Structural Engineering of Anode Materials for Low-Temperature Lithium-Ion Batteries:Mechanisms,Strategies,and Prospects

The severe degradation of electrochemical performance for lithium-ion batteries(LIBs)at low temperatures poses a significant challenge to their practical applications.Consequently,extensive efforts have been contributed to explore novel anode materials with high electronic conductivity and rapid Li^(+)diffusion kinetics for achieving favorable low-temperature performance of LIBs.Herein,we try to review the recent reports on the synthesis and characterizations of low-temperature anode materials.First,we summarize the underlying mechanisms responsible for the performance degradation of anode materials at subzero temperatures.Second,detailed discussions concerning the key pathways(boosting electronic conductivity,enhancing Li^(+)diffusion kinetics,and inhibiting lithium dendrite)for improving the low-temperature performance of anode materials are presented.Third,several commonly used low-temperature anode materials are briefly introduced.Fourth,recent progress in the engineering of these low-temperature anode materials is summarized in terms of structural design,morphology control,surface&interface modifications,and multiphase materials.Finally,the challenges that remain to be solved in the field of low-temperature anode materials are discussed.This review was organized to offer valuable insights and guidance for next-generation LIBs with excellent low-temperature electrochemical performance.

Low-temperature characteristicsof rubbers and performance testsof type 120 emergencyvalve diaphragms

Purpose–The type 120 emergency valve is an essential braking component of railway freight trains,butcorresponding diaphragms consisting of natural rubber(NR)and chloroprene rubber(CR)exhibit insufficientaging resistance and low-temperature resistance,respectively.In order to develop type 120 emergency valverubber diaphragms with long-life and high-performance,low-temperatureresistant CR and NR were processed.Design/methodology/approach–The physical properties of the low-temperature-resistant CR and NRwere tested by low-temperature stretching,dynamic mechanical analysis,differential scanning calorimetryand thermogravimetric analysis.Single-valve and single-vehicle tests of type 120 emergency valves werecarried out for emergency diaphragms consisting of NR and CR.Findings–The low-temperature-resistant CR and NR exhibited excellent physical properties.The elasticityand low-temperature resistance of NR were superior to those of CR,whereas the mechanical properties of thetwo rubbers were similar in the temperature range of 0℃–150℃.The NR and CR emergency diaphragms metthe requirements of the single-valve test.In the low-temperature single-vehicle test,only the low-temperaturesensitivity test of the NR emergency diaphragm met the requirements.Originality/value–The innovation of this study is that it provides valuable data and experience for futuredevelopment of type 120 valve rubber diaphragms.

Boosting oxygen reduction activity and CO_(2) resistance on bismuth ferrite-based perovskite cathode for low-temperature solid oxide fuel cells below 600℃

Developing efficient and stable cathodes for low-temperature solid oxide fuel cells(LT-SOFCs) is of great importance for the practical commercialization.Herein,we propose a series of Sm-modified Bi_(0.7-x)Sm_xSr_(0.3)FeO_(3-δ) perovskites as highly-active catalysts for LT-SOFCs.Sm doping can significantly enhance the electrocata lytic activity and chemical stability of cathode.At 600℃,Bi_(0.675)Sm_(0.025)Sr_(0.3)FeO_(3-δ)(BSSF25) cathode has been found to be the optimum composition with a polarization resistance of 0.098 Ω cm^2,which is only around 22.8% of Bi_(0.7)Sr_(0.3)FeO_(3-δ)(BSF).A full cell utilizing BSSF25 displays an exceptional output density of 790 mW cm^(-2),which can operate continuously over100 h without obvious degradation.The remarkable electrochemical performance observed can be attributed to the improved O_(2) transport kinetics,superior surface oxygen adsorption capacity,as well as O_(2)p band centers in close proximity to the Fermi level.Moreover,larger average bonding energy(ABE) and the presence of highly acidic Bi,Sm,and Fe ions restrict the adsorption of CO_(2) on the cathode surface,resulting in excellent CO_(2) resistivity.This work provides valuable guidance for systematic design of efficient and durable catalysts for LT-SOFCs.

Advances in sodium-ion batteries at low-temperature: Challenges and strategies

With the continuing boost in the demand for energy storage,there is an increasing requirement for batteries to be capable of operation in extreme environmental conditions.Sodium-ion batteries(SIBs) have emerged as a highly promising energy storage solution due to their promising performance over a wide range of temperatures and the abundance of sodium resources in the earth's crust.Compared to lithiumion batteries(LIBs),although sodium ions possess a larger ionic radius,they are more easily desolvated than lithium ions.Fu rthermore,SIBs have a smaller Stokes radius than lithium ions,resulting in improved sodium-ion mobility in the electrolyte.Nevertheless,SIBs demonstrate a significant decrease in performance at low temperatures(LT),which constrains their operation in harsh weather conditions.Despite the increasing interest in SIBs,there is a notable scarcity of research focusing specifically on their mechanism under LT conditions.This review explores recent research that considers the thermal tolerance of SIBs from an inner chemistry process perspective,spanning a wide temperature spectrum(-70 to100℃),particularly at LT conditions.In addition,the enhancement of electrochemical performance in LT SIBs is based on improvements in reaction kinetics and cycling stability achieved through the utilization of effective electrode materials and electrolyte components.Furthermore,the safety concerns associated with SIBs are addressed and effective strategies are proposed for mitigating these issues.Finally,prospects conducted to extend the environmental frontiers of commercial SIBs are discussed mainly from three viewpoints including innovations in materials,development and research of relevant theoretical mechanisms,and intelligent safety management system establishment for larger-scale energy storage SIBs.

Temperature inversion enables superior stability for low-temperature Zn-ion batteries

It is challenging for aqueous Zn-ion batteries(ZIBs)to achieve comparable low-temperature(low-T)performance due to the easy-frozen electrolyte and severe Zn dendrites.Herein,an aqueous electrolyte with a low freezing point and high ionic conductivity is proposed.Combined with molecular dynamics simulation and multi-scale interface analysis(time of flight secondary ion mass spectrometry threedimensional mapping and in-situ electrochemical impedance spectroscopy method),the temperature independence of the V_(2)O_(5)cathode and Zn anode is observed to be opposite.Surprisingly,dominated by the solvent structure of the designed electrolyte at low temperatures,vanadium dissolution/shuttle is significantly inhibited,and the zinc dendrites caused by this electrochemical crosstalk are greatly relieved,thus showing an abnormal temperature inversion effect.Through the disclosure and improvement of the above phenomena,the designed Zn||V_(2)O_(5)full cell delivers superior low-T performance,maintaining almost 99%capacity retention after 9500 cycles(working more than 2500 h)at-20°C.This work proposes a kind of electrolyte suitable for low-T ZIBs and reveals the inverse temperature dependence of the Zn anode,which might offer a novel perspective for the investigation of low-T aqueous battery systems.

Modulating the Electrolyte Inner Solvation Structure via Low Polarity Co-solvent for Low-Temperature Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries are regarded as the promising candidates for large-scale energy storage systems owing to low cost and high safety;however,their applications are restricted by their poor low-temperature performance.Herein,a low-temperature electrolyte for low-temperature aqueous zinc-ion batteries is designed by introducing low-polarity diglyme into an aqueous solution of Zn(ClO_(4))_(2).The diglyme disrupts the hydrogenbonding network of water and lowers the freezing point of the electrolyte to-105℃.The designed electrolyte achieves ionic conductivity up to16.18 mS cm^(-1)at-45℃.The diglyme and ClO_(4)^(-)reconfigure the solvated structure of Zn^(2+),which is more favorable for the desolvation of Zn^(2+)at low temperatures.In addition,the diglyme effectively suppresses the dendrites,hydrogen evolution reaction,and by-products of the zinc anode,improving the cycle stability of the battery.At-20℃,a Zn‖Zn symmetrical cell is cycled for 5200 h at 1 mA cm^(-2)and 1 mA h cm^(-2),and a Zn‖polyaniline battery achieves an ultra-long cycle life of 10000 times.This study sheds light on the future design of electrolytes with high ionic conductivity and easy desolvation at low temperatures for rechargeable batteries.

Impact of Low-temperature Storage on Volatile Flavor Compounds in Prepared Pork Products

[Objectives]This study was conducted to explore the dynamic changes of volatile flavor compounds in prepared pork during storage at different low-temperature conditions.[Methods]Prepared pork was stored at 4,-4 and-18℃.The volatile flavor compounds of prepared pork were determined by solid-phase microextraction-gas chromatography-mass spectrometry(SPME-GC-MS)at days 0,7,14,21 and 28,and relative odor activity value(OAV),principal component analysis(PCA)and cluster analysis(CA)were combined to analyze changes in volatile flavor compounds of prepared pork during storage.[Results]The total number of volatile flavor compounds gradually decreased with the prolongation of the storage period,and OAV analysis identified 22 key flavor compounds(OAV≥1).The results of PCA and CA showed that 2-methyl-1-butanol,1-octen-3-ol,linalool,cineole,hexanal and nonanal were the main key flavor components,and the degree of flavor degradation was low under both superchilling and freezing conditions.After 28 days of storage,the alcohol content in the chilling group was significantly higher than other two groups,and the overall content of volatile flavor compounds was also significantly higher than other two groups,indicating that the-4℃chilling storage was more favorable for maintaining the overall flavor of prepared pork.[Conclusions]This study provides a theoretical basis for finding a better storage method for prepared meat products.

Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO_(2)

CsPbX_(3)-based(X=I,Br,Cl)inorganic perovskite solar cells(PSCs)prepared by low-temperature process have attracted much attention because of their low cost and excellent thermal stability.However,the high trap state density and serious charge recombination between low-temperature processed TiO_(2)film and inorganic perovskite layer interface seriously restrict the performance of all-inorganic PSCs.Here a thin polyethylene oxide(PEO)layer is employed to modify TiO_(2)film to passivate traps and promote carrier collection.The impacts of PEO layer on microstructure and photoelectric characteristics of TiO_(2)film and related devices are systematically studied.Characterization results suggest that PEO modification can reduce the surface roughness of TiO_(2)film,decrease its average surface potential,and passivate trap states.At optimal conditions,the champion efficiency of CsPbI_(2)Br PSCs with PEO-modified TiO_(2)(PEO-PSCs)has been improved to 11.24%from 9.03%of reference PSCs.Moreover,the hysteresis behavior and charge recombination have been suppressed in PEO-PSCs.

Ca and Sr co-doping induced oxygen vacancies in 3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts for boosting low-temperature oxidative coupling of methane

It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower temperature.Herein,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(A_(2)B_(2)O_(7)-type)catalysts with disordered defective cubic fluorite phased structure were successfully prepared by a colloidal crystal template method.3DOM structure promotes the accessibility of the gaseous reactants(O2and CH4)to the active sites.The co-doping of Ca and Sr ions in La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts improved the formation of oxygen vacancies,thereby leading to increased density of surface-active oxygen species(O_(2)^(-))for the activation of CH4and the formation of C2products(C2H6and C2H4).3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts exhibit high catalytic activity for OCM at low temperature.3DOM La1.7Sr0.3Ce1.7Ca0.3O7-δcatalyst with the highest density of O_(2)^(-)species exhibited the highest catalytic activity for low-temperature OCM,i.e.,its CH4conversion,selectivity and yield of C2products at 650℃are 32.2%,66.1%and 21.3%,respectively.The mechanism was proposed that the increase in surface oxygen vacancies induced by the co-doping of Ca and Sr ions boosts the key step of C-H bond breaking and C-C bond coupling in catalyzing low-temperature OCM.It is meaningful for the development of the low-temperature and high-efficient catalysts for OCM reaction in practical application.

Risk Regionalization of Low-temperature Disasters for Flue-cured Tobacco Planting in Qujing Area Based on GIS

There is a prominent,complex and diverse three-dimensional climate and a variety of meteorological disasters in Qujing area. The risk zoning of low-temperature disasters for flue-cured tobacco planting in Qujing area was studied to provide reference for drawing on advantages and avoiding disadvantages in flue-cured tobacco planting,disaster reduction,and disaster relief services. According to the production practice of fluecured tobacco and local climate analysis,it was determined that flue-cured tobacco in Qujing area was very vulnerable to low temperature during the seedling stage（ from early February to middle April） and in the mature period（ from early July to early September）. Based on the quantitative analysis and evaluation of risk of disaster-causing factors,sensitivity of disaster-breeding environment,vulnerability of carriers,and disaster prevention and reduction capability,a risk assessment model of meteorological disasters was established to precisely evaluate and zone the risk of low-temperature disasters for flue-cured tobacco planting in allusion to the seedling and mature stage in Qujing area by using GIS technology. The risk of lowtemperature disasters for flue-cured tobacco planting during the two periods was divided into four grades,namely low,medium,high and very high risk.

Preparation of α-Bi_2O_3 from bismuth powders through low-temperature oxidation

α-Bi2O3 powders were prepared from nanometer Bi powders through low-temperature oxidation at less than 873.15 K. XRD, SEM, TEM and HRTEM were used to characterize the structure and morphology of Bi powders and Bi2O3 particles. Kinetic studies on the bismuth oxidation at low-temperatures were carried out by TGA method. The results show that bismuth beads should be reunited and oxidized to become irregular Bi2O3 powders. The bismuth oxidation follows shrinking core model, and its controlling mechanism varies at different reaction time. Within 0-10 min, the kinetics is controlled by chemical reaction, after that it is controlled by O2 diffusion in the solid α-Bi2O3 layer. The apparent activation energy is determined as 55.19 kJ/mol in liquid-phase oxidation.

Asymbiotic Germination and Low-temperature in Vitro Conservation of Cymbidium Dayanum

[Objective] The aim of the research was to establish asymbiotic germination and low-temperature in vitro conservation technique system of Cymbidium dayanum by using plant tissue culture technique to realize its rapid propagation and long-term conservation in vitro. [Method] With mature seeds of C. dayanum as explants, different media were selected to establish asymbiotic germination technique system. With protocorms as materials, conservation, resumptive proliferation and plant regeneration conditions were selected to establish low-temperature in vitro conservation technique system preliminarily. [Result] Mature seeds of C. dayanum could germinate after cultured 90 days on MS media as well as ＂Hyponex 1＂ media. The germination rate reached more than 98%. Protocorms inoculated in ＂Hyponex 1＂ media could be conserved continuously at 5 ℃ in dark for more than 18 months and the survival rate could reach 90%. Conserved protocorms could realize resumptive preliferation culture both on 1/2 MS and ＂Hyponex 1＂ media. The seed- ling-strengthening and rooting media were 1/2 MS media. [Conclusion] This research provided practical basis for in vitro conservation and rapid propagation of C. dayanum germplasm resource.

生成式人工智能赋能本科生科研能力培养——ChatGPT支持的CUREs教学模式

为促进高等教育中高素质创新人才培养,构建以学生为中心的科研训练与课程教学整合模式是有效途径。当前基于课程的本科生科研体验(CUREs)教学模式虽在增强学生对科学本质的理解等方面具有一定优势,但在激发学生研究动机方面存在一些不足。将支持高效反馈的生成式人工智能ChatGPT引入人机协作研究过程中,有助于改善学生的科研体验,推动科研项目化学习。通过对ChatGPT支持的CUREs教学模式的设计与实施,发现该模式有助于培养学生的科研能力,提升他们的科研知识水平、科研技能水平和科研情感水平。尽管学生认同该教学模式的有效性和易用性,但其实际效果的发挥仍需人类智慧的参与。未来需要持续升级和优化生成式人工智能技术,确保技术应用高效且符合伦理标准;应用生成式人工智能技术重构教学模式,并通过长周期、跨场域实践检验其应用效果;强调人工智能与人类智慧的互补协作,真正实现生成式人工智能赋能学生科研能力提升。

Effects of Exogenous Glycine Betaine on Oxidation Metabolism in Cucumbers during Low-temperature Storage

[Objective] This study aimed to analyze the effects of different concentrations of glycine betaine（GB） on oxidation metabolism in cucumbers under low-temperature stress and to investigate the possible mechanism of low-temperature resistance in cucumber during low-temperature storage. [Method] Cucumber cultivar Zhongnong No.8 was treated with 0, 5, 10 and 15 mmol/L GB solutions for 15 min and stored at 4 ℃. Changes in oxidative metabolism-related parameters were observed. [Result] Increasing exogenous GB concentration could enhance GB content in cucumbers, decline lipoxygenase（LOX） activity, improve peroxidase（POD） and catalase（CAT） activities, remove effectively hydrogen peroxide（H2O2） and reduce the accumulation of malondialdehyde（MDA）. [Conclusion] Treating cucumbers with10 mmol/L GB exhibited the most remarkable effect.

Effect of low curing temperature on the anticorrosion performance of composite coatings reinforced with modified Fe_(3)O_(4)

In this manuscript,the neat epoxy(EP)and functionalized Fe_(3)O_(4)(G-Fe_(3)O_(4))reinforced epoxy(G-Fe_(3)O_(4)/EP)coatings were cured under different temperatures,and the effect of the low curing temperature on the anticorrosion performance was investigated.The experimental results show that the epoxy-amine ring-open addition reaction mainly exists in the curing process,and the activation energies of the reaction for the two coatings are 55.84 and 53.29 kJ/mol,respectively.For the coatings cured at the low temperature,almost no pores could be detected on the fracture surface,but the presentence of the rough regions reflects the poor curing state.As compared with the samples cured at the high temperature,the anticorrosion performance of the coatings with the low curing temperature is worse,and the decrease rate of the anticorrosion performance is slower,because of the poor curing state and low adhesion obtained at the low temperature.

Study on Loading Leaves Density with Cage Clamp on Quality of Cured Tobaccos in Bulk-Curing Barn

In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .

Curing Characteristics and Suitable Harvest Maturity of Fresh Flue-cured Tobacco Leaves in Ankang Tobacco Growing Areas

CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the water Ioss of K326 was sIow,and the Ieaves were resistant to curing and reIative easiIy to cure. The water Ioss of Yunyan 87 and Guiyan 4 were quick, and the Ieaves with normal resistance to curing were reIative difficuIt to cure. For Guiyan 4, the shrinkage of CM1 maturity was the Iargest. For K326 and Yunyan 87, the shrinkages of CM2 maturity were the Iargest whiIe the shrinkage of CM1 maturity was the Iowest, but the difference did not reach statistical significance. The proportion of top-middIe-grade tobacco Ieaves and average price for K326 were the highest with XM2, CM2 and BM2 maturity, and for Yunyan 87 were XM1, CM3 and BM2 maturity. For K326, Ieaves with XM2, CM2 and BM2 maturity showed the balanced chemical components and the best smoking quality.

Effects of Two Curing Methods on Quality of Yellow Sun-cured Tobacco

[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.

Effects of Different Flue-curing Barns on Aroma Quality of Upper Flue-cured Tobacco Leaves of K326

[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.

Cure Kinetics of DGEBA with Hyperbranched Poly(3-hydroxyphenyl) Phosphate as Curing Agent Studied by Non-isothermal DSC

The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.