Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link v...Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link voltage and the traction power of the motor are significantly reduced, resulting in decreased traction efficiency due to the low load and low speed operations. Aiming to tackle this problem, a novel efficiency improved control method is introduced to the emergency mode of high-speed train traction system in this paper. In the proposed method, a total loss model of induction motor considering the behaviors of both iron and copper loss is established. An improved iterative algorithm with decreased computational burden is then introduced, resulting in a fast solving of the optimal flux reference for loss minimization at each control period. In addition, considering the parameter variation problem due to the low load and low speed operations, a parameter estimation method is integrated to improve the controller's robustness. The effectiveness of the proposed method on efficiency improvement at low voltage and low load conditions is demonstrated by simulated and experimental results.展开更多
Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available m...Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available methods. Secondly, the low-frequency ripple torque due to decrease of rotor flux was compensated in a feedforward manner. If load torque or speed command changed, the efficiency search algorithm would be abandoned and the rated flux would be established to get the best transient response. The close agreement between the simulation and the experimental results confirmed the validity and usefulness of the proposed techniques.展开更多
基金supported in part by the Science Foundation of the Chinese Academy of Railway Sciences under Grant Number:2023QT001。
文摘Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link voltage and the traction power of the motor are significantly reduced, resulting in decreased traction efficiency due to the low load and low speed operations. Aiming to tackle this problem, a novel efficiency improved control method is introduced to the emergency mode of high-speed train traction system in this paper. In the proposed method, a total loss model of induction motor considering the behaviors of both iron and copper loss is established. An improved iterative algorithm with decreased computational burden is then introduced, resulting in a fast solving of the optimal flux reference for loss minimization at each control period. In addition, considering the parameter variation problem due to the low load and low speed operations, a parameter estimation method is integrated to improve the controller's robustness. The effectiveness of the proposed method on efficiency improvement at low voltage and low load conditions is demonstrated by simulated and experimental results.
文摘Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available methods. Secondly, the low-frequency ripple torque due to decrease of rotor flux was compensated in a feedforward manner. If load torque or speed command changed, the efficiency search algorithm would be abandoned and the rated flux would be established to get the best transient response. The close agreement between the simulation and the experimental results confirmed the validity and usefulness of the proposed techniques.
