Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality thr...Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.展开更多
An analytical model is proposed to estimate the discontinuous mechanical behavior of an existing shield tunnel above a new tunnel. The existing shield tunnel is regarded as a Timoshenko beam with longitudinal joints. ...An analytical model is proposed to estimate the discontinuous mechanical behavior of an existing shield tunnel above a new tunnel. The existing shield tunnel is regarded as a Timoshenko beam with longitudinal joints. The opening and relative dislocation of the longitudinal joints can be calculated using Dirac delta functions. Compared with other approaches, our method yields results that are consistent with centrifugation test data. The effects of the stiffness reduction at the longitudinal joints (α and β), the shearing stiffness of the Timoshenko beam GA, and different additional pressure profiles on the responses of the shield tunnel are investigated. The results indicate that our proposed method is suitable for simulating the discontinuous mechanical behaviors of existing shield tunnels with longitudinal joints. The deformation and internal forces decrease as α, β, and GA increase. The bending moment and shear force are discontinuous despite slight discontinuities in the deflection, opening, and dislocation. The deflection curve is consistent with the additional pressure profile. Extensive opening, dislocation, and internal forces are induced at the location of mutation pressures. In addition, the joints allow rigid structures to behave flexibly in general, as well as allow flexible structures to exhibit locally rigid characteristics. Owing to the discontinuous characteristics, the internal forces and their abrupt changes at vulnerable sections must be monitored to ensure the structural safety of existing shield tunnels.展开更多
For a longitudinal welded joint, the tensile residual stresses are as high as the yield stress of the metal, so that the weld toes are sensitive to fatigue load. In this case a low transformation temperature electrode...For a longitudinal welded joint, the tensile residual stresses are as high as the yield stress of the metal, so that the weld toes are sensitive to fatigue load. In this case a low transformation temperature electrode (LTTE) is one of the most useful methods used to improve the fatigue strength of the longitudinal welded joint, because the tensile residual stress is reduced or changed into compressive stress. Three kinds of longitudinal welded joints were selected to conduct fatigue tests. The tests results show that the fatigue strengths at 2×10 6 cycles of the joints welded with LTTE were improved by 41%, 47% and 59% respectively compared with those of the joints welded with E5015, and the fatigue lives at 162 MPa were improved by 9.9 times, 9.6 times and 46.8 times respectively. Furthermore, the LTTE method is not necessary to add process after welding and so that it can be valuable method to improve the fatigue performance of longitudinal welded joints.展开更多
文摘Longitudinal joint construction quality is critical to the life of flexible pavements.Maintaining deteriorated longitudinal joints has become a challenge for many highway agencies.Improving the joint's quality through better compaction during construction can help achieve flexible pavements with longer service lives and less maintenance.Current quality control(QC)and quality assurance(QA)plans provide limited coverage.Consequently,the risk of missing areas with poor joint compaction is significant.A density profiling system(DPS)is a non-destructive alternative to conventional destructive evaluation methods.It can provide quick and continuous real-time coverage of the compaction during construction in dielectrics.The paper presents several case studies comparing various types of longitudinal joints and demonstrating the use of DPS to evaluate the joint's compaction quality.The paper shows that dielectric measurements can provide valuable insight into the ability of various construction techniques to achieve adequate levels of compaction at the longitudinal joint.The paper proposes a dielectric-based longitudinal joint quality index(LJQI)to evaluate the relative compaction of the joint during construction.It also shows that adopting DPS for assessing the compaction of longitudinal joints can minimize the risk of agencies accepting poorly constructed joints,identify locations of poor quality during construction,and achieve better-performing flexible pavements.
基金supported by the National Natural Science Foundation of China(Grant No.52108363)Postdoctoral Science Foundation of China(No.2021M700654)+2 种基金Fundamental Research Funds for the Central Universities(No.3132022175)Key Laboratory of Urban Underground Engineering of Ministry of Education,Beijing Jiaotong University(No.TUL2022-01)Liaoning Revitalization Talents Program(No.XLYC1905015).
文摘An analytical model is proposed to estimate the discontinuous mechanical behavior of an existing shield tunnel above a new tunnel. The existing shield tunnel is regarded as a Timoshenko beam with longitudinal joints. The opening and relative dislocation of the longitudinal joints can be calculated using Dirac delta functions. Compared with other approaches, our method yields results that are consistent with centrifugation test data. The effects of the stiffness reduction at the longitudinal joints (α and β), the shearing stiffness of the Timoshenko beam GA, and different additional pressure profiles on the responses of the shield tunnel are investigated. The results indicate that our proposed method is suitable for simulating the discontinuous mechanical behaviors of existing shield tunnels with longitudinal joints. The deformation and internal forces decrease as α, β, and GA increase. The bending moment and shear force are discontinuous despite slight discontinuities in the deflection, opening, and dislocation. The deflection curve is consistent with the additional pressure profile. Extensive opening, dislocation, and internal forces are induced at the location of mutation pressures. In addition, the joints allow rigid structures to behave flexibly in general, as well as allow flexible structures to exhibit locally rigid characteristics. Owing to the discontinuous characteristics, the internal forces and their abrupt changes at vulnerable sections must be monitored to ensure the structural safety of existing shield tunnels.
文摘For a longitudinal welded joint, the tensile residual stresses are as high as the yield stress of the metal, so that the weld toes are sensitive to fatigue load. In this case a low transformation temperature electrode (LTTE) is one of the most useful methods used to improve the fatigue strength of the longitudinal welded joint, because the tensile residual stress is reduced or changed into compressive stress. Three kinds of longitudinal welded joints were selected to conduct fatigue tests. The tests results show that the fatigue strengths at 2×10 6 cycles of the joints welded with LTTE were improved by 41%, 47% and 59% respectively compared with those of the joints welded with E5015, and the fatigue lives at 162 MPa were improved by 9.9 times, 9.6 times and 46.8 times respectively. Furthermore, the LTTE method is not necessary to add process after welding and so that it can be valuable method to improve the fatigue performance of longitudinal welded joints.