DESIGN AND ANALYSIS OF NOVEL ACTIVE ACTUATOR TO CONTROL LOW FREQUENCY VIBRATIONS OF SHAFT SYSTEM

Aiming at providing with high-load capability in active vibration control of large-scale rotor system, a new type of active actuator to simultaneously reduce the dangers of low frequency flexural and torsional vibrations is designed. The actuator employs electro-hydraulic system and can provide a high and circumferential load. To initialize new research, the characteristics of various kinds of active actuators to control rotor shaft vibration are briefly introduced. The purpose of this paper is to introduce the preliminary results via presenting the structure, functions and operating principles, in particular, the working process of the electro-hydraulic system of the new actuator which includes a set of high speed electromagnetic valves and a series of sloping cone-shaped openings, and presenting the transmission relationships among the control parameters from control signals into the valves to active load onto shaft. The course of the work is dynamic, and a series of spatial forces and moments are put on the shaft to get an external resultant force to reduce excitations that induce vibration of shafts. By checking states of vibration, the actuator can control the impulse width and the interval of injection time for applying different control force to a vibration shaft in two circumference directions through the regulating action of a set of combination directional control valves. The results from simulating analysis and experiment show evidence of that this design can satisfy the case of active process of decreasing of flexural and torsional vibrations.

Analysis and compensation of low frequency characteristics of sensors for vibration testing

In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal pressure is proposed.This method uses a sinusoidal pressure dynamic system with two-way dual channel import and export synchronization technology to study the low frequency characteristics of a piezoelectric sensor of PCB company,and its lower cut-off frequency is 0.26 Hz.It is also studied that when the frequency of the measured vibration or shock signal is 1-200 kHz,the error range of signal positive pressure action time is 4.87%-0.03%.The dynamic compensation for the low frequency of the vibration sensor is carried out,and the compensation effect is good.

LFEC and LFEVC of AZ80 magnesium alloy

The effects of a low frequency electromagnetic field and a low frequency electromagnetic vibration field applied during DC casting of AZ80 Mg on microstructures and alloying element distribution in ingots were investigated.The experiments were performed both in absence and in the presence of the magnetic fields.In DC casting,the ingot exhibited coarse microstructure and severe segregation of Al.In the presence of solo low frequency alternating magnetic field,namely LFEC,the grains of the ingot was effectively refined and the segregation of Al was significantly decreased.In LFEVC,namely low frequency electromagnetic vibration casting,the ingot were significantly refined and the segregation was suppressed.With increasing the vibration intensities,the grain refinement and segregation suppression were increased.

Simulation and experimental study of fluid induced excitation mechanism for liquid rocket engine immerged rotor

Low frequency vibration has occurred in the turbine pump of one type of liquid-propellant rocket engine,which threatens the safety and reliability of the rockets and their engines seriously.To figure out the mechanism of the low frequency vibration faults,in this paper,a dynamical model of a immersion turbine pump rotor system was established for the consideration of the vibration caused by small gap annual flow excitation which properly happened in immersion turbine pump rotor.The Newmark directly integral method was used to simulate the vibration characteristics of turbine pump,and an experiment was also carried out to investigated this problem.Results showed that,the small gap annual flow excitation could induce large amplitude low frequency vibration on the turbine pump rotor bearing system.The amplitude and frequency of low frequency vibration had relation with the parameters of the turbine pump clearance structure,such as the clearance ratio,length-diameter ratio and the viscosity of the fluid medium.In order to avoid the vibration induced by the small gap annual flow excitation,sealing effect should be improved and length-diameter ratio should be decreased.

Low frequency vibration tests on a floating slab track in an underground laboratory

Low frequency vibrations induced by underground railways have attracted increasing attention in recent years. To obtain the characteristics of low frequency vibrations and the low frequency performance of a floating slab track (FST), low frequency vibration tests on an FST in an underground laboratory at Beijing Jiaotong University were carried out. The FST and an unbalanced shaker SBZ30 for dynamic simulation were designed for use in low frequency vibration experiments. Vibration measurements were performed on the bogie of the unbalanced shaker, the rail, the slab, the tunnel invert, the tunnel wall, the tunnel apex, and on the ground surface at distances varying from 0 to 80 m from the track. Measurements were also made on several floors of an adjacent building. Detailed results of low frequency vibration tests were reported. The attenuation of low frequency vibrations with the distance from the track was presented, as well as the responses of different floors of the building. The experimental results could be regarded as a reference for developing methods to control low frequency vibrations and for adopting countermeasures.

Effects of installations on the low frequency vibration response of specimens in acoustic fatigue tests

The low frequency vibration response of a specimen in acoustic fatigue tests depends not only on the dynamic characteristics and the boundary conditions of the specimen itself, but also on the test unit which couples the specimen to a given sound field. Further, the latter can even be dominant instead the former in some circumstances. This fact is shown in the paper by using the experimental results and the theoretical analysis of the acoustic-induced vibration of a boundary clamped rectangular thin plate. In analysing the systems of acoustic fatigue test, an approach of electro-mechano-acoustical analogous circuit is used. The application of the approach can give an estimation of the effects on the low frequency vibration modes of various parameters in a system quantitatively. This supplies a theoretical basis and a means for the rational layout of acoustic fatigue tests.