Adaptive Bistable Stochastic Resonance Based Weak Signal Reception in Additive Laplacian Noise

Weak signal reception is a very important and challenging problem for communication systems especially in the presence of non-Gaussian noise,and in which case the performance of optimal linear correlated receiver degrades dramatically.Aiming at this,a novel uncorrelated reception scheme based on adaptive bistable stochastic resonance(ABSR)for a weak signal in additive Laplacian noise is investigated.By analyzing the key issue that the quantitative cooperative resonance matching relationship between the characteristics of the noisy signal and the nonlinear bistable system,an analytical expression of the bistable system parameters is derived.On this basis,by means of bistable system parameters self-adaptive adjustment,the counterintuitive stochastic resonance(SR)phenomenon can be easily generated at which the random noise is changed into a benefit to assist signal transmission.Finally,it is demonstrated that approximately 8dB bit error ratio(BER)performance improvement for the ABSR-based uncorrelated receiver when compared with the traditional uncorrelated receiver at low signal to noise ratio(SNR)conditions varying from-30dB to-5dB.

Signal-to-noise ratio comparison of angular signal radiography and phase stepping method

Grating-based x-ray phase contrast imaging has the potential to be applied in future medical applications as it is compatible with both laboratory and synchrotron source. However, information retrieval methods are important because acquisition speed, scanning mode, image quality, and radiation dose depend on them. Phase-stepping （PS） is a widely used method to retrieve information, while angular signal radiography （ASR） is a newly established method. In this manuscript, signal-to-noise ratios （SNRs） of ASR are compared with that of PS. Numerical experiments are performed to validate theoretical results. SNRs comparison shows that for refraction and scattering images ASR has higher SNR than PS method, while for absorption image both methods have same SNR. Therefore, our conclusions would have guideline in future preclinical and clinical applications.

Combining Radon-ambiguity transform with second-order difference to improve detection probability of LFM signals in low SNR

The Radon-ambiguity transform （RAT）, although efficient for detecting the linear frequency modulated signals （LFMs）, is troubled by the energy accumulation of noise in low signal-to-noise ratio （SNR）. A secondorder difference （SOD） method is proposed to treat with this problem. In the SOD method, the optimal search step and difference step are derived from the LFM rate resolution formula. The sharpness of the peaks of RAT is measured by curvature, and the sharpness, but not the magnitude of the peaks, is used to detect the LFMs. The SOD method removes the noise energy accumulation and reserves the drastically changing components integrally; thus, it improves the detection probability of LFMs in low SNR. The expected performance of the new method is verified by 100 Monte Carlo simulations.

Blind parameter estimation of pseudo-random binary code-linear frequency modulation signal based on Duffing oscillator at low SNR

Conventional parameter estimation methods for pseudo-random binary code-linear frequency modulation(PRBC-LFM)signals require prior knowledge,are computationally complex,and exhibit poor performance at low signal-to-noise ratios(SNRs).To overcome these problems,a blind parameter estimation method based on a Duffing oscillator array is proposed.A new relationship formula among the state of the Duffing oscillator,the pseudo-random sequence of the PRBC-LFM signal,and the frequency difference between the PRBC-LFM signal and the periodic driving force signal of the Duffing oscillator is derived,providing the theoretical basis for blind parameter estimation.Methods based on amplitude method,short-time Fourier transform method,and power spectrum entropy method are used to binarize the output of the Duffing oscillator array,and their performance is compared.The pseudo-random sequence is estimated using Duffing oscillator array synchronization,and the carrier frequency parameters are obtained by the relational expressions and characteristics of the difference frequency.Simulation results show that this blind estimation method overcomes limitations in prior knowledge and maintains good parameter estimation performance up to an SNR of-35 dB.

THE METHOD OF SEPARATING HARMONIC SIGNALS FROM MULTIPLICATIVE AND ADDITIVE NOISES

This paper focuses on the extraction of a harmonic signal from multiplicative and additive noises. A method is proposed in two stages： （1） to square the original discrete time series, which includes both signals and noises, and form a new time series. By this means, the multiplicative noise is converted to additive noise; and （2） to filter out the noise by using existing noise removal schemes. With a large amount of simulation, experimental results demonstrated the efficiency and effectiveness of this newly developed method in terms of Signal-to-Noise Ratio （SNR） and other criteria. Prom the experiment, it is also found that： the two kinds of noises affect the SNR differently. In general, the SNR is not influenced by multiplicative Gaussian noise regardless of its variance. However, if both kinds of noise exist, the SNR decreases with the incensement of the Variance of Additive Noise to Multiplicative Noise Ratio （VAMNR）. This analysis is also supported by simulation work.

New Wavelet Thresholding Algorithm in Dropping Ambient Noise from Underwater Acoustic Signals

Underwater Wireless Communication, largely dependent on the acoustic communication between the machines, is largely affected by various types of noise in the shallow and deep water. However ambient noise which is due to multiple sources (e.g. shipping, wind) and no one source dominates. Ambient noise masks the acoustic signal to a large extent. Hence today it has drawn the attention of the experts to reduce its effect on the received signal. This paper discusses ambient noise problem and devises a new wavelet thresholding method to reduce its effect. Afterwards a comparative study on statistical parameters is shown to prove the efficiency of the devised method.

Tracking algorithm of BPSK signal in low bit SNR and high dynamic scenarios

A new tracking algorithm is proposed aiming at the tracking problem in low bit signal-to- noise ratio （i. e. , Eb/N0 ） scenarios, in which the bit clock regenerated by bit synchronization loop decides loop update moment. The double frequency processing and non-coherent accumulation tech- nologies are applied to eliminate the impact of data polarity inversion, and then long time accumula- tion improves the input signal-to-noise ratio of discriminator. The frequency locked loop and phase locked loop constitute a carrier loop in parallel, which can meet the high dynamic demands. The ef- fectiveness of this algorithm has been corroborated by theoretical analysis, simulation and measure- ments, and the new tracking algorithm has been used in an aerospace engineering project successfully.

A fast decoupled ISAR high-resolution imaging method using structural sparse information under low SNR

Inverse synthetic aperture radar (ISAR) image can be represented and reconstructed by sparse recovery (SR) approaches. However, the existing SR algorithms, which are used for ISAR imaging, have suffered from high computational cost and poor imaging quality under a low signal to noise ratio (SNR) condition. This paper proposes a fast decoupled ISAR imaging method by exploiting the inherent structural sparse information of the targets. Firstly, the ISAR imaging problem is decoupled into two sub-problems. One is range direction imaging and the other is azimuth direction focusing. Secondly, an efficient two-stage SR method is proposed to obtain higher resolution range profiles by using jointly sparse information. Finally, the residual linear Bregman iteration via fast Fourier transforms (RLBI-FFT) is proposed to perform the azimuth focusing on low SNR efficiently. Theoretical analysis and simulation results show that the proposed method has better performence to efficiently implement higher-resolution ISAR imaging under the low SNR condition.

Micro-Doppler feature extraction of micro-rotor UAV under the background of low SNR

Micro-Doppler feature extraction of unmanned aerial vehicles(UAVs)is important for their identification and classification.Noise and the motion state of the UAV are the main factors that may affect feature extraction and estimation precision of the micro-motion parameters.The spectrum of UAV echoes is reconstructed to strengthen the micro-motion feature and reduce the influence of the noise on the condition of low signal to noise ratio(SNR).Then considering the rotor rate variance of UAV in the complex motion state,the cepstrum method is improved to extract the rotation rate of the UAV,and the blade length can be intensively estimated.The experiment results for the simulation data and measured data show that the reconstruction of the spectrum for the UAV echoes is helpful and the relative mean square root error of the rotating speed and blade length estimated by the proposed method can be improved.However,the computation complexity is higher and the heavier computation burden is required.

Long term integration of radar signals with unknown Doppler shift for ubiquitous radar

Ubiquitous radar is a new radar system that provides continuous and uninterrupted multifunction capability within a coverage volume. Continuous coverage from close-in ＂pop-up＂ targets in clutter to long-range targets impacts selection of waveform parameters. The coherent processing interval （CPI） must be long enough to achieve a certain signal-to-noise ratio （SNR） that ensures the efficiency of detection. The condition of detection in the case of low SNR is analyzed, and three different cases that would occur during integration are discussed and a method to determine the CPI is presented. The simulation results show that targets detection with SNR as low as -26 dB in the experimental system can possibly determine the CPI.

A NOVEL METHOD FOR ESTIMATING THE SNR OF UNKNOWN EMITTER SIGNAL

It is important to estimate the Signal-to-Noise Ratio(SNR) of unknown emitter signal accurately.In order to resolve the disadvantages of present algorithm,a novel method is proposed in this letter.We extract and normalize the information of zero frequency of received signal by the Wigner-Vile Distribution(WVD) transformation and then get the approximate power of original signal by mathematic transformation,at last,we get the estimate value of SNR by the known account formula of SNR.Simulation results show that it is correct and feasible.

Nonsaturation Throughput Enhancement of IEEE 802.11b Distributed Coordination Function for Heterogeneous Traffic under Noisy Environment

In this paper, we propose a mechanism named modified backoff （MB） mechanism to decrease the channel idle time in IEEE 802.11 distributed coordination function （DCF）. In the noisy channel, when signal-to-noise ratio （SNR） is low, applying this mechanism in DCF greatly improves the throughput and lowers the channel idle time. This paper presents an analytical model for the performance study of IEEE 802.11 MB-DCF for nonsaturated heterogeneous traffic in the presence of transmission errors. First, we introduce the MB-DCF and compare its performance to IEEE 802.11 DCF with binary exponential backoff （BEB）. The IEEE 802.11 DCF with BEB mechanism suffers from more channel idle time under low SNR. The MB-DCF ensures high throughput and low packet delay by reducing the channel idle time under the low traffic in the network. However, to the best of the authors＇ knowledge, there are no previous works that enhance the performance of the DCF under imperfect wireless channel. We show through analysis that the proposed mechanism greatly outperforms the original IEEE 802.11 DCF in the imperfect channel condition. The effectiveness of physical and link layer parameters on throughput performance is explored. We also present a throughput investigation of the heterogeneous traffic for different radio conditions.

Hardware implementation of adaptive filter for noise cancellation using TMS320C6713

Daily, we experience the effects of audio noise, which contaminates the original information bearing signal with noise from its surrounding environment. This paper focuses on real-time hardware implementation of multi-tap adaptive noise cancellation （ANC） system by using the least mean square （LMS） algorithm on TMS320C6713 to remove undesired noise from a received signal for various audio related applications. Three different experiments are carried out by considering different audio inputs to test the efficiency of the designed ANC system. The ＇C＇ code implementation of LMS algorithm is introduced and simulated in code composer studio （CCS）, then realized on the digital signal processor （DSP） C6713. The 300 Hz, 500 Hz, 800 Hz, 1 kHz and 3 kHz of tone signals and male speech signal are used as the reference inputs to trace the noise of signal until it is eliminated. The performance of ANC system is studied in terms of convergence speed, order of the filter and signal-to-noise ratio （SNR）. The experimentam results demonstrate that the designed system shows a consider- able improvement in SNR.

Network Sorting Algorithm of Multi-Frequency Signal with Adaptive SNR

An signal noise ratio（ SNR） adaptive sorting algorithm using the time-frequency（ TF）sparsity of frequency-hopping（ FH） signal is proposed in this paper. Firstly,the Gabor transformation is used as TF transformation in the system and a sorting model is established under undetermined condition; then the SNR adaptive pivot threshold setting method is used to find the TF single source. The mixed matrix is estimated according to the TF matrix of single source. Lastly,signal sorting is realized through improved subspace projection combined with relative power deviation of source. Theoretical analysis and simulation results showthat this algorithm has good effectiveness and performance.

Carrier Synchronization for Very Low SNR

The Turbo decoding performance will suffer serious degradation under low signal-to-noise ratios （SNR） conditions for the reason of residual frequency and phase offset in the carrier. In this paper, an improved residual carrier frequency offset estimation algorithm based on a priori probability aided （APPA） phase estimation is proposed. A carrier synchronization loop that combines the iterative turbo decoder and the phase estimator together is constructed, where the extrinsic information obtained from the Turbo decoder is used to aid an iterative phase estimation process. The simulation results show that the algorithm performs successfully under very low SNR conditions （for example, less than -7.4 dB） with large frequency offset and phase error and the performance of this algorithm is very close to the optimally synchronized system.

基于Lowtran软件包和Gabor匹配提高紫外告警系统探测距离

为解决紫外告警探测距离近和红外告警虚警率高的矛盾,提出了一种紫外告警与红外跟踪相复合的应用于地面设备的新型告警/跟踪一体化模式。重点分析了紫外告警系统的探测机理、捕获条件及影响其作用距离的各种因素。基于Lowtran软件包建立了紫外告警系统探测距离估算模型用于精确估算近程固体推进剂导弹的探测距离。考虑UVCCD图像信号处理对探测距离的重要影响,采用基于Gabor特征的图像匹配方案有效提高系统灵敏度。系统仿真实验表明,该模型在系统硬件不变以及虚警率保持1 time/10 h的条件下能将探测距离估算误差控制在5%以内,可将目前紫外告警系统的探测距离由5 km提高到最远8 km,提高了告警系统的探测质量。本方案模型亦可用于其他光电探测设备。

基于自适应估计SNR的分组Turbo码译码算法

针对分组Turbo码自适应Chase译码算法中SNR是预先设定值的情况,提出一种新的自适应估计信噪比(SNR)的译码算法。该方案利用了接收码字的统计信息与SNR之间存在的对应关系来调整门限函数,达到控制译码复杂度的目的。仿真结果表明,所提出的译码算法能自适应反映信道情况,降低译码运算复杂度,提高译码处理速度,获得了较好的性能。

基于SNR比较的协作感知用户选择问题的研究

在实际情况的认知无线电环境下,由于认知用户的感知可靠性存在差异,并不是参与协作的认知用户越多,感知性能越好.综合考虑协作的必要性与协作的增益两方面因素,提出了一种基于信噪比(SNR)比较的协作感知用户选择方案.理论分析及仿真结果一致表明:该方法在有效地提高频谱感知检测性能的同时,减小了参与协作感知的用户数目,提高了协作效率.

LTE-Advanced MIMO低SNR下调制技术性能研究

采用多输入多输出(multiple input multiple output,MIMO)技术来提高无线信道的传输增益,从而提高调制系统中的信噪比、降低调制系统的比特误码率;仿真量化分析了在LTE-Advanced MIMO不同无线场景中,调制系统中信噪比与MIMO技术的天线数,以及调制系统中信噪比与MIMO技术天线的发射功率之间的关系。仿真结果表明,MIMO技术能提高低功率无线场景中调制系统中的信噪比,进而提高调制系统的可靠性。

SNR估计误差对DDEA-Turbo系统的影响

基于数据引导均衡算法(DDEA)的Turbo均衡,求取符号外信息对数似然比(LLR)时需要用到信噪比(或者说噪声方差)信息,在均衡的过程中没法获得准确的信噪比,只能通过估计获得其粗略值。而信噪比的估计误差势必会对均衡的性能产生影响。给出了一种半分析的方法,研究信噪比(SNR)的估计误差对基于DDEA算法的Turbo均衡器性能的影响,相比较于仅靠大量的仿真工作来获取此方面信息的方法来说,该方法省略了很多的仿真工作,而是通过推导的公式计算,所以复杂度降低。通过仿真验证了给出方法的有效性,同时可以看出信噪比过估计对基于DDEA算法的Turbo均衡系统的性能基本不产生什么影响,但是信噪比欠估计会造成误码率的大幅度上升。