High temperature air combustion (HTAC) is an attractive technology of saving energy and controlling environment. The mathematical models of turbulent jet flame under the highly preheated air combustion condition are c...High temperature air combustion (HTAC) is an attractive technology of saving energy and controlling environment. The mathematical models of turbulent jet flame under the highly preheated air combustion condition are conducted in the paper. The mixture fraction/probability density function model is employed. The results show that the maximum flame temperature is decreased, the temperature in the HTAC furnace is more uniform than that in the conventional furnace, and the NO x emission is low. The numerical results are partially validated by some experimental measurements.展开更多
Ying-Qiong Basin is a typical high-temperature and overpressure basin, which is the main battlefield of oil and gas exploration in South China Sea and has made great breakthroughs in recent years. During drilling proc...Ying-Qiong Basin is a typical high-temperature and overpressure basin, which is the main battlefield of oil and gas exploration in South China Sea and has made great breakthroughs in recent years. During drilling process in high pressure, the relationship between the deep and the pressure is directly related to the drilling safety and costs. In order to improve prediction accuracy, the VSP operation is carried out through the midway, and three points have been obtained: 1) The VSP has a higher accuracy of the interface depth in certain depth range of the drill bit. 2) When the low-frequency trend prediction is accurate before the drill bit, interval velocity of the VSP inversion is consistent with the formation velocity. 3) The VSP pressure forecast is based on the inversion layer velocity and under-compaction pressure. If the velocity prediction is not accurate, the pressure forecast must be erroneous. If the pressure has other sources, the formation pressure is not accurate even if the inversion velocity is accurate. The application scope and exploration effect of midway VSP operation are summarized and applied to Ledong 10-1 block in Yinggehai basin, which realize the breakthrough in the field of high temperature overpressure and provide the basis for other similar exploration areas to do VSP operation.展开更多
In order to constrain the crustal wave velocity structure in the southernTibetan crust and provide insight into the contribution of crustal composition, geothermal gradientand partial melting to the velocity structure...In order to constrain the crustal wave velocity structure in the southernTibetan crust and provide insight into the contribution of crustal composition, geothermal gradientand partial melting to the velocity structure, which is characterized by low average crustalvelocities and widespread presence of low-velocity zone(s), the authors model the crustal velocityand density as functions of depth corresponding to various heat flow values in light of velocitymeasurements at high temperature and high pressure. The modeled velocity and density are regarded ascomparison standards. The comparison of the standards with seismic observations in southern Tibetimplies that the predominantly felsic composition at high heat flow cannot explain the observedvelocity structure there. Hence, the authors are in favor of attributing low average crustalvelocities and low-velocity zone(s) observed in southern Tibet mainly to partial melting. Modelingbased on the experimental results suggests that a melting percentage of 7-12 could account for thelow-velocity zone(s).展开更多
文摘High temperature air combustion (HTAC) is an attractive technology of saving energy and controlling environment. The mathematical models of turbulent jet flame under the highly preheated air combustion condition are conducted in the paper. The mixture fraction/probability density function model is employed. The results show that the maximum flame temperature is decreased, the temperature in the HTAC furnace is more uniform than that in the conventional furnace, and the NO x emission is low. The numerical results are partially validated by some experimental measurements.
文摘Ying-Qiong Basin is a typical high-temperature and overpressure basin, which is the main battlefield of oil and gas exploration in South China Sea and has made great breakthroughs in recent years. During drilling process in high pressure, the relationship between the deep and the pressure is directly related to the drilling safety and costs. In order to improve prediction accuracy, the VSP operation is carried out through the midway, and three points have been obtained: 1) The VSP has a higher accuracy of the interface depth in certain depth range of the drill bit. 2) When the low-frequency trend prediction is accurate before the drill bit, interval velocity of the VSP inversion is consistent with the formation velocity. 3) The VSP pressure forecast is based on the inversion layer velocity and under-compaction pressure. If the velocity prediction is not accurate, the pressure forecast must be erroneous. If the pressure has other sources, the formation pressure is not accurate even if the inversion velocity is accurate. The application scope and exploration effect of midway VSP operation are summarized and applied to Ledong 10-1 block in Yinggehai basin, which realize the breakthrough in the field of high temperature overpressure and provide the basis for other similar exploration areas to do VSP operation.
基金supported by the Key Basic Research and Development Program of China(G19980407000)the National Natural Science Foundation of China(40072062)+1 种基金the Foundation of the Open Laboratory of Tectonophysics,China Seismological Bureauthe Post-Doctoral Grant of Ministry of Education,China.
文摘In order to constrain the crustal wave velocity structure in the southernTibetan crust and provide insight into the contribution of crustal composition, geothermal gradientand partial melting to the velocity structure, which is characterized by low average crustalvelocities and widespread presence of low-velocity zone(s), the authors model the crustal velocityand density as functions of depth corresponding to various heat flow values in light of velocitymeasurements at high temperature and high pressure. The modeled velocity and density are regarded ascomparison standards. The comparison of the standards with seismic observations in southern Tibetimplies that the predominantly felsic composition at high heat flow cannot explain the observedvelocity structure there. Hence, the authors are in favor of attributing low average crustalvelocities and low-velocity zone(s) observed in southern Tibet mainly to partial melting. Modelingbased on the experimental results suggests that a melting percentage of 7-12 could account for thelow-velocity zone(s).
