Strategic deliberation on development of low-carbon energy system in China

In recent years, there have been considerable developments in energy provision with the growing improvements in energy supply security and support systems in China. However, China's energy system continues to retain a high-carbon feature where coal dominates energy production and consumption, which has led to the rapid growth of greenhouse gas emissions and associated serious environmental pollution. It has therefore become an important task for China to consider how to promote the low-carbon development of energy system. This paper summarized the basic trends and challenges for development of low-carbon energy system in China and studied the primary energy consumption and carbon emissions in different scenarios at 10-year intervals between 2010 and 2050. The analysis showed that controlling coal consumption will have an important influence on the control of total carbon emissions and of carbon emission peaking; promotion of non-fossil fuel energies will offer a growing contribution to a low-carbon transition in the medium and long term; the development of carbon capture, utilization, and storage will play a key role in realizing a deep decarbonization pathway, particularly after 2030; and the establishment of a low-carbon power system is crucial for the achievement of low-carbon energy transition. Finally, the strategic considerations and policy suggestions on the development of low-carbon energy systems in China are explored.

Demand Responsive Market Decision-Makings and Electricity Pricing Scheme Design in Low-Carbon Energy System Environment

The two-way interaction between smart grid and customers will continuously play an important role in enhan-cing the overall efficiency of the green and low-carbon electric power industry and properly accommodating intermittent renewable energy resources.Thus far,the existing electricity pricing mechanisms hardly match the technical properties of smart grid;neither can they facilitate increasing end users participating in the electri-city market.In this paper,several relevant models and novel methods are proposed for pricing scheme design as well as to achieve optimal decision-makings for market participants,in which the mechanisms behind are com-patible with demand response operation of end users in the smart grid.The electric vehicles and prosumers are jointly considered by complying with the technical constraints and intrinsic economic interests.Based on the demand response of controllable loads,the real-time pricing,rewarding pricing and insurance pricing methods are proposed for the retailers and their bidding decisions for the wholesale market are also presented to increase the penetration level of renewable energy.The proposed demand response oriented electricity pricing scheme can provide some useful operational references on the cooperative operation of controllable loads and renewable energy through the feasible retail and wholesale market pricing methods,and thereby enhancing the development of the low-carbon energy system.

Scaling up private investment in low-carbon energy systems through regional cooperation: Effective trade policy measures

How to ensure energy supply and reduce environment pollution have turned into governments’ top priorities and key factors to maintain sustainable development. In this context, two major trade and investment agreements that could lead to profound influence on low-carbon energy systems development around the Asia-Pacific region are the Regional comprehensive economic partnership (RCEP) consisted of the Association of Southeast Asian Nations (ASEAN) plus Australia, China, India, Japan, New Zealand, and Republic of Korea and the Belt and road initiative (BRI) initiated by China. In order to have a smooth transition to low-carbon energy systems in Asia, besides RCEP and BRI, it is imperative to boost private sector investment. Success of encouraging private sector investment depends on appropriate government policies towards promoting innovations and reducing financial risks to private investors. The research questions that are examined in this study are: What type of policy measures affects trade in low-carbon transition, particularly renewable energy (RE) transition? How can investment signals and incentives be reframed to scale up private finance in RE? The objective is to investigate and to provide several feasible trade policy and investment policy tools for both national and regional markets that governments could adopt to accelerate the speed of private financing of the low-carbon energy industry, particularly the RE industry.

DISTRIBUTING ENERGY AS NEEDED A system anchored with clean energy could be an effective way to achieve green low-carbon energy transformation

China has a big demand for energy but limited energy resources.To achieve green and low-carbon development,it must accelerate construction of a distributed energy system(DES)with high energy utilization efficiency and low environmental pollution,which will be a tremendously significant step towards the country’s goals of peaking carbon emissions by 2030 and achieving carbon neutrality by 2060(the“3060”target).

Shaping future low-carbon energy and transportation systems: Digital technologies and applications

Digitalization and decarbonization are projected to be two major trends in the coming decades.As the already widespread process of digitalization continues to progress,especially in energy and transportation systems,massive data will be produced,and how these data could support and promote decarbonization has become a pressing concern.This paper presents a comprehensive review of digital technologies and their potential applications in low-carbon energy and transportation systems from the perspectives of infrastructure,common mechanisms and algorithms,and system-level impacts,as well as the application of digital technologies to coupled energy and transportation systems with electric vehicles.This paper also identifies corresponding challenges and future research directions,such as in the field of blockchain,digital twin,vehicle-to-grid,low-carbon computing,and data security and pri-vacy,especially in the context of integrated energy and transportation systems.

Investigating and predicting the role of photovoltaic, wind, and hydrogen energies in sustainable global energy evolution

The global shift toward next-generation energy systems is propelled by the urgent need to combat climate change and the dwindling supply of fossil fuels.This review explores the intricate challenges and opportunities for transitioning to sustainable renewable energy sources such as solar,wind,and hydrogen.This transition economically challenges traditional energy sectors while fostering new industries,promoting job growth,and sustainable economic development.The transition to renewable energy demands social equity,ensuring universal access to affordable energy,and considering community impact.The environmental benefits include a significant reduction in greenhouse gas emissions and a lesser ecological footprint.This study highlights the rapid growth of the global wind power market,which is projected to increase from$112.23 billion in 2022 to$278.43 billion by 2030,with a compound annual growth rate of 13.67%.In addition,the demand for hydrogen is expected to increase,significantly impacting the market with potential cost reductions and making it a critical renewable energy source owing to its affordability and zero emissions.By 2028,renewables are predicted to account for 42%of global electricity generation,with significant contributions from wind and solar photovoltaic(PV)technology,particularly in China,the European Union,the United States,and India.These developments signify a global commitment to diversifying energy sources,reducing emissions,and moving toward cleaner and more sustainable energy solutions.This review offers stakeholders the insights required to smoothly transition to sustainable energy,setting the stage for a resilient future.

Low-Carbon Dispatch of an Integrated Energy System Considering Confidence Intervals for Renewable Energy Generation

Addressing the insufficiency in down-regulation leeway within integrated energy systems stemming from the erratic and volatile nature of wind and solar renewable energy generation,this study focuses on formulating a coordinated strategy involving the carbon capture unit of the integrated energy system and the resources on the load storage side.A scheduling model is devised that takes into account the confidence interval associated with renewable energy generation,with the overarching goal of optimizing the system for low-carbon operation.To begin with,an in-depth analysis is conducted on the temporal energy-shifting attributes and the low-carbon modulation mechanisms exhibited by the source-side carbon capture power plant within the context of integrated and adaptable operational paradigms.Drawing from this analysis,a model is devised to represent the adjustable resources on the charge-storage side,predicated on the principles of electro-thermal coupling within the energy system.Subsequently,the dissimilarities in the confidence intervals of renewable energy generation are considered,leading to the proposition of a flexible upper threshold for the confidence interval.Building on this,a low-carbon dispatch model is established for the integrated energy system,factoring in the margin allowed by the adjustable resources.In the final phase,a simulation is performed on a regional electric heating integrated energy system.This simulation seeks to assess the impact of source-load-storage coordination on the system’s low-carbon operation across various scenarios of reduction margin reserves.The findings underscore that the proactive scheduling model incorporating confidence interval considerations for reduction margin reserves effectively mitigates the uncertainties tied to renewable energy generation.Through harmonized orchestration of source,load,and storage elements,it expands the utilization scope for renewable energy,safeguards the economic efficiency of system operations under low-carbon emission conditions,and empirically validates the soundness and efficacy of the proposed approach.

Heavy ion energy influence on multiple-cell upsets in small sensitive volumes:from standard to high energies

The 28 nm process has a high cost-performance ratio and has gradually become the standard for the field of radiation-hardened devices.However,owing to the minimum physical gate length of only 35 nm,the physical area of a standard 6T SRAM unit is approximately 0.16μm^(2),resulting in a significant enhancement of multi-cell charge-sharing effects.Multiple-cell upsets(MCUs)have become the primary physical mechanism behind single-event upsets(SEUs)in advanced nanometer node devices.The range of ionization track effects increases with higher ion energies,and spacecraft in orbit primarily experience SEUs caused by high-energy ions.However,ground accelerator experiments have mainly obtained low-energy ion irradiation data.Therefore,the impact of ion energy on the SEU cross section,charge collection mechanisms,and MCU patterns and quantities in advanced nanometer devices remains unclear.In this study,based on the experimental platform of the Heavy Ion Research Facility in Lanzhou,low-and high-energy heavy-ion beams were used to study the SEUs of 28 nm SRAM devices.The influence of ion energy on the charge collection processes of small-sensitive-volume devices,MCU patterns,and upset cross sections was obtained,and the applicable range of the inverse cosine law was clarified.The findings of this study are an important guide for the accurate evaluation of SEUs in advanced nanometer devices and for the development of radiation-hardening techniques.

Crosstalk between degradation and bioenergetics: how autophagy and endolysosomal processes regulate energy production

Cells undergo metabolic reprogramming to adapt to changes in nutrient availability, cellular activity, and transitions in cell states. The balance between glycolysis and mitochondrial respiration is crucial for energy production, and metabolic reprogramming stipulates a shift in such balance to optimize both bioenergetic efficiency and anabolic requirements. Failure in switching bioenergetic dependence can lead to maladaptation and pathogenesis. While cellular degradation is known to recycle precursor molecules for anabolism, its potential role in regulating energy production remains less explored. The bioenergetic switch between glycolysis and mitochondrial respiration involves transcription factors and organelle homeostasis, which are both regulated by the cellular degradation pathways. A growing body of studies has demonstrated that both stem cells and differentiated cells exhibit bioenergetic switch upon perturbations of autophagic activity or endolysosomal processes. Here, we highlighted the current understanding of the interplay between degradation processes, specifically autophagy and endolysosomes, transcription factors, endolysosomal signaling, and mitochondrial homeostasis in shaping cellular bioenergetics. This review aims to summarize the relationship between degradation processes and bioenergetics, providing a foundation for future research to unveil deeper mechanistic insights into bioenergetic regulation.

MXene Hybridized Polymer with Enhanced Electromagnetic Energy Harvest for Sensitized Microwave Actuation and Self‑Powered Motion Sensing

Polymeric microwave actuators combining tissue-like softness with programmablemicrowave-responsive deformation hold great promise for mobile intelligentdevices and bionic soft robots. However, their application is challenged by restricted electromagneticsensitivity and intricate sensing coupling. In this study, a sensitized polymericmicrowave actuator is fabricated by hybridizing a liquid crystal polymer with Ti3C2Tx(MXene). Compared to the initial counterpart, the hybrid polymer exhibits unique spacechargepolarization and interfacial polarization, resulting in significant improvements of230% in the dielectric loss factor and 830% in the apparent efficiency of electromagneticenergy harvest. The sensitized microwave actuation demonstrates as the shortenedresponse time of nearly 10 s, which is merely 13% of that for the initial shape memory polymer. Moreover, the ultra-low content of MXene (upto 0.15 wt%) benefits for maintaining the actuation potential of the hybrid polymer. An innovative self-powered sensing prototype that combinesdriving and piezoelectric polymers is developed, which generates real-time electric potential feedback (open-circuit potential of ~ 3 mV) duringactuation. The polarization-dominant energy conversion mechanism observed in the MXene-polymer hybrid structure furnishes a new approachfor developing efficient electromagnetic dissipative structures and shows potential for advancing polymeric electromagnetic intelligent devices.

Defect Engineering with Rational Dopants Modulation for High‑Temperature Energy Harvesting in Lead‑Free Piezoceramics

High temperature piezoelectric energy harvester(HTPEH)is an important solution to replace chemical battery to achieve independent power supply of HT wireless sensors.However,simultaneously excellent performances,including high figure of merit(FOM),insulation resistivity(ρ)and depolarization temperature(Td)are indispensable but hard to achieve in lead-free piezoceramics,especially operating at 250°C has not been reported before.Herein,well-balanced performances are achieved in BiFeO3–BaTiO3 ceramics via innovative defect engineering with respect to delicate manganese doping.Due to the synergistic effect of enhancing electrostrictive coefficient by polarization configuration optimization,regulating iron ion oxidation state by high valence manganese ion and stabilizing domain orientation by defect dipole,comprehensive excellent electrical performances(Td=340°C,ρ250°C>10^(7)Ωcm and FOM_(250°C)=4905×10^(–15)m^(2)N^(−1))are realized at the solid solubility limit of manganese ions.The HT-PEHs assembled using the rationally designed piezoceramic can allow for fast charging of commercial electrolytic capacitor at 250°C with high energy conversion efficiency(η=11.43%).These characteristics demonstrate that defect engineering tailored BF-BT can satisfy high-end HT-PEHs requirements,paving a new way in developing selfpowered wireless sensors working in HT environments.

Energy Efficient Dual User Association for Large Scale IRS-Aided mmWave Communication Networks

The deployment of multiple intelligent reflecting surfaces(IRSs)in blockage-prone millimeter wave(mmWave)communication networks have garnered considerable attention lately.Despite the remarkably low circuit power consumption per IRS element,the aggregate energy consumption becomes substantial if all elements of an IRS are turned on given a considerable number of IRSs,resulting in lower overall energy efficiency(EE).To tackle this challenge,we propose a flexible and efficient approach that individually controls the status of each IRS element.Specifically,the network EE is maximized by jointly optimizing the associations of base stations(BSs)and user equipments(UEs),transmit beamforming,phase shifts of IRS elements,and the associations of individual IRS elements and UEs.The problem is efficiently addressed in two phases.First,the Gale-Shapley algorithm is applied for BS-UE association,followed by a block coordinate descent-based algorithm that iteratively solves the subproblems related to active beamforming,phase shifts,and element-UE associations.To reduce the tremendous dimensionality of optimization variables introduced by element-UE associations in large-scale IRS networks,we introduce an efficient algorithm to solve the associations between IRS elements and UEs.Numerical results show that the proposed elementwise control scheme improves EE by 34.24% compared to the network with IRS-all-on scheme.

An Energy Management System with Mobile Energy Station Based Wireless Energy Transfer:System Design and Prototype Implementation

In indoor environments,various batterypowered Internet of Things(IoT)devices,such as remote controllers and electronic tags on high-level shelves,require efficient energy management.However,manually monitoring remaining energy levels and battery replacement is both inadequate and costly.This paper introduces an energy management system for indoor IoT,which includes a mobile energy station(ES)for enabling on-demand wireless energy transfer(WET)in radio frequency(RF),some energy receivers(ERs),and a cloud server.By implementing a two-stage positioning system and embedding energy receivers into traditional IoT devices,we robustly manage their energy storage.The experimental results demonstrate that the energy receiver can harvest a minimum power of 58 mW.

Plasma-electrified up-carbonization for low-carbon clean energy

Low-value,renewable,carbon-rich resources,with different biomass feedstocks and their derivatives as typical examples,represent virtually inexhaustive carbon sources and carbon-related energy on Earth.Upon conversion to higher-value forms(referred to as“up-carbonization”here),these abundant feedstocks provide viable opportunities for energy-rich fuels and sustainable platform chemicals production.However,many of the current methods for such up-carbonization still lack sufficient energy,cost,and material efficiency,which affect their economics and carbon-emissions footprint.With external electricity precisely delivered,discharge plasmas enable many stubborn reactions to occur under mild conditions,by creating locally intensified and highly reactive environments.This technology emerges as a novel,versatile technology platform for integrated or stand-alone conversion of carbon-rich resources.The plasma-based processes are compatible for integration with increasingly abundant and cost-effective renewable electricity,making the whole conversion carbon-neutral and further paving the plasma-electrified upcarbonization to be performance-,environment-,and economics-viable.Despite the chief interest in this emerging area,no review article brings together the state-of-the-art results from diverse disciplines and underlies basic mechanisms and chemistry underpinned.As such,this review aims to fill this gap and provide basic guidelines for future research and transformation,by providing an overview of the application of plasma techniques for carbon-rich resource conversion,with particular focus on the perspective of discharge plasmas,the fundamentals of why plasmas are particularly suited for upcarbonization,and featured examples of plasma-enabled resource valorization.With parallels drawn and specificity highlighted,we also discuss the technique shortcomings,current challenges,and research needs for future work.

Trends and driving forces of low-carbon energy technology innovation in China’s industrial sectors from 1998 to 2017: from a regional perspective

Low-carbon energy technology(LC)innovation contributes to both environmental protection and economic development.Using the panel data of 30 provinces/autonomous regions/municipalities in China from 1998 to 2017,this paper constructs a two-layer logarithmic mean Divisia index(LMDI)model to uncover the factors influencing the variation of the innovation of LC in China’s industrial sectors,including the alternative energy production technology(AEPT)and the energy conversation technology(ECT).The results show that China’s industrial LC patent applications rapidly increased after 2005 and AEPT patent applications outweighed ECT patent applications all the time with a gradually narrowing gap.Low-carbon degree played the dominant role in promoting the increase in China’s industrial LC patent applications,followed by the economic scale,R&D(research and development)efficiency,and R&D share.Economic structure contributed to the increases in LC patent applications in the central and the western regions,while led to the decreases in the eastern region,the north-eastern region,and Chinese mainland.Low-carbon degree and economic scale were two main contributors to the growths of both industrial AEPT patent applications and ECT patent applications in Chinese mainland and the four regions.Several policy recommendations are made to further promote industrial innovation in China.

Low-carbon and Energy-saving Designs Preserving Primitive Ecological Conditions——With the Planning of Ancient Banyan Park in Mengshan County,Guangxi,China as a Case Study

It was proposed that park planning should be based on local economic development,should focus on the preservation of primitive ecological conditions and the application of low-carbon and energy-saving concepts.The planning of Ancient Banyan Park in Mengshan County by following the principles of respecting local history and culture,improving functions and supporting facilities,human-centered,overall planning and all-around consideration,respecting characteristics of the local area(the planning site),satisfying operation requirements of the park,applying low-carbon and energy-saving concepts,and avoiding over-engineering,aimed at protecting natural images of the park,primitive history,culture and characteristics of the local area and providing a space for local residents' various activities.Modern aesthetic forms were combined,cultural connotation of natural environment stressed to build a landscape space system of the Ancient Banyan Park that matches well with environment of the planning site.The park was designed into 4 functional areas:sport area,fitness plaza area,garden recreational area and ancient banyan cultural area.Different functions of these subareas were taken into consideration to create conservation-minded garden landscapes which were both independent and unified.

Low-carbon generation expansion planning considering uncertainty of renewable energy at multi-time scales

With the development of carbon electricity,achieving a low-carbon economy has become a prevailing and inevitable trend.Improving low-carbon expansion generation planning is critical for carbon emission mitigation and a lowcarbon economy.In this paper,a two-layer low-carbon expansion generation planning approach considering the uncertainty of renewable energy at multiple time scales is proposed.First,renewable energy sequences considering the uncertainty in multiple time scales are generated based on the Copula function and the probability distribution of renewable energy.Second,a two-layer generation planning model considering carbon trading and carbon capture technology is established.Specifically,the upper layer model optimizes the investment decision considering the uncertainty at a monthly scale,and the lower layer one optimizes the scheduling considering the peak shaving at an hourly scale and the flexibility at a 15-minute scale.Finally,the results of different influence factors on low-carbon generation expansion planning are compared in a provincial power grid,which demonstrate the effectiveness of the proposed model.

The relationship between energy consumption and economic growth and the development strategy of a low-carbon economy in Kazakhstan

Fossil energy is the material basis of human survival, economic development and social progress. The relationship between energy consumption and economic growth is becoming increasingly close. However, energy consumption is the major source of greenhouse gases, which can significantly affect the balance of the global ecosystem. It has become the common goal of countries worldwide to address climate change, reduce carbon dioxide emissions, and implement sustainable development strategies. In this study, we applied an approximate relationship analysis, a decoupling relationship analysis, and a trend analysis to explore the relationship between energy consumption and economic growth using data from Kazakhstan for the period of 1993-2010. The results demonstrated： （1） the total energy consumption and GDP in Kazakhstan showed a ＂U＂-type curve from 1993 to 2010. This curve was observed because 1993-1999 was a period during which Kazakhstan transitioned from a republic to an independent country and experienced a difficult transition from a planned to a market economy. Then, the economic system became more stable and the industrial production increased rapidly because of the effective financial, monetary and industrial policy support from 2000 to 2010. （2） The relationships between energy con- sumption and carbon emissions, economic growth and energy exports were linked; the carbon emissions were mainly derived from energy consumption, and the dependence of economic growth on energy exports gradually increased from 1993 to 2010. Before 2000, the relationship between energy consumption and economic growth was in a recessional decoupling state because of the economic recession. After 2000, this relationship was in strong and weak decoupling states because the international crude oil prices rose and energy exports increased greatly year by year. （3） It is forecasted that Kazakhstan cannot achieve its goal of energy consumption by 2020. Therefore, a low-carbon economy is the best strategic choice to address climate change from a global perspective in Kazakhstan. Thus, we proposed strategies including the improvement of the energy consumption structure, the development of new energy and renewable energy, the use of cleaner production technologies, the adjustment and optimization of the industrial structure, and the expansion of forest areas.

Studies on heteronuclear diatomic molecular dissociation energies using algebraic energy method

The algebraic energy method （AEM） is applied to the study of molecular dissociation energy De for 11 heteronuclear diatomic electronic states： a^3∑＋ state of NaK, X^2∑＋ state of XeBr, X^2∑＋ state of HgI, X^1∑＋ state of LiH, A3∏（1） state of IC1, X^1∑＋ state of CsH, A（3∏1） and B0＋（3∏） states of CIF, 21∏ state of KRb, X^1∑＋ state of CO, and c^3∑＋ state of NaK molecule. The results show that the values of De computed by using the AEM are satisfactorily accurate compared with experimental ones. The AEM can serve as an economic and useful tool to generate a reliable De within an allowed experimental error for the electronic states whose molecular dissociation energies are unavailable from the existing literature

Energy-Saving Construction Technologies for Buildings

The development of the construction industry is shifting towards low-carbon construction,so it is necessary to improve and optimize related construction concepts,methods,and processes.By improving resource and energy control efficiency in building projects,minimizing construction waste,and reducing environmental impact,a foundation for the sustainable development of the industry can be established.This paper mainly analyzes the significance of low-carbon energy-saving construction technology and the control factors of construction,summarizes the status quo of the development of building energy-saving construction,and puts forward strategies for applying building energy-saving construction technology.These strategies serve to achieve low-carbon and energy-saving goals to promote the healthy development of energy-saving construction.