The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown th...The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown that the interstitial elements, such as C and N, may be completely stabilized by the addition of Nb and Ti. With the increase of Nb and Ti contents ,the α ＋ γ two phases gradually transfer to a single α-phase under a high temperature condition ,and the content of the carbide M23 C6 gradually decreases. The microstructure has indicated that the combined addition of Nb and Ti can promote the recrystallization of the band structure and form more uniform equiaxed grains. Also, with the increase of Nb and Ti contents,the elongation, the r-value and the corrosion resistance of cold-rolled and annealed sheets are improved prominently. In comparison with the effect of Ti ,the addition of Nb is more beneficial to the increase of r-value and the corrosion resistance.展开更多
Mn is a weak element for austenite formation and its effect on martensitic stainless steel is seldom researched. The microstructure and property of 13Cr martensitic stainless steel with varied Mn content and low carbo...Mn is a weak element for austenite formation and its effect on martensitic stainless steel is seldom researched. The microstructure and property of 13Cr martensitic stainless steel with varied Mn content and low carbon content were studied. The research demonstrates that Mn enlarges the austenitic zone at a high temperature and increases the strength and hardness of martensitic stainless steel. Following the addition of Mn,the corrosion resistance property of low carbon 13Cr stainless steel only decreases slightly. The strength and hardness of low carbon 13Cr stainless steel containing Mn is similar to that of high carbon 13Cr stainless steel.展开更多
Dissimilar fusion welding of austenitic stainless steels to carbon steels has some metallurgical and technical problems. It was suggested that the solid-state nature of friction stir welding （FSW） can overcome these...Dissimilar fusion welding of austenitic stainless steels to carbon steels has some metallurgical and technical problems. It was suggested that the solid-state nature of friction stir welding （FSW） can overcome these problems and produce a sound weld with reliable mechanical properties. In this study, plates of 304 stainless steel and st37 steel were welded together by FSW at tool rotational speed of 600 r/rain and welding speed of 50 ram/rain. In the stir zone （SZ） of 304 stainless steel, the results showed a refined grain structure with some features of metadynamic recrystallization. In the SZ of st37 steel, the hot deformation of material in the austenite region produced small austenite grains. These grains transformed to fine ferrite and pearlite by cooling the material after FSW. The production of fine grains increased the hardness and tensile strength in the SZ of both sides with respect to their base metals （BMs）.展开更多
基金funded by the CITIC-CBMM R & D Subject Foundation(2010-D046).
文摘The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown that the interstitial elements, such as C and N, may be completely stabilized by the addition of Nb and Ti. With the increase of Nb and Ti contents ,the α ＋ γ two phases gradually transfer to a single α-phase under a high temperature condition ,and the content of the carbide M23 C6 gradually decreases. The microstructure has indicated that the combined addition of Nb and Ti can promote the recrystallization of the band structure and form more uniform equiaxed grains. Also, with the increase of Nb and Ti contents,the elongation, the r-value and the corrosion resistance of cold-rolled and annealed sheets are improved prominently. In comparison with the effect of Ti ,the addition of Nb is more beneficial to the increase of r-value and the corrosion resistance.
文摘Mn is a weak element for austenite formation and its effect on martensitic stainless steel is seldom researched. The microstructure and property of 13Cr martensitic stainless steel with varied Mn content and low carbon content were studied. The research demonstrates that Mn enlarges the austenitic zone at a high temperature and increases the strength and hardness of martensitic stainless steel. Following the addition of Mn,the corrosion resistance property of low carbon 13Cr stainless steel only decreases slightly. The strength and hardness of low carbon 13Cr stainless steel containing Mn is similar to that of high carbon 13Cr stainless steel.
基金the support from Harbin Institute of Technology(HIT) for the experimental assistance
文摘Dissimilar fusion welding of austenitic stainless steels to carbon steels has some metallurgical and technical problems. It was suggested that the solid-state nature of friction stir welding （FSW） can overcome these problems and produce a sound weld with reliable mechanical properties. In this study, plates of 304 stainless steel and st37 steel were welded together by FSW at tool rotational speed of 600 r/rain and welding speed of 50 ram/rain. In the stir zone （SZ） of 304 stainless steel, the results showed a refined grain structure with some features of metadynamic recrystallization. In the SZ of st37 steel, the hot deformation of material in the austenite region produced small austenite grains. These grains transformed to fine ferrite and pearlite by cooling the material after FSW. The production of fine grains increased the hardness and tensile strength in the SZ of both sides with respect to their base metals （BMs）.
