondary development technology based on the platform of the general finite element program, and a reasonable load pattern is used in its spatial structural analysis, by which its path of force transference and stress distribution are obtained. Matched with the spatial main cable, the tangency point correction method is also discussed. The results show that the lateral wall stress of the saddle groove is higher than the stress within the wall due to the role of lateral forces in the finished bridge state; the horizontal volume force of the main cable can generate a gradient distributed vertical extrusion pressure on the saddle clamping device and the main saddle body; the geometric nonlinear effect of the self- anchored suspension bridge cable system in the construction process is significant, which can be reflected in the spatial tangent point position of the main cable with the main saddle changes a lot from free cable to finished cable.

Test and numerical investigations on static and dynamic characteristics of extra-wide concrete self-anchored suspension bridge under vehicle loads

The present work is aimed at studying the mechanic properties of the extra-wide concrete self-anchored suspension bridge under static and dynamic vehicle loads. Based on the field test using 12 heavy trucks and finite element simulations, the static deformations of different components, stress increments and distributions of the girder, as well as the vibration characteristics and damping ratio of the Hunan Road Bridge were analyzed, which is the widest self-anchored suspension bridge in China at present. The dynamic responses were calculated using the Newmark-β integration method assisted by the simulation models of bridge and vehicles, the influences on the dynamic impact coefficient(DIC) brought by the vehicle parameters, girder width, eccentricity travel and deck flatness were also researched. The spatial effect of the girder is obvious due to the extra width, which performs as the stress increments distribute unevenly along the transverse direction, and the girder deflections and stress increments of the upper plate change as a "V" and "M" shape respectively under the symmetrical vehicle loads affected by the shear lag effect, cross slope and local effect of the wheels, the maximum of stress increments are located in the junctions with the inner webs. The obvious girder torsional deformation and the apparent unevenness of the hanger forces between the two cable planes under the eccentric vehicle loads, together with the mode shapes such as the girder transverse bending and torsion which appear relatively earlier, all reflect the weakened torsional rigidity of the extra-wide girder. The transverse displacements of towers are more obvious than the longitudinal ones. As for the influences on the DIC, the static effect of the heavier vehicles plays a major role when pass through with a higher speed and the changes of vehicle suspension stiffness generate greater impacts than the suspension damp. The values of DIC in the vehicle-running side during the eccentric travel, affected by the restricts from the static effects of the eccentric moving trucks, are significantly smaller than the vehicle-free side, the increase in the road roughness is the most sensitive one among the above influential factors. The results could provide references for the design, static and dynamic response analysis of the similar extra-wide suspension bridges.

Determination of reasonable finished state of self-anchored suspension bridges

A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. The initial hanger tensions are first obtained through an iterative analysis by combining the girder-tower-only finite element(FE) model with the analytical program for shape finding of the spatial cable system. These initial hanger tensions, together with the corresponding cable coordinates and internal forces, are then included into the FE model of the total bridge system, the nonlinear analysis of which involves the optimization technique. Calculations are repeated until the optimization algorithm converges to the most optimal hanger tensions(i.e. the desired reasonable finished bridge state). The "temperature rigid arm" is introduced to offset the unavoidable initial deformations of the girder and tower, which are due to the huge axial forces originated from the main cable. Moreover, by changing the stiffness coefficient K in the girder-tower-only FE model, the stiffness proportion of the main girder, the tower or the cable subsystem in the whole structural system could be adjusted according to the design intentions. The effectiveness of the proposed method is examined and demonstrated by one simple tutorial example and one self-anchored suspension bridge.

Health monitoring and comparative analysis of time-dependent effect using different prediction models for self-anchored suspension bridge with extra-wide concrete girder

The structural health status of Hunan Road Bridge during its two-year service period from April 2015 to April 2017 was studied based on monitored data.The Hunan Road Bridge is the widest concrete self-anchored suspension bridge in China at present.Its structural changes and safety were evaluated using the health monitoring data,which included deformations,detailed stresses,and vibration characteristics.The influences of the single and dual effects comprising the ambient temperature changes and concrete shrinkage and creep(S&C)were analyzed based on the measured data.The ANSYS beam finite element model was established and validated by the measured bridge completion state.The comparative analyses of the prediction results of long-term concrete S&C effects were conducted using CEB-FIP 90 and B3 prediction models.The age-adjusted effective modulus method was adopted to simulate the aging behavior of concrete.Prestress relaxation was considered in the stepwise calculation.The results show that the transverse deviations of the towers are noteworthy.The spatial effect of the extra-wide girder is significant,as the compressive stress variations at the girder were uneven along the transverse direction.General increase and decrease in the girder compressive stresses were caused by seasonal ambient warming and cooling,respectively.The temperature gradient effects in the main girder were significant.Comparisons with the measured data showed that more accurate prediction results were obtained with the B3 prediction model,which can consider the concrete material parameters,than with the CEB-FIP 90 model.Significant deflection of the midspan girder in the middle region will be caused by the deviations of the cable anchoring positions at the girder ends and tower tops toward the midspan due to concrete S&C.The increase in the compressive stresses at the top plate and decrease in the stresses at the bottom plate at the middle midspan will be significant.The pre-deviations of the towers toward the sidespan and pre-lift of the midspan girder can reduce the adverse influences of concrete S&C on the structural health of the self-anchored suspension bridge with extra-wide concrete girder.

Study of Vertical Seismic Response of Concrete Self-Anchored Suspension Bridges

Based on the variational prineiple of incomplete generalized potential energy with large deflection, the vertical nonlinear vibrational differential equation of self-anchored suspension bridge is presented by taking the effect of coupling of flexural and axial action into consideration. The linear vertical equation is obtained by omitting the nonlinear term, and the pseudo excitation method(PEM). Taking the self-anchored concrete suspension bridge over Lanqi Songhua river for an example, the expected peak responses of main beam, towers and cables are calculated. And the seismic spatial effects on vertical seismic response of self-anchored suspension bridges are discussed.

Seismic Behavior Analysis of Steel Tower of Self-anchored Suspension Bridge

Self-anchored suspension bridge is composed of tower and its foundation, stiffened beam, main cable, sling, side pier and its foundation, auxiliary pier and its foundation. The performance and importance of the components of the bridge are different. The main tower of self-anchored suspension bridge is a very important component. Once the injury and damage occur under earthquake, it is not only difficult to inspect and repair, let alone replace. This paper calculates the seismic performance of self-anchored suspen-sion bridge steel tower based on the application of Wuhan Gutian Bridge steel tower.

Structural health monitoring of long-span suspension bridges using wavelet packet analysis

During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage, This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform （WPT）. The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum （WPES） has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations.

Damage alarming of long-span suspension bridge based on GPS-RTK monitoring

Structure damage identification and alarming of long-span bridge were conducted with three-dimensional dynamic displacement data collected by GPS subsystem of health monitoring system on Runyang Suspension Bridge.First,the effects of temperature on the main girder spatial position coordinates were analyzed from the transverse,longitudinal and vertical directions of bridge,and the correlation regression models were built between temperature and the position coordinates of main girder in the longitudinal and vertical directions;then the alarming indices of coordinate residuals were conducted,and the mean-value control chart was applied to making statistical pattern identification for abnormal changes of girder dynamic coordinates;and finally,the structural damage alarming method of main girder was established.Analysis results show that temperature has remarkable correlation with position coordinates in the longitudinal and vertical directions of bridge,and has weak correlation with the transverse coordinates.The 3%abnormal change of the longitudinal coordinates and 5%abnormal change of the vertical ones caused by structural damage are respectively identified by the mean-value control chart method based on GPS dynamic monitoring data and hence the structural abnormalities state identification and damage alarming for main girder of long-span suspension bridge can be realized in multiple directions.

Advanced aerostatic analysis of long-span suspension bridges

As the span length of suspension bridges increases, the diameter of cables and thus the wind load acting on them, the nonlinear wind-structure interaction and the wind speed spatial non-uniformity all increase consequently, which may have unnegligible influence on the aerostatic behavior of long-span suspension bridges. In this work, a method of advanced aerostatic analysis is presented firstly by considering the geometric nonlinearity, the nonlinear wind-structures and wind speed spatial non-uniformity. By taking the Runyang Bridge over the Yangtze River as example, effects of the nonlinear wind-structttre interaction, wind speed spatial non-uniformity, and the cable＇s wind load on the aerostatic behavior of the bridge are investigated analytically. The results showed that these factors all have important influence on the aerostatic behavior, and should be considered in the aerostatic analysis of long and particularly super long-span suspension bridges.

Cable flexural rigidity influence on suspension bridges static properties

In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.And then,four finite element models of a same long-span suspension bridge with different cable element are set up to be analyzed.Both experimental and numerical simulation results show that,with the increase of the span and the decrease of sag-span ratio,the influence of the cable flexural rigidity is significant.The difference of nodes displacement reaches more than 10 cm in construction analysis,which will bring some trouble to the construction.And the difference of the maximum section edge normal stress may reach 15%,which may have an adverse impact onto the bridge.Therefore,considering the cable flexural rigidity is necessary on some analysis of suspension bridges.

Study on seismic response control of a single-tower self-anchored suspension bridge with elastic-plastic steel damper

Elastic-plastic steel damper(EPSD) is a new device controlling seismic responses.The mechanical principle of EPSD was presented and a comparison was conducted between the theoretical formulas and finite element(FE) simulation of damper units.The verified force-displacement hysteretic curve of the damper system was obtained with reference to tests.The Nanjing Jiangxinzhou Bridge(NJB) was subsequently taken as the case to investigate the seismic response control effect of EPSDs on single-tower self-anchored suspension bridges.A 3-dimensional FE model of the bridge was established in ANSYS and the dynamic and static analyses of the bridge were conducted,the control effect of EPSDs under different seismic waves was further investigated through nonlinear time-history analysis based on the validated model.Results showed that both the simplified theoretical and FE simulation methods can preferable reflect the mechanical performance of EPSD,and that seismic responses of NJB with EPSDs are better than those with elastic connection device or fluid viscous damper.However,the control effect of EPSDs is influenced by seismic wave characteristics.

Calculation method on shape finding of self-anchored suspension bridge with spatial cables

Based on the spatial model,a reliable and accurate calculation method on the shape finding of self anchored suspension bridge with spatial cables was studiedin this paper.On the principle that the shape of the main cables between hangers is catenary,the iteration method of calculating the shapes of the spatial main cables under the load of hanger forces was deduced.The reasonable position of the saddle was determined according to the shape and the theoretical joint point of the main cables.The shapes of the main cables at completed cable stage werecalculated based on the unchanging principle of the zero-stress lengths of the main cables.By using a numerical method combining with the finite element method,one self-anchored suspension bridge with spatial cables was analyzed.The zero-stress length of the main cables,the position of the saddle,and the pre-offsetting of the saddle of the self-anchored suspension bridge were given.The reasonable shapes of the main cables at bridge completion stage and completed cable stage were presented.The results show that the shape-finding calculation method is effective and reliable.

Comprehensive Optimal Control on Seismic Response of a Single-Tower Self-Anchored Suspension Bridge

Earthquake may cause severe damage to all kinds of bridge such as the falling down of the girder; therefore,effective measures should be employed to control the seismic displacement. In this paper,the method of comprehensive optimal control,com-bined with analytic hierarchy process,is employed to investigate the seismic response control of the Nanjing Jiangxinzhou Bridge,which is a single-tower self-anchored suspension bridge （SSSB）. Also,3-dimensional nonlinear seismic response analyses are con-ducted. Three types of practical connection measures for seismic response control of SSSB are investigated,and the optimal pa-rameters of the connection devices are achieved by this method. Results show that both the elastic connection devices and the damp-ers with rational parameters can reduce the seismic displacement of the bridge effectively,but the elastic connection devices will in-crease the seismic force of the tower. When all factors are consid-ered,the optimal measure is by using the elastic connection devices and the dampers together. These results can provide references for seismic response control of SSSBs.

Multi-type sensor placement and response reconstruction for structural health monitoring of long-span suspension bridges

This study is devoted to the experimental validation of the multi-type sensor placement and response reconstruction method for structural health monitoring of long-span suspension bridges. The method for multi-type sensor placement and response reconstruction is briefly described. A test bed, comprising of a physical model and an updated finite element （P-E） model of a long-span suspension bridge is also concisely introduced. The proposed method is then applied to the test bed; the equation of motion of the test bed subject to ground motion, the objective function for sensor location optimization, the principles for mode selection and multi-type response reconstruction are established. A numerical study using the updated FE model is performed to select the sensor types, numbers, and locations. Subsequently, with the identified sensor locations and some practical considerations, fiber Bragg grating （FBG） sensors, laser displacement transducers, and accelerometers are installed on the physical bridge model. Finally, experimental investigations are conducted to validate the proposed method. The experimental results show that the reconstructed responses using the measured responses from the limited number of multitype sensors agree well with the actual bridge responses. The proposed method is validated to be feasible and effective for the monitoring of structural behavior of longspan suspension bridges.

Temperature-induced structural static responses of a long-span steel box girder suspension bridge

Temperature is a significant load on bridges,particularly for long-span steel box girder bridges.This study investigates the temperature-induced static responses of a long-span suspension bridge under real service environmental conditions using numerical simulations and field measurements.Detailed 2 D finite element(FE)models of a typical section for the box girder,main cable,hanger,tower column,and crossbeam are constructed.The thermal boundary conditions are determined strictly according to the surrounding environments of a typical sunny day and applied to the FE models.A transient heat-transfer analysis is performed and the time-dependent temperature and its distribution on the bridge are obtained.In addition,a fine,3 D FE model of the bridge is developed for a structural analysis.The calculated temperatures are applied to the 3 D model and the temperature-induced structural responses are simulated.The simulated temperatures and the associated static responses have good agreement with the measured counterparts and support the numerical simulation method.The main cable and bridge deck make the greatest contributions to the temperature effects on the suspension bridge.The static responses of bridge caused by the design vehicle load are also calculated.The daily variation of the temperature-induced static responses is comparable with,even higher than,that of the design vehicle load.

Aerodynamic stability evolution tendency of suspension bridges with spans from 1000 to 5000 m

Aerodynamic instability owing to aerostatic and flutter-related failures is a significant concern in the wind-resistant design of long-span suspension bridges.Based on the dynamic characteristics of suspension bridges with spans ranging from 888 to 1991 m,we proposed fitted equations for increasing spans and base frequencies.Finite element models of suspension bridges with increasing span from 1000 to 5000 m were constructed.The structural parameters were optimized to follow the fitted tendencies.To analyze the aerodynamic instability,streamlined single-box section(SBS),lattice truss section(LTS),narrow slotted section(NSS),and wide slotted section(WSS)were considered.We performed three-dimensional(3-D)full-mode flutter analysis and nonlinear aerostatic instability analysis.The flutter critical wind speed continuously decreases with span growth,showing an unlimited approaching phenomenon.Regarding aerostatic instability,the instability wind speed decreases with span to approximately 3000 m,and increases when the span is in the range of 3000 to 5000 m.Minimum aerostatic instability wind speed with SBS or LTS girder would be lower than observed maximal gust wind speed,indicating the probability of aerostatic instability.This study proposes that suspension bridge with span approximately 3000 m should be focused on both aerostatic instability and flutter,and more aerodynamic configuration optimistic optimizations for flutter are essential for super long-span suspension bridges with spans longer than 3000 m.

Experimental research on the multilayer compartmental particle damper and its application methods on long-period bridge structures

Particle damping technology has attracted extensive research and engineering application interest in the field of vibration control due to its prominent advantages, including wide working frequency bands, ease of installation, longer durability and insensitivity to extreme temperatures. To introduce particle damping technology to long-period structure seismic control, a novel multilayer compartmental particle damper (MCPD) was proposed, and a 1/20 scale test model of a typical long-period self-anchored suspension bridge with a single tower was designed and fabricated. The model was subjected to a series of shaking table tests with and without the MCPD. The results showed that the seismic responses of the flexible or semi-flexible bridge towers of long-period bridges influence the seismic responses of the main beam. The MCPD can be conveniently installed on the main beam and bridge tower and can effectively reduce the longitudinal peak displacement and the root mean square acceleration of the main beam and tower. In addition, no particle accumulation was observed during the tests. A well-designed MCPD can achieve significant damping for long-period structures under seismic excitations of different intensities. These results indicate that the application of MCPDs for seismic control of single-tower self-anchored suspension bridges and other long-period structures is viable.