Creep property research of new martensite heat-resistant steel G115

G115 steel was jointly developed by China Iron & Steel Research Institute Group Co.,Ltd.and Baosteel for usage in 600-650 ℃ ultrasupercritical boiler tubes.Using a hot extruded G115 tube,creep tests were conducted under a constant stress of 130 MPa and temperatures of 625,650 and 675 ℃.Comparing creep curves under different temperatures,it is observed that the creep performance of a G115 tube is more sensitive to temperature than stress.Steady-state creep rates of creep specimens are significantly increased by enhancing the temperature.A micro-structural analysis of ruptured creep specimens under a stress of 130 MPa and temperatures of 650 ℃ and 675 ℃ was performed;the fracture mechanism of creep specimens under these two temperatures mainly included the appearance of creep holes on the grain boundary and a decrease in the martensite lath density.

Magnesium-based nanocomposites:A review from mechanical,creep and fatigue properties

The addition of nanoscale additions to magnesium(Mg)based alloys can boost mechanical characteristics without noticeably decreasing ductility.Since Mg is the lightest structural material,the Mg-based nanocomposites(NCs)with improved mechanical properties are appealing materials for lightweight structural applications.In contrast to conventional Mg-based composites,the incorporation of nano-sized reinforcing particles noticeably boosts the strength of Mg-based nanocomposites without significantly reducing the formability.The present article reviews Mg-based metal matrix nanocomposites(MMNCs)with metallic and ceramic additions,fabricated via both solid-based(sintering and powder metallurgy)and liquid-based(disintegrated melt deposition)technologies.It also reviews strengthening models and mechanisms that have been proposed to explain the improved mechanical characteristics of Mg-based alloys and nanocomposites.Further,synergistic strengthening mecha-nisms in Mg matrix nanocomposites and the dominant equations for quantitatively predicting mechanical properties are provided.Furthermore,this study offers an overview of the creep and fatigue behavior of Mg-based alloys and nanocomposites using both traditional(uniaxial)and depth-sensing indentation techniques.The potential applications of magnesium-based alloys and nanocomposites are also surveyed.

Tailoring the microstructural characteristics and enhancing creep properties of as-cast Mg-5Bi-5Sn alloy through Mn addition

The creep properties, microstructural characteristics and creep mechanisms of as-cast Mg-5Bi-5Sn(BT55) alloy without and with Mn(BTM550) addition were investigated via creep at 423, 448, and 473 K as well as stresses of 30, 50 and 75 MPa. The results indicate that adding Mn can result in the formation of primary and the dynamic precipitated α-Mn phases. In addition, the morphology of the precipitated Mg_(3)Bi_(2) phase and the orientation relationship between Mg_(2)Sn precipitates and α-Mg can be effectively modified. Tailoring the microstructural characteristics is responsible for the improved creep performance of BTM550 alloy. The dominant creep mechanisms in BT55 and BTM550 alloys are dislocation cross-slip and climb, respectively. Furthermore, twinning and pyramidal slip play an assisting part in both alloys during creep process.

Effect of long-term thermal exposure on microstructure and creep properties of DD5 single crystal superalloy

The effect of thermal exposure on the microstructure and creep properties of the Ni-based single crystal superalloy in different test conditions was studied.Long-term exposure was performed at 1,000 ℃ and 1,100 ℃ for 500 h prior to the creep tests.The creep lifetime is found to be improved after the long-term exposure at 1,000 ℃ for 500 h as a result of the formation of secondary M_(23)C_(6) in the interdendritic region.The coarsening of γ’ precipitates accompanied by the formation of TCP phase lead to the degradation of alloy,which is responsible for the reduction of the creep lifetime of Ni-base single crystal superalloy after long-term exposure at 1,100 ℃ for 500 h.The creep lifetime of 1,000 oC thermally exposed sample under the conditions of 1,093 ℃/137 MPa is lower than that of heat-treated state.Thermal exposure at 1,100 ℃ for 500 h causes the creep lifetime to drop drastically.

Influence of long-term isothermal aging on microstructure and creep rupture properties of Ni-base superalloy M4706

After a standard heat treatment,the microstructural evolution with time during isothermal aging at 850°C and its effect on the creep rupture properties of the Ni-base superalloy M4706 at 870°C and 370 MPa are investigated.It is found that as the aging time increases from 0 to 5000 h,the average diameter of coarseγ′increases from 241 to 484 nm,and the distribution of the carbides at grain boundaries changes from discontinuous to continuous.Moreover,experimental observations on the microstructures of all the crept specimens reveal that dislocation bypassing controls the creep deformation.Thus,it is concluded that the transitions in the microstructures result in the degeneration of the creep rupture properties of the experimental alloy with aging time.

Effects of process parameters on mechanical properties and microstructures of creep aged 2124 aluminum alloy

A series of tests were carried microstructures of 2124 aluminum alloy in increase of aging time, temperature and low-to-peak-to-low manner. No significant out to investigate the effects of process parameters on mechanical properties and creep aging process. The results show that creep strain and creep rate increase with the applied stress. The hardness of specimen varies with aging time and stress in a effect of temperature on hardness of material is seen in the range of 185-195 ℃. The optimum mechanical properties are obtained at the conditions of （200 MPa, 185 ℃, 8 h） as the result of the coexistence of strengthening S＂ and S＇ phases in the matrix by transmission electron microscopy （TEM）. TEM observation shows that applied stress promotes the formation and growth of precioitates and no obvious stress orientation effect is observed in the matrix.

Creep properties and microstructure evolution of nickel-based single crystal superalloy at different conditions

The creep properties of nickel-based single crystal superalloy with [001] orientation was investigated at different test conditions. The microstructure evolution of γ′ phase, TCP phase and dislocation characteristic after creep rupture was studied by SEM and TEM. The results show that the alloy has excellent creep properties. Two different types of creep behavior can be shown in the creep curves. The primary creep is characterized by the high amplitude at test conditions of (760 °C, 600 MPa) and (850 °C, 550 MPa) and the primary creep strain is limited at (980 °C, 250 MPa), (1100 °C, 140 MPa) and (1120 °C, 120 MPa). A little change ofγ′precipitate morphology occurs at (760 °C, 600 MPa). The lateral merging of the γ′ precipitate has already begun at (850 °C, 550 MPa). Theγphase is surrounded by theγ′phase at (980 °C, 250 MPa). Theγphase is no longer continuous tested at (1070 °C, 140 MPa). At (1100 °C, 120 MPa), the thickness ofγphase continues to increase. No TCP phase precipitates in the specimens at (760 °C, 600 MPa), (850 °C, 550 MPa) and (980 °C, 250 MPa). Needle shaped TCP phase precipitates in the specimens tested at (1070 °C, 140 MPa) and (1100 °C, 120 MPa). The dislocation shear mechanism including stacking fault formation is operative at lower temperature and high stress. The dislocation by-passing mechanism occurs to form networks atγ/γ′interface under the condition of high temperature and lower stress.

Microstructure,mechanical properties and creep resistance of Mg-(8%-12%)Zn-(2%-6%) Al alloys

The microstructural characteristics, mechanical properties and creep resistance of Mg-（8%-12%） Zn-（2%-6%） A1 alloys were investigated to get a better overall understanding of these series alloys. The results indicate that the microstructure of the alloys ZA82, ZA102 and ZA122 with the mass ratio of Zn to A1 of 4-6 is mainly composed of a-Mg matrix and two different morphologies of precipitates （block τ-Mg32（Al, Zn）49 and dense lamellar ε-Mg51Zn20）, the alloys ZA84, ZA104 and ZA124 with the mass ratio of 2-3 contain α-Mg matrix and only block r phases, and the alloys ZA86, ZA106 and ZA126 with the mass ratio of 1-2 consist of a-Mg matrix, block r precipitates, lamellar Ф-Al2Mg5Zn2 eutectics and flocculent β-Mg17Al12 compounds. The alloys studied with the mass ratio of Zn to A1 of 2-3 exhibit high creep resistance, and the alloy ZA124 with the continuous network of r precipitating along grain boundaries shows the highest creep resistance.

IMPROVEMENT ON TENSILE PROPERTIES AND CREEP RESISTANCE OF Fe 3Al BASED ALLOYS

Effects of alloying processing on tensile test properties of Fe 3Al based alloys have been studied. Results show that microalloying of cerium is very effective on increasing the room temperature ductility of Fe 3Al based alloys. Surface analysis by XPS demonstrates that cerium addition causes the change in the oxide chemistry and provides rapid passivation of the specimen surface. The high temperature strength and creep resistance of Fe 3Al based alloys can be significantly enhanced by alloying additions of tungsten, niobium or molybdenum, especially when combined additions of tungsten with niobium or molybdenum are used. The additions of tungsten, niobium or molybdenum also result in the significant microstructural refinement and the formation of fine precipitates which are identified as M 6C type carbide in the alloys containing tungsten.

MECHANICAL PROPERTIES OF FINE PITCH DEVICES SOLDERED JOINTS BASED ON CREEP MODEL

Nonlinear analyses of quad flat package （QFP） on printed circuit board （PCB） assemblies subjected to thermal cycling conditions are presented. Two different solders are considered, namely, Sn37Pb and Sn3.5Ag. The stress and strain response of fine pitch devices soldered joints was investigated by using finite element method based on Garofalo-Arrheninus model. The simulated results indicate creep distribution of soldered joints is not uniform, the heel and toe of soldered joints, the area between soldered joints and leads are the creep concentrated sites. The similar phenomena of stress curves simulated based on Garofalo-Arrheninus model and Anand equations is confirmed, and the creep strain value of Sn3.5Ag soldered joints is lower than that of Sn37Pb soldered joints. Thermal cycling results show that Sn3.5Ag strongly outperforms Sn37Pb for QFP devices under the studied test condition. This is well matched with the experimental outcome analyzed. In addition, the soldered devices were tested by micro-joints tester, the tensile strength of Sn3.5Ag soldered joints is found to be higher than that of Sn37Pb soldered joints. By analyzing the fracture microstructure of soldered joints, it is found that fracture mechanism of Sn3.5Ag soldered joints is toughness fracture, while fracture mechanism of Sn37Pb soldered joints includes brittle fracture and toughness fracture. The results of this study provide an important basis of understanding the mechanical properties of fine pitch devices with traditional Sn37Pb and Sn3.5Ag lead-free soldered joints.

Effects of Long-Term Winter Planted Green Manure on Physical Properties of Reddish Paddy Soil Under a Double-Rice Cropping System

Soil physical properties are important indicators of the potential for agricultural production.Our objective was to evaluate the effects of long-term inputs of green manures on physical properties of a reddish paddy soil（Fe-Typic Hapli-Stagnic Anthrosols） under a double cropping system.The common cropping pattern before the study was early-late rice-fallow（winter）.The field treatments included rice-rice-fallow（R-R-WF）,rice-rice-rape（R-R-RP）,rice-rice-Chinese milk vetch（RR-MV）,and rice-rice-ryegrass（R-R-RG）.The rape,Chinese milk vetch and ryegrass were all incorporated as green manures 15 d before early rice transplanting during the following year.The soil bulk density in all green manure treatments was significantly reduced compared with the winter fallow treatment.Soil porosity with green manure applications was significantly higher than that under the winter fallow.The green manure treatments had higher 0.25-5 mm water stable aggregates and aggregates stabilities in the plow layer（0-15 cm depth） compared with the fallow treatment.The mean weight diameter（MWD） and normalized mean weight diameter（NMWD） of aggregates in the green manure treatment were larger than that with the winter fallow.Soil given green manure retained both a higher water holding capacity in the plow layer soil,and a larger volume of moisture at all matric potentials（-10,-33 and-100 kPa）.We conclude that the management of double-rice fields in southern central China should be encouraged to use green manures along with chemical fertilizers to increase SOC content,improve soil physical properties and soil fertility.

Fractional description of mechanical property evolution of soft soils during creep

The motion of pore water directly influences mechanical properties of soils, which are variable during creep. Accurate description of the evolution of mechanical properties of soils can help to reveal the internal behavior of pore water. Based on the idea of using the fractional order to reflect mechanical properties of soils, a fractional creep model is proposed by introducing a variable-order fractional operator, and realized on a series of creep responses in soft soils. A comparative analysis illustrates that the evolution of mechanical properties, shown through the simulated results, exactly corresponds to the motion of pore water and the solid skeleton. This demonstrates that the proposed variable-order fractional model can be employed to characterize the evolution of mechanical properties of and the pore water motion in soft soils during creep. It is observed that the fractional order from the proposed model is related to the dissipation rate of pore water pressure.

Creep properties and permeability evolution in triaxial rheological tests of hard rock in dam foundation

Triaxial creep tests were carried out under seepage pressure by using rock servo-controlled triaxial rheology testing equipment. Based on experimental results, rock rheological properties influenced by seepage-stress coupling were studied, and variations of seepage rate with time in complete creep processes of rock were analyzed. It is shown that, when the applied stress is less than failure stress level, the creep deformation is not obvious, and its main form is steady-state creep. When applied stress level is greater than or less than but close to fracture stress, it is easier to see the increase of creep deformation and the more obvious accelerative creep characteristics. The circumferential creep deformation is obviously higher than the axial creep deformation. At the stage of steady-state creep, the average of seepage flow rate is about 4.7×10-9 rn/s at confining pressure （tr3） of 2 MPa, and is about 3.9×10-9 m/s at a3 of 6 MPa. It is seen that the seepage flow rate at or3 of 2 MPa in this case is obviously larger than that at tr3 of 6 MPa. At the stage of creep acceleration, the seepage flow rate is markedly increased with the increase of time. The variation of rock permeability is directly connected to the growth and evolution of creep crack. It is suggested that the permeability coefficient in complete creep processes of rock is not a constant, but is a function of rock creep strain, confining pressure, damage variable and pore water pressure. The results can be considered to provide a reliable reference for the establishment of rock rheological model and parameter identification.

Elevated temperature endurance and creep properties of extruded 2D70 Al alloy rods

The elevated temperature performances of 2D70 Al alloy hot extrusion rods after two-stage homogenization and intensive deformation were studied by measuring the elevated temperature enduring strength and the creep ultimate strength. The fracture morphology of some selected samples after testing at different elevated temperatures was observed by scanning electron microscopy （SEM）. The results indicate that, as the test temperature increases, the elevated temperature enduring strength of 2D70 Al alloy decreases gradually. In a comparison between 150 C and 240 C, the notch enduring strength drops from 375 to 185 MPa and the smooth enduring strength drops from 337 to 130 MPa. Enduring strength is not sensitive to the notch. The notch sensitivity ratio （NSR） coefficient is in the range of 1.119 to 1.423 from 150 C to 240 C. The creep test results show that, as the test temperature increases from 150 C to 240 C, the creep ultimate strength of 2D70 Al alloy rods drops gradually from 312 to 117 MPa.

Experimental determination of mechanical properties and short-time creep of AISI 304 stainless steel at elevated temperatures

The high temperature properties of AISI 304 stainless steel were studied. Basic data about the employed experimental equipment, testing procedures, and specimen geometry were given. The experimental setup was used to obtain stress-strain diagrams from tensile tests at room temperature as well as several elevated temperatures. Furthermore, the specimens were subjected to short-time creep tests at various temperatures. Stress levels for creep testing were established as a percentage of yield stress. The results indicate that at lowered temperatures and lower stress levels, AISI 304 stainless steel can be used as a sufficiently creep resistant material.

Creep properties and resistivity-ultrasonic-AE responses of cemented gangue backfill column under high-stress area

To investigate the creep and instability properties of a cemented gangue backfill column under a highstress area,the uniaxial compression creep tests were conducted by single-step and multi-step loading of prismatic samples made of cemented gangue backfill material(CGBM)under the high stressstrength ratio.The creep damage was monitored using an electrical resistivity device,ultrasonic testing device,and acoustic emission(AE)instrument.The results showed that the CGBM sample has a creep hardening property.The creep failure strength(CFS)is slightly larger than the uniaxial compressive strength(UCS),ranging in ratio from 108.9%to 116.5%.The instantaneous strain,creep strain,and creep rate increase with increasing stress-strength ratio in the single-step loading creep tests.The instantaneous strain and creep strain decrease first and then increase during the multi-step loading creep process.The axial creep strain of the CGBM column can be expressed by the viscoelastic-plastic creep model.Creep instability is caused by the accumulation of strain energy under multi-step loading and the continuous lateral expansion at the unconstrained middle position during the creep process.The creep stability of a CGBM column in a high-stress area can be monitored based on the variation of electrical resistivity,ultrasonic pulse velocity(UPV),and AE signals.

Effect of Ca addition on the as-cast microstructure and creep properties of Mg-5Zn-5Sn magnesium alloy

The effect of Ca addition on the as-cast micmstructure and creep properties of Mg-5Zn-5Sn magnesium alloy was investigated. The results indicate that adding 1.0 wt.% Ca to Mg-5Zn-5Sn alloy can effectively refine the as-cast microstructure of the alloy, and the CaMgSn phase with high thermal stability is formed in the alloy. In addition, adding 1.0 wt.% Ca to Mg-5Zn-5Sn alloy can also improve the creep properties of the alloy. After adding 1.0 wt.% Ca to Mg-5Zn-5Sn alloy, the second creep rate of the alloy at 150℃ and 50 MPa for 100 h decreases from 4.67 ×10^-8 to 1.43 × 10^-8 s^-1. The strengthening mechanism is mainly attributed to the microstructural refinement and the formation of CaMgSn phase.

Creep behavior and mechanical properties of Al-Li-S4 alloy at different aging temperatures

Creep age forming techniques have been widely used in aerospace industries. In this study, we investigated the effect of aging temperature(143 °C-163 °C) on the creep behavior of Al-Li-S4 aluminum alloy and their mechanical properties at room temperature. The mechanical properties were tested by tensile testing, and the microstructural evolution at different aging temperatures was examined by transmission electron microscopy. Results show that the creep strains and the room-temperature mechanical properties after creep aging increase with the aging temperature. As the aging temperature increases, the creep strain increases from 0.018% at 143 °C to 0.058% at 153 °C, and then to 0.094% at 163 °C. Within 25 h aging, the number of creep steps increases and the duration time of the same steps is shortened with the growth of aging temperatures. Therefore, the increase in aging temperatures accelerates the progress of the entire creep. Two main strengthening precipitates θ′(Al2 Cu) and T1(Al2 Cu Li) phases were characterized. This work indicates that the creep strain and mechanical properties of Al-Li-S4 alloys can be improved by controlling aging temperatures.

Re-evaluation of the mechanical properties and creep resistance of commercial magnesium die-casting alloy AE44

This paper presents a re-evaluation of the room temperature mechanical properties and high temperature creep resistance of magnesium die-casting alloy AE44(Mg-4Al-4RE)in light of the influence of minor Mn addition.It is shown that the Mn-containing AE44 exhibits distinct age hardening response upon direct ageing(T5)due to the precipitation of nanoscale Al-Mn particles,as reported previously in a similar alloy.The T5 ageing leads to a significant improvement in strength with similar ductility.Consequently,the T5-aged AE44 has a remarkably better strength-ductility combination than most Mg die-casting alloys and even the Al die-casting alloy A380.Minor Mn addition is also shown to be critical for the creep resistance of AE44 whereas the influence of the RE constituent is not as significant as previously thought,which reaffirms that precipitation hardening of theα-Mg matrix is more important than grain boundary reinforcement by intermetallic phases for the creep resistance of die-cast Mg alloys.The findings in this work could provide new application perspectives for AE44,particularly in the automotive industry.

High temperature creep property of silicon particles reinforced high Al Zn based alloys

The deformation creep characteristics of as cast silicon particles reinforced zinc based alloys (Si/ZA27) were determined by high temperature creep experiments at 453 K and 61.1 MPa condition. The experimental results indicated that the minimum creep rate of the silicon containing alloys are about three fifth of that of the matrix alloy(ZA27). The deformation process is mainly controlled by grain boundary sliding mechanism. Both dislocation climb and disperse silicon phase are also contributed to it. Micro structural changes were investigated during the deformation experiments.