Effect of optical losses on the transmission performance of a radio-over-fiber distributed antenna system

The effects of optical losses oil a directly-modulated radio-over-fiber （RoF） system used for distributed antenna networks are determined. The results show that with a properly designed bidirectional amplifier, the RoF link can tolerate over 20 and 16 dB of optical losses for down- and up-links, respectively. Simulation results are also consistent with the experimental data. These findings can contribute to tile design of RoF distributed antenna systems with different topologies.

Global parameter estimation of the Cochlodinium polykrikoides model using bioassay data

Cochlodinium polykrikoides is a notoriously harmful algal species that inflicts severe damage on the aquacultures of the coastal seas of Korea and Japan. Information on their expected movement tracks and boundaries of influence is very useful and important for the effective establishment of a reduction plan. In general, the information is supported by a red-tide（a.k.a algal bloom） model. The performance of the model is highly dependent on the accuracy of parameters, which are the coefficients of functions approximating the biological growth and loss patterns of the C. polykrikoides. These parameters have been estimated using the bioassay data composed of growth-limiting factor and net growth rate value pairs. In the case of the C. polykrikoides, the parameters are different from each other in accordance with the used data because the bioassay data are sufficient compared to the other algal species. The parameters estimated by one specific dataset can be viewed as locally-optimized because they are adjusted only by that dataset. In cases where the other one data set is used, the estimation error might be considerable. In this study, the parameters are estimated by all available data sets without the use of only one specific data set and thus can be considered globally optimized. The cost function for the optimization is defined as the integrated mean squared estimation error, i.e., the difference between the values of the experimental and estimated rates. Based on quantitative error analysis, the root-mean squared errors of the global parameters show smaller values, approximately 25%–50%, than the values of the local parameters. In addition, bias is removed completely in the case of the globally estimated parameters. The parameter sets can be used as the reference default values of a red-tide model because they are optimal and representative. However, additional tuning of the parameters using the in-situ monitoring data is highly required.As opposed to the bioassay data, it is necessary because the bioassay data have limitations in terms of the in-situ coastal conditions.

Closed-Form Models of Accuracy Loss due to Subsampling in SVD Collaborative Filtering

We postulate and analyze a nonlinear subsampling accuracy loss(SSAL)model based on the root mean square error(RMSE)and two SSAL models based on the mean square error(MSE),suggested by extensive preliminary simulations.The SSAL models predict accuracy loss in terms of subsampling parameters like the fraction of users dropped(FUD)and the fraction of items dropped(FID).We seek to investigate whether the models depend on the characteristics of the dataset in a constant way across datasets when using the SVD collaborative filtering(CF)algorithm.The dataset characteristics considered include various densities of the rating matrix and the numbers of users and items.Extensive simulations and rigorous regression analysis led to empirical symmetrical SSAL models in terms of FID and FUD whose coefficients depend only on the data characteristics.The SSAL models came out to be multi-linear in terms of odds ratios of dropping a user(or an item)vs.not dropping it.Moreover,one MSE deterioration model turned out to be linear in the FID and FUD odds where their interaction term has a zero coefficient.Most importantly,the models are constant in the sense that they are written in closed-form using the considered data characteristics(densities and numbers of users and items).The models are validated through extensive simulations based on 850 synthetically generated primary(pre-subsampling)matrices derived from the 25M MovieLens dataset.Nearly 460000 subsampled rating matrices were then simulated and subjected to the singular value decomposition(SVD)CF algorithm.Further validation was conducted using the 1M MovieLens and the Yahoo!Music Rating datasets.The models were constant and significant across all 3 datasets.

Optimal Dependence of Performance and Efficiency of Collaborative Filtering on Random Stratified Subsampling

Dropping fractions of users or items judiciously can reduce the computational cost of Collaborative Filtering(CF)algorithms.The effect of this subsampling on the computing time and accuracy of CF is not fully understood,and clear guidelines for selecting optimal or even appropriate subsampling levels are not available.In this paper,we present a Density-based Random Stratified Subsampling using Clustering(DRSC)algorithm in which the desired Fraction of Users Dropped(FUD)and Fraction of Items Dropped(FID)are specified,and the overall density during subsampling is maintained.Subsequently,we develop simple models of the Training Time Improvement(TTI)and the Accuracy Loss(AL)as functions of FUD and FID,based on extensive simulations of seven standard CF algorithms as applied to various primary matrices from MovieLens,Yahoo Music Rating,and Amazon Automotive data.Simulations show that both TTI and a scaled AL are bi-linear in FID and FUD for all seven methods.The TTI linear regression of a CF method appears to be same for all datasets.Extensive simulations illustrate that TTI can be estimated reliably with FUD and FID only,but AL requires considering additional dataset characteristics.The derived models are then used to optimize the levels of subsampling addressing the tradeoff between TTI and AL.A simple sub-optimal approximation was found,in which the optimal AL is proportional to the optimal Training Time Reduction Factor(TTRF)for higher values of TTRF,and the optimal subsampling levels,like optimal FID/(1-FID),are proportional to the square root of TTRF.

Development and application of a throughflow method for high-loaded axial flow compressors

In this paper, a novel engineering platform for throughflow analysis based on streamline curvature approach is developed for the research of a 5-stage compressor. The method includes several types of improved loss and deviation angle models, which are combined with the authors' adjustments for the purpose of reflecting the influences of three-dimensional internal flow in high-loaded multistage compressors with higher accuracy. In order to validate the reliability and robustness of the method, a series of test cases, including a subsonic compressor P&W 3S1, a transonic rotor NASA Rotor 1B and especially an advanced high pressure core compressor GE E^3 HPC, are conducted. Then the computation procedure is applied to the research of a 5-stage compressor which is designed for developing an industrial gas turbine. The overall performance and aerodynamic configuration predicted by the procedure, both at design- and part-speed conditions, are analyzed and compared with experimental results, which show a good agreement. Further discussion regarding the universality of the method compared with CFD is made afterwards. The throughflow method is verified as a reliable and convenient tool for aerodynamic design and performance prediction of modern high-loaded compressors. This method is also qualified for use in the further optimization of the 5-stage compressor.