The recovery of heavy oil by water flooding is 10% lower than that of conventional crude oil, so enhanced oil recovery （EOR） is of great significance for heavy oil. In this paper, foam flooding with a gas-liquid rat...The recovery of heavy oil by water flooding is 10% lower than that of conventional crude oil, so enhanced oil recovery （EOR） is of great significance for heavy oil. In this paper, foam flooding with a gas-liquid ratio （GLR） of 0.2：1 for the Zhuangxi heavy oil （325 mPa.s at 55 ℃） was performed on cores, sand packs and plate model. In sand pack tests, polymer enhanced foam flooding increased oil recovery by 39.8%, which was 11.4% higher than that for alkali/surfactant/polymer （ASP） flooding under the same conditions. Polymer enhanced foam flooding in plate models shows that the low GLR foam flooding increased oil recovery by about 30%, even when the extended water flooding was finished at 90% water cut. Moreover, it was discovered by microscopy that foam was more stable in heavy oil than in light oil. These results confirm that low GLR foam flooding is a promising technology for displacing conventional heavy oil.展开更多
The influence of technical parameters on the infiltrating height of the moltenmetal in the process of Producing aluminium alloy foam by low-pressure infiltration method were investigated.Experiments indicated that the...The influence of technical parameters on the infiltrating height of the moltenmetal in the process of Producing aluminium alloy foam by low-pressure infiltration method were investigated.Experiments indicated that the height increases with the preheating temperature of granules,theexternal pressureand the pouring temperature of molten alloy,among which the action of pre heating temperature of granules is more effective.There exists a critical pre heating temperature for different size of granules.展开更多
Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average por...Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average pore-diameter:0.57mm)was found to be poor,and could be improved by adding backed cavum or front perforated thin sheet.The absorption coefficient could reach about0.4at1000-1600Hz for the composite structure of5-layer foam with a backed5mm-thick cavum,and even0.68at about1000Hz for that of2-layer foam with the same cavum and a perforated plate closely in front of the foam.展开更多
Electrochemical water splitting into hydrogen and oxygen is a promising strategy for future renewable energy conversion devices.The oxygen evolution reaction(OER)is considered as the bottleneck reaction in an overall ...Electrochemical water splitting into hydrogen and oxygen is a promising strategy for future renewable energy conversion devices.The oxygen evolution reaction(OER)is considered as the bottleneck reaction in an overall water splitting system because it involves 4e- and 4H+ transfer processes.Currently,it is highly desirable to explore low-cost alternative catalysts for OER at ambient conditions.Herein,we report for the first time that nickel phosphide(Ni2P)nanosheets can be facilely grown on Fe foam(FF)as an efficient electrocatalyst for OER with excellent durability and catalytic activity under alkaline conditions.To reach a current density of 10 m A/cm2,the Ni2P-FF catalyst required a low overpotential of only 198 mV for OER.The catalyst’s high OER activity and durability were well maintained at a high current density.The required overpotentials were only 267 and 313 mV to achieve the current densities of 100 and 300 m A/cm2,respectively.The combination of low-cost Fe foam with Ni2P provides a promising low-cost catalyst for large-scale application of electrocatalytic water splitting.展开更多
Oxidatively modified low density lipoprtein (LDL) plays an important role in atheroslerosis (AS) development. To investigate the role of neferine (Nef) in anti-LDL oxidation and foam cell formation, the lipoprotein wa...Oxidatively modified low density lipoprtein (LDL) plays an important role in atheroslerosis (AS) development. To investigate the role of neferine (Nef) in anti-LDL oxidation and foam cell formation, the lipoprotein was derived and subjected to three different treatments: N-LDL (normal LDL), Cu(2+) +LDL and Cu(2+)+Nef+LDL. The LDLs were put at 25℃ for 24 h and the thiobarbituric acid reactive substance (TBARS) values were determined. They were 0. 57 ±0. 02, 6.01±0. 22 and 2. 26±0. 13 nmol/mg protein, respectively. The difference was very significant (P<0.01) for each two groups by t test. Mouse peritoneal macrophage (MΦ) were exposed to 50 μg protein/ml of Cu(2+) + LDL and Cu(2+)+Nef+LDL at 37℃ for 60 h. The tryglyceride (TG) and total cholesterol (TC) content in Mad were assayed. The results showed that Cu(2+) + LDL was more efficient than Cu(2+)+Nef+LDL in stimulating lipid accumulation in MΦ(P <0. 001). The study demonstrated that Nef could inhibit Cu(2+)-mediated LDL oxidation and thereby inhibiting macrophage-derived foam cell formation.展开更多
基金support from the Innovation Team Program and New Century Excellent Talents Awards Program,the Ministry of Education of ChinaFok Ying Tung Education Foundation
文摘The recovery of heavy oil by water flooding is 10% lower than that of conventional crude oil, so enhanced oil recovery （EOR） is of great significance for heavy oil. In this paper, foam flooding with a gas-liquid ratio （GLR） of 0.2：1 for the Zhuangxi heavy oil （325 mPa.s at 55 ℃） was performed on cores, sand packs and plate model. In sand pack tests, polymer enhanced foam flooding increased oil recovery by 39.8%, which was 11.4% higher than that for alkali/surfactant/polymer （ASP） flooding under the same conditions. Polymer enhanced foam flooding in plate models shows that the low GLR foam flooding increased oil recovery by about 30%, even when the extended water flooding was finished at 90% water cut. Moreover, it was discovered by microscopy that foam was more stable in heavy oil than in light oil. These results confirm that low GLR foam flooding is a promising technology for displacing conventional heavy oil.
文摘The influence of technical parameters on the infiltrating height of the moltenmetal in the process of Producing aluminium alloy foam by low-pressure infiltration method were investigated.Experiments indicated that the height increases with the preheating temperature of granules,theexternal pressureand the pouring temperature of molten alloy,among which the action of pre heating temperature of granules is more effective.There exists a critical pre heating temperature for different size of granules.
基金Project (C16) supported by the Testing Foundation of Beijing Normal University,China
文摘Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average pore-diameter:0.57mm)was found to be poor,and could be improved by adding backed cavum or front perforated thin sheet.The absorption coefficient could reach about0.4at1000-1600Hz for the composite structure of5-layer foam with a backed5mm-thick cavum,and even0.68at about1000Hz for that of2-layer foam with the same cavum and a perforated plate closely in front of the foam.
基金financially supported by the National Key Research and Development Program of China (2017YFA0402800)the National Natural Science Foundation of China (51772285)the National Synchrotron Radiation Laboratory at USTC.
文摘Electrochemical water splitting into hydrogen and oxygen is a promising strategy for future renewable energy conversion devices.The oxygen evolution reaction(OER)is considered as the bottleneck reaction in an overall water splitting system because it involves 4e- and 4H+ transfer processes.Currently,it is highly desirable to explore low-cost alternative catalysts for OER at ambient conditions.Herein,we report for the first time that nickel phosphide(Ni2P)nanosheets can be facilely grown on Fe foam(FF)as an efficient electrocatalyst for OER with excellent durability and catalytic activity under alkaline conditions.To reach a current density of 10 m A/cm2,the Ni2P-FF catalyst required a low overpotential of only 198 mV for OER.The catalyst’s high OER activity and durability were well maintained at a high current density.The required overpotentials were only 267 and 313 mV to achieve the current densities of 100 and 300 m A/cm2,respectively.The combination of low-cost Fe foam with Ni2P provides a promising low-cost catalyst for large-scale application of electrocatalytic water splitting.
文摘Oxidatively modified low density lipoprtein (LDL) plays an important role in atheroslerosis (AS) development. To investigate the role of neferine (Nef) in anti-LDL oxidation and foam cell formation, the lipoprotein was derived and subjected to three different treatments: N-LDL (normal LDL), Cu(2+) +LDL and Cu(2+)+Nef+LDL. The LDLs were put at 25℃ for 24 h and the thiobarbituric acid reactive substance (TBARS) values were determined. They were 0. 57 ±0. 02, 6.01±0. 22 and 2. 26±0. 13 nmol/mg protein, respectively. The difference was very significant (P<0.01) for each two groups by t test. Mouse peritoneal macrophage (MΦ) were exposed to 50 μg protein/ml of Cu(2+) + LDL and Cu(2+)+Nef+LDL at 37℃ for 60 h. The tryglyceride (TG) and total cholesterol (TC) content in Mad were assayed. The results showed that Cu(2+) + LDL was more efficient than Cu(2+)+Nef+LDL in stimulating lipid accumulation in MΦ(P <0. 001). The study demonstrated that Nef could inhibit Cu(2+)-mediated LDL oxidation and thereby inhibiting macrophage-derived foam cell formation.
