Fast and Balanced Charge Transport Enabled by Solution-Processed Metal Oxide Layers for Efficient and Stable Inverted Perovskite Solar Cells

Metal oxide charge transport materials are preferable for realizing long-term stable and potentially low-cost perovskite solar cells(PSCs).However,due to some technical difficulties(e.g.,intricate fabrication protocols,high-temperature heating process,incompatible solvents,etc.),it is still challenging to achieve efficient and reliable all-metal-oxide-based devices.Here,we developed efficient inverted PSCs(IPSCs)based on solution-processed nickel oxide(NiO_(x))and tin oxide(SnO_(2))nanoparticles,working as hole and electron transport materials respectively,enabling a fast and balanced charge transfer for photogenerated charge carriers.Through further understanding and optimizing the perovskite/metal oxide interfaces,we have realized an outstanding power conversion efficiency(PCE)of 23.5%(the bandgap of the perovskite is 1.62 eV),which is the highest efficiency among IPSCs based on all-metal-oxide charge transport materials.Thanks to these stable metal oxides and improved interface properties,ambient stability(retaining 95%of initial PCE after 1 month),thermal stability(retaining 80%of initial PCE after 2 weeks)and light stability(retaining 90%of initial PCE after 1000 hours aging)of resultant devices are enhanced significantly.In addition,owing to the low-temperature fabrication procedures of the entire device,we have obtained a PCE of over 21%for flexible IPSCs with enhanced operational stability.

Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO_(2)

CsPbX_(3)-based(X=I,Br,Cl)inorganic perovskite solar cells(PSCs)prepared by low-temperature process have attracted much attention because of their low cost and excellent thermal stability.However,the high trap state density and serious charge recombination between low-temperature processed TiO_(2)film and inorganic perovskite layer interface seriously restrict the performance of all-inorganic PSCs.Here a thin polyethylene oxide(PEO)layer is employed to modify TiO_(2)film to passivate traps and promote carrier collection.The impacts of PEO layer on microstructure and photoelectric characteristics of TiO_(2)film and related devices are systematically studied.Characterization results suggest that PEO modification can reduce the surface roughness of TiO_(2)film,decrease its average surface potential,and passivate trap states.At optimal conditions,the champion efficiency of CsPbI_(2)Br PSCs with PEO-modified TiO_(2)(PEO-PSCs)has been improved to 11.24%from 9.03%of reference PSCs.Moreover,the hysteresis behavior and charge recombination have been suppressed in PEO-PSCs.

Generativity of Self-Organizing Processes and Their Correlative Description in Terms of a Formal Language of Meta-Ordinal Generative Nature, in the Light of the Maximum Ordinality Principle and the Explicit Solution to the “Three-Body Problem”

The main objective of this paper is to demonstrate that the internal processes of Self-Organizing Systems represent a unique and singular process, characterized by their specific generativity. This process can be modeled using the Maximum Ordinality Principle and its associated formal language, known as the “Incipient” Differential Calculus (IDC).

Low-temperature phase transitions of sodium aluminate solutions

A series of low-temperature phase transitions of sodium aluminate solutions were studied by differential scanning calorimetry (DSC) and Raman spectroscopy. The results indicate that NaOH concentration is a primary impact factor for the binary eutectic point and ice melting temperature of sodium aluminate solutions with low NaOH concentration. In addition, the phase transition process of sodium aluminate solutions with low NaOH concentration from 123.15 to 283.15 K is divided into four steps: non-crystal to crystal, ternary eutectic reaction, binary eutectic reaction and ice melt. The projection phase diagram of NaOH-Al(OH)3-H2O system at low temperature was plotted, in which the ternary eutectic temperature for sodium aluminate solutions is 183.15 K.

Optimization of separation processing of copper and iron of dump bioleaching solution by Lix 984N in Dexing Copper Mine

The effects of the concentration of Lix 984N,phase ratio,initial pH value of aqueous phase and extraction time on the extraction of copper and iron under the condition of low Cu2+ /Fe3+ ratio in dump bioleaching solution of Dexing Copper Mine were explored.The optimal conditions of extraction are as follows: the concentration of Lix 984N 10%; the phase ratio (O/A) 1:1; the initial pH value of aqueous phase 1.5 and the mixing time 2 min.The stripping experiments show that H2SO4 solution could efficiently recover copper from the organic phase under the optimal conditions.

Modeling, Optimization, and Control of Solution Purification Process in Zinc Hydrometallurgy

The solution purification process is an essential step in zinc hydrometallurgy. The performance of solution purification directly affects the normal functioning and economical benefits of zinc hydrometallurgy. This paper summarizes the authors' recent work on the modeling, optimization, and control of solution purification process. The online measurable property of the oxidation reduction potential(ORP) and the multiple reactors, multiple running statuses characteristic of the solution purification process are extensively utilized in this research. The absence of reliable online equipment for detecting the impurity ion concentration is circumvented by introducing the oxidationreduction potential into the kinetic model. A steady-state multiple reactors gradient optimization, unsteady-state operationalpattern adjustment strategy, and a process evaluation strategy based on the oxidation-reduction potential are proposed. The effectiveness of the proposed research is demonstrated by its industrial experiment.

Cyclic metallurgical process for extracting V and Cr from vanadium slag: Part Ⅱ. Separation and recovery of Cr from vanadium precipitated solution

Cyclic metallurgical process for separation and recovery of Cr from vanadium precipitated solution by precipitation with PbCO_(3)and leaching with Na_(2)CO_(3)was investigated.The concentration of Cr residue in the solution decreases from 2.360 to 0.001 g/L by adding PbCO_(3)into vanadium precipitated solution according to Pb/Cr molar ratio of 2.5,adjusting the pH to 3.0 and stirring for 180 min at 30℃.Then,the precipitates were leached with hot Na_(2)CO_(3)solution to obtain leaching solution containing Na_(2)CrO_(4)and leaching residue containing PbCO_(3).The leaching efficiency of Cr reaches 96.43%by adding the precipitates into 0.5 mol/L Na_(2)CO_(3)solution with the mass ratio of liquid to solid(L/S)of 10:1 mL/g and stirring for 60 min under pH 9.5 at 70℃.After filtration,leaching residue is reused in Cr precipitation and leaching solution is used to circularly leach the Cr precipitates until Na_(2)CrO_(4)approaches the saturation.Finally,the product of Na_(2)CrO_(4)·4H_(2)O is obtained by evaporation and crystallization of leaching solution.

Current status and trends of carbon-based electrodes for fully solution-processed perovskite solar cells

Perovskite solar cells(PSCs) have revolutionized photovoltaic research. As a result, a certified power conversion efficiency(PCE) of 25.5% was recorded in late 2020. Although this efficiency is comparable with silicon solar cells;some issues remain partially unsolved, such as lead toxicity, instability of perovskite materials under continuous illumination, moisture and oxygen, and degradation of the metallic counter electrodes. As an alternative to tackle this last concern, carbon materials have been recently used, due to their good electrical and thermal conductivity, and chemical stability, which makes them one of the most promising materials to replace metallic counter electrodes in the fabrication of PSCs. This review highlights the recent advances of carbon-based PSCs, where the carbon electrode(CE) is the main actor.CEs have become very promising candidates for PSCs;they are mainly fabricated using a simple combination of graphite and carbon black powders embedded in a binder matrix, giving a paste that is then solution-processable, resulting in devices with improved quality stability, when compared to metallic electrodes. In this review, CE’s composition is emphasized, since it can give both, high and lowtemperature processed electrodes, compatible with different device configurations. Finally, the tendencies and opportunities to use CE in PSCs devices are presented.

Numerical modeling dynamic process of multi-feed microwave heating of industrial solution media

The exothermic efficiency of microwave heating an electrolyte/water solution is remarkably high due to the dielectric heating by orientation polarization of water and resistance heating by the Joule process occurred simultaneously compared with pure water.A three-dimensional finite element numerical model of multi-feed microwave heating industrial liquids continuously flowing in a meter-scale circular tube is presented.The temperature field inside the applicator tube in the cavity is solved by COMSOL Multiphysics and professional programming to describe the momentum,energy and Maxwell's equations.The evaluations of the electromagnetic field,the temperature distribution and the velocity field are simulated for the fluids dynamically heated by singleand multi-feed microwave system,respectively.Both the pilot experimental investigations and numerical results of microwave with single-feed heating for fluids with different effective permittivity and flow rates show that the presented numerical modeling makes it possible to analyze dynamic process of multi-feed microwave heating the industrial liquid.The study aids in enhancing the understanding and optimizing of dynamic process in the use of multi-feed microwave heating industrial continuous flow for a variety of material properties and technical parameters.

Solution-processed perovskite solar cells

Perovskite solar cells(PSCs) have emerged as one of the most promising candidates for photovoltaic applications. Low-cost, low-temperature solution processes including coating and printing techniques makes PSCs promising for the greatly potential commercialization due to the scalability and compatibility with large-scale, roll-to-roll manufacturing processes. In this review, we focus on the solution deposition of charge transport layers and perovskite absorption layer in both mesoporous and planar structural PSC devices. Furthermore, the most recent design strategies via solution deposition are presented as well, which have been explored to enlarge the active area, enhance the crystallization and passivate the defects, leading to the performance improvement of PSC devices.

A Two-step Design Method for Shaft Work Targeting on Low-temperature Process

In low-temperature processes, there are interactions between heat exchanger network(HEN) and refrigeration system. The modification on HEN of the chilling train for increasing energy recovery does not always coordinate with the minimum shaft work consumption of the corresponding refrigeration system. In this paper, a systematic approach for optimizing low-temperature system is presented through mathematical method and exergy analysis. The possibility of "pockets", which appears as right nose section in the grand composite curve(EGCC) of the process, is first optimized. The EGCC with the pockets cutting down is designed as a separate part. A case study is used to illustrate the application of the approach for a HEN of a chilling train with propylene and ethylene refrigerant system in an ethylene production process.

Solution‑Processed Transparent Conducting Electrodes for Flexible Organic Solar Cells with 16.61% Efficiency

Nonfullerene organic solar cells(OSCs)have achieved breakthrough with pushing the efficiency exceeding 17%.While this shed light on OSC commercialization,high-performance flexible OSCs should be pursued through solution manufacturing.Herein,we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid(CF3SO3H).Through a low-concentration and low-temperature CF3SO3H doping,the conducting polymer anodes exhibited a main sheet resistance of 35Ωsq−1(minimum value:32Ωsq−1),a raised work function(≈5.0 eV),a superior wettability,and a high electrical stability.The high work function minimized the energy level mismatch among the anodes,hole-transporting layers and electron-donors of the active layers,thereby leading to an enhanced carrier extraction.The solution-processed flexible OSCs yielded a record-high efficiency of 16.41%(maximum value:16.61%).Besides,the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85°C,demonstrating a high flexibility and a good thermal stability.

Cyclic metallurgical process for extracting Ⅴ and Cr from vanadium slag: Part Ⅰ. Separation and recovery of Ⅴ from chromium-containing vanadate solution

The separation and recovery of V from chromium-containing vanadate solution were investigated by a cyclic metallurgical process including selective precipitation of vanadium,vanadium leaching and preparation of vanadium pentoxide.By adding Ca(OH)_(2) and ball milling,not only the V in the solution can be selectively precipitated,but also the leaching kinetics of the precipitate is significantly improved.The precipitation efficiency of V is 99.59%by adding Ca(OH)_(2) according to Ca/V molar ratio of 1.75:1 into chromium-containing vanadate solution and ball milling for 60 min at room temperature,while the content of Cr in the precipitate is 0.04%.The leaching rate of V reaches 99.35%by adding NaHCO_(3) into water according to NaHCO_(3)/V molar ratio of 2.74:1 to leach V from the precipitate with L/S ratio of 4:1 mL/g and stirring for 60 min at room temperature.The crystals of NH_(4)VO_(3) are obtained by adjusting the leaching solution pH to be 8.0 with CO2 and then adding NH_(4)HCO_(3) according to NH_(4)HCO_(3)/NaVO_(3) molar ratio of 1:1 and stirring for 8 h at room temperature.After filtration,the crystallized solution containing ammonia is reused to leach the precipitate of calcium vanadates,and the leaching efficiency of V is>99%after stirring for 1 h at room temperature.Finally,the product of V_(2)O_(5) with purity of 99.6%is obtained by calcining the crystals at 560℃ for 2 h.

Zinc isotope fractionation under vaporization processes and in aqueous solutions

Equilibrium Zn isotope fractionation was inves- tigated using first-principles quantum chemistry methods at the B3LYP/6-311G level. The volume variable cluster model method was used to calculate isotope fractionation factors of sphalerite, smithsonite, calcite, anorthite, for- sterite, and enstatite. The water-droplet method was used to calculate Zn isotope fractionation factors of Zn^2＋-bearing aqueous species; their reduced partition function ratio factors decreased in the order [Zn（H2O）6]^2＋ 〉 [ZnCl（H2O）5]^ ＋ 〉 [ZnCl2（H2O）4] 〉 [ZnCl3（H20）2]^-〉 ZnCl4]^2-. Gas- eous ZnCl2 was also calculated for vaporization processes. Kinetic isotope fractionation of diffusional processes in a vacuum was directly calculated using formulas provided by Richter and co-workers. Our calculations show that in addition to the kinetic isotope effect of diffusional processes, equilibrium isotope fractionation also contributed nontriv- ially to observed Zn isotope fractionation of vaporization processes. The calculated net Zn isotope fractionation of vaporization processes was 7-7.5‰, with ZnCl2 as the gas- eous species. This matches experimental observations of the range of Zn isotope distribution of lunar samples. Therefore, vaporization processes may be the cause of the large distri- bution of Zn isotope signals found on the Moon. However, we cannot further distinguish the origin of such vaporization processes; it might be due either to igneous rock melting inmeteorite bombardments or to a giant impact event. Fur- thermore, isotope fractionation between Zn-bearing aqueous species and minerals that we have provided helps explain Zn isotope data in the fields of ore deposits and petrology.

ANALYTICAL SOLUTION OF FILLING AND EXHAUSTING PROCESS IN PNEUMATIC SYSTEM

The filling and exhausting processes in a pneumatic system are involved with many factors, and numerical solutions of many partial differential equations are always adapted in the study of those processes, which have been proved to be troublesome and less intuitive. Analytical solutions based on loss-less tube model and average friction tube model are found respectively by using fluid net theory, and they fit the experimental results well. The research work shows that： Fluid net theory can be used to solve the analytical solution of filling and exhausting processes of pneumatic system, and the result of loss-less tube model is close to that of average friction model, so loss-less tube model is recommended since it is simpler, and the difference between filling time and exhausting time is determined by initial and final pressures, the volume of container and the section area of tube, and has nothing to do with the length of the tube.

Flexible and stretchable photodetectors and gas sensors for wearable healthcare based on solution-processable metal chalcogenides

Wearable smart sensors are considered to be the new generation of personal portable devices for health monitoring.By attaching to the skin surface,these sensors are closely related to body signals(such as heart rate,blood oxygen saturation,breath markers,etc.)and ambient signals(such as ultraviolet radiation,inflammable and explosive,toxic and harmful gases),thus providing new opportunities for human activity monitoring and personal telemedicine care.Here we focus on photodetectors and gas sensors built from metal chalcogenide,which have made great progress in recent years.Firstly,we present an overview of healthcare applications based on photodetectors and gas sensors,and discuss the requirement associated with these applications in detail.We then discuss advantages and properties of solution-processable metal chalcogenides,followed by some recent achievements in health monitoring with photodetectors and gas sensors based on metal chalcogenides.Last we present further research directions and challenges to develop an integrated wearable platform for monitoring human activity and personal healthcare.

APPROACH TO KARST SOLUTION PROCESS RESPONSES ON CLIMATE

Based upon the studies of solutional rates with environment from South China to North China over a range of about 30 。 latitude, this paper discusses some of the consequence with equations. The response model shows that the precipitation is the most important factor influencing the rate of solutional denudation except the lithology, the relief etc., but it is an integrational action on the solution process; at the same time, temperature acts as a threshold in bringing the precipitation into play. These suggest that firstly, the solutional denudation process is a comprehensive response to the multiple factors; secondly, karst solution is a complex response process to the climate, and as an integrated exogenic process under the bioclimate.

Study of a mass transfer-reaction model for SO_2 absorption process using LAS/H_2SO_4 solution

A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorption process was established based on pilot-plant experiments, and the concentration distribution of components in the liquid film, and the partial pressure and mass transfer rate of SO2 along the height of the absorption tower, was calculated from this model. The numerical simulation results were compared with the experimental results and proved that the model can be used for describing the SO2 absorption process.

The comparison of the densitometric stability between E⁺and Insight intra oral films, which were processed by Champion and Teifsaz solutions

Background and objective: Proper patient treatment planning depends on correct diagnosis of its disease which could be achieved by taking high quality radiographs. Densitometric stability and film processing have important effect on the radiographs quality. The aim of the present study was to compare the densitometric stability of intra oral E+ and Insight film, which were processed by Champion and Teifsaz solutions. Materials and methods: A lab trial study was conducted. Radiographic images were taken of 56 E and Insight through lead step-wedge. Films were processed by new and in aging Champion and Teifsaz solutions every four days. After 56 days, the radiographic density of each film was calculated by Photoshop software. The contrast of each image was calculated by distracting maximum and minimum density. The resultant data were coded in SPSS software and analyzed by two-way variance analysis. Results: There is significant difference between the mean of density of processed films with the two different chemicals (Champion & Teifsaz) (P-value + and Insight films (P- value = 0.717). Conclusion: Densitometric stability of new Insight film is as the same as currently used E+ film and is better preserved with Champion chemicals than Teifsaz solutions.

New Process of Low-temperature Fixed-bed Fisher-Tropsch Reaction Using JL-GX Catalyst

On April 17, 2017 the new process of low-temperature fixed-bed Fisher-Tropsch reaction using the JL-GX catalyst developed independently by the Beijing Jingli Clean Energy Technology Company, Ltd., has been realized through the commissioning of the commercial demonstration unit at the Xingtai Rising Sun Chemical Company. In comparison with the conventional Fisher-Tropsch process, this novel Fisher-Tropsch process can be adapted to a variety of feed gases, which besides natural gas can also use the industrial offgases (including the coke oven gas, the coal seam gas, the oilfield associated gas, and the marsh gas) to manufacture synthetic chemicals through Fisher-Tropsch process.