Multi-layer quasi-zero-stiffness meta-structure for high-efficiency vibration isolation at low frequency

An easily stackable multi-layer quasi-zero-stiffness(ML-QZS)meta-structure is proposed to achieve highly efficient vibration isolation performance at low frequency.First,the distributed shape optimization method is used to design the unit cel,i.e.,the single-layer QZS(SL-QZS)meta-structure.Second,the stiffness feature of the unit cell is investigated and verified through static experiments.Third,the unit cells are stacked one by one along the direction of vibration isolation,and thus the ML-QZS meta-structure is constructed.Fourth,the dynamic modeling of the ML-QZS vibration isolation metastructure is conducted,and the dynamic responses are obtained from the equations of motion,and verified by finite element(FE)simulations.Finally,a prototype of the ML-QZS vibration isolation meta-structure is fabricated by additive manufacturing,and the vibration isolation performance is evaluated experimentally.The results show that the vibration isolation performance substantially enhances when the number of unit cells increases.More importantly,the ML-QZS meta-structure can be easily extended in the direction of vibration isolation when the unit cells are properly stacked.Hence,the ML-FQZS vibration isolation meta-structure should be a fascinating solution for highly efficient vibration isolation performance at low frequency.

Spin wave resonance frequency in bilayer ferromagnetic films with the biquadratic exchange interaction

The dependences of spin wave resonance(SWR)frequency on the surface anisotropy field,interface exchange coupling,symmetry,biquadratic exchange(BQE)interaction,film thickness,and the external magnetic field in bilayer ferromagnetic films are theoretically analyzed by employing the linear spin wave approximation and Green’s function method.A remarkable increase of SWR frequency,except for energetically lower two modes,can be obtained in our model that takes the BQE interaction into account.Again,the effect of the external magnetic field on SWR frequency can be increased by increasing the biquadratic to interlayer exchange ratio.It has been identified that the BQE interaction is of utmost importance in improving the SWR frequency of the bilayer ferromagnetic films.In addition,for bilayer ferromagnetic films,the frequency gap between the energetically highest mode and lowest mode is found to increase by increasing the biquadratic to interlayer exchange ratio and film thickness and destroying the symmetry of the system.These results can be used to improve the understanding of magnetic properties in bilayer ferromagnetic films and thus may have prominent implications for future magnetic devices.

A direct laser-synthesized magnetic metamaterial for low-frequency wideband passive microwave absorption

Microwave absorption in radar stealth technology is faced with challenges in terms of its effectiveness in low-frequency regions.Herein,we report a new laser-based method for producing an ultrawideband metamaterial-based microwave absorber with a highly uniform sheet resistance and negative magnetic permeability at resonant frequencies,which results in a wide bandwidth in the L-to S-band.Control of the electrical sheet resistance uniformity has been achieved with less than 5%deviation at 400Ωsq^(-1)and 6%deviation at 120Ωsq^(-1),resulting in a microwave absorption coefficient between 97.2%and 97.7%within a1.56–18.3 GHz bandwidth for incident angles of 0°–40°,and there is no need for providing energy or an electrical power source during the operation.Porous N-and S-doped turbostratic graphene 2D patterns with embedded magnetic nanoparticles were produced simultaneously on a polyethylene terephthalate substrate via laser direct writing.The proposed low-frequency,wideband,wide-incident-angle,and high-electromagnetic-absorption microwave absorber can potentially be used in aviation,electromagnetic interference(EMI)suppression,and 5G applications.

Serum neuronal pentraxin 2 is related to cognitive dysfunction and electroencephalogram slow wave/fast wave frequency ratio in epilepsy

BACKGROUND Cognitive dysfunction in epileptic patients is a high-incidence complication.Its mechanism is related to nervous system damage during seizures,but there is no effective diagnostic biomarker.Neuronal pentraxin 2(NPTX2)is thought to play a vital role in neurotransmission and the maintenance of synaptic plasticity.This study explored how serum NPTX2 and electroencephalogram(EEG)slow wave/fast wave frequency ratio relate to cognitive dysfunction in patients with epilepsy.AIM To determine if serum NPTX2 could serve as a potential biomarker for diagnosing cognitive impairment in epilepsy patients.METHODS The participants of this study,conducted from January 2020 to December 2021,comprised 74 epilepsy patients with normal cognitive function(normal group),37 epilepsy patients with cognitive dysfunction[epilepsy patients with cognitive dysfunction(ECD)group]and 30 healthy people(control group).The minimental state examination(MMSE)scale was used to evaluate cognitive function.We determined serum NPTX2 levels using an enzyme-linked immunosorbent kit and calculated the signal value of EEG regions according to the EEG recording.Pearson correlation coefficient was used to analyze the correlation between serum NPTX2 and the MMSE score.RESULTS The serum NPTX2 level in the control group,normal group and ECD group were 240.00±35.06 pg/mL,235.80±38.01 pg/mL and 193.80±42.72 pg/mL,respectively.The MMSE score was lowest in the ECD group among the three,while no significant difference was observed between the control and normal groups.In epilepsy patients with cognitive dysfunction,NPTX2 level had a positive correlation with the MMSE score(r=0.367,P=0.0253)and a negative correlation with epilepsy duration(r=−0.443,P=0.0061)and the EEG slow wave/fast wave frequency ratio value in the temporal region(r=−0.339,P=0.039).CONCLUSION Serum NPTX2 was found to be related to cognitive dysfunction and the EEG slow wave/fast wave frequency ratio in patients with epilepsy.It is thus a potential biomarker for the diagnosis of cognitive impairment in patients with epilepsy.

Enhanced microwave absorption property of silver decorated biomass ordered porous carbon composite materials with frequency selective surface incorporation

Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.

Wave field structure and power coupling features of blue-core helicon plasma driven by various antenna geometries and frequencies

This paper deals with wave propagation and power coupling in blue-core helicon plasma driven by various antennas and frequencies.It is found that compared to non-blue-core mode,for blue-core mode,the wave can propagate in the core region,and it decays sharply outside the core.The power absorption is lower and steeper in radius for blue-core mode.Regarding the effects of antenna geometry for blue-core mode,it shows that half helix antenna yields the strongest wave field and power absorption,while loop antenna yields the lowest.Moreover,near axis,for antennas with m=+1,the wave field increases with axial distance.In the core region,the wave number approaches to a saturation value at much lower frequency for non-blue-core mode compared to blue-core mode.The total loading resistance is much lower for blue-core mode.These findings are valuable to understanding the physics of blue-core helicon discharge and optimizing the experimental performance of blue-core helicon plasma sources for applications such as space propulsion and material treatment.

Optical frequency comb technology: from ground to space

Optical frequency combs,as powerful tools for precision spectroscopy and research into optical frequency standards,have driven continuous progress and significant breakthroughs in applications such as time-frequency transfer,measurement of fundamental physical constants,and high-precision ranging,achieving a series of milestone results in ground-based environments.With the continuous maturation and evolution of femtosecond lasers and related technologies,optical frequency combs are moving from ground-based applications to astronomical and space-based applications,playing an increasingly important role in atomic clocks,exoplanet observations,gravitational wave measurements,and other areas.This paper,focusing on astronomical and space-based applications,reviews research progress on astronomical frequency combs,optical clock time-frequency networks,gravitational waves,dark matter measurement,dual-comb large-scale absolute ranging,and high-resolution atmospheric spectroscopy.With enhanced performance and their gradual application in the field of space-based research,optical frequency combs will undoubtedly provide more powerful support for astronomical science and cosmic exploration in the future.

Precision measurement and suppression of low-frequency noise in a current source with double-resonance alignment magnetometers

Low-noise high-stability current sources have essential applications such as neutron electric dipole moment measurement and high-stability magnetometers. Previous studies mainly focused on frequency noise above 0.1 Hz while less on the low-frequency noise/drift. We use double resonance alignment magnetometers(DRAMs) to measure and suppress the low-frequency noise of a homemade current source(CS) board. The CS board noise level is suppressed by about 10 times in the range of 0.001-0.1 Hz and is reduced to 100 n A/√Hz at 0.001 Hz. The relative stability of CS board can reach2.2 × 10^(-8). In addition, the DRAM shows a better resolution and accuracy than a commercial 7.5-digit multimeter when measuring our homemade CS board. Further, by combining the DRAM with a double resonance orientation magnetometer,we may realize a low-noise CS in the 0.001-1000 Hz range.

Deformation characteristics and novel strain criteria of strainbursts induced by low-frequency cyclic disturbance

Strainbursts induced by cyclic disturbance with low frequency(termed as cyclicinduced strainbursts)are major dynamic disasters during deep excavation and mining.There is currently no quantitative criterion available for the prediction of such disastrous events.In this study,based on true triaxial experiments,we analyzed the deformation characteristics,established two novel strain criteria for the cyclic-induced strainbursts,and explained the physical meaning of these criteria.Characteristic strains for the cyclic-induced strainbursts were defined,including the control strain ε_(ctr),the strain caused by the combined dynamic and static loading ε_(sd),and the ultimate strain ε_(u) after strainbursts.As indicated by the results,the deformation evolution of the cyclic-induced strainbursts shows remarkable fatigue characteristics,which resemble that of rock subjected to cyclic loading and unloading.In other words,there are three stages during deformation evolution,namely,initial rapid growth,uniform velocity growth after several periods of disturbance,and sudden sharp growth preceding the burst.The ultimate strain ε_(u) is insensitive to the tangential static stress and disturbance amplitude,but it changes nonlinearly with disturbance frequency.From the perspective of deformation,the occurrence of a cyclic-induced strainburst is controlled by the control strainε_(ctr).Thus,a control strain criterion is proposed;that is,when the stain ε_(sd) is larger than the control strain ε_(ctr),a strainburst will be induced by cyclic disturbance.Moreover,based on the statistical results,a strain ratio criterion is proposed;that is,when the strain ratio ε_(sd)/ε_(u) is greater than 30%,a cyclic-induced strainburst will be induced.

TRPV4-induced Neurofilament Injury Contributes to Memory Impairment after High Intensity and Low Frequency Noise Exposures

Objective Exposure to high intensity, low frequency noise(HI-LFN) causes vibroacoustic disease(VAD),with memory deficit as a primary non-auditory symptomatic effect of VAD. However, the underlying mechanism of the memory deficit is unknown. This study aimed to characterize potential mechanisms involving morphological changes of neurons and nerve fibers in the hippocampus, after exposure to HILFN.Methods Adult wild-type and transient receptor potential vanilloid subtype 4 knockout(TRPV4^(-/-)) mice were used for construction of the HI-LFN injury model. The new object recognition task and the Morris water maze test were used to measure the memory of these animals. Hemoxylin and eosin and immunofluorescence staining were used to examine morphological changes of the hippocampus after exposure to HI-LFN.Results The expression of TRPV4 was significantly upregulated in the hippocampus after HI-LFN exposure. Furthermore, memory deficits correlated with lower densities of neurons and neurofilamentpositive nerve fibers in the cornu ammonis 1(CA1) and dentate gyrus(DG) hippocampal areas in wildtype mice. However, TRPV4^(-/-)mice showed better performance in memory tests and more integrated neurofilament-positive nerve fibers in the CA1 and DG areas after HI-LFN exposure.Conclusion TRPV4 up-regulation induced neurofilament positive nerve fiber injury in the hippocampus,which was a possible mechanism for memory impairment and cognitive decline resulting from HI-LFN exposure. Together, these results identified a promising therapeutic target for treating cognitive dysfunction in VAD patients.

A Diagnostic Study on the Relationship between the Assembling of Low Frequency Waves in the Pacific Ocean and the Abnormality of the Subtropical High

By use of the filter analysis technique, the Complex Empirical Othogonal Function (CEOF) method and the ECMWF/WMO 2.5°×2.5°grid data of the geopotential heights during the summer months in 1988, an interseasonal process that the western Pacific subtropical high (WPSH) was anomalously far to the north in the first and second ten days of July is studied. It has been found that in the western Pacific subtropical region in the first and second ten days of July,it is the continuous assembly of low frequency geopotential waves (LFGWs) that leads to the abnormality of WPSH. This abnormality emerges with the enhancement of wave assembling and ceases while the wave assembling situation disappears. The structure of the low frequency assembling waves corresponds to the structure of subtropical high in its abnormal period. The effect of the assembling waves on the abnormality of subtropical high can be considered as the accumulation of disturbance energy carried by the low frequency waves from different directions in the western Pacific region.

A Low Power,High Sensitivity SiGe HBT Static Frequency Divider up to 90 GHz for Millimeter-Wave Application

A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the parasitic effectively and enables self-oscillation frequency enhancement. Besides, bandwidth enhancement techniques based on a center-tap capacitor in input balun design and inductive peaking in latch design are adopted to improve further high frequency performance with low power consumption. As a proof of concept, design of a divide-by-2 static frequency divider in 0.13 μm SiGe BiCMOS technology is reported. With single-ended input clock signal, the divider is measured to be operated from 40 to 90 GHz. Phase noise measurements of a 90 GHz input clock signal indicate ideal behavior with no measurable noise contribution from the divider. The divider followed by a buffer that can deliver more than-10 dBm output power, which is sufficient to drive succeeding stage. To the author's knowledge, the divider exhibits a competitive power dissipation and the highest FOM among silicon based frequency dividers that operating higher than 70 GHz.

DISTRIBUTION OF LOW FREQUENCY WAVES IN NORTH PACIFIC AND INTRASEASONAL ABNORMALITY OF THE WESTERN PACIFIC SUBTROPICAL HIGH

By using ECMWF (2. 5°×2. 5°) grid data, analyzing correlation for the summer (June-August) of 1980 (the West Pacific Subtropical High (WPSH) anomalously more to the south), 1988 (the WPSH anomalously more to the north), 1981 (normal) in the west Pacific area, distribution characteristics of the low frequency waves are discussed. The relationship between distribution of the low frequency waves and intraseasonal abnormality of the west subtropical high is also analyzed. There is some discussions:(1)If the WPSH acts anomalously in summer, there is a distinct zonal wave series in the subtropical zone of the north Pacific.(2) One of the important characteristics of the WPSH abnormality is that there are low frequency geopotential high centres from east Pacific and northeast Asia, being combined in the west Pacific area.For different circulation, the combination areas are different, which define the WSPH anomalously more to the north or south.

Role of Triad Kinetic Energy Interactions for Maintenance of Upper Tropospheric Low Frequency Waves during Summer Monsoon 1988

In order to determine nonlinear energy exchanges into individual triad interactions in the frequency domain,spectral formulas are derived by use of the cross-spectral technique. First time attempt has been made to understandthe problem of maintenance of low frequency waves for tropical weather system by using this technique.The TOGAbasic level ill daily wind analyses on a 2.5 degree square grid around the global zone from 20°S-30°N at 200 hpa for92-day periods covering June, July and August of 1988 are used. Kinetic energy is gained at high frequencies and lostat low frequencies.In the planetary scale dynamics over tropics, barotropic nonlinear energy transfer plays a negativerole.Low frequency wave of period 45 day loses maximum amount of energy when it interacted with frequencies ofperiods 92 day and 30 day.45 day cycle is also the main source of energy for other frequencies. Distrubances of periodl 5 day gain maximum amount of energy.The major contribution comes from the triad interaction of the frequencies<7,l,6>.North of 20'N low frequency waves of period 30 to 92--day gain energy through nonlinear triadinteraction with the maximum gain at 22.5'N. The study may help to investigate the rapid loss of predictability of lowfrequency modes over tropics.

The low-frequency variance of the ocean surface wave field in the area of the Antarctic Circumpolar Current

The low-frequency variance of the surface wave in the area of the Antarctic Circumpolar Current （ACC） and its correlation with the antarctic circumpolar wave （ACW） are focused on. The analysis of the series of 44 a significant wave height （SWH） interannual anomalies reveals that the SWH anomalies have a strong periodicity of about 4-5 a and this signal propagates eastward obviously from 1985 to 1995, which needs about 8 a to complete a mimacircle around the earth. The method of empirical orthogonal function （EOF） is used to analyze the filtered monthly SWH anomalies to study the spatio-temporal distributions and the propagation characteristics of the low-frequency signals in the wave field. Both the dominant wavenumber- 2 pattern in space and the propagation feature in the south Pacific, the south Atlantic and the south Indian ocean show strong consistency with the ACW. So it is reasonable to conclude that the ACW signal also exists in the wave field. The ACW is important for the climate in the Southern Ocean, so it is worth to pay more attention to the large- scale effect of the surface wave, which may also be important for climate studies.

Modeling of low-frequency seismic waves in a shallow sea using the staggered grid difference method

Elastic waves in the seabed generated by low-frequency noise radiating from ships are known as ship seismic waves and can be used to detect and identify ships. To obtain the propagation characteristics of ship seismic waves, an algorithm for calculating Seismic waves at the seafloor is presented based on the staggered-grid finite difference method. The accuracy of the algorithm was tested by comparison with analytical solutions. Numerical simulation of seismic waves generated by a low-frequency point sotmd source in a typical shallow sea environment was carried out. Using various source frequencies and locations in the numerical simulation, we show that the seismic waves in the near field are composed mostly of transmitted S-waves and interface waves while transmitted P-waves are weak near the seafloor. However, in the far field, the wave components of the seismic wave are mainly normal modes and interface waves, with the latter being relatively strong in the waveforms, As the source frequency decreases, the normal modes become smaller and the interface waves dominate the time series of the seismic waves.

Low noise,continuous-wave single-frequency 1.5-μm laser generated by a singly resonant optical parametric oscillator

We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was pumped by a CW single-frequency Nd：YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit （SNL） at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz.

Research on the Seismic Wave Characteristics of Low Frequency Signals before the Alxa Left Banner MS5.8 Earthquake in Inner Mongolia,China

In order to search for the seismic wave characteristics of low frequency signals in the Alxa Left Banner region,Inner Mongolia,the low frequency signals of seismic wave data are extracted from the earthquakes of MS5. 8 in 2015 and MS5. 0 in 2016 in this area. The results show that:① Before the MS5. 8 earthquake,the seismic stations located near the epicenter in Wuhai,Dongshengmiao,and Shizuishan recorded seismic waves that showed the phenomenon of spectrum shift from high to low frequency.② The low frequency signals recorded by different stations have obvious difference.③ According to the data recorded by the station closest to the epicenter,low-frequency signals were recorded about120 hours before the earthquake and had obvious anomalies. This may reflect slow slip before the earthquake.

Nonlinear continuous bi-inductance electrical line with dissipative elements:Dynamics of the low frequency modulated waves

The dynamics of modulated waves in a nonlinear bi-inductance transmission line with dissipative elements are examined.We show the existence of two frequency modes and carry out intensive investigations on the low frequency mode.Thanks to the multiple scales method,the behavior of these waves is investigated and the dissipative effects are analyzed.It appears that the dissipation coefficient increases with the carrier wave frequency.In the continuous approximation,we derive that the propagation of these waves is governed by the complex Ginzburg-Landau equation instead of the Korteweg-de-Vries equation as previously established.Asymptotic studies of the dynamics of plane waves in the line reveal the existence of three additional regions in the dispersion curve where the modulational phenomenon is observed.In the low frequency mode,we demonstrate that the network allows the propagation of dark and bright solitons.Numerical findings are in perfect agreement with the analytical predictions.

A New Current Conveyor Full-Wave Rectifier for Low Frequency/Small Signal Medical Applications

This paper presents a new current conveyor (CCII+) full-wave rectifier for low frequency/small signal medical applications. The proposed rectifier is based on the current conveyor full-wave rectifier proposed previously, but the proposed rectifier is better in view of no need diodes to rectify, and no need bias sources to overcome the zero crossing error. It needs only two CCII+s, two resistors, and three simple current mirrors, which is easy for IC implementation and for building in many countries. The PSPICE simulation with the current conveyor CCII+ in the current feedback opamp AD844 IC and the 2N2222 bipolar current mirror shows the good low frequency/small signal rectification, the operation voltage of down to 6 .