Numerical study on gas production via a horizontal well from hydrate reservoirs with different slope angles in the South China Sea

It is important to study the effect of hydrate production on the physical and mechanical properties of low-permeability clayey–silty reservoirs for the largescale exploitation of hydrate reservoirs in the South China Sea.In this study,a multiphysical-field coupling model,combined with actual exploration drilling data and the mechanical experimental data of hydrate cores in the laboratory,was established to investigate the physical and mechanical properties of low-permeability reservoirs with different slope angles during 5-year hydrate production by the depressurization method via a horizontal well.The result shows that the permeability of reservoirs severely affects gas production rate,and the maximum gas production amount of a 20-m-long horizontal well can reach186.8 m3/day during the 5-year hydrate production.Reservoirs with smaller slope angles show higher gas production rates.The depressurization propagation and hydrate dissociation mainly develop along the direction parallel to the slope.Besides,the mean effective stress of reservoirs is concentrated in the near-wellbore area with the on-going hydrate production,and gradually decreases with the increase of the slope angle.Different from the effective stress distribution law,the total reservoir settlement amount first decreases and then increases with the increase of the slope angle.The maximum settlement of reservoirs with a 0°slope angle is up to 3.4 m,and the displacement in the near-wellbore area is as high as2.2 m after 5 years of hydrate production.It is concluded that the pore pressure drop region of low-permeability reservoirs in the South China Sea is limited,and various slope angles further lead to differences in effective stress and strain of reservoirs during hydrate production,resulting in severe uneven settlement of reservoirs.

Extensive application of rate transient method in performance analysis for low permeability gas reservoirs

Rate transient method is a recently-developed performance analysis tool specially designed for low-permeability or tight gas reservoirs. This method, theoretically based on pressure transient analysis, integrates material balance principle and the concept of material balance pseudo-time proposed by Blansingame. With daily production data of gas well, it could be used to calculate OGIP, current formation pressure, permeability, skin factor, to identify complex geologic boundaries, to determine whether drainage boundary has been reached, to calculate drainage area and drainage radius for single well and to predict performance. It has been extensively employed in more than ten low-permeability gas fields. It proves that most problems in performance analysis for low permeability gas reservoirs could be solved by this method. Field practices show great economical benefits could be achieved by employing this method in gas field development.

Advances in enhanced oil recovery technologies for low permeability reservoirs

Low permeability oil and gas resources are rich and have great potential all over the world, which has gradually become the main goal of oil and gas development. However, after traditional primary and secondary exploitation, there is still a large amount of remaining oil that has not been recovered.Therefore, in recent years, enhanced oil recovery(EOR) technologies for low permeability reservoirs have been greatly developed to further improve crude oil production. This study presents a comprehensive review of EOR technologies in low permeability reservoirs with an emphasis on gas flooding, surfactant flooding, nanofluid flooding and imbibition EOR technologies. In addition, two kinds of gel systems are introduced for conformance control in low permeability reservoirs with channeling problems. Finally,the technical challenges, directions and outlooks of EOR in low permeability reservoirs are addressed.

Development of the theory and technology for low permeability reservoirs in China

The development theories of low-permeability oil and gas reservoirs are refined, the key development technologies are summarized, and the prospect and technical direction of sustainable development are discussed based on the understanding and research on developed low-permeability oil and gas resources in China. The main achievements include:(1) the theories of low-permeability reservoir seepage, dual-medium seepage, relative homogeneity, etc.(2) the well location optimization technology combining favorable area of reservoir with gas-bearing prediction and combining pre-stack with post-stack;(3) oriented perforating multi-fracture, multistage sand adding, multistage temporary plugging, vertical well multilayer, horizontal and other fracturing techniques to improve productivity of single well;(4) the technology of increasing injection and keeping pressure, such as overall decreasing pressure, local pressurization, shaped charge stamping and plugging removal, fine separate injection, mild advanced water injection and so on;(5) enhanced recovery technology of optimization of injection-production well network in horizontal wells. To continue to develop low-permeability reserves economically and effectively, there are three aspects of work to be done well:(1) depending on technical improvement, continue to innovate new technologies and methods, establish a new mode of low quality reservoir development economically, determine the main technical boundaries and form replacement technology reserves of advanced development;(2) adhering to the management system of low cost technology & low cost, set up a complete set of low-cost dual integration innovation system through continuous innovation in technology and management;(3) striving for national preferential policies.

Feasibility of Gas Drive in Fang-48 Fault Block Oil Reservoir

The Fang-48 fault block oil reservoir is an extremely low permeability reservoir, and it is difficult to produce such a reservoir by waterflooding. Laboratory analysis of reservoir oil shows that the minimum miscibility pressure for CO2 drive in Fang-48 fault block oil reservoir is 29 MPa, lower than the formation fracture pressure of 34 MPa, so the displacement mechanism is miscible drive. The threshold pressure gradient for gas injection is less than that for waterflooding, and the recovery by gas drive is higher than waterflooding. Furthermore, the threshold pressure gradient for carbon dioxide injection is smaller than that for hydrocarbon gas, and the oil recovery by carbon dioxide drive is higher than that by hydrocarbon gas displacement, so carbon dioxide drive is recommended for the development of the Fang-48 fault block oil reservoir.

Porosity Calculation of Tight Sand Gas Reservoirs with GA-CM Hybrid Optimization Log Interpretation Method

Tight sand gas reservoirs are our country’s fairly rich unconventional natural gas resources, and their exploration and development is of prime importance. Sulige Gas Field which located in the northern Ordos Basin is tight sand gas reservoirs. It is typically featured by low porosity and low permeability, and the error of porosity calculation by traditional methods is larger. Multicomponent explanation model is built by analyzing the thin slice data, and the objective function is got according to the concept of optimization log interpretation method. This paper puts the Genetic Algorithm and the Complex Algorithm together to form the GA-CM Hybrid Algorithm for searching the optimal solution of the objective function, getting the porosity of tight sandstone gas reservoirs. The deviation got by this method is lesser compared with the core porosity, with a high reliability.

Key Problems and Countermeasures in CO_(2)Flooding and Storage

Based on literature research in combination with the practice of CO_(2)flooding and storage in Jilin Oilfield,this study assesses the key problems in CO_(2)flooding and storage,proposing the corresponding countermeasures from five aspects of CO_(2)gas source condition,namely geological condition evaluation,scheme design incoordination with other production methods,economic and effectiveness evaluation,together with dynamic monitoring and safety evaluation.The results show that CO_(2)flooding is the most economic and effective CO_(2)storage method.In eastern China,inorganic origin CO_(2)gas reservoirs are widely developed and are especially the most enriched in the Paleozoic carbonate rock strata and the Cenozoic Paleogene–Neogene system,which provide a rich resource base for CO_(2)flooding and storage.In the future,CO_(2)generated in the industrial field will become the main gas source of CO_(2)flooding and storage.The evaluation of geological conditions of oil and gas reservoirs is the basis for the potential evaluation,planning scheme design and implementation of CO_(2)flooding and storage.CO_(2)storage should be below the depth of 800 m,the CO_(2)flooding and storage effects in lowpermeability oil reservoirs being the best.CO_(2)geological storage mechanisms primarily consist of tectonic geological storage,bound gas storage,dissolution storage,mineralization storage,hydrodynamic storage and coalbed adsorption storage.The practice of CO_(2)flooding and storage in Jilin Oilfield demonstratesthat the oil increment by CO_(2)flooding is at least 24%higher than by conventional water flooding.The most critical factor determining the success or failure of CO_(2)flooding and storage is economic effectiveness,which needs to be explored from two aspects:the method and technology innovation along with the carbon peaking and carbon neutrality policy support.After CO_(2)is injected into the reservoir,it will react with the reservoir and fluid,the problem of CO_(2)recovery or overflow will occur,so the dynamic monitoring and safety evaluation of CO_(2)flooding and storage are very important.This study is of great significance to the expansion of the application scope of CO_(2)flooding and storage and future scientific planning and deployment.

Geologic characteristics, controlling factors and hydrocarbon accumulation mechanisms of China’s Large Gas Provinces of low porosity and permeability

Based on the analysis of the geological characteristics and controlling factors, we analyzed the formation mechanism of different types of gas reservoirs. The main characteristics of gas provinces with low porosity and permeability are mainly as follows: large area, low abundance, small gas pools and large gas provinces; widely distributed excellent hydrocarbon source rocks with closely contacted source-reservoir-cap association; development mainly in large continental depressions or in paralic shallow-river delta systems; many kinds of traps coexisting in large areas, dominantly para-layered lithologic, digenetic and capillary pressure traps; double fluid flow mechanisms of Darcy flow and non-Darcy flow; complicated gas and water relations; and having the resource distribution of highly productive "sweet spots", banding concentration, and macroscopically large areas integrated. The main controlling factors of large sandstone gas provinces with low porosity and permeability are stable dynamic backgrounds and gentle structural frameworks which control the extensive distribution of alternate (interbedded) sandstones and mudstones; weak hydropower of large gentle lake basins controlling the formation of discontinuous, low porosity and permeability reservoirs in shallow-water deltas; regionally differential diagenesis and no homogeneous digenetic facies controlling the development of favorable reservoirs and digenetic traps; and weak and dispersive reservoir-forming dynamic forces leading to the widely distributed small traps with low abundance. Low porosity and permeability gas provinces with different trap types have different formation mechanisms which include fluid diversion pressure difference interactive mechanism of lithologic-trap gas accumulations, separated differential collection mechanism of digenetic-trap gas accumulations, and the Non-Darcy flow mechanism of capillary-pressure gas accumulations.

Productivity model for gas reservoirs with open-hole multi-fracturing horizontal wells and optimization of hydraulic fracture parameters

Multi-fractured horizontal wells are commonly employed to improve the productivity of low and ultra-low permeability gas reservoirs.However,conventional productivity models for open-hole multi-fractured horizontal wells do not consider the interferences between hydraulic fractures and the open-hole segments,resulting in significant errors in calculation results.In this article,a novel productivity prediction model for gas reservoirs with open-hole multi-fractured horizontal wells was proposed based on complex potential theories,potential superimposition,and numerical analysis.Herein,an open-hole segment between two adjacent fractures was regarded as an equivalent fracture,which was discretized as in cases of artificial fractures.The proposed model was then applied to investigate the effects of various parameters,such as the angle between the fracture and horizontal shaft,fracture quantity,fracture length,diversion capacity of fractures,horizontal well length,and inter-fracture distance,on the productivity of low permeability gas reservoirs with multi-fractured horizontal wells.Simulation results revealed that the quantity,length,and distribution of fractures had significant effects on the productivity of low permeability gas reservoirs while the effects of the diversion capacity of fractures and the angle between the fracture and horizontal shaft were negligible.Additionally,a U-shaped distribution of fracture lengths was preferential as the quantity of fractures at shaft ends was twice that in the middle area.

The establishment of a new deliverability equation considering threshold pressure gradient

The flowing mechanism of a low permeability gas reservoir is different from a conventional gas reservoir,especially for that with higher irreducible water saturation the threshold pressure gradient exists. At present,in all the deliverability equation,the additional pressure drop caused by the threshold pressure gradient is viewed as constant,but this method has big error in the practical application. Based on the non-Darcy steady flow equation,the limited integral of the additional pressure drop is solved in this paper and it is realized that the additional pressure drop is not a constant but has something to do with production data,and a new deliverability equation is derived,with the relevant processing method for modified isochronal test data. The new deliverability equation turns out to be practical through onsite application.