The dyeing behavior of cationic dyes to acrylic fiber with self-made low temperature dyeing accelerant was investigated in this study. Compared with conventional dyeing, the acrylic yarn was dyed with Cationic Turquoi...The dyeing behavior of cationic dyes to acrylic fiber with self-made low temperature dyeing accelerant was investigated in this study. Compared with conventional dyeing, the acrylic yarn was dyed with Cationic Turquoise Blue X-GB at 85℃ in the presence of accelerant and absence of accelerant, respectively. The influence of low temperature dyeing aceelerant on the dyeing mechanism of acrylic fiber dyed with cationic dye was analyzed through kinetics and thermodynamics study. The results show that adding dyeing accelerant ran heighten the equilibrium dye-uptake, dyeing rate constants, diffusion coefficients, and shorten half-dyeing time for acrylic fiber dyed with cationic dyes. Furthermore, the partition coefficient, the standard affinity, and the dye saturation value also increased in the dyeing at 85℃.展开更多
In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethyla...In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.展开更多
基金Science and Technology Department of Zhejiang Province,China (No. 2008C01069-4)
文摘The dyeing behavior of cationic dyes to acrylic fiber with self-made low temperature dyeing accelerant was investigated in this study. Compared with conventional dyeing, the acrylic yarn was dyed with Cationic Turquoise Blue X-GB at 85℃ in the presence of accelerant and absence of accelerant, respectively. The influence of low temperature dyeing aceelerant on the dyeing mechanism of acrylic fiber dyed with cationic dye was analyzed through kinetics and thermodynamics study. The results show that adding dyeing accelerant ran heighten the equilibrium dye-uptake, dyeing rate constants, diffusion coefficients, and shorten half-dyeing time for acrylic fiber dyed with cationic dyes. Furthermore, the partition coefficient, the standard affinity, and the dye saturation value also increased in the dyeing at 85℃.
文摘In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.
