In the high speed target environment,there exists serious Doppler effect in the low pulse repetition frequency（LPRF） modulated frequency stepped frequency（MFSF） radar signal.The velocity range of the target is lar...In the high speed target environment,there exists serious Doppler effect in the low pulse repetition frequency（LPRF） modulated frequency stepped frequency（MFSF） radar signal.The velocity range of the target is large and the velocity is high ambiguous,so the single method is difficult to satisfy the velocity measurement requirement.For this problem,a novel method is presented,it is a combination of cross-correlation inner frame velocity measurement and range-Doppler coupling velocity measurement.The cross-correlation inner frame method,overcoming the low Doppler tolerance of the cross-correlation between frames,can obtain the coarse velocity of the high speed target,and then the precision velocity can be obtained with the range-Doppler coupling method.The simulation results confirm the method is effective,and also it is well real-time and easy to the project application.展开更多
A single-resonant low-threshold type-Iβ-Ba_(2)BO_(4)(BBO) optical parametric oscillator (OPO) with tunable output from 410 nm to 630 nm at 5 k Hz repetition rate is reported.By taking the noncollinear phase matching ...A single-resonant low-threshold type-Iβ-Ba_(2)BO_(4)(BBO) optical parametric oscillator (OPO) with tunable output from 410 nm to 630 nm at 5 k Hz repetition rate is reported.By taking the noncollinear phase matching method,low-threshold OPO operation could be obtained compared with the configuration of collinear phase matching,and the maximum optical–optical conversion efficiency of 11.8%was achieved at 500 nm wavelength when 0.4 m J pump pulse energy was applied.When the noncollinearity angle was preset at 1.6°,4.8°,and 6.3°,a continuously tuning output with a total spectral range of 220 nm was successfully obtained by adjusting the phase matching angle of the BBO crystal.展开更多
文摘In the high speed target environment,there exists serious Doppler effect in the low pulse repetition frequency（LPRF） modulated frequency stepped frequency（MFSF） radar signal.The velocity range of the target is large and the velocity is high ambiguous,so the single method is difficult to satisfy the velocity measurement requirement.For this problem,a novel method is presented,it is a combination of cross-correlation inner frame velocity measurement and range-Doppler coupling velocity measurement.The cross-correlation inner frame method,overcoming the low Doppler tolerance of the cross-correlation between frames,can obtain the coarse velocity of the high speed target,and then the precision velocity can be obtained with the range-Doppler coupling method.The simulation results confirm the method is effective,and also it is well real-time and easy to the project application.
基金This work was supported by the Natural Science Foundation of Shanghai(No.19YF1453600)the Key Task Project in Scientific and Technological Research on Social Development of Shanghai(No.20dz1206502)+2 种基金the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(No.2018SDKJ0102)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA22000000)the Major Program of the National Natural Science Foundation of China(No.61991453)。
文摘A single-resonant low-threshold type-Iβ-Ba_(2)BO_(4)(BBO) optical parametric oscillator (OPO) with tunable output from 410 nm to 630 nm at 5 k Hz repetition rate is reported.By taking the noncollinear phase matching method,low-threshold OPO operation could be obtained compared with the configuration of collinear phase matching,and the maximum optical–optical conversion efficiency of 11.8%was achieved at 500 nm wavelength when 0.4 m J pump pulse energy was applied.When the noncollinearity angle was preset at 1.6°,4.8°,and 6.3°,a continuously tuning output with a total spectral range of 220 nm was successfully obtained by adjusting the phase matching angle of the BBO crystal.
