Influences of Low-Temperature Hydrothermal Fluids on the Re-distributions and Occurrences of Associated Elements in Coal——A Case Study from the Late Permian Coals in the Zhijin Coalfield, Guizhou Province. Southern China

The occurrences of associated elements and their genetic factors in the No. 30 coal seam in the Zhijin Coalfield were studied using instrumental neutron activation analysis, inductively coupled plasma-atomic emission spectroscopy, and a scanning electron microscope equipped with an energy-dispersive X-ray analyzer. And, a microscope photometer system (Leitz MPV-Ⅲ) was used to observe the characteristics of coal petrology. According to the influence degree by the siliceous low-temperature hydrothermal fluids, the organic matter is divided into four types: A, B, C, and D of the hydrothermally-altered organic matter (HAOM). The study shows that the high content of Fe (2.31%) is not from pyrite, but mostly from the siliceous low-temperature hydrothermal fluids. The occurrences of the associated elements in the four organic matter types are different. The contents of Fe, Si, and Al are decreasing, but S and Cu are increasing in the order of the HAOM-A, HAOM-B, HAOM-C, and HAOM-D. The losing rate of sulfur in organic matter is 0.35% and the content of Fe taken from the low-temperature hydrothermal fluids into the organic matter is 0.794% during the siliceous low-temperature hydrothermal fluids invading the coal seam. The above facts indicate that the low-temperature hydrothermal fluids play a crucial role in the re-distributions and occurrences of associated elements in coal.

Characterization of Pr-CeO_2 Nano-crystallites Prepared by Low-temperature Combustion&Hydrothermal Synthesis

Pr-CeO2 Nano-crystalline red pigments were prepared by low-temperature combustion with a later hydrothermal treatment using Ce（NO3）3·6H2O and Pr6O11 as raw materials. The phase composition, coloring mechanism and morphology of pigments were analyzed by XRD, SEM, EDS and XPS. Results showed that Pr-CeO2 solid solution with a fluorite structure was obtained by the diffusion of Pr^＋3 into CeO2 crystal lattice during the synthesis process. XPS analysis indicated that Pr^＋3 substitutes Ce^＋4 in CeO2 and is compensated by oxygen vacancies. Compared with low-temperature combustion synthesis, the Pr-CeO2 pigments prepared with a subsequent hydrothermal treatment have an average grain size of about 16.70 nm, and the crystallinity and red tonality are improved.

Geochemistry of hydrothermal gold deposits:A review

Mineral assemblages formed during hydrothermal alteration reflect the geochemical composition of ore-forming fluids. Gold is mainly transported in solution as Au-CI and Au-S complexes. The change of physicochemical conditions such as temperature, pressure, oxygen fugacity, and sulfur fugacity are effective mechanisms for gold precipitation. Gold tends to be concentrated in the vapor phase of fluids at high temperatures and pressures. Au-As and Au-Sb associations are common in gold deposit. Native antimony and/or arsenic -- native gold assemblages may precipitate from hydrothermal fluids with low sulfur fugacity. Hydrothermal fluids forming epithermal gold deposits are Au-saturated in most cases, whereas fluids of Carlin-type are Au-undersaturated. Quasi-steady As-bearing pyrite extracts solid solution Au from hydrothermal fluids through absorption. The capability of As-bearing pyrite to absorb An from under-saturated fluid is the key to the formation of large-scale Carlin-type deposits. With increasing new data, studies on the geochemistry of gold deposits can be used to trace the origin of ore-forming fluids, the source of gold, and the transporting form of Au and other ore-forming elements, such as Si, S, F, Cl, As and Ag.

Low-Temperature Growth of ZnO Films on GaAs by Metal Organic Chemical Vapor Deposition

ZnO thin films were grown on GaAs （001） substrates by metal-organic chemical vapor deposition （MOCVD） at low temperatures ranging from 100 to 400℃. DEZn and 1-12 O were used as the zinc precursor and oxygen precursor, respectively. The effects of the growth temperatures on the growth characteristics and optical properties of ZnO films were investigated. The X-ray diffraction measurement （XRD） results indicated that all the thin films were grown with highly c- axis orientation. The surface morphologies and crystal properties of the films were critically dependent on the growth temperatures. Although there was no evidence of epitaxial growth, the scanning electron microscopy （SEM） image of ZnO film grown at 400℃ revealed the presence of ZnO microcrystallines with closed packed hexagon structure. The photoluminescence spectrum at room temperature showed only bright band-edge （3. 33eV） emissions with little or no deep-level e- mission related to defects.

Geochemistry of Rare Earth Elements in Hydrothermal Ore Deposit in Heishan Area,Shaanxi Province

The study on rare earth elements in hydrothermal ore deposit in Heishan area indicates that the REE concentration in rock with very weak negative Ce and Eu anomaly is far higher than those in ore. The REE pattern in ore is characterized by very low REE concentration, typical enrichment in LRE and distinctive negative Eu and Ce anomaly. δ Eu and δ Ce values vary from 0 51～0 6 to 0 71～0 77 and 0 84～0 88 to 0 60～0 78, respectively, as shown in samples from Fe Cu ore to Au ore. Different δ Eu and δ Ce values reveal that temperature gradually decreases and oxygen fugacity gradually increases when ore bearing hydrothermal solution evolves from early to late stage. It is likely that REE in solution is mainly transported in the forms of(RE(CO 3) 3F) 4- , (RE(CO 3)F 2) -, (RE(F,Cl) 2) + , (RE(CO 3) 3) 3- and (RE(CO 3) 4) 5- complexes.

Rare earth element geochemistry of hydrothermal deposits from Southwest Indian Ridge

The REE compositions of hydrothermal deposits and basalt samples from the Southwest Indian Ridge （SWIR） were determined with ICP-MS. The results show that there are significant differences between different types of samples although all samples show relative LREE enrichment. The contents of REE in hydrothermal sulfides and alterated rocks samples are lower （from 7.036× 10^-6 to 23.660×10^-6）, while those in the white chimney deposits are relatively higher （ranging from 84.496 × 10^-6 to 103.511 × 10^- 6）. Both of them are lower than basalts. Chondrite-normalized REE distribution patterns show that sulfides and alterated rocks samples are characterized by significant positive Eu anomalies. On the contrary, white chimney deposits have obvious negative Eu anomalies, which may be caused by abundant calcite existing in the white chimney samples. Both the content and distribution pattern of REE in sulfides suggest that REE most possibly is originally derived from hydrothermal fluids, but influenced by the submarine reducing ore-forming environment, seawater convection, mineral compositions as well as the constraint of mineral crystallizations.

Using trace elements of magnetite to constrain the origin of the Pingchuan hydrothermal low-Ti magnetite deposit in the Panxi area, SW China

The Pingchuan iron deposit, located in the Yanyuan region of Sichuan Province, SW China, has an ore reserve of 40 Mt with ~60 wt% Fe. Its genesis is still poorly understood. The Pingchuan iron deposit has a paragenetic sequence of an early Fe-oxide–Pyrite stage(Ⅰ) and a late Fe-oxide–pyrrhotite stage(Ⅱ). Stage Ⅰ magnetite grains are generally fragmented, euhedral–subhedral, largesized crystals accompanying with slightly postdated pyrite.Stage Ⅱ magnetite grains are mostly unfragmented, anhedral, relatively small-sized grains that co-exist with pyrrhotite. Combined with micro-textural features and previously-obtained geochronological data, we consider that these two stages of iron mineralization in the Pingchuan deposit correspond to the Permian ELIP magmatism and Cenozoic fault activity event. Both the Stage Ⅰ and Ⅱ magnetites are characterized with overall lower contents of trace elements(including Cr, Ti, V, and Ni) than the ELIP magmatic magnetite, which suggests a hydrothermal origin for them. ‘‘Skarn-like'' enrichment in Sn, Mn, and Zn in the Stage Ⅰ magnetite grains indicate significant material contributions from carbonate wall-rocks due to water–rock interaction in ore-forming processes. Stage Ⅱ magnetite grains contain higher Mn concentrations than Stage Ⅰ magnetite grains, which possibly implies more contribution from carbonate rocks. In multiple-element diagrams, the Stage Ⅰ magnetite shows systematic similarities to Kiruna-type magnetite rather than those from other types of deposits. Combined with geological features and previous studies on oxygen isotopes, we conclude that hydrothermal fluids have played a key role in the generation of the Pingchuan low-Ti iron deposit.

Lincang Superlarge Germanium Deposit in Yunnan Province,China: Sedimentation,Diagenesis,Hydrothermal Process and Mineralization

The mineralization is related closely to sedimentation, diagenesis and hydrothermal processes. In this paper, investigations are carried out on coal occurrence, maceral composition, inorganic minerals, trace elements and huminite reflectance. It is concluded that the source of Lincang superlarge deposit is mainly the muscovite granite in the west edge of the basin. During sedimentation, Ge (germanium) was leached out and entered the basin. Ge was adsorbed by lower organism and humic substances in water. Lincang lignite underwent three thermal processes: peatification, early diagenesis and hydrothermal transformation. During peatification, Ge was adsorbed or complexed by humic colloids. During early diagenesis, the Ge associated with humic acids was hard to mobilize or transport. Most of Ge entered the structure of huminite while a small amount of Ge was associated with residual humic acids as complex or humate. During hydrothermal transformation, the heated natural water or deep fluid from basement encountered the coal layer within tectonic weak zone. SO 2- 4 was reduced by coal organic matter. Pyrite and calcite formed. Hydrothermal process did not contribute significantly to mineralization.

Numerical simulation of hydrothermal mineralization associated with simplified chemical reactions in Kaerqueka polymetallic deposit, Qinghai, China

The Kaerqueka polymetallic deposit, Qinghai, China, is one of the typical skarn-type polymetallic ore deposits in the Qimantage metallogenic belt. The dynamic mechanism on the formation of the Kaerqueka polymetallic deposit is always an interesting topic of research. We used the finite difference method to model the mineralizing process of the chalcopyrite in this region with considering the field geological features, mineralogy and geochemistry. In particular, the modern mineralization theory was used to quantitatively estimate the related chemical reactions associated with the chalcopyrite formation in the Kaerqueka polymetallic deposit. The numerical results indicate that the hydrothermal fluid flow is a key controlling factor of mineralization in this area and the temperature gradient is the driving force of pore-fluid flow. The metallogenic temperature of chalcopyrite in the Kaerqueka polymetallic deposit is between 250 and 350 ℃. The corresponding computational results have been verified by the field observations. It has been further demonstrated that the simulation results of coupled models in the field of emerging computational geosciences can enhance our understanding of the ore-forming processes in this area.

DISCOVERY AND THE IMPLICATION OF A HYDROTHERMAL-METASOMATIC SKARN DEPOSIT IN GANGDISE TECTONIC ZONE,TIBET

Hydrothermal activity from a hydrothermal circulatory system is a special geological event, it is of importance to the formation of some massive sulfide deposits (hydrothermal deposits). The Authors think that Jiama polymetallic ore deposit in Gangdise tectonic zone, Tibet is a special skarn deposit i.e. a “hydrothermal\|metasomatic skarn deposit" bound up with benthonic hydrothermal circulatory system. Its important characteristics are as follows: 1 Evolution of the Gangdise island arc in studied area may be divided into three stages Middle Jurassic volcanic arc stage; Middle—Late Jurassic and Early Cretaceous inter arc sedimentary basin stage; and Eogene magmatic arc stage. The deposit is confined to the inter arc sedimentary basin. Existing data indicate that the volcanic arc provided Jiama deposit with abundant ore\|forming material; the inter arc sedimentary basin provided Jiama deposit with absolutely necessary space; the magmatic arc created reconcentration condition for the Jiama deposit.

Double Convective Hydrothermal System beneath Massive Sulfide Orebody in Gacun Deposit,Southwestern China

The Gacun Kuroko-type deposit, Southwestern China, is hosted in rhyolitic rocks associated with the underlying mafic rocks occurred in the - 1000 m deep fault - bounded basin within the intra -arc rifting zone which formed on the Triassic Yidun island - arc. Two vertically separated alteration systems are recognized: one is conformable or semiconformable alteration zone developed in - 150 m thick mafic unit 1-1.5 km below the massive sulfide ore body; the other is discordant alteration pipe directly surrounded around stockwork ore within rhyolitic unit. The lower conformable alteration zone extending for several kilometers along strike is characterized by silicification and epidotization which result in the development of quartz vein and quartz-epidote vein systems in mafic lava flows and replacement of primary minerals and groundmass in spilitized mafic volcanics and dikes by quartz, epidote - group minerals and sodic plagioclase. Sulfides often occur in the vein system and altered mafic volcanics. Quartz solubility relation indicates that silicification is a consequence of interaction of Si- saturated fluids with mafic rocks in a higher temperature system (T>340℃), intensifying by intrusion of mafic dike or high-level acidic magma chamber. The alteration pipe of diameter about 2 km shows a similar mineralogical zoning to Kuroko deposits of Japan. The sequence is quartz + hyalophane; sericite + chlorite + quartz and zeolite-like zones from core to margins of the pipe. The chlorite core only occurs in the root part of the alteration pipe and downwards transfers into epidote - chlorite and epidote - quartz vein swarm extending 500 m downwards. The felsic rocks away from the orebody and alteration pipe took place district-scale alteration, which has typical low-temperature mineral association: illite + albite + quartz + calcite. Whole -rock and quartz δ18O values indicate that district - scale alteration is a result of interaction of seawater with rocks at lower temperature (T<200℃)under water-dominated condition. However, the altered rocks from the pipe show remarkably δ18O enrichment, and bulk -rock δ18O values decreased gradually toward stockwork orebody from 15.1‰-l5. 75‰ in zeolite-like zone and 12. 05‰-14. 2‰ in sericite - quartz zone to 11.3 ‰ - 14. 4‰ in quartz - hyalophane zone. The filled temperatures of fluid inclusions in quartz and sphalerite lie in the ranges of 280 -320 ℃ for quartz - hyalophane zone and 250 ℃ to 297 ℃ for sericite-quartz zone. The estimated δ18O values of hydrothermal fluids are 7. 98‰ and3.2‰, respectively, based on quartz δ18O data in the deposit. The lower conformable alteration is considered to be approximately coeval with the alteration pipe, based on the SiO2 concentration in the fluids, which restrict the main fluid - rock reaction zone to be located in mafic horizon by quartz barometer, and metal element flux calculation and sulfide - epidote vein system developed both in alteration systems. High - salinity fluid inclusions in gangue quartz (>8% eq. NaCl) from stockwork ore and in quartz phenocryst (>40% eq. NaCl) in footwall rhyolite strongly suggest the existence of hot-saline brine to react with mafic complex and leach metal components, which probably originates mainly from magmatic fluid derived from high-level acidic magma chamber. The brine layer located in mafic unit possibly heats and drives the overlying single -pass convective seawater reacting with felsic rocks. The 'density window' may be expected to occur on the interface between seawater and brine layer, when the brine becomes to be gravitationally instability by the turbulent entrainment of seawater during magmatic and/or tectonic activities. The sulfide mineralization and alteration pipe is inter preted as an effect of the 'density window' through which the mixed fluids of brine with seawater adiabatically discharges upwards.

Hydrothermal Sedimentary Mineralization of the Super-large Bamianshan Fluorite Deposit in Zhejiang Province, China

The Bamianshan fluorite deposit is a super-large one recently discovered in Zhejiang Province of China. This paper presents an analysis of its geological background, orebody and ore characteristics, petrochemical characteristics of host rocks, rare earth elements （REE） of rocks and ores, fluid inclusions in fluorite and Sm-Nd isotopic features in an effort to study its sedimentary mineralization. The result shows that the super-large Bamianshan fluorite deposit is of hydrothermal sedimentation genesis, deformed by the later hydrothermal fluid. Integrated with host rocks and orebody characteristics, it is inferred that the deposit originates from the Cambrian sedimentary rocks. And the later magmatic activities deformed some orebodies in different degrees, forming steeply dipping vein orebodies in the tectonic belts regionally.

3D PLLA/Nano-hydroxyapatite Scaffolds with Hierarchical Porous Structure Fabricated by Low-temperature Deposition Manufacturing

A new Precision Extrusion nozzle based ball screw transmission was developed. 3D hierarchical porous PLLA/nano-Hydroxyapatite（PLLA/nHA） scaffolds were fabricated by low-temperature deposition manufacturing. Scaffolds with macropores of 200-500 rtm and micropores about 10 pm were fabricated through a thorough study and control of the processing parameters, in which the processing path and speed of material extrusion determine the macropores and there is a suitable temperature zone for fabricating qualified macropores. Micropore morphology can be controlled by adjusting supercooling of solvent crystallization or adding water into the solvent system. The compressive modulus of the scaffolds in air and phosphate buffer solution was measured, which increased with HA addition. In-vitro cell culture results showed a ~ood biocomoatibilitv of PLLA/HA scaffolds with the ore-osteoblastic MC3T3-E1 cells.

Negative Haloes and Geochemical Field Systems of Hydrothermal Deposits

Primary haloes of hydrothermal deposits were previously considered as positive haloes. Although it has been recently suggested that primary haloes incude positive and negative ones, almost all the research work on primary haloes has still focused on positive haloes for various reasons. In order to understand the source of ore substances a number of large hydrothermal deposits related to magmatism including porphyry, skarn and vein type deposits have been studied. It has been found that negative haloes exist on the peripheries of positive haloes of a mineral deposit. On the basis of the study the authors propose the concept of the geochemical field system of ore-forming elements of hydrotherreal deposits, i. e., with the orebody as the centre outwards there occur the mineralized field, positive halo field, depleted field and background field successively.

Metallogenic Regularity of Hydrothermal Uranium Deposits in the Migmatite of the Kangdian Axis

1 Introduction The Kangdian axis is an important polymetallic metallogenic belt in Southwest China,and it is also an area with a lot of hydrothermal uranium mineralization(Wang Hongjun,et al.,2009.The basic

Magmatic Hydrothermal Origin of the Wenyu Copper Polymetallic Deposit, Southern Lancangjiang Zone, SW China

The Wenyu copper polymetallic deposit, with proven reserves of about 0.23 Mt Cu, 394 t Ag and 0.04 Mt Pb, is located in the central part of the Lancangjiang volcanic rock belt （Fig. l a）, which is one of the most potential copper polymetallic exploration areas in SW China.

Low-Temperature Soft-Cover-Assisted Hydrolysis Deposition of Large-Scale TiO_2 Layer for Efficient Perovskite Solar Modules

Perovskite solar cells with TiO_2 electron transport layers exhibit power conversion efficiency(PCE) as high as 22.7% in single cells. However, the preparation process of the TiO_2 layer is adopted by an unscalable method or requires high-temperature sintering, which precludes its potential use for mass production of flexible devices. In this study, a scalable low-temperature softcover-assisted hydrolysis(SAH) method is presented,where the precursor solution is sandwiched between a soft cover and preheated substrate to form a closed hydrolysis environment. Compact homogeneous TiO_2 films with a needle-like structure were obtained after the hydrolysis of a TiCl_4 aqueous solution. Moreover, by careful optimization of the TiO_2 fabrication conditions, a high PCE of 14.01% could be achieved for a solar module(4 × 4 cm^2) prepared using the SAH method. This method provides a novel approach for the efficient scale-up of the low-temperature TiO_2 film growth for industrial applications.

Hydrothermal alteration processes in the giant Dahutang tungsten deposit, South China: Implications from litho-geochemistry and mass balance calculation

The giant Dahutang tungsten(W)deposit has a total reserve of more than 1.31 Mt WO3.Veinlet-disseminated scheelite and vein type wolframite mineralization are developed in this deposit,which are related to Late Mesozoic biotite granite.Four major types of alterations,which include albitization,potassic-alteration,and greisenization,and overprinted silicification developed in contact zone.The mass balance calculate of the four alteration types were used to further understanding of the mineralization process.The fresh porphyritic biotite granite has high Nb,Ta,and W,but low Ca and Sr while the Jiuling granodiorite has high Ca and Sr,but low Nb,Ta,and W concentrations.The altered porphyritic biotite granite indicated that the Nb,Ta,and W were leached out from the fresh porphyritic biotite granite,especially by sodic alteration.The low Ca and Sr contents of the altered Neoproterozoic Jiuling granodiorite indicate that Ca and Sr had been leached out from the fresh granodiorite by the fluid from Mesozoic porphyritic biotite granites.The metal W of the Dahutang deposit was mainly derived from the fluid exsolution from the melt and alteration of W-bearing granites.This study of alteration presents a new hydrothermal circulation model to understand tungsten mineralization in the Dahutang deposit.

+-Evidence of Porphyry Deposits in the Ntem Complex: A Case Study from Structural and Hydrothermal Alteration Zones Mapping through Landsat-8 OLI, Aeromagnetic and Geological Data Integration in the Yaounde-Sangmelima Region (Southern Cameroon)

A semi-regional study was carried out in the Yaounde-Sangmelima area, a densely vegetated tropical region of southern Cameroon located in the Central Africa Fold Belt (CAFB)/Congo Craton (CC) transition zone. Towards structural lineaments and predictive hydrothermal porphyry deposits mapping, an integrated analysis of Landsat-8 OLI data, aeromagnetic, geological and mineral indices maps was performed. The Remote sensing using False colour composite images involving bands combinations and Crosta method (features oriented principal components analysis) enabled the mapping of the gneisses and schists domains without a clear differentiation between the Yaounde and Mbalmayo schists;despite the reflectance anomalies evidenced NW of Akonolinga, hydrothermal alterations in the study area failed to be detected. Besides, aeromagnetics depicted a moderately fractured northern zone (the CAFB) contrasting with a high densely fractured zone (the CC, known as Ntem complex). The Ntem complex displays signatures of a meta-igneous, an intrusive complex, greenstone relics south of Sangmelima and hydrothermal activity. Indeed, CET porphyry analysis tool detected many porphyry centres. In general, the study revealed many lineaments including contacts, fractures faults zones and strike-slips. The major aeromagnetics structures are SW-NE to WSW-ENE and WNW-ESE to NW-SE while those from Landsat-8 are NE-SW, WNW-ESE, NW-SE, WSW-ENE and NW-ESE to NNW-SSE. Together, these structures depict trans-compressions or trans-tensions corresponding to a broad NE-SW strike-slips channel that affect both the CAFB and the Ntem Complex, and they control the intrusions thus confirming a pervasive hydrothermal activity within the Ntem Complex. The proximity or coincidence of these porphyry centres with some mapped Iron-Gold affiliated mineral indices and porphyry granites indicate the possible occurrence of many hydrothermal ore deposits. These results show the high probability for the Ntem complex to host porphyry deposits so they may serve to boost mineral exploration in the Yaounde-Sangmelima region and in the entire southern Cameroon as well.

Hydrothermal Mobilization and Enrichment of Iron in the Iron Deposits of the Middle-Lower Yangtze Valley District

There are two main types of iron deposits in the Middle-Lower Yangtze Valley district.Both of them underwent post-magmatic hydrothermal processes during ore formation.Iron in the hydrothermal ore bodies was derived largely through mobilization from substantially consolidated diroitic intrusives.Wall-roch alteration zonation indicates that iron-mobilizing hydrothermal fluids evolved in a trend of decreasing alkalinity,which is suggested by regularly distributed wall-rock alterations formed by iron-mobilizing hydrothermal fluids and is in contradiction with the current chloride,chloride complex and bicarbonate models for iron mobilization.The close association of carbonatization with iron ores and the high concentrations of reduced gases such as CO,CH4 and H2 in fluid inclusions suggest that iron is most probably transported in the form of iron carbonyls during post-magmatic hydrothermal processes. In the light of the iron carbonyl mobilization model,explanations are made of the constraints on ores of some geologic factors such as melanocratic alteration,carbonatization,carbonate strata,structural fractures,cyptoexplosive pipes and embryo ores.