The Roles of Low-level Jets in “21·7” Henan Extremely Persistent Heavy Rainfall Event

An extremely heavy rainfall event lasting from 17 to 22 July 2021 occurred in Henan Province of China, with accumulated precipitation of more than 1000 mm over a 6-day period that exceeded its mean annual precipitation. The present study examines the roles of persistent low-level jets(LLJs) in maintaining the precipitation using surface station observations and reanalysis datasets. The LLJs triggered strong ascending motions and carried moisture mainly from the outflow of Typhoon In-fa(2021). The varying directions of the LLJs well corresponded to the meridional shifts of the rainfall. The precipitation rate reached a maximum during 20-21 July as the LLJs strengthened and expanded vertically into double LLJs, including synoptic-weather-system-related LLJs(SLLJs) at 850–700 hPa and boundary-layer jets(BLJs)at ~950 hPa. The coupling of the SLLJ and BLJ provided strong mid-and low-level convergence on 20 July, whereas the SLLJ produced mid-level divergence at its entrance that coupled with low-level convergence at the terminus of the BLJ on21 July. The formation mechanisms of the two types of LLJs are further examined. The SLLJs and the low-pressure vortex(or inverted trough) varied synchronously as a whole and were affected by the southwestward movement of the WPSH in the rainiest period. The persistent large total pressure gradient force at low levels also maintained the strength of low-level geostrophic winds, thus sustaining the BLJs on the synoptic scale. The results based on a Du-Rotunno 1D model show that the Blackadar and Holton mechanisms jointly governed the BLJ dynamics on the diurnal scale.

Analysis of the Characteristics of the Low-level Jets in the Middle Reaches of the Yangtze River during the Mei-yu Season

Here,we analyze the characteristics and the formation mechanisms of low-level jets(LLJs)in the middle reaches of the Yangtze River during the 2010 mei-yu season using Wuhan station radiosonde data and the fifth generation of the European Centre for Medium-Range Weather Forecasts(ERA5)reanalysis dataset.Our results show that the vertical structure of LLJs is characterized by a predominance of boundary layer jets(BLJs)concentrated at heights of 900-1200 m.The BLJs occur most frequently at 2300 LST(LST=UTC+8 hours)but are strongest at 0200 LST,with composite wind velocities>14 m s^(-1).Synoptic-system-related LLJs(SLLJs)occur most frequently at 0800 LST but are strongest at 1100LST,with composite wind velocities>12 m s^(-1).Both BLJs and SLLJs are characterized by a southwesterly wind direction,although the wind direction of SLLJs is more westerly,and northeasterly SLLJs occur more frequently than northeasterly BLJs.When Wuhan is south of the mei-yu front,the westward extension of the northwest Pacific subtropical high intensifies,and the low-pressure system in the eastern Tibetan Plateau strengthens,favoring the formation of LLJs,which are closely related to precipitation.The wind speeds on rainstorm days are greater than those on LLJ days.Our analysis of four typical heavy precipitation events shows the presence of LLJs at the center of the precipitation and on its southern side before the onset of heavy precipitation.BLJs were shown to develop earlier than SLLJs.

Formation of Low-Level Jets over Southern China in the Mei-yu Season

This study examines the diversity of low-level jet(LLJ)formation and related physical processes over southern China.A total of 171 LLJ formation events with enhanced daily southwesterlies and early-morning maximum wind speeds were observed during the mei-yu seasons of 1989–2018.The LLJs can be further categorized into four types based on the increases in the daily mean and diurnal amplitude of the low-level winds.Analysis of the synoptic-scale disturbances shows that the two types of LLJ formation(Q1 and Q4),which feature large increases of daily southerly wind components,are mainly induced by west-east dipole patterns of pressure change,in association with the enhanced southwest vortex and/or the western Pacific subtropical high(WPSH).In contrast,the other two types(Q2 and Q3),which feature relatively large increases in their daily westerly components,are related to a northwest-southeast dipole pattern of pressure change due to the mid-latitude trough and the WPSH.We further analyze the considerable variations in the diurnal thermal forcing among the LLJ formation events.The strong(weak)daytime heating of solar radiation leads to relatively large(small)increases in the diurnal amplitude of low-level winds in Q1 and Q2(Q3 and Q4)types.Therefore,different combinations of synopticscale disturbances and diurnal thermal forcings are found to account for the diversity in LLJ formation and associated differences in downstream rainfall patterns.These results help to improve our understanding and prediction of the formation of LLJs.

Thermodynamics and Microphysical Characteristics of an Extreme Rainfall Event Under the Influence of a Low-level Jet over the South China Coast

In this paper,the data of Automatic Weather Stations(AWSs),ERA5 reanalysis,sounding,wind profile radar,and dual-polarization radar are used to study an extreme rainfall event in the south China Coast on 11 to 12 May 2022 from the aspects of thermodynamics and microphysical characteristics under the influence of low-level jets(LLJs).Results show that:(1)The extreme rainfall event can be divided into two stages:the first stage(S1)from 0000 to 0600 LST on May 12 and the second stage(S2)from 0700 to 1700 LST on the same day.During S1,the rainfall is mainly caused by the upper-level shortwave trough and the boundary layer jet(BLJ),characterized by strong upward motion on the windward side of mountains.In S2,the combined influence of the BLJ and synoptic-system-related low-level jet(SLLJ)increases the vertical wind shear and vertical vorticity,strengthening the rainstorm.In combination with the effect of topography,a warm and humid southwest flow continuously transports water vapor to farther north,resulting in a significant increase in rainfall over the study area(on the terrain’s windward slope).From S1 to S2,the altitude of a divergence center in the upper air decreases obviously.(2)The rainfalls in the two stages are both associated with the mesoscale convergence line(MCL)on the surface,and the wind field from the mesoscale outflow boundary(MOB)in S1 is in the same direction as the environmental winds.Due to a small area of convergence that is left behind the MOB,convection moves eastward quickly and causes a short duration of heavy rainfall.In S2,the convergence along the MOB is enhanced,which strengthens the rainfall and leads to strong outflows,further enhancing the surface convergence near the MOB and forming a positive feedback mechanism.It results in a slow motion of convection and a long duration of heavy rainfall.(3)In terms of microphysics,the center of a strong echo in S1 is higher than in S2.The warm-rain process of the oceanic type characterizes both stages,but the convective intensity in S2 is significantly stronger than that in S1,featuring bigger drop sizes and lower concentrations.It is mainly due to the strengthening of LLJs,which makes small cloud droplets lift to melting levels,enhancing the ice phase process(riming process),producing large amounts of graupel particles and enhancing the melting and collision processes as they fall,resulting in the increase of liquid water content(LWC)and the formation of large raindrops near the surface.

A Study of the Relationship between Low-level Jet and inversion Layer over an Agroforest Ecosystem in East China Plain

The relationship between the super–low–level jet (LLJ) and inversion layer over an agroforest ecosystem on the Huang–Huai–Hai plain in the eastern China is studied by means of a time–independent K–closure model. It is found that the intensified inversion near the surface of a luxuriantly growing agroforest ecosystem leads to the formation and development of the LLJ, the more intense the inversion, the stronger is the LLJ. The critical value of inversion intensity index for the LLJ formation is 0.75°C/ 100 m, which relates to the necessary geostraphic wind velocity of 6.0 to 10 m / s at the top level of the model. The numerical calculations show that the roughness length of the underlying surface has considerable effects on the LLJ structure. Key words Low?level jet - Temperature inversion - Agroforest ecosystem The project was supported by the National Natural Science Foundation of China (NSFC) (49975016).

Excitation of Low-level Jet as Seen by GOES (I-O) Satellite off the Somali Coast

The intensification of a low-level jet off the Somali coast, as observed through GOES (I-O) satellite during Indian summer monsoon 1979 has been studied. Excitation of Low-level cross-equatorial flow in the western Indian ocean results from an interaction between extratropical perturbations moving eastward across the South African-Malgassy region of the Southern Hemisphere. This excitation occurs 2-3 days after the first appearance of a northward propagation cold front across the South African-Malgassy region. Inten-sification of cross-equatorial flow is followed by an increase in rainfall activity along the west coast of India after 3-4 days. The study reveals that this association can be used to forecast an increase in rainfall activity along the west coast of India 5-7 days in advance.

Role of the Nocturnal Low-level Jet in the Formation of the Morning Precipitation Peak over the Dabie Mountains

The diurnal variation of precipitation over the Dabie Mountains(DBM) in eastern China during the 2013 mei-yu season is investigated with forecasts of a regional convection-permitting model. Simulated precipitation is verified against surface rain-gauge observations. The observed morning precipitation peak on the windward(relative to the prevailing synoptic-scale wind) side of the DBM is reproduced with good spatial and temporal accuracy. The interaction between the DBM and a nocturnal boundary layer low-level jet(BLJ) due to the inertial oscillation mechanism is shown to be responsible for this precipitation peak. The BLJ is aligned with the lower-level southwesterly synoptic-scale flow that carries abundant moisture.The BLJ core is established at around 0200 LST upwind of the mountains. It moves towards the DBM and reaches maximum intensity at about 70 km ahead of the mountains. When the BLJ impinges upon the windward side of the DBM in the early morning, mechanical lifting of moist air leads to condensation and subsequent precipitation.

Low-Level Jets over Southeast China: The Warm Season Climatology of the Summer of 2003

The southwesterly low-level jet (LLJ) over southeast China in the summer of 2003 is analyzed in this study. The analysis is based on the National Centers for Environmental Prediction (NCEP) Final (FNL) operational global analysis data on 1.0×1.0-degree grids at 6-h intervals. The major criteria for choosing the LLJ included the following: a maximum wind speed equal to or greater than 12.0 m s -1 , a wind direction of between 180° and 270°, and the height of wind maximum at 900-700 hPa, not confined to single pressure level. The results show that the LLJs over southeast China dominate at 850 and 800 hPa. These LLJs are closely associated with the topography of this area and tend to locate regions with large terrain gradients, including the northeastern and eastern Yunnan-Guizhou Plateau. Under the influence of mid-latitude westerly winds, the LLJs above 750 hPa move northward to the Yangtze-Huai River Basin. Compared to the ten-year (2000-2009) mean climate conditions, the LLJs in the warm season of summer 2003 were exceptionally active and strong, as reflected by the positive anomalies of LLJ occurrence numbers and wind speed. In addition, the 2003 LLJs showed strong diurnal variation, especially at pressure levels below 800 hPa. The majority of the LLJs appeared between midnight and the early morning hours (before 8 a.m.). Finally, the summary of LLJ grid numbers indicates that more than 80% of LLJs in June and July 2003 occurred within the 33-d rainy period. Thus, these LLJs are directly related to the anomalously heavy rainfall in the Yangtze-Huai River Basin.

Change of Low-level Jet in a Heavy Rainstorm Process of Xiangtan in July 2016

Based on the previous research on the model of rainstorm weather with low-level jet in Xiangtan,using the classification result of radar echo characteristics,the wind profile data provided by new generation of weather radar in Changsha and hourly rainfall data,a thorough study of the heavy rainfall from 2 to 5 July 2016 in Xiangtan was conducted. It was concluded that heavy precipitation had the characteristics of the WPSH pattern of rainstorm with low-level jet at early stage,and then it converted to cold shear jet pattern in latter stage. When low-level southwest jet began to have momentum download,that is to say,there was more than 12 m/s of southwest jet below 1 km,and it rapidly strengthened and expanded downward,it was conducive to the occurrence of short-term rainstorm. The low-level jet would not immediately cause a strong precipitation when it reached the station,with a certain lag. A positive correlation existed between the increase of low-level jet index and precipitation intensity,and low-level jet index could predict the occurrence of heavy rainfall and rain intensity.

STATISTICAL ANALYSIS OF LOW-LEVEL JET STREAMS IN NANJING AREA BASED ON WIND PROFILER DATA

In order to understand the activity characteristics of low-level jets in the Nanjing area,statistical analysis and comparative study are carried out on their monthly and diurnal variations,characteristics of their cores and accompanying weather conditions using wind profile data in 2005-2008 collected by two wind profilers.The results show that low-level jets have significant monthly and diurnal variations.They occur more frequently in spring and summer than in autumn and winter and are more active in early morning and at night,with the maximum wind speed usually occurring at midnight.The central part of the low-level jet occurs mainly at the height of less than 1400 meters,and the enhancement of central speed is beneficial to the appearance of precipitation.Meanwhile,when the low-level jet appears in summer,it helps cause heavy rain.The statistical results of the boundary wind profiler are well consistent with those of the tropospheric wind profiler.Two kinds of wind profilers also have the capability of continuously detecting the development of low-level jets.

Impact of the Complex Terrain in Beijing on Formation of Low-Level Jets

This study investigated how the Taihang Mountains and the Yanshan Mountains affect low-level jets(LLJs)in the Beijing area,based on conventional radiosonde observations from Nanjiao Observatory(2016–2017)and high-resolution Weather Research and Forecasting–Advanced Research WRF(WRF-ARW)model simulations.Analysis of radiosonde observations indicated that LLJs in the study area are mainly from the southwest and northwest directions,with occurrence frequency of 44.6%and 33.0%,respectively.Southwest(northwest)LLJs are aligned parallel(perpendicular)to the orientation of the Taihang Mountain Range.Terrain sensitivity experiments using the WRF-ARW model were then conducted to examine the effects of terrain forcing on the northwest and southwest LLJs,with adopted terrain heights of 100%and 50%.The results showed that for northwest LLJs,reduction in the elevation of the Taihang Mountain Range led to weakening of jet intensity by approximately 20%and reduction in jet maximum height by approximately 250 m;lowering the Yanshan Mountain Range had minor influence on the northwest LLJs,with only a 5.2%reduction in intensity and no substantial change in jet maximum height.For southwest LLJs,reduction in the elevation of both the Taihang and Yanshan Mountain ranges resulted in minor changes in the intensity and height of the jets.Further analysis revealed that the topography in the Beijing area could modulate the height and intensity of the stable layer by altering the inversion structure within the boundary layer.The LLJs can develop rapidly within the stable layer,and both the location and the scale of the jet core exhibited reasonable agreement with the extent of the stable layer.

The Monsoon Low-Level Jet:Climatology and Impact on Monsoon Rainfall over the West Coast and Central Peninsular India

The monsoon low-level jet(MLLJ)originates at Mascarene high and after traveling thousands of kilometers enters India from the western boundary causing deep convection,cloudiness,and rainfall.Although its core lies at 850 hPa,it has a large vertical extent;therefore,different meteorological parameters at different levels have a large influence on the Indian summer monsoon rainfall.This study aims to examine the upper-air climatology of 9 stations on the west coast and central Peninsular India and to find out the effects of various parameters at different standard pressure levels on the Indian summer monsoon rainfall variability.We used the 34-yr(1971–2004)actual upper-air radiosonde/radio wind and standard synoptic surface observations data from these 9 stations and reported some new aspects of the MLLJ.The NCEP/NCAR and ECMWF reanalysis wind data have also been used to holistically study the features of MLLJ over sea and land areas.This study,as opposed to some recent studies,confirms the splitting of MLLJ into two branches,which can be seen on a few days during the monsoon season.Further analyses show that the change in geopotential height between 800 and 900 hPa has a strong bearing on the strength of MLLJ.The change in the upper-air pressure gradient force over the Indian landmass can cause a change in the wind speed of MLLJ during the monsoon season.

Assessment of compressive strength of jet grouting by machine learning

Jet grouting is one of the most popular soil improvement techniques,but its design usually involves great uncertainties that can lead to economic cost overruns in construction projects.The high dispersion in the properties of the improved material leads to designers assuming a conservative,arbitrary and unjustified strength,which is even sometimes subjected to the results of the test fields.The present paper presents an approach for prediction of the uniaxial compressive strength(UCS)of jet grouting columns based on the analysis of several machine learning algorithms on a database of 854 results mainly collected from different research papers.The selected machine learning model(extremely randomized trees)relates the soil type and various parameters of the technique to the value of the compressive strength.Despite the complex mechanism that surrounds the jet grouting process,evidenced by the high dispersion and low correlation of the variables studied,the trained model allows to optimally predict the values of compressive strength with a significant improvement with respect to the existing works.Consequently,this work proposes for the first time a reliable and easily applicable approach for estimation of the compressive strength of jet grouting columns.

Investigation of hydroxyl-terminated polybutadiene propellant breaking characteristics and mechanism impacted by submerged cavitation water jet

A submerged cavitation water jet(SCWJ)is an effective method to recycle solid propellant from obsolete solid engines by the breaking method.Solid propellant's breaking modes and mechanical process under SCWJ impact are unclear.This study aims to understand those impact breaking mechanisms.The hydroxyl-terminated polybutadiene(HTPB)propellant was chosen as the research material,and a self-designed test system was used to conduct impact tests at four different working pressures.The high-speed camera characterized crack propagation,and the DIC method calculated strain change during the impact process.Besides,micro and macro fracture morphologies were characterized by scanning electron microscope(SEM)and computed tomography(CT)scanning.The results reveal that the compressive strain concentration region locates right below the nozzle,and the shear strain region distributes symmetrically with the jet axis,which increases to 4% at first 16th ms,the compressive strain rises to 2% and 6% in the axial and transverse direction,respectively.The two tensile cracks formed first at the compression strain concentrate region,and there generate many shear cracks around the tensile cracks,and those shear cracks that develop and aggregate cause the cracks to become wider and cut through the tensile cracks,forming the tensile-shear cracks and the impact parts eventually fail.The HTPB propellant forms a breaking hole shaped conical after impact 10 s.The mass loss increases by 17 times at maximum,with the working pressure increasing by three times.Meanwhile,the damage value of the breaking hole remaining on the surface increases by 7.8 times while 2.9 times in the depth of the breaking hole.The breaking efficiency is closely affected by working pressures.The failure modes of HTPB impacted by SCWJ are classified as tensile crack-dominated and tensile-shear crack-dominated damage mechanisms.

Experimental and Three-Dimensional Numerical Simulation of Phenomena Induced by Submerged Oblique Jet Scouring

Scouring experiments were conducted using a three-dimensional laser scanning technology for angles of the jet spanning the interval from 0°to 30°,and the characteristics of the scour hole in equilibrium conditions were investigated accordingly.The results indicate that the optimal scouring effects occur when the jet angle is in the ranges between 15°and 20°.Moreover,the dimensionless profiles of the scour hole exhibit a high degree of similarity at different jet angles.Numerical simulations conducted using the Flow-3D software to investigate the bed shear stress along the jet impingement surface have shown that this stress is influenced by both the resultant force and the jet impingement surface area.It reaches its maximum value when the jet is vertical,decreases rapidly as the jet starts to tilt,then increases slightly,and decreases again significantly when the angle exceeds 20°.

A novel approach of jet polishing for interior surface of small-grooved components using three developed setups

It is a challenge to polish the interior surface of an additively manufactured component with complex structures and groove sizes less than 1 mm.Traditional polishing methods are disabled to polish the component,meanwhile keeping the structure intact.To overcome this challenge,small-grooved components made of aluminum alloy with sizes less than 1 mm were fabricated by a custom-made printer.A novel approach to multi-phase jet(MPJ)polishing is proposed,utilizing a self-developed polisher that incorporates solid,liquid,and gas phases.In contrast,abrasive air jet(AAJ)polishing is recommended,employing a customized polisher that combines solid and gas phases.After jet polishing,surface roughness(Sa)on the interior surface of grooves decreases from pristine 8.596μm to 0.701μm and 0.336μm via AAJ polishing and MPJ polishing,respectively,and Sa reduces 92%and 96%,correspondingly.Furthermore,a formula defining the relationship between linear energy density and unit defect volume has been developed.The optimized parameters in additive manufacturing are that linear energy density varies from 0.135 J mm^(-1)to 0.22 J mm^(-1).The unit area defect volume achieved via the optimized parameters decreases to 1/12 of that achieved via non-optimized ones.Computational fluid dynamics simulation results reveal that material is removed by shear stress,and the alumina abrasives experience multiple collisions with the defects on the heat pipe groove,resulting in uniform material removal.This is in good agreement with the experimental results.The novel proposed setups,approach,and findings provide new insights into manufacturing complex-structured components,polishing the small-grooved structure,and keeping it unbroken.

Fast synthesis of gold nanoparticles by cold atmospheric pressure plasma jet in the presence of Au^(+) ions and a capping agent

Homogeneous gold nanoparticles were synthesized under atmospheric pressure using a nonthermal helium plasma jet in a single-step process.A current power supply was used to generate the plasma discharge rich in diverse reactive species.These species induce rapid chemical reactions responsible for the reduction of the gold salts upon contact with the liquid solution.In this study,spherical and monodispersed gold nanoparticles were obtained within 5 min of plasma exposure using a solution containing gold(Ⅲ)chloride hydrate(HAuCl_(4))as a precursor and polyvinylpyrrolidone(PVP)as a capping agent to inhibit agglomerations.The formation of these metal nanoparticles was initially perceptible through a visible change in the sample's color,transitioning from light yellow to a red/pink color.This was subsequently corroborated by UVvis spectroscopy,which revealed an optical absorption in the 520-550 nm range for Au NPs,corresponding to the surface plasmon resonance(SPR)band.An investigation into the impact of various parameters,including plasma discharge duration,precursor and capping agent concentrations,was carried out to optimize conditions for the formation of well-separated,spherical gold nanoparticles.Dynamic light scattering(DLS)was used to measure the size of these nanoparticles,transmission electron microscopy(TEM)was used to observe their morphology and X-ray diffraction(XRD)was also employed to determine their crystallographic structure.The results confirm that homogeneous spherical gold nanoparticles with an average diameter of 13 nm can be easily synthesized through a rapid,straightforward,and environmentally friendly approach utilizing a helium atmospheric pressure plasma.

The interaction between a shaped charge jet and a single moving plate

Reactive armour is a very efficient add-on armour against shaped charge threats.Explosive reactive armour consists of one or several plates that are accelerated by an explosive.Similar but less violent acceleration of plates can also be achieved in a completely inert reactive armour.To be efficient against elongated jets,the motion of the plates needs to be inclined against the jet such that a sliding contact between the jet and the plates is established.This sliding contact causes a deflection and thinning of the jet.Under certain circumstances,the contact will become unstable,leading to severe disturbances on the jet.These disturbances will drastically reduce the jet penetration performance and it is therefore of interest to study the conditions that leads to an unstable contact.Previous studies on the interaction between shaped charge jets and flyer plates have shown that it is mainly the forward moving plate in an explosive reactive armour that is effective in disturbing the jet.This is usually attributed to the higher plate-to-jet mass flux ratio involved in the collision of the forward moving plate compared to the backward moving plate.For slow moving plates,as occurs in inert reactive armour,the difference in mass flux for the forward and backward moving plate is much lesser,and it is therefore of interest to study if other factors than the mass flux influences on the protection capability.In this work,experiments have been performed where a plate is accelerated along its length,interacting with a shaped charge jet that is fired at an oblique angle to the plate’s normal,either against or along the plate’s velocity.The arrangement corresponds to a jet interacting with a flyer plate from a reactive armour,with the exception that the collision velocity is the same for both types of obliquities in these experiments.The experiments show that disturbances on the jet are different in the two cases even though the collision velocities are the same.Numerical simulations of the interaction support the observation.The difference is attributed to the character of the contact pressure in the interaction region.For a backward moving plate,the maximum contact pressure is obtained at the beginning of the interaction zone and the contact pressure is therefore higher upstream than downstream of the jet while the opposite is true for a forward moving plate.A negative interface pressure gradient with respect to the jet motion results in a more stable flow than a positive,which means that the jet-plate contact is more stable for a backward moving plate than for a forward moving plate.A forward moving plate is thus more effective in disturbing the jet than a backward moving plate,not only because of the higher jet to plate mass flux ratio but also because of the character of the contact with the jet.

CONVEXITY OF THE FREE BOUNDARY FOR AN AXISYMMETRIC INCOMPRESSIBLE IMPINGING JET

This paper is devoted to the study of the shape of the free boundary for a threedimensional axisymmetric incompressible impinging jet.To be more precise,we will show that the free boundary is convex to the fluid,provided that the uneven ground is concave to the fluid.

A large-scale cold plasma jet: generation mechanism and application effect

Atmospheric pressure cold plasma jets(APCPJs) typically exhibit a slender, conical structure,which imposes limitations on their application for surface modification due to the restricted treatment area. In this paper, we introduce a novel plasma jet morphology known as the large-scale cold plasma jet(LSCPJ), characterized by the presence of both a central conical plasma jet and a peripheral trumpet-like diffuse plasma jet. The experimental investigations have identified the factors influencing the conical and the trumpet-like diffuse plasma jet, and theoretical simulations have shed light on the role of the flow field and the electric field in shaping the formation of the LSCPJ. It is proved that, under conditions of elevated helium concentration, the distributions of impurity gas particles and the electric field jointly determine the plasma jet’s morphology. High-speed ICCD camera images confirm the dynamic behavior of plasma bullets in LSCPJ, which is consistent with the theoretical analysis. Finally, it is demonstrated that when applied to the surface treatment of silicone rubber, LSCPJ can achieve a treatment area over 28 times larger than that of APCPJ under equivalent conditions. This paper uncovers the crucial role of impurity gases and electric fields in shaping plasma jet morphology and opens up the possibility of efficiently diversifying plasma jet generation effects through external electromagnetic fields. These insights hold the promise of reducing the generation cost of plasma jets and expanding their applications across various industrial sectors.