To develop vortex generator jet （VGJ） method for flow control, the turbulence flow in a 14° conical diffuser with and without vortex generator jets are simulated by solving Navier-Stokes equations with k-ε tur...To develop vortex generator jet （VGJ） method for flow control, the turbulence flow in a 14° conical diffuser with and without vortex generator jets are simulated by solving Navier-Stokes equations with k-ε turbulence model. The diffuser performance, based on different velocity ratio （ratio of the jet speed to the mainstream velocity）, is investigated and compared with the experimental study. On the basis of the flow characteristics using computation fluid dynamics （CFD） method observed in the conical diffuser and the downstream development of the longitudinal vortices, attempt is made to correlate the pressure recovery coefficient with the behavior of vortices produced by vortex generator jets.展开更多
The paper describes the effects of heat transfer enhancement and gas-flow characteristics by wing-type-vortex-generators inside a rectangular gas-flow duct of a plate-fin structure exhaust gas recirculation (EGR) cool...The paper describes the effects of heat transfer enhancement and gas-flow characteristics by wing-type-vortex-generators inside a rectangular gas-flow duct of a plate-fin structure exhaust gas recirculation (EGR) cooler used in a cooled-EGR system. The analyses are conducted using computational fluid dynamics (CFD). The numerical modelling is designed as a gas-flow rectangular duct of an EGR cooler using two fluids with high temperature gas and coolant water whose flow directions are opposite. The gas-flow duct used to separate two fluids is assembled with a stainless steel material. The inlet temperature and velocity of gas flowed inside gas-flow duct are 400°C and 30 m/s, respectively. Coolant water is flowed into two ducts on both a top and a bottom surface of the gas-flow duct, and the inlet temperature and velocity is 80°C and 0.6 m/s, respectively. Wing-type-vortex-generators are designed to achieve good cooling performance and low pressure drop and positioned at the center of the gas-flow duct with angle of inclination from 30 to 150 degrees at every 15 degrees. The temperature distributions and velocity vectors gained from numerical results were compared, and discussed. As a result, it is found that the vortices guided in the proximity of heat transfer surfaces play an important role in the heat transfer enhancement and low pressure drop. The collapse of the vortices is caused by complicated flow induced in the corner constituted by two surfaces inside gas-flow duct.展开更多
Acid condensation rate is an important factor denoting the acid corrosion, and the reduction of the acid condensation can significantly relieve the acid corrosive effect on the wall surface and improve the security of...Acid condensation rate is an important factor denoting the acid corrosion, and the reduction of the acid condensation can significantly relieve the acid corrosive effect on the wall surface and improve the security of the equipments. In this study, the characteristics of both heat transfer and acid condensation of the finned tube in heat exchanger were numerically studied. In the numerical model, we simulated the acid condensation by considering the vapor–liquid equilibrium effect and multi-component diffusion effect. Based on the H-type finned oval tube, we proposed three novel types of fins to both enhance the heat transfer and reduce the acid condensation. The parametric effects of gas temperature, acid vapor concentration, water vapor concentration, and Reynolds number were investigated on different fin structures. The results show that the tube bank with the new structured fins can improve the performance on both heat transfer and acid anticondensation.展开更多
基金This project is supported by Scientific Research Foundation of Ministry of Education of China for Returnee.
文摘To develop vortex generator jet （VGJ） method for flow control, the turbulence flow in a 14° conical diffuser with and without vortex generator jets are simulated by solving Navier-Stokes equations with k-ε turbulence model. The diffuser performance, based on different velocity ratio （ratio of the jet speed to the mainstream velocity）, is investigated and compared with the experimental study. On the basis of the flow characteristics using computation fluid dynamics （CFD） method observed in the conical diffuser and the downstream development of the longitudinal vortices, attempt is made to correlate the pressure recovery coefficient with the behavior of vortices produced by vortex generator jets.
文摘The paper describes the effects of heat transfer enhancement and gas-flow characteristics by wing-type-vortex-generators inside a rectangular gas-flow duct of a plate-fin structure exhaust gas recirculation (EGR) cooler used in a cooled-EGR system. The analyses are conducted using computational fluid dynamics (CFD). The numerical modelling is designed as a gas-flow rectangular duct of an EGR cooler using two fluids with high temperature gas and coolant water whose flow directions are opposite. The gas-flow duct used to separate two fluids is assembled with a stainless steel material. The inlet temperature and velocity of gas flowed inside gas-flow duct are 400°C and 30 m/s, respectively. Coolant water is flowed into two ducts on both a top and a bottom surface of the gas-flow duct, and the inlet temperature and velocity is 80°C and 0.6 m/s, respectively. Wing-type-vortex-generators are designed to achieve good cooling performance and low pressure drop and positioned at the center of the gas-flow duct with angle of inclination from 30 to 150 degrees at every 15 degrees. The temperature distributions and velocity vectors gained from numerical results were compared, and discussed. As a result, it is found that the vortices guided in the proximity of heat transfer surfaces play an important role in the heat transfer enhancement and low pressure drop. The collapse of the vortices is caused by complicated flow induced in the corner constituted by two surfaces inside gas-flow duct.
基金supported by the National Basic Research Program of China(2011CB710702)the National Natural Science Foundation of China(51222604)
文摘Acid condensation rate is an important factor denoting the acid corrosion, and the reduction of the acid condensation can significantly relieve the acid corrosive effect on the wall surface and improve the security of the equipments. In this study, the characteristics of both heat transfer and acid condensation of the finned tube in heat exchanger were numerically studied. In the numerical model, we simulated the acid condensation by considering the vapor–liquid equilibrium effect and multi-component diffusion effect. Based on the H-type finned oval tube, we proposed three novel types of fins to both enhance the heat transfer and reduce the acid condensation. The parametric effects of gas temperature, acid vapor concentration, water vapor concentration, and Reynolds number were investigated on different fin structures. The results show that the tube bank with the new structured fins can improve the performance on both heat transfer and acid anticondensation.
