The utilization of an appropriate collector or surfactant is crucial for the beneficiation of low-rank coal.However,in previous studies,the selection of surfactants was primarily based on flotation procedures,which hi...The utilization of an appropriate collector or surfactant is crucial for the beneficiation of low-rank coal.However,in previous studies,the selection of surfactants was primarily based on flotation procedures,which hinders the understanding of the interaction mechanism between surfactant groups and oxygen-containing functional groups at the surface of low-rank coal.In this study,we investigate the flotation of low-rank coal in the presence of a composite collector by using a combined theoretical and experimental approach.The maximum flotation mass recovery achieved was 82.89%using a 3:1 mixture of dodecane and castor oil acid.Fourier-transform infrared and X-ray photoelectron spectroscopic analyses showed that castor oil acid was effectively adsorbed onto the surface of low-rank coal,enhancing the hydrophobicity of the coal.In addition,the diffusion coefficient of water molecules in the water-composite collector-coal system was greater than that in the dodecane system.Moreover,due to the presence of castor oil acid in the flotation process,the adsorption distance of dodecane and low-rank coal became shorter.Molecular dynamics simulations revealed that the diffusion and interaction of surfactant molecules at the interface of low-rank coal particles and water was enhanced because the adsorption of the dodecane-castor oil acid mixture is primarily controlled by hydrogen bonds and electrostatic attraction.Based on these results,a better surfactant for flotation of low-rank coal is also proposed.展开更多
Various published data show the amount of crop residue available annually in India may range from a low of 90 to a high of 180 million tonnes. Different types of crop residue are collected from farmers depending on th...Various published data show the amount of crop residue available annually in India may range from a low of 90 to a high of 180 million tonnes. Different types of crop residue are collected from farmers depending on the geography and crop pattern for instance, in north India rice straw and cotton stalks are collected while in central India soya husk and sugarcane tops are collected. Baling and transporting straw from the field, though appear to be an option for safe disposal, will be feasible only when alternate, effective and economically viable usage methods are identified and facilities and infrastructure for ex-situ management methods are created. One immediate short term use of the residue is to replace 5% - 7% of the 670 million tonnes of coal India currently consumes to generate power. The farmers will benefit from the sale of their excess crop residue. The scheme will reduce pollution due to residue burning practices. Replacing coal will cut the GHG emissions. The challenge is to mobilize the crop residue collection and timely delivery to power plants. The data and calculations in this monogram show that it is economical for the farmer to remove the crop residue from the field quickly by using modern balers, to pelletize the biomass in small-scale distributed pellet plants, to store pellets in the modern steel bins and finally to deliver the pellets to coal plants by using rail transport. The delivered cost is estimated at around Rp 6.78/kg. The Government of India encourages the power plants to pay at least Rp 10/kg for the delivered biomass in the form of pellets. The current monogram analyzes the organization of an efficient supply chain in the State of Haryana India to ensure a sustainable modern enterprise.展开更多
To promote gas extraction in low-rank high-gas coal beds, the pore structure characteristics of the coal and their effect on gas desorption were studied. The results show that micropores are relatively rare in low-ran...To promote gas extraction in low-rank high-gas coal beds, the pore structure characteristics of the coal and their effect on gas desorption were studied. The results show that micropores are relatively rare in low-rank coal; mesopores are usually semi-open and inkpot-shaped whereas macropores are usually slit-shaped. Gas desorption is relatively easy at high- pressure stages, whereas it is difficult at low-pressure stages because of the 'bottleneck effect' of the semi-open inkpot-shaped mesopores. A 'two-three-two' gas extraction model was established following experimental analysis and engineering practice applied in the Binchang mining area. In this model, gas extraction is divided into three periods: a planning period, a transitional period and a production period. In each period, surface extraction and underground extraction are performed simultaneously, and pressure-relief extraction and conventional extraction are coupled to each other. After applying this model, the gas extraction rate rose to 78.8 %.展开更多
Coal petrology provides significant inputs for the industrial utilisation of coal and for broad understanding the coal formation and diagenesis. The present paper entails the results of the investigations carded out o...Coal petrology provides significant inputs for the industrial utilisation of coal and for broad understanding the coal formation and diagenesis. The present paper entails the results of the investigations carded out on the selected coal samples, from Ib valley and Umaria coalfield, using scanning electron microscope (SEM) and X-ray diffraction (XRD) to study the surface microstructures and minerals present in them and the relationship of the finely dispersed mineral matter with the organic constituents. This would further help in evaluating the distribution and chemical character of the mineral matter occurring within the maceral types. Ib valley and Umaria coals are typical Indian (Lower Gondwana) non-coking coals and only scanty data is available on SEM study of these coals. Under SEM examination, it manifests that, the mineral matters of these coal occur as deep intergrowth, massive impregnation, superficial mounting, filling and depletion of micropores, mechanical cavity filling and fusinitic cavity filling.展开更多
The high-value utilization of low-rank coal would allow for expanding energy sources,improving energy efficiencies,and alleviating environmental issues.In order to use low-rank coal effectively,the hypercoals(HPCs)wer...The high-value utilization of low-rank coal would allow for expanding energy sources,improving energy efficiencies,and alleviating environmental issues.In order to use low-rank coal effectively,the hypercoals(HPCs)were co-extracted from two types of low-rank coal and biomass via N-methyl-2-purrolidinone(NMP)under mild conditions.The structures of the HPCs and residues were characterized by proximate and ultimate analysis,Raman spectra,and Fourier transform infrared(FT-IR)spectra.The carbon structure changes within the raw coals and HPCs were discussed.The individual thermal dissolution of Xibu(XB)coal,Guandi(GD)coal,and the biomass demonstrated that the biomass provided the lowest thermal dissolution yield Y1 and the highest thermal soluble yield Y2 at 280℃,and the ash content of three HPCs decreased as the extraction temperature rose.Co-thermal extractions in NMP at various coal/biomass mass ratios were performed,demonstrating a positive synergic effect for Y2 in the whole coal/biomass mass ratios.The maximum value of Y2 was 52.25wt% for XB coal obtained with a XB coal/biomass of 50wt% biomass.The maximum value of Y2 was 50.77wt% for GD coal obtained with a GD coal/biomass of 1:4.The difference for the optimal coal/biomass mass ratios between XB and GD coals could be attributed to the different co-extraction mechanisms for this two type coals.展开更多
Northeast India has a good deposit of sub-bituminous tertiary coal. The northeast Indian coals have unusual physico-chemical characteristics such as high sulfur, volatile matter and vitrinite content, and low ash cont...Northeast India has a good deposit of sub-bituminous tertiary coal. The northeast Indian coals have unusual physico-chemical characteristics such as high sulfur, volatile matter and vitrinite content, and low ash content. In addition, many environmental sensitive organic and mineral bound elements such as Fe, Mg, Bi, AI, V, Cu, Cd, Ni, Pb, and Mn etc. remain enriched in these coals. Such characteristics are associated with more severe environmental impacts due to mining and its utilization in coal based industries. Environmental challenges include large scale landscape damage, soil erosion, loss of forest ecosystem and wildlife habitat, air, water and soil pollution. Several physical and chemical methods are reported in literature for the removal of mineral matter, total sulfur and different forms of sulfur from high sulfur coal in northeast India. This paper may help different researchers and stakeholders to understand current state of research in the field. Initiatives may be taken towards sustainable use of coal resources by adopting innovative clean technologies and by implementing effective control measures and regulatory policies.展开更多
To reasonably utilize the coal direct liquefaction residue(DLR), contrasting research on the co-pyrolysis between different low-rank coals and DLR was investigated using a TGA coupled with an FT-IR spectrophotometer a...To reasonably utilize the coal direct liquefaction residue(DLR), contrasting research on the co-pyrolysis between different low-rank coals and DLR was investigated using a TGA coupled with an FT-IR spectrophotometer and a fixed-bed reactor. GC–MS, FTIR, and XRD were used to explore the reaction mechanisms of the various co-pyrolysis processes. Based on the TGA results, it was confirmed that the tetrahydrofuran insoluble fraction of DLR helped to catalyze the conversion reaction of lignite. Also, the addition of DLR improved the yield of tar in the fixed-bed, with altering the composition of the tar. Moreover, a kinetic analysis during the co-pyrolysis was conducted using a distributed activation energy model. The co-pyrolysis reactions showed an approximate double-Gaussian distribution.展开更多
The effect of sodium lignosulfonate(SL)as additive on the preparation of low-rank coal-water slurry(LCWS)was studied by experiments and molecular dynamics(MD)simulation s.The experimental results show that the appropr...The effect of sodium lignosulfonate(SL)as additive on the preparation of low-rank coal-water slurry(LCWS)was studied by experiments and molecular dynamics(MD)simulation s.The experimental results show that the appropriate amount of additives is beneficial to reduce the viscosity of LCWS and increase the slurry concentration.Adsorption isotherm studies showed that SL conforms to single-layer adsorption on the coal surface,andΔG_(ads)^(0) was negative,proving that the reaction was spontaneous.Zeta potential measurements showed that SL increased the negative charge on coal.FTIR scanning and XPS wide-range scanning were performed on the coal before and after adsorption,and it was found that the content of oxygen functional groups on coal increased after adsorption.Simulation results show that when a large number of SL molecules exist in the solution,some SL molecules will bind to hydrophobic hydrocarbon groups on coal.The rest of the SL molecule s,their hydrophobic alkyl tails,come into contact with each other and aggregate in solution.The agglomeration of SL molecules and the surface of coal with static electricity will also produce electrostatic interaction,which is conducive to the even dispersion of coal particles.The results of mean square displacement(MSD)and self-diffusion coefficient(D)show that the addition of SL reduces the diffusion rate of water molecules.Simulation results correspond to experimental results,indicating that MD simulation is accurate and feasible.展开更多
Pore structure characteristics are significant factor in the evaluation of the physical characteristics of low-rank coal.In this study,three low-rank coal samples were collected from the Xishanyao Formation,Santanghu ...Pore structure characteristics are significant factor in the evaluation of the physical characteristics of low-rank coal.In this study,three low-rank coal samples were collected from the Xishanyao Formation,Santanghu Basin,and low-temperature liquid-nitrogen adsorption(LP-N2A)measurements were taken under various pretreatment temperatures.Owing to the continuous loss of water and volatile matter in low-rank coal,the total pore volume assumes a three-step profile with knee temperatures of 150°C and 240°C.However,the ash in the coal can protect the coal skeleton.Pore collapse mainly occurs for mesopores with aperture smaller than 20 nm.Mesopores with apertures smaller than 5 nm exhibit a continuous decrease in pore volume,whereas the pore volume of mesopores with apertures ranging from 5 to 10 nm increases at lower pretreatment temperatures(<150°C)followed by a faint decrease.As for mesopores with apertures larger than 10 nm,the pore volume increases significantly when the pretreatment temperature reaches 300°C.The pore structure of low-rank coal features a significant heating effect,the pretreatment temperature should not exceed 150°C when the LP-N2A is used to evaluate the pore structure of low-rank coal to effectively evaluate the reservoir characteristics of low-rank coal.展开更多
In this study,low-rank coal-water slurry(LCWS)was prepared using polyoxyethylene dodecylphenol ether(PDPE)and polyoxyethylene lauryl ether(PLE),respectively.A combination of experiments and simulations was used to inv...In this study,low-rank coal-water slurry(LCWS)was prepared using polyoxyethylene dodecylphenol ether(PDPE)and polyoxyethylene lauryl ether(PLE),respectively.A combination of experiments and simulations was used to investigate the pulping properties and microscopic mechanism of the LCWS samples prepared using the two agents,so as to explore the influence of benzene ring on the performance of dispersant.The results of the LCWS preparation experiments revealed that the pulp-forming performance of PDPE exceeded that of PLE.When LCWS concentration is 62%,64%,and 66%,the apparent viscosity corresponding to PDPE is 247.80,504.17,and 653.10 mPa·s,and the apparent viscosity corresponding to PLE is 548.10,1470.61,and 1549.98 mPa·s,respectively.The C_(1000)(When the apparent viscosity is 1000 mPa·s,the corresponding concentration of LCWS is defined as C_(1000))values of PDPE and PLE are 67.60%and 62.95%,respectively.In addition to the van der Waals forces and hydrogen bonds between the PDPE and/or PLE molecules and coal,the benzene rings of PDPE presentπ-πstacking effect with the aromatic rings of coal.That could facilitate and strengthen the adsorption of PDPE on coal,which would be conducive to further improving the dispersion of coal particles.The two dispersants have no significant difference in effect on the pyrolysis of LCWS.The simulation results indicated that the times for PDPE and PLE molecules to reach flat adsorption state on coal are approximately 290 and 565 ps,respectively.The self-diffusion coefficient(D)of the PDPE and PLE on coal is 3.16 x 10^(-6)and6.57×10^(-6)m~2/s,respectively,and their interaction energies with coal are 785.71 and 648.60 kcal/mol,respectively.The results of the simulation calculations demonstrated that PDPE adsorbed on coal easier than PLE,and its binding is more stable than that of PLE owing to theπ-πstacking effect,which is conducive to uniform dispersion of coal in solution.The simulation results confirmed the experimental results.展开更多
The Qiwu Mine is located in the Ten Xian coal field of Shandong province.It experienced repeated volcanic activity,after the coal beds formed,where magma intrusion was significant The effect of coal reservoir porosity...The Qiwu Mine is located in the Ten Xian coal field of Shandong province.It experienced repeated volcanic activity,after the coal beds formed,where magma intrusion was significant The effect of coal reservoir porosity after magma intrusion was studied by analysis of regional and mine structure and magmatic activity.Experimental methods including maceral measurement under the microscope and mercury porosimetry were used for testing the pore structure.The authors believe that magma intrusion into low-rank bituminous coal causes reservoir porosity to gradually increase:the closer to the magmatic rock a sample is,the less the porosity.The pore size distribution also changes.In the natural coal bed the pore size is mainly in the transitive and middle pore range.However,the coal changes to anthracite next to the magmatic rock and larger pores dominate.Regional magma thermal evolution caused coal close to magmatic rock to be roasted,which reduced the volatile matter,developed larger holes,and destroyed plant tissue holes.The primary reason for a porosity decrease in the vicinity of magmatic rock is that Bituminite resulting from the roasting fills the holes that were present initially.展开更多
The abundance of low-rank coals in China, such as bituminous and brown coals, makes studies of their composition and structure of great significance to both coal chemistry research and for efficient utilization of the...The abundance of low-rank coals in China, such as bituminous and brown coals, makes studies of their composition and structure of great significance to both coal chemistry research and for efficient utilization of the coal. We describe how a Chinese brown coal was ultrasonically extracted with carbon disulfide (CS2) and the raw and extracted coals were characterized by Fourier Transform Infrared Spectroscopy (FTIR). The corresponding extract was analyzed with a coupled gas chromatograph mass spectrometer (GC/MS). The FTIR analysis shows a great abundance of amidocyanogen, carbonyl, aromatic and hetero aromatic rings and single carbon-beteroatom bonds. This suggests the possible occurrence of compounds like alcohols, phenols, amines, esters, carboxylic acids, ethers, aromatics or heteroaromatics. The GC/MS analysis of the CS2 extract detected 62 compounds, among which the non-polar ones were of lower abundance while the polar ones were in higher abundance and were structurally diverse. This demonstrates the compositional and structural complexity of Shengli coal.展开更多
In this paper, the desulphurisation of high sulphur low-rank coal is proposed as a raw material for pulverised coal injection technology. Therefore, the influence of oxidant linear velocity and the size of the coal gr...In this paper, the desulphurisation of high sulphur low-rank coal is proposed as a raw material for pulverised coal injection technology. Therefore, the influence of oxidant linear velocity and the size of the coal grain was investigated in a fluidised bed. The hydrodynamic parameters of the fluidised bed including: porosity, Sherwood criterion (diffusion Nusselt number), and mass transfer coefficient (external surface) were calculated. Furthermore, the study examined the effects of intensity and efficiency on the desulphurised coal properties; organic matter, ash, and volatile matter contents. The key changes during the conversion of pyritic sulphur and coal organic matter were subsequently examined. The results showed that the sulphur content (St^d 3.16 wt%) of the low-rank coal, was transformed to (St^d 〈 1.5 wt%) after desulfurization. Other enhanced properties were: V^daf ≤ 38.0 wt%; A^d 〈 10.0 wt%, now suitable for pulverised coal injection technology.展开更多
Low-rank coal contains more inherent moisture, high alkali metals (Na, K, Ca), high oxygen content, and low sulfur than high-rank coal. Low-rank coal gasification usually has lower efficiency than high-rank coal, sinc...Low-rank coal contains more inherent moisture, high alkali metals (Na, K, Ca), high oxygen content, and low sulfur than high-rank coal. Low-rank coal gasification usually has lower efficiency than high-rank coal, since more energy has been used to drive out the moisture and volatile matters and vaporize them. Nevertheless, Low-rank coal comprises about half of both the current utilization and the reserves in the United States and is the largest energy resource in the United States, so it is worthwhile and important to investigate the low-rank coal gasification process. In this study, the two-stage fuel feeding scheme is investigated in a downdraft, entrained-flow, and refractory-lined reactor. Both a high-rank coal (Illinois No.6 bituminous) and a low-rank coal (South Hallsville Texas Lignite) are used for comparison under the following operating conditions: 1) low-rank coal vs. high-rank coal, 2) one-stage injection vs. two-stage injection, 3) low-rank coal with pre-drying vs. without pre-drying, and 4) dry coal feeding without steam injection vs. with steam injection at the second stage. The results show that 1) With predrying to 12% moisture, syngas produced from lignite has 538 K lower exit temperature and 18% greater Higher Heating Value (HHV) than syngas produced from Illinois #6. 2) The two-stage fuel feeding scheme results in a lower wall temperature (around 100 K) in the lower half of the gasifier than the single-stage injection scheme. 3) Without pre-drying, the high inherent moisture content in the lignite causes the syngas HHV to decrease by 27% and the mole fractions of both H2 and CO to decrease by 33%, while the water vapor content increases by 121% (by volume). The low-rank coal, without pre-drying, will take longer to finish the demoisturization and devolatilization processes, resulting in delayed combustion and gasification processes.展开更多
Carbon capture,utilization,and storage(CCUS)is considered one of the most effective measures to achieve net-zero carbon emissions by 2050,and low-rank coal reservoirs are commonly recognized as potential CO_(2)storage...Carbon capture,utilization,and storage(CCUS)is considered one of the most effective measures to achieve net-zero carbon emissions by 2050,and low-rank coal reservoirs are commonly recognized as potential CO_(2)storage sites for carbon sequestration.To evaluate the geological CO_(2)sequestration potential of the low-rank coal reservoirs in the southern margin of the Junggar Basin,multiple experiments were performed on coal samples from that area,including high-pressure mercury porosimetry,low-temperature N2 adsorption,overburden porosity and permeability measurements,and high-pressure CH4 and CO_(2)isothermal adsorption measurements.Combined with the geological properties of the potential reservoir,including coal seam development and hydrodynamic characteristics,the areas between Santun River and Sigong River in the Junggar Basin were found to be suitable for CO_(2)sequestration.Consequently,the coal-bearing strata from Santun River to Sigong River can be defined as“potentially favorable areas for CO_(2)eequetfraiion”To better guide the future field test of CO_(2)storage in these areas,three CO_(2)sequestration modes were defined:1)the broad syncline and faulted anticline mode;2)the monoclinic mode;3)the syncline and strike-slip fault mode.展开更多
基金the Foundation of Guizhou Province(No.Qiankehe-ZK[2021]Yiban 255)the National Natural Science Foundation of China(No.52264032)the Foundation of Liupanshui Normal University(No.LPSSYLPY202122).
文摘The utilization of an appropriate collector or surfactant is crucial for the beneficiation of low-rank coal.However,in previous studies,the selection of surfactants was primarily based on flotation procedures,which hinders the understanding of the interaction mechanism between surfactant groups and oxygen-containing functional groups at the surface of low-rank coal.In this study,we investigate the flotation of low-rank coal in the presence of a composite collector by using a combined theoretical and experimental approach.The maximum flotation mass recovery achieved was 82.89%using a 3:1 mixture of dodecane and castor oil acid.Fourier-transform infrared and X-ray photoelectron spectroscopic analyses showed that castor oil acid was effectively adsorbed onto the surface of low-rank coal,enhancing the hydrophobicity of the coal.In addition,the diffusion coefficient of water molecules in the water-composite collector-coal system was greater than that in the dodecane system.Moreover,due to the presence of castor oil acid in the flotation process,the adsorption distance of dodecane and low-rank coal became shorter.Molecular dynamics simulations revealed that the diffusion and interaction of surfactant molecules at the interface of low-rank coal particles and water was enhanced because the adsorption of the dodecane-castor oil acid mixture is primarily controlled by hydrogen bonds and electrostatic attraction.Based on these results,a better surfactant for flotation of low-rank coal is also proposed.
文摘Various published data show the amount of crop residue available annually in India may range from a low of 90 to a high of 180 million tonnes. Different types of crop residue are collected from farmers depending on the geography and crop pattern for instance, in north India rice straw and cotton stalks are collected while in central India soya husk and sugarcane tops are collected. Baling and transporting straw from the field, though appear to be an option for safe disposal, will be feasible only when alternate, effective and economically viable usage methods are identified and facilities and infrastructure for ex-situ management methods are created. One immediate short term use of the residue is to replace 5% - 7% of the 670 million tonnes of coal India currently consumes to generate power. The farmers will benefit from the sale of their excess crop residue. The scheme will reduce pollution due to residue burning practices. Replacing coal will cut the GHG emissions. The challenge is to mobilize the crop residue collection and timely delivery to power plants. The data and calculations in this monogram show that it is economical for the farmer to remove the crop residue from the field quickly by using modern balers, to pelletize the biomass in small-scale distributed pellet plants, to store pellets in the modern steel bins and finally to deliver the pellets to coal plants by using rail transport. The delivered cost is estimated at around Rp 6.78/kg. The Government of India encourages the power plants to pay at least Rp 10/kg for the delivered biomass in the form of pellets. The current monogram analyzes the organization of an efficient supply chain in the State of Haryana India to ensure a sustainable modern enterprise.
基金Acknowledgments The research was supported by the National Basic Research Programme of China (973 Project) (2011CB201205), National Natural Science Foundation of China (51474211), and the National Key Technology R&D Program (2012BAK04B07).
文摘To promote gas extraction in low-rank high-gas coal beds, the pore structure characteristics of the coal and their effect on gas desorption were studied. The results show that micropores are relatively rare in low-rank coal; mesopores are usually semi-open and inkpot-shaped whereas macropores are usually slit-shaped. Gas desorption is relatively easy at high- pressure stages, whereas it is difficult at low-pressure stages because of the 'bottleneck effect' of the semi-open inkpot-shaped mesopores. A 'two-three-two' gas extraction model was established following experimental analysis and engineering practice applied in the Binchang mining area. In this model, gas extraction is divided into three periods: a planning period, a transitional period and a production period. In each period, surface extraction and underground extraction are performed simultaneously, and pressure-relief extraction and conventional extraction are coupled to each other. After applying this model, the gas extraction rate rose to 78.8 %.
文摘Coal petrology provides significant inputs for the industrial utilisation of coal and for broad understanding the coal formation and diagenesis. The present paper entails the results of the investigations carded out on the selected coal samples, from Ib valley and Umaria coalfield, using scanning electron microscope (SEM) and X-ray diffraction (XRD) to study the surface microstructures and minerals present in them and the relationship of the finely dispersed mineral matter with the organic constituents. This would further help in evaluating the distribution and chemical character of the mineral matter occurring within the maceral types. Ib valley and Umaria coals are typical Indian (Lower Gondwana) non-coking coals and only scanty data is available on SEM study of these coals. Under SEM examination, it manifests that, the mineral matters of these coal occur as deep intergrowth, massive impregnation, superficial mounting, filling and depletion of micropores, mechanical cavity filling and fusinitic cavity filling.
基金financially supported by the National Natural Science Foundation of China (No. 51574023)
文摘The high-value utilization of low-rank coal would allow for expanding energy sources,improving energy efficiencies,and alleviating environmental issues.In order to use low-rank coal effectively,the hypercoals(HPCs)were co-extracted from two types of low-rank coal and biomass via N-methyl-2-purrolidinone(NMP)under mild conditions.The structures of the HPCs and residues were characterized by proximate and ultimate analysis,Raman spectra,and Fourier transform infrared(FT-IR)spectra.The carbon structure changes within the raw coals and HPCs were discussed.The individual thermal dissolution of Xibu(XB)coal,Guandi(GD)coal,and the biomass demonstrated that the biomass provided the lowest thermal dissolution yield Y1 and the highest thermal soluble yield Y2 at 280℃,and the ash content of three HPCs decreased as the extraction temperature rose.Co-thermal extractions in NMP at various coal/biomass mass ratios were performed,demonstrating a positive synergic effect for Y2 in the whole coal/biomass mass ratios.The maximum value of Y2 was 52.25wt% for XB coal obtained with a XB coal/biomass of 50wt% biomass.The maximum value of Y2 was 50.77wt% for GD coal obtained with a GD coal/biomass of 1:4.The difference for the optimal coal/biomass mass ratios between XB and GD coals could be attributed to the different co-extraction mechanisms for this two type coals.
文摘Northeast India has a good deposit of sub-bituminous tertiary coal. The northeast Indian coals have unusual physico-chemical characteristics such as high sulfur, volatile matter and vitrinite content, and low ash content. In addition, many environmental sensitive organic and mineral bound elements such as Fe, Mg, Bi, AI, V, Cu, Cd, Ni, Pb, and Mn etc. remain enriched in these coals. Such characteristics are associated with more severe environmental impacts due to mining and its utilization in coal based industries. Environmental challenges include large scale landscape damage, soil erosion, loss of forest ecosystem and wildlife habitat, air, water and soil pollution. Several physical and chemical methods are reported in literature for the removal of mineral matter, total sulfur and different forms of sulfur from high sulfur coal in northeast India. This paper may help different researchers and stakeholders to understand current state of research in the field. Initiatives may be taken towards sustainable use of coal resources by adopting innovative clean technologies and by implementing effective control measures and regulatory policies.
基金Supported by National High-tech Research and Development Program of China(2011AA05A2021)the National Natural Science Foundation of China(21536009)Science and Technology Plan Projects of Shaanxi Province(2017ZDCXL-GY-10-03).
文摘To reasonably utilize the coal direct liquefaction residue(DLR), contrasting research on the co-pyrolysis between different low-rank coals and DLR was investigated using a TGA coupled with an FT-IR spectrophotometer and a fixed-bed reactor. GC–MS, FTIR, and XRD were used to explore the reaction mechanisms of the various co-pyrolysis processes. Based on the TGA results, it was confirmed that the tetrahydrofuran insoluble fraction of DLR helped to catalyze the conversion reaction of lignite. Also, the addition of DLR improved the yield of tar in the fixed-bed, with altering the composition of the tar. Moreover, a kinetic analysis during the co-pyrolysis was conducted using a distributed activation energy model. The co-pyrolysis reactions showed an approximate double-Gaussian distribution.
基金supported by SDUST Research Fund(Grant No.2018TDJH101)Key Research and Development Project of Shandong(Grant No.2019GGX103035)+2 种基金National Natural Science Foundation of China(Grant Nos.51904174,52074175)Young Science and Technology Innovation Program of Shandong Province(Grant No.2020KJD001)Project of Shandong Province Higher Educational Young Innovative Talent Introduction and Cultivation Team。
文摘The effect of sodium lignosulfonate(SL)as additive on the preparation of low-rank coal-water slurry(LCWS)was studied by experiments and molecular dynamics(MD)simulation s.The experimental results show that the appropriate amount of additives is beneficial to reduce the viscosity of LCWS and increase the slurry concentration.Adsorption isotherm studies showed that SL conforms to single-layer adsorption on the coal surface,andΔG_(ads)^(0) was negative,proving that the reaction was spontaneous.Zeta potential measurements showed that SL increased the negative charge on coal.FTIR scanning and XPS wide-range scanning were performed on the coal before and after adsorption,and it was found that the content of oxygen functional groups on coal increased after adsorption.Simulation results show that when a large number of SL molecules exist in the solution,some SL molecules will bind to hydrophobic hydrocarbon groups on coal.The rest of the SL molecule s,their hydrophobic alkyl tails,come into contact with each other and aggregate in solution.The agglomeration of SL molecules and the surface of coal with static electricity will also produce electrostatic interaction,which is conducive to the even dispersion of coal particles.The results of mean square displacement(MSD)and self-diffusion coefficient(D)show that the addition of SL reduces the diffusion rate of water molecules.Simulation results correspond to experimental results,indicating that MD simulation is accurate and feasible.
基金This work was supported by the Natural Science Basic Research Plan in Shaanxi Province of China(Program No.2019JQ-527)Shandong Key laboratory of Depositional Mineralization and Sedimentary Mineral Open Fund(Program No.DMSM20190014)Scientific Research Program Funded by Shaanxi Provincial Education Department(Program No.20JS116)。
文摘Pore structure characteristics are significant factor in the evaluation of the physical characteristics of low-rank coal.In this study,three low-rank coal samples were collected from the Xishanyao Formation,Santanghu Basin,and low-temperature liquid-nitrogen adsorption(LP-N2A)measurements were taken under various pretreatment temperatures.Owing to the continuous loss of water and volatile matter in low-rank coal,the total pore volume assumes a three-step profile with knee temperatures of 150°C and 240°C.However,the ash in the coal can protect the coal skeleton.Pore collapse mainly occurs for mesopores with aperture smaller than 20 nm.Mesopores with apertures smaller than 5 nm exhibit a continuous decrease in pore volume,whereas the pore volume of mesopores with apertures ranging from 5 to 10 nm increases at lower pretreatment temperatures(<150°C)followed by a faint decrease.As for mesopores with apertures larger than 10 nm,the pore volume increases significantly when the pretreatment temperature reaches 300°C.The pore structure of low-rank coal features a significant heating effect,the pretreatment temperature should not exceed 150°C when the LP-N2A is used to evaluate the pore structure of low-rank coal to effectively evaluate the reservoir characteristics of low-rank coal.
基金supported by National Natural Science Foundation of China(Nos.51904174 and 52074175)Postdoctoral Science Foundation of China(No.2019M662403)+3 种基金Young Science and Technology Innovation Program of Shandong Province(No.2020KJD001)Key Research and Development Project of Shandong(No.2019GGX103035)SDUST Research Fund(No.2018TDJH101)Project of Shandong Province Higher Educational Young Innovative Talent Introduction and Cultivation Team。
文摘In this study,low-rank coal-water slurry(LCWS)was prepared using polyoxyethylene dodecylphenol ether(PDPE)and polyoxyethylene lauryl ether(PLE),respectively.A combination of experiments and simulations was used to investigate the pulping properties and microscopic mechanism of the LCWS samples prepared using the two agents,so as to explore the influence of benzene ring on the performance of dispersant.The results of the LCWS preparation experiments revealed that the pulp-forming performance of PDPE exceeded that of PLE.When LCWS concentration is 62%,64%,and 66%,the apparent viscosity corresponding to PDPE is 247.80,504.17,and 653.10 mPa·s,and the apparent viscosity corresponding to PLE is 548.10,1470.61,and 1549.98 mPa·s,respectively.The C_(1000)(When the apparent viscosity is 1000 mPa·s,the corresponding concentration of LCWS is defined as C_(1000))values of PDPE and PLE are 67.60%and 62.95%,respectively.In addition to the van der Waals forces and hydrogen bonds between the PDPE and/or PLE molecules and coal,the benzene rings of PDPE presentπ-πstacking effect with the aromatic rings of coal.That could facilitate and strengthen the adsorption of PDPE on coal,which would be conducive to further improving the dispersion of coal particles.The two dispersants have no significant difference in effect on the pyrolysis of LCWS.The simulation results indicated that the times for PDPE and PLE molecules to reach flat adsorption state on coal are approximately 290 and 565 ps,respectively.The self-diffusion coefficient(D)of the PDPE and PLE on coal is 3.16 x 10^(-6)and6.57×10^(-6)m~2/s,respectively,and their interaction energies with coal are 785.71 and 648.60 kcal/mol,respectively.The results of the simulation calculations demonstrated that PDPE adsorbed on coal easier than PLE,and its binding is more stable than that of PLE owing to theπ-πstacking effect,which is conducive to uniform dispersion of coal in solution.The simulation results confirmed the experimental results.
基金the National Basic Research Program of China(No.2009CB219605)the Key Program of the National Natural Science Foundation of China(No.40730422)the National Major Project of Science and Technology(No.2008ZX05034-04)
文摘The Qiwu Mine is located in the Ten Xian coal field of Shandong province.It experienced repeated volcanic activity,after the coal beds formed,where magma intrusion was significant The effect of coal reservoir porosity after magma intrusion was studied by analysis of regional and mine structure and magmatic activity.Experimental methods including maceral measurement under the microscope and mercury porosimetry were used for testing the pore structure.The authors believe that magma intrusion into low-rank bituminous coal causes reservoir porosity to gradually increase:the closer to the magmatic rock a sample is,the less the porosity.The pore size distribution also changes.In the natural coal bed the pore size is mainly in the transitive and middle pore range.However,the coal changes to anthracite next to the magmatic rock and larger pores dominate.Regional magma thermal evolution caused coal close to magmatic rock to be roasted,which reduced the volatile matter,developed larger holes,and destroyed plant tissue holes.The primary reason for a porosity decrease in the vicinity of magmatic rock is that Bituminite resulting from the roasting fills the holes that were present initially.
基金supported by the Natural Science Foundation of Henan Province (No.2004150017)the Leading Academic Discipline Project of Chemical Engineering of Henan University of Urban Construction
文摘The abundance of low-rank coals in China, such as bituminous and brown coals, makes studies of their composition and structure of great significance to both coal chemistry research and for efficient utilization of the coal. We describe how a Chinese brown coal was ultrasonically extracted with carbon disulfide (CS2) and the raw and extracted coals were characterized by Fourier Transform Infrared Spectroscopy (FTIR). The corresponding extract was analyzed with a coupled gas chromatograph mass spectrometer (GC/MS). The FTIR analysis shows a great abundance of amidocyanogen, carbonyl, aromatic and hetero aromatic rings and single carbon-beteroatom bonds. This suggests the possible occurrence of compounds like alcohols, phenols, amines, esters, carboxylic acids, ethers, aromatics or heteroaromatics. The GC/MS analysis of the CS2 extract detected 62 compounds, among which the non-polar ones were of lower abundance while the polar ones were in higher abundance and were structurally diverse. This demonstrates the compositional and structural complexity of Shengli coal.
文摘In this paper, the desulphurisation of high sulphur low-rank coal is proposed as a raw material for pulverised coal injection technology. Therefore, the influence of oxidant linear velocity and the size of the coal grain was investigated in a fluidised bed. The hydrodynamic parameters of the fluidised bed including: porosity, Sherwood criterion (diffusion Nusselt number), and mass transfer coefficient (external surface) were calculated. Furthermore, the study examined the effects of intensity and efficiency on the desulphurised coal properties; organic matter, ash, and volatile matter contents. The key changes during the conversion of pyritic sulphur and coal organic matter were subsequently examined. The results showed that the sulphur content (St^d 3.16 wt%) of the low-rank coal, was transformed to (St^d 〈 1.5 wt%) after desulfurization. Other enhanced properties were: V^daf ≤ 38.0 wt%; A^d 〈 10.0 wt%, now suitable for pulverised coal injection technology.
文摘Low-rank coal contains more inherent moisture, high alkali metals (Na, K, Ca), high oxygen content, and low sulfur than high-rank coal. Low-rank coal gasification usually has lower efficiency than high-rank coal, since more energy has been used to drive out the moisture and volatile matters and vaporize them. Nevertheless, Low-rank coal comprises about half of both the current utilization and the reserves in the United States and is the largest energy resource in the United States, so it is worthwhile and important to investigate the low-rank coal gasification process. In this study, the two-stage fuel feeding scheme is investigated in a downdraft, entrained-flow, and refractory-lined reactor. Both a high-rank coal (Illinois No.6 bituminous) and a low-rank coal (South Hallsville Texas Lignite) are used for comparison under the following operating conditions: 1) low-rank coal vs. high-rank coal, 2) one-stage injection vs. two-stage injection, 3) low-rank coal with pre-drying vs. without pre-drying, and 4) dry coal feeding without steam injection vs. with steam injection at the second stage. The results show that 1) With predrying to 12% moisture, syngas produced from lignite has 538 K lower exit temperature and 18% greater Higher Heating Value (HHV) than syngas produced from Illinois #6. 2) The two-stage fuel feeding scheme results in a lower wall temperature (around 100 K) in the lower half of the gasifier than the single-stage injection scheme. 3) Without pre-drying, the high inherent moisture content in the lignite causes the syngas HHV to decrease by 27% and the mole fractions of both H2 and CO to decrease by 33%, while the water vapor content increases by 121% (by volume). The low-rank coal, without pre-drying, will take longer to finish the demoisturization and devolatilization processes, resulting in delayed combustion and gasification processes.
文摘Carbon capture,utilization,and storage(CCUS)is considered one of the most effective measures to achieve net-zero carbon emissions by 2050,and low-rank coal reservoirs are commonly recognized as potential CO_(2)storage sites for carbon sequestration.To evaluate the geological CO_(2)sequestration potential of the low-rank coal reservoirs in the southern margin of the Junggar Basin,multiple experiments were performed on coal samples from that area,including high-pressure mercury porosimetry,low-temperature N2 adsorption,overburden porosity and permeability measurements,and high-pressure CH4 and CO_(2)isothermal adsorption measurements.Combined with the geological properties of the potential reservoir,including coal seam development and hydrodynamic characteristics,the areas between Santun River and Sigong River in the Junggar Basin were found to be suitable for CO_(2)sequestration.Consequently,the coal-bearing strata from Santun River to Sigong River can be defined as“potentially favorable areas for CO_(2)eequetfraiion”To better guide the future field test of CO_(2)storage in these areas,three CO_(2)sequestration modes were defined:1)the broad syncline and faulted anticline mode;2)the monoclinic mode;3)the syncline and strike-slip fault mode.