Research of NO_(2) vertical profiles with look-up table method based on MAX-DOAS

Obtaining the vertical distribution profile of trace gas is of great significance for studying the diffusion procedure of air pollution.In this article,a look-up table method based on multi-axis differential optical absorption spectroscopy(MAX-DOAS)technology is established for retrieving the tropospheric NO_(2) vertical distribution profiles.This method retrieves the aerosol extinction profiles with minimum cost function.Then,the aerosol extinction profiles and the atmospheric radiation transfer model(RTM)are employed to establish the look-up table for retrieving the NO_(2) vertical column densities(VCDs)and profiles.The measured NO_(2) differential slant column densities(DSCDs)are compared with the NO_(2) DSCDs simulated by the atmospheric RTM,and the NO_(2) VCDs,the weight factor of NO_(2) in the boundary layer,and the boundary layer height are obtained by the minimization process.The look-up table is established to retrieve NO_(2) VCDs based on MAX-DOAS measurements in Huaibei area,and the results are compared with the data from Copernicus Atmospheric Monitoring Service(CAMS)model.It is found that there are nearly consistent and the correlation coefficient R2 is more than 0.86.The results show that this technology provides a more convenient and accurate retrieval method for the stereoscopic monitoring of atmospheric environment.

Accelerated generation of holograms with ultra-low memory symmetrically high-compressed look-up table

Computer-generated holography technology has been widely applied,and as research in this field deepens,the demand for memory and computational power in small AR and VR devices continues to increase.This paper presents a hologram generation method,i.e.,a symmetrically high-compressed look-up table method,which can reduce memory usage by50%.In offline computing,half of the basic horizontal and vertical modulation factors are stored,halving the memory requirements without affecting inline speed.Currently,its potential extends to various holographic applications,including the production of optical diffraction elements.

A general purpose exact Rayleigh scattering look-up table for ocean color remote sensing

The current exact Rayleigh scattering calculation of ocean color remote sensing uses the look-up table （LUT）, which is usually created for a special remote sensor and cannot be applied to other sensors. For practical application, a general purpose Rayleigh scattering LUT which can be applied to all ocean color remote sensors is generated. An adding-doubling method to solve the vector radiative transfer equation in the plane-parallel atmosphere is deduced in detail. Compared with the exact Rayleigh scattering radiance derived from the MODIS exact Rayleigh scattering LUT, it is proved that the relative error of Rayleigh scattering calculation with the adding-doubling method is less than 0.25%, which meets the required accuracy of the atmospheric correction of ocean color remote sensing. Therefore, the adding-doubling method can be used to generate the exact Rayleigh scattering LUT for the ocean color remote sensors. Finally, the general purpose exact Rayleigh scattering LUT is generated using the adding-doubling method. On the basis of the general purpose LUT, the calculated Rayleigh scattering radiance is tested by comparing with the LUTs ofMODIS, SeaWiFS and the other ocean color sensors, showing that the relative errors are all less than 0.5%, and this general purpose LUT can be applied to all ocean color remote sensors.

Fine Doppler shift acquisition algorithm for BeiDou software receiver by a look-up table

The BeiDou software receiver uses the fast Fourier transform(FFT)to perform the acquisition.The Doppler shift estimation accuracy should be less than 500 Hz to ensure satellite signals to enter a locked state in the tracking loop.Since the frequency step is usually 500 Hz or larger,the Doppler shift estimation accuracy cannot guarantee that satellite signals are brought into a stable tracking state.The straightforward solutions consist in increasing the sampling time and using zero-padding to improve the frequency resolution of the FFT.However,these solutions intensify the complexity and amount of computation.The contradiction between the acquisition accuracy and the computational load leads us to research for a more simple and effective algorithm,which achieves fine acquisition by a look-up table.After coarse acquisition using the parallel frequency acquisition(PFA)algorithm,the proposed algorithm optimizes the Doppler shift estimation through the look-up table method based on the FFT results to improve the acquisition accuracy of the Doppler shift with a minimal additional computing load.When the Doppler shift is within the queryable range of the table,the proposed algorithm can improve the Doppler shift estimation accuracy to 50 Hz for the BeiDou B1I signal.

Performance of global look-up table strategy in digital image correlation with cubic B-spline interpolation and bicubic interpolation

Global look-up table strategy proposed recently has been proven to be an efficient method to accelerate the interpolation, which is the most time-consuming part in the iterative sub-pixel digital image correlation （DIC） algorithms. In this paper, a global look-up table strategy with cubic B-spline interpolation is developed for the DIC method based on the inverse compositional Gauss-Newton （IC-GN） algorithm. The performance of this strategy, including accuracy, precision, and computation efficiency, is evaluated through a theoretical and experimental study, using the one with widely employed bicubic interpolation as a benchmark. The global look-up table strategy with cubic B-spline interpolation improves significantly the accuracy of the IC-GN algorithm-based DIC method compared with the one using the bicubic interpolation, at a trivial price of computation efficiency.

WinoNet:Reconfigurable look-up table-based Winograd accelerator for arbitrary precision convolutional neural network inference

To solve the hardware deployment problem caused by the vast demanding computational complexity of convolutional layers and limited hardware resources for the hardware network inference,a look-up table(LUT)-based convolution architecture built on a field-programmable gate array using integer multipliers and addition trees is used.With the help of the Winograd algorithm,the optimization of convolution and multiplication is realized to reduce the computational complexity.The LUT-based operator is further optimized to construct a processing unit(PE).Simultaneously optimized storage streams improve memory access efficiency and solve bandwidth constraints.The data toggle rate is reduced to optimize power consumption.The experimental results show that the use of the Winograd algorithm to build basic processing units can significantly reduce the number of multipliers and achieve hardware deployment acceleration,while the time-division multiplexing of processing units improves resource utilization.Under this experimental condition,compared with the traditional convolution method,the architecture optimizes computing resources by 2.25 times and improves the peak throughput by 19.3 times.The LUT-based Winograd accelerator can effectively solve the deployment problem caused by limited hardware resources.

Study on the methods to calculate the numbers of elements in every period in the periodic table

The previous methods of figuring the numbers of chemical elements is summed up in this paper. Based on that, another two creative calculative methods are introduced as well.

Mapping of the Water Table Levels of Unconfined Aquifers Using Two Interpolation Methods

The spatial prediction of the water table can be used for many applications related to civil works (foundations, excavations) and other urban and environmental management activities. Deterministic and geostatistical interpolation methods were used to predict the spatial distribution of water table levels (unconfined aquifers) of important geological formations of the Joao Pessoa City (capital of Paraiba State, Brazil) with dense urban occupation and high demand for new civil works. The deterministic (topo to raster) and geostatistical (ordinary kriging) interpolation methods were evaluated using a Geographic Information System (GIS)-based investigation. The water table levels were obtained from 276 boring logs of Standard Penetration Test (SPT) in situ investigation distributed over the geological formations studied (an area of 59.8 km2, covering 40 districts of the Joao Pessoa City). The Nspt values and textural characterization data are stored for levels of 1 m depth. Some boreholes located in the area investigated were not included in the interpolation processes in order to be compared with estimated values (validation of the results). Maps of the water table depths were also produced to further analyze the quality of the water table surfaces interpolated by both methods. The phreatic surface interpolations provided satisfactory results for both methods (RMSE = 1.8 m). The topo to raster method showed a slight general tendency to be less affected by local values in relation to the kriging method and also has the advantage of integrating the drainage flow system, which is a relevant aspect for spatial models of the water table levels of unconfined aquifers. The ordinary kriging (geostatistical method) provides a prediction surface and some measure of the certainty or accuracy of the predictions.

Seismic response of underground utility tunnels: shaking table testing and FEM analysis

Underground utility tunnels are widely used in urban areas throughout the world for lifeline networks due to their easy maintenance and environmental protection capabilities. However, knowledge about their seismic performance is still quite limited and seismic design procedures are not included in current design codes. This paper describes a series of shaking table tests the authors performed on a scaled utility tunnel model to explore its performance under earthquake excitation. Details of the experimental setup are first presented focusing on aspects such as the design of the soil container, scaled structural model, sensor array arrangement and test procedure. The main observations from the test program, including structural response, soil response, soil-structure interaction and earth pressure, are summarized and discussed. Further, a finite element model （FEM） of the test utility tunnel is established where the nonlinear soil properties are modeled by the Drucker- Prager constitutive model; the master-slave surface mechanism is employed to simulate the soil-structure dynamic interaction; and the confining effect of the laminar shear box to soil is considered by proper boundary modeling. The results from the numerical model are compared with experiment measurements in terms of displacement, acceleration and amplification factor of the structural model and the soil. The comparison shows that the numerical results match the experimental measurements quite well. The validated numerical model can be adopted for further analysis.

Numerical simulations of shake-table experiment for dynamic soil-pile-structure interaction in liquefi able soils

A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to simulate the experiment. A recently developed multi-surface elasto-plastic constitutive model and a fully coupled dynamic inelastic FE formulation(u-p) are used to model the liquefaction behavior of the sand. The soil domains are discretized using a solid-fl uid fully coupled(u-p) 20-8 noded brick element. The pile is simulated using beam-column elements. Upon careful calibration, very good agreement is obtained between the computed and the measured dynamic behavior of the ground and the pile. A parametric analysis is also conducted on the model to investigate the effect of pile-pinning, pile diameter, pile stiffness, ground inclination angle, superstructure mass and pile head restraints on the ground improvement. It is found that the pile foundation has a noticeable pinning effect that reduces the lateral soil displacement. It is observed that a larger pile diameter and fi xed pile head restraints contribute to decreasing the lateral pile deformation; however, a higher ground inclination angle tends to increase the lateral pile head displacements and pile stiffness, and superstructure mass seems to effectively infl uence the lateral pile displacements.

Seismic effectiveness evaluation and optimized design of tie up method for securing museum collections

To quantify the seismic effectiveness of the most commonly used fishing line tie up method for securing museum collections and optimize fixed strategies for exhibitions,shaking table tests of the seismic systems used for typical museum collection replicas have been carried out.The influence of body shape and fixed measure parameters on the seismic responses of replicas and the interaction behavior between replicas and fixed measures have been explored.Based on the results,seismic effectiveness evaluation indexes of the tie up method are proposed.Reasonable suggestions for fixed strategies are given,which provide a basis for the exhibition of delicate museum collections considering the principle of minimizing seismic responses and intervention.The analysis results show that a larger ratio of height of mass center to bottom diameter led to more intense rocking responses.Increasing the initial pretension of fishing lines was conducive to reducing the seismic responses and stress variation of the lines.Through comprehensive consideration of the interaction forces and effective securement,it is recommended to apply 20%of breaking stress as the initial pretension.For specific museum collections that cannot be effectively protected by the independent tie up method,an optimized strategy of a combination of fishing lines and fasteners is recommended.

Stable Routh-Padé-type approximation in model reduction of interval systems

An interval Pade-type approximation is introduced and then Routh-Pade-type method （IRPTM） is presented to model reduction in interval systems. The denominator in reduced model is obtained from the stable Routh table, and its numerator is constructed by the interval Pade-type definition. Compared to the existing Routh-Pade method, IRPTM does not need to solve linear interval equations theoretical analysis shows that IRPTM has example is given to illustrate our method. Hence, we do not have to compute smaller computational cost than that interval division in the process. Moreover, of Routh-Pade method. A typical numerical

Synthesis of Water Utilization System Using Concentration Interval Analysis Method （ Ⅰ ） Non-Mass-Transfer-Based Operation

A strategy for water and wastewater minimization is developed for continuous water utilization systems involving fixed flowrate(non-mass-transfer-based)operations,based on the fictitious operations that is introduced to represent the water losing and/or generating operations and a modified concentration interval analysis(MCIA) technique.This strategy is a simple,nongraphical,and noniterative procedure and is suitable for the quick yields of targets and the identification of pinch point location.Moreover,on the basis of the target method,a heuristic-based approach is also presented to generate water utilization networks,which could be demonstrated to be optimum ones. The proposed approaches are illustrated with example problems.

Simple Method for Dynamic Responses of Soil-Pile-Isolated Structure Interaction System

To investigate the effect of soil-pile-structure interaction(SPSI effect)on the dynamic response of a baseisolated structure with buried footings on a pile foundation,certain shake table tests are previously conducted.Based on the test results and the existing related studies,an efficient simplified model and a corresponding calculation method are verified for estimating the dynamic characteristics of a base-isolated structure with buried footings on a pile foundation with the SSI effect.In this method,the solutions by Veletsos and co-workers for a non-isolated structure with the SSI effect are verified and advanced for a base-isolated structure,and the solutions by Maravas and co-workers for a non-isolated structure on a pile foundation are introduced to consider the effect of the piles.By comparison with the shake table test,this work proves that the simplified method can efficiently estimate the dynamic responses of a base-isolated structure with buried footings on a pile foundation.Using parameter analysis,this work also shows that the dynamic characteristics of a non-isolated structure are quite similar to those of the base-isolated structure when the soil foundation is sufficiently soft,which means that the isolation layer gradually loses its isolation function as the soil foundation softens.

A Discrete Newton's Method for Gain Based Predistorter

Gain based predistorter (PD) is a highly effective and simple digital baseband predistorter which compensates for the nonlinear distortion of PAs. Lookup table (LUT) is the core of the gain based PD. This paper presents a discrete Newton’s method based adaptive technique to modify LUT. We simplify and convert the hardship of adaptive updating LUT to the roots finding problem for a system of two element real equations on athematics. And we deduce discrete Newton’s method based adaptive iterative formula used for updating LUT. The iterative formula of the proposed method is in real number field, but secant method previously published is in complex number field. So the proposed method reduces the number of real multiplications and is implemented with ease by hardware. Furthermore, computer simulation results verify gain based PD using discrete Newton’s method could rectify nonlinear distortion and improve system performance. Also, the simulation results reveal the proposed method reaches to the stable statement in fewer iteration times and less runtime than secant method.

Risk Assessment Framework and Algorithm of Power Systems Based on the Partitioned Multi-objective Risk Method

针对平均风险指标无法区分高损失-低概率事件及低损失-高概率事件的缺点,提出了电力系统的分割多目标风险分析框架。该框架将电力系统的风险状态细分为低损失、中等损失和高损失3个风险范围,并提出3个损失范围条件风险函数和条件风险概率的概念。采用经典的容量停运表模型,建立了这些条件期望指标的计算方法。对IEEE-RTS及TH-RTS2000系统进行了分割多目标风险评估,研究不同负荷水平下系统风险在3个损失范围的分布及转移情况,并分析损失分割点对系统风险的影响。通过分割多目标风险分析,风险分析者和决策者可以权衡系统的平均风险以及高、中、低损失范围的条件期望风险,从而对系统的风险状况有一个全面和深入的了解。

Synthesis of Water Utilization System Using Concentration Interval Analysis Method （Ⅱ） Discontinuous Process

The first part of the series of this article proposed a systematic method for the synthesis of continuous water-using system involving both non-mass-transfer-based and mass-transfer-based operations.This article,by ex- tending the method,proposes a time-dependent concentration interval analysis(CIA)method to solve the problems associated with the synthesis of discontinuous or batch water-using systems involving both non-mass-transfer-based and mass-transfer-based operation.This method can effectively identify the possibility of water reuse and the amount of water reused under time constraints for minimizing the consumption of freshwater in single or repeated batch/discontinuous water-using systems.Moreover,on the basis of the heuristic method adapted from concentra- tion interval analysis method for the continuous process network design,the network design for the discontinuous or batch process can be obtained through the designs for every time interval.Case study illustrates that the method presented in this article can simultaneously minimize the freshwater consumption in single or repeated batch/discontinuous water system and can determine a preferable storage tank capacity for some problems.

Determining the Basaltic Sequence Using Seismic Reflection and Resistivity Methods

This study was carried out in Harat Rahat (south of Almadinah Almonwarah) using seismic reflection and resistivity methods. The main objectives of this study are to determine the extent of the basaltic layer and to define the subsurface faults and fractures that could affect and control the groundwater movement in the study area. A 2D seismic profile was acquired and the result shows that the subsurface in the study area has a major fault. We obtained a well match when the seismic result was compared with drilled wells. As a complementary tool, the resistivity method was applied in order to detect the groundwater level. The results of the resistivity method showed that six distinct layers have been identified. The interpretation of these six layers show that the first three layers, the fourth layer, the fifth layer and the bottom of the section indicated various subsurface structures and lithologies;various basaltic layers, fractured basalt, weathered basement and fresh basaltic layers, respectively. It is obvious that the eventual success of geophysical surveys depend on the combination with other subsurface data sources in order to produce accurate maps.

Mathematical Programming Method as a Means of Calibration of NIR Analyzers

In addition to the conventional methods of the calibration model construction, such as PCR （principal components regression） and PLS （partial least-squares）, a MPM （mathematical programming method） is developed and proposed for practical use in NIR analyses of agricultural and food products. The proposed method involves the mathematical programming techniques to seek the regression coefficients for the calibration model calculation. It is based on the optimization theory used for finding the extremum of the objective function in the given domain of a vector space and employs the method of the complementarity problems solving. The MPM algorithm is described in detail. The MPM was tested on an InfraLUM FT-10 NIR analyzer of Lumex company with samples of dry milk （for fat）, corn （for protein） and rye flour （for moisture）. The obtained results show that the MPM can be used for constructing multivariate calibrations with the qualitative characteristics superior over those of the classical PCR and PLS methods of analysis.

A Novel Hybrid Encryption Method Based on Honey Encryption and Advanced DNA Encoding Scheme in Key Generation

Nowadays, increased information capacity and transmission processes make information security a difficult problem. As a result, most researchers employ encryption and decryption algorithms to enhance information security domains. As it progresses, new encryption methods are being used for information security. In this paper, a hybrid encryption algorithm that combines the honey encryption algorithm and an advanced DNA encoding scheme in key generation is presented. Deoxyribonucleic Acid (DNA) achieves maximal protection and powerful security with high capacity and low modification rate, it is currently being investigated as a potential carrier for information security. Honey Encryption (HE) is an important encryption method for security systems and can strongly prevent brute force attacks. However, the traditional honeyword encryption has a message space limitation problem in the message distribution process. Therefore, we use an improved honey encryption algorithm in our proposed system. By combining the benefits of the DNA-based encoding algorithm with the improved Honey encryption algorithm, a new hybrid method is created in the proposed system. In this paper, five different lookup tables are created in the DNA encoding scheme in key generation. The improved Honey encryption algorithm based on the DNA encoding scheme in key generation is discussed in detail. The passwords are generated as the keys by using the DNA methods based on five different lookup tables, and the disease names are the input messages that are encoded by using the honey encryption process. This hybrid method can reduce the storage overhead problem in the DNA method by applying the five different lookup tables and can reduce time complexity in the existing honey encryption process.