Isothermal transformation （TTT） behavior of the low carbon steels with two Si contents （0.50 wt pct and 1.35 wt pct） was investigated with and without the prior deformation. The results show that Si and the prior ...Isothermal transformation （TTT） behavior of the low carbon steels with two Si contents （0.50 wt pct and 1.35 wt pct） was investigated with and without the prior deformation. The results show that Si and the prior deformation of the austenite have significant effects on the transformation of the ferrite and bainite. The addition of Si refines the ferrite grains, accelerates the polygonal ferrite transformation and the formation of M/A constituents, leading to the improvement of the strength. The ferrite grains formed under the prior deformation of the austenite become more homogeneous and refined. However, the influence of deformation on the tensile strength of both steels is dependent on the isothermal temperatures. Thermodynamic calculation indicates that Si and prior deformation reduce the incubation time of both ferrite and bainite transformation, but the effect is weakened by the decrease of the isothermal temperatures.展开更多
Many researchers have explored the inclusion modification mechanism to improve non-metallic inclusion modifications in steelmaking. In this study, two types of industrial trials on inclusion modifications in liquid st...Many researchers have explored the inclusion modification mechanism to improve non-metallic inclusion modifications in steelmaking. In this study, two types of industrial trials on inclusion modifications in liquid steel were conducted using ultra-low-carbon Al-killed steel with different Mg and Ca contents to verify the effects of Ca and Mg contents on the modification mechanism of Al_2O_3-based inclusions during secondary refining. The results showed that Al_2O_3-based inclusions can be modified into liquid calcium aluminate or a multi-component inclusion with the addition of a suitable amount of Ca. In addition, [Mg] in liquid steel can further reduce CaO in liquid calcium aluminate to drive its evolution into CaO–MgO–Al_2O_3 multi-component inclusions. Thermodynamic analysis confirmed that the reaction between [Mg] and CaO in liquid calcium aluminate occurs when the MgO content of liquid calcium aluminate is less than 3 wt% and the temperature is higher than 1843 K.展开更多
As the persistent concerns regarding sluggish reaction kinetics and insufficient conductivities of sulfur cathodes in all-solid-state Li-S batteries(ASSLSBs),numerous carbon additives and solid-state electrolytes(SSEs...As the persistent concerns regarding sluggish reaction kinetics and insufficient conductivities of sulfur cathodes in all-solid-state Li-S batteries(ASSLSBs),numerous carbon additives and solid-state electrolytes(SSEs)have been incorporated into the cathode to facilitate ion/electron pathways around sulfur.However,this has resulted in a reduced capacity and decomposition of SSEs.Therefore,it is worth exploring neotype sulfur hosts with electronic/ionic conductivity in the cathode.Herein,we present a hybrid cathode composed of few-layered S/MoS_(2)/C nanosheets(<5 layers)that exhibits high-loading and long-life performance without the need of additional carbon additives in advanced ASSLSBs.The multifunctional MoS_(2)/C host exposes the abundant surface for intimate contacting sites,in situ-formed LixMoS_(2)during discharging as mixed ion/electron conductive network improves the S/Li2S conversion,and contributes extra capacity for the part of active materials.With a high active material content(S+MoS_(2)/C)of 60 wt%in the S/MoS_(2)/C/Li_(6)PS_(5)Cl cathode composite(the carbon content is only~3.97 wt%),the S/MoS_(2)/C electrode delivers excellent electrochemical performance,with a high reversible discharge capacity of 980.3 mAh g^(-1)(588.2 mAh g^(-1)based on the whole cathode weight)after 100 cycles at 100 mA g^(-1).The stable cycling performance is observed over 3500 cycles with a Coulombic efficiency of 98.5%at 600 mA g^(-1),while a high areal capacity of 10.4 mAh cm^(-2)is achieved with active material loading of 12.8 mg cm^(-2).展开更多
Continuous cooling transformation behaviors of low carbon steels with two Si contents （0. 50% and 1. 35%） were investigated under undeformed and deformed conditions. Effects of Si contents, deformation, and cooling ...Continuous cooling transformation behaviors of low carbon steels with two Si contents （0. 50% and 1. 35%） were investigated under undeformed and deformed conditions. Effects of Si contents, deformation, and cooling rates on γ transformation start temperature （Ar3）, phase microstructures, and hardness were studied. The results show that, in the ease of the deformation with the true strain of 0. 4, the length of bainitic ferrite laths is significantly decreased in low Si steel, whereas, the M/A constituent becomes more uniform in high Si steel. An increase in cooling rates lowers the Ar3 greatly. The steel with higher level of Si exhibits higher Ar3, and higher hardness both under undeformed and deformed conditions compared with the steel with a lower Si content. Especially, the influence of Si on At3 is dependent on deformation. Such effects are more significant under the undeformed condition. The hardness of both steels increases with the increase of cooling rates, whereas, the deformation involved in both steels reduces the hardness.展开更多
基金the Baoshan Iron and Steel Group for the financial support
文摘Isothermal transformation （TTT） behavior of the low carbon steels with two Si contents （0.50 wt pct and 1.35 wt pct） was investigated with and without the prior deformation. The results show that Si and the prior deformation of the austenite have significant effects on the transformation of the ferrite and bainite. The addition of Si refines the ferrite grains, accelerates the polygonal ferrite transformation and the formation of M/A constituents, leading to the improvement of the strength. The ferrite grains formed under the prior deformation of the austenite become more homogeneous and refined. However, the influence of deformation on the tensile strength of both steels is dependent on the isothermal temperatures. Thermodynamic calculation indicates that Si and prior deformation reduce the incubation time of both ferrite and bainite transformation, but the effect is weakened by the decrease of the isothermal temperatures.
基金financially supported by the Fundamental Research Funds for the Central Universities (No. FRF-TP-16-079A1)the National Science Foundation for Young Scientists of China (No. 51704021)+1 种基金the Joint Funds of National Natural Science Foundation of China (No. U1560203)supported by Beijing Key Laboratory of Special Melting and Preparation of High-end Metal Materials
文摘Many researchers have explored the inclusion modification mechanism to improve non-metallic inclusion modifications in steelmaking. In this study, two types of industrial trials on inclusion modifications in liquid steel were conducted using ultra-low-carbon Al-killed steel with different Mg and Ca contents to verify the effects of Ca and Mg contents on the modification mechanism of Al_2O_3-based inclusions during secondary refining. The results showed that Al_2O_3-based inclusions can be modified into liquid calcium aluminate or a multi-component inclusion with the addition of a suitable amount of Ca. In addition, [Mg] in liquid steel can further reduce CaO in liquid calcium aluminate to drive its evolution into CaO–MgO–Al_2O_3 multi-component inclusions. Thermodynamic analysis confirmed that the reaction between [Mg] and CaO in liquid calcium aluminate occurs when the MgO content of liquid calcium aluminate is less than 3 wt% and the temperature is higher than 1843 K.
基金the financial support from the National Natural Science Foundation of China(T2241003)the National Key Research and Development Program of China(2022YFB4003500)the Key R&D project of Hubei Province,China(2021AAA006)
文摘As the persistent concerns regarding sluggish reaction kinetics and insufficient conductivities of sulfur cathodes in all-solid-state Li-S batteries(ASSLSBs),numerous carbon additives and solid-state electrolytes(SSEs)have been incorporated into the cathode to facilitate ion/electron pathways around sulfur.However,this has resulted in a reduced capacity and decomposition of SSEs.Therefore,it is worth exploring neotype sulfur hosts with electronic/ionic conductivity in the cathode.Herein,we present a hybrid cathode composed of few-layered S/MoS_(2)/C nanosheets(<5 layers)that exhibits high-loading and long-life performance without the need of additional carbon additives in advanced ASSLSBs.The multifunctional MoS_(2)/C host exposes the abundant surface for intimate contacting sites,in situ-formed LixMoS_(2)during discharging as mixed ion/electron conductive network improves the S/Li2S conversion,and contributes extra capacity for the part of active materials.With a high active material content(S+MoS_(2)/C)of 60 wt%in the S/MoS_(2)/C/Li_(6)PS_(5)Cl cathode composite(the carbon content is only~3.97 wt%),the S/MoS_(2)/C electrode delivers excellent electrochemical performance,with a high reversible discharge capacity of 980.3 mAh g^(-1)(588.2 mAh g^(-1)based on the whole cathode weight)after 100 cycles at 100 mA g^(-1).The stable cycling performance is observed over 3500 cycles with a Coulombic efficiency of 98.5%at 600 mA g^(-1),while a high areal capacity of 10.4 mAh cm^(-2)is achieved with active material loading of 12.8 mg cm^(-2).
基金Item Sponsored by National Natural Science Foundation of China (50527402)
文摘Continuous cooling transformation behaviors of low carbon steels with two Si contents （0. 50% and 1. 35%） were investigated under undeformed and deformed conditions. Effects of Si contents, deformation, and cooling rates on γ transformation start temperature （Ar3）, phase microstructures, and hardness were studied. The results show that, in the ease of the deformation with the true strain of 0. 4, the length of bainitic ferrite laths is significantly decreased in low Si steel, whereas, the M/A constituent becomes more uniform in high Si steel. An increase in cooling rates lowers the Ar3 greatly. The steel with higher level of Si exhibits higher Ar3, and higher hardness both under undeformed and deformed conditions compared with the steel with a lower Si content. Especially, the influence of Si on At3 is dependent on deformation. Such effects are more significant under the undeformed condition. The hardness of both steels increases with the increase of cooling rates, whereas, the deformation involved in both steels reduces the hardness.
