Dynamic Multi-Physics Behaviors and Performance Loss of Cylindrical Batteries Upon Low-Velocity Impact Loading

In challenging operational environments,Lithium-ion batteries(LIBs)inevitably experience mechanical stresses,including impacts and extrusion,which can lead to battery damage,failure,and even the occurrence of fire and explosion incidents.Consequently,it is imperative to investigate the safety performance of LIBs under mechanical loads.This study is grounded in a more realistic coupling scenario consisting of electrochemical cycling and low-velocity impact.We systematically and experimentally uncovered the mechanical,electrochemical,and thermal responses,damage behavior,and corresponding mechanisms under various conditions.Our study demonstrates that higher impact energy results in increased structural stiffness,maximum temperature,and maximum voltage drop.Furthermore,heightened impact energy significantly influences the electrical resistance parameters within the internal resistance.We also examined the effects of State of Charge(SOC)and C-rates.The methodology and experimental findings will offer insights for enhancing the safety design,conducting risk assessments,and enabling the cascading utilization of energy storage systems based on LIBs.

Dynamic and electrical responses of a curved sandwich beam with glass reinforced laminate layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact

The dynamic responses and generated voltage in a curved sandwich beam with glass reinforced laminate(GRL)layers and a pliable core in the presence of a piezoelectric layer under low-velocity impact(LVI)are investigated.The current study aims to carry out a dynamic analysis on the sandwich beam when the impactor hits the top face sheet with an initial velocity.For the layer analysis,the high-order shear deformation theory(HSDT)and Frostig's second model for the displacement fields of the core layer are used.The classical non-adhesive elastic contact theory and Hunter's principle are used to calculate the dynamic responses in terms of time.In order to validate the analytical method,the outcomes of the current investigation are compared with those gained by the experimental tests carried out by other researchers for a rectangular composite plate subject to the LVI.Finite element(FE)simulations are conducted by means of the ABAQUS software.The effects of the parameters such as foam modulus,layer material,fiber angle,impactor mass,and its velocity on the generated voltage are reviewed.

Aseismic performances of constrained damping lining structures made of rubber-sand-concrete

Flexible damping technology considering aseismic materials and aseismic structures seems be a good solution for engineering structures.In this study,a constrained damping structure for underground tunnel lining,using a rubber-sand-concrete(RSC)as the aseismic material,is proposed.The aseismic performances of constrained damping structure were investigated by a series of hammer impact tests.The damping layer thickness and shape effects on the aseismic performance such as effective duration and acceleration amplitude of time-domain analysis,composite loss factor and damping ratio of the transfer function analysis,and total vibration level of octave spectrum analysis were discussed.The hammer impact tests revealed that the relationship between the aseismic performance and damping layer thickness was not linear,and that the hollow damping layer had a better aseismic performance than the flat damping layer one.The aseismic performances of constrained damping structure under different seismicity magnitudes and geological conditions were investigated.The effects of the peak ground acceleration(PGA)and tunnel overburden depth on the aseismic performances such as the maximum principal stress and equivalent plastic strain(PEEQ)were discussed.The numerical results show the constrained damping structure proposed in this paper has a good aseismic performance,with PGA in the range(0.2-1.2)g and tunnel overburden depth in the range of 0-300 m.

Quasi-static and low-velocity impact mechanical behaviors of entangled porous metallic wire material under different temperatures

To improve the defense capability of military equipment under extreme conditions,impact-resistant and high-energy-consuming materials have to be developed.The damping characteristic of entangled porous metallic wire materials(EPMWM)for vibration isolation was previously investigated.In this paper,a study focusing on the impact-resistance of EPMWM with the consideration of ambient temperature is presented.The quasi-static and low-velocity impact mechanical behavior of EPMWM under different temperatures(25℃-300℃)are systematically studied.The results of the static compression test show that the damping energy dissipation of EPMWM increases with temperature while the nonlinear damping characteristics are gradually enhanced.During the impact experiments,the impact energy loss rate of EPMWM was between 65%and 85%,while the temperatures increased from 25℃to 300℃.Moreover,under the same drop impact conditions,the overall deformation of EPMWM decreases in the temperature range of 100℃-200℃.On the other hand,the impact stiffness,energy dissipation,and impact loss factor of EPMWM significantly increase with temperature.This can be attributed to an increase in temperature,which changes the thermal expansion coefficient and contact state of the internal wire helixes.Consequently,the energy dissipation mode(dry friction,air damping,and plastic deformation)of EPMWM is also altered.Therefore,the EPMWM may act as a potential candidate material for superior energy absorption applications.

Low-velocity Impact Damage Analysis of Composite Laminates Using Self-adapting Delamination Element Method

On the basis ofa 2D 4-node Mindlin shell element method, a novel self-adapting delamination finite element method is presented, which is developed to model the delamination damage of composite laminates. In the method, the sublaminate elements are generated automatically when the delamination damage occurs or extends. Thus, the complex process and state of delamination damage can be simulated practically with high efficiency for both analysis and modeling. Based on the self-adapting delamination method, linear dynamic finite element damage analysis is performed to simulate the low-velocity impact damage process of three types of mixed woven composite laminates. Taking the frictional force among sublaminations during delaminating and the transverse normal stress into account, the analytical results are consistent with those of the experimental data.

Nonlinear progressive damage model for composite laminates used for low-velocity impact

In order to effectively describe the progressively intralaminar and interlam- inar damage for composite laminates, a three dimensional progressive damage model for composite laminates to be used for low-velocity impact is presented. Being applied to three-dimensional （3D） solid elements and cohesive elements, the nonlinear damage model can be used to analyze the dynamic performance of composite structure and its failure be- havior. For the intralaminar damage, as a function of the energy release rate, the damage model in an exponential function can describe progressive development of the damage. For the interlaminar damage, the damage evolution is described by the framework of the continuum mechanics through cohesive elements. Coding the user subroutine VUMAT of the finite element software ABAQUS/Explicit, the model is applied to an example, i.e., carbon fiber reinforced epoxy composite laminates under low-velocity impact. It is shown that the prediction of damage and deformation agrees well with the experimental results.

Combined effect of steel fibres and steel rebars on impact resistance of high performance concrete

The impact properties of normal concrete (NC) and reinforced concrete (RC) specimens,steel fibre reinforced concrete (SFRC) specimens and RC+SFRC specimens with different steel fibre dosages were investigated with the drop-weight impact test recommended by ACI Committee 544.The results indicate that the number of blows to final failure is greatly increased by addition of steel fibres.Moreover,the combination of steel fibres and steel rebars demonstrates a significant positive composite effect on the impact resistance,which results in the improvement in impact toughness of concrete specimens.In the view of variation of impact test results,the two-parameter Weibull distribution was adopted to analyze the experimental data.It is proved that the probabilistic distributions of the blows to first crack and to final failure of six types of samples approximately follow two-parameter Weibull distribution.

Numerical Simulations of the Performance of Steel Guardrails Under Vehicle Impact

Road side barriers are constructed to protect passengers and contain vehicles when a vehicle crashes into a barrier. In general, full-scale crash testing needs to be carried out if a geometrically and structurally equivalent barrier has not previously been proven to meet the requirements of containing the vehicle and dissipating sufficient impact energy for passenger protection. As full-scale crash testing is very expensive, the number of data that can be measured in a test is usually limited, and it may not always be possible to obtain good quality measurements in such a test, a reliable and efficient numerical simulation of crash testing is therefore very useful. This paper presents finite element simulations of a 3-rail steel road traffic barrier under vehicle impact. The performance levels defined in Australian Standards AS5100 Clause 10.5 for these barriers are checked. The numerical simulations show that the barrier is able to meet low performance levels. However, the maximum deceleration is higher than the acceptable limit for passenger protection. If present, a kerb launches the vehicles into the barrier, allowing for the possibility of overriding the barrier under certain circumstances, but it redirects the vehicle and reduces the incident angle, which reduces impact force on the barrier. Further investigation into all common kerb profiles on roads should be carried out, as only one kerb profile is investigated in this study.

Influence of Low-velocity Impact on Damage Behavior of Carbon Fiber-reinforced Composites

A combination of experimental measurements and numerical analysis was utilized to study the low-velocity impact damage of domestic carbon fiber-reinforced composites(CFRCs).The results indicated that the low-velocity impact damage induced pits and longitudinal cracks on the front side,oblique cracks and delaminationin on the back side.The pit depth increased with the increasing impact energy.It was demonstrated that the numerical analysis strain history curve was similar to the experimentally measured strain history curve,which verified the accuracy of numerical analysis in which the Hashin failure criterion was used.The work provides basic data and theoretical basis for the promotion and application of the domestic carbon fiber,and demonstrates the feasibility of replacing imported carbon fibers with domestic carbon fibers.

STUDY ON THE RESPONSE TO LOW-VELOCITY IMPACT OF A COMPOSITE PLATE IMPROVED BY SHAPE MEMORY ALLOY

Improvement from the pseudo-elastic effect of shape memory alloy （SMA） on the low-velocity impact （LVI） resistance of a composite plate is investigated by the finite element method （FEM）. The stiffness matrix of the dynamic finite element equation is established step by step and the martensite fraction is obtained at each time step. The direct Newmark integration method is employed in solving the dynamic finite element equation, while the impact contact force is determined using the modified Hertz＇s law. It is found that SMA can effectively improve the performance of a composite structure subjected to low-velocity impact. Numerical results show that the deflection of a SMA-hybrid composite plate has been reduced approximately by thirty percent when the volume fraction of the embedded SMA reaches 0.3.

Performance of large-diameter pneumatic down-the-hole (DTH) hammers: A focus on influences of the hammer structure

Pneumatic down-the-hole (DTH) hammer has been extensively used in air drillings through hard and ultra-hard geological formations. Numerical modeling can offer close observation on the working behaviors by visualizing internal pressure status as well as provide reliable performance predictions for large-diameter DTH hammers to which conventional empirical and experimental approaches cannot be applied. In this study, CFD simulations coupled with dynamic meshing are utilized to simulate the air flow and piston movement inside the large-diameter DTH hammers. The numerical modeling scheme is verified against a theoretical model published in literature. Effects of structural parameters on hammer performance, including piston mass, piston upper-end diameter, piston groove diameter, and lengths of intake and exhaust stroke in both front and rear chambers, are analyzed in detail by virtue of sets of numerical simulations. The simulations suggest that changing the intake stroke of front chamber has a negligible influence on hammer performance while increasing the piston groove would lower all the four indicators of hammer performance, including impact energy, impact frequency, maximum stroke, and air consumption rate. Changing the other structural parameters demonstrates mixed effects on the performance indicators. Based on the numerical simulations, a large GQ-400 DTH hammer has been designed for reduced air consumption rate and tested in a field drilling practice. The air drilling test with the designed hammer provided a penetration rate 1.7 times faster than that of conventional mud drilling.

Impact of Native Defects in the High Dielectric Constant Oxide HfSiO_4 on MOS Device Performance

Native dejects in HfSiO4 are investigated by first principles calculations. Transition levels of native detects can be accurately described by employing the nonlocal HSE06 hybrid functional. This methodology overcomes the band gap problem in traditional functionals. By band alignments among the Si, GaAs and HfSiO4. we are able to determine the position of defect levels in Si and GaAs relative to the HfSiO4 band gap. We evaluate the. possibility of these defects acting as fixed charge. Native defects lead to the change of valence and conduction band offsets. Gate leakage current is evaluated by the band offset. In addition, we also investigate diffusions of native defects, and discuss how they affect the MOS device performance.

Design Optimization of CFRP Stacking Sequence Using a Multi-Island Genetic Algorithms Under Low-velocity Impact Loads

A method to improve the low-velocity impact performance of composite laminate is proposed, and a multi-island genetic algorithm is used for the optimization of composite laminate stacking sequence under low-velocity impact loads based on a 2D dynamic impact finite element analysis. Low-velocity impact tests and compression-after impact（CAI） tests have been conducted to verify the effectiveness of optimization method. Experimental results show that the impact damage areas of the optimized laminate have been reduced by 42.1% compared to the baseline specimen, and the residual compression strength has been increased by 10.79%, from baseline specimen 156.97 MPa to optimized 173.91 MPa. The tests result shows that optimization method can effectively enhance the impact performances of the laminate.

Optimized body structure and packaging for car ODB impact performance

Front bumper, crash box and side rail are key body structural parts in front crash. Deformation space is affected by compartment packaging. The improvement suggestions are proposed to solve the problems existed in the current vehicle struc- ture and compartment packaging based on the areas that influence performance of automobile offset deformable barrier impact, such as the side rail, mounting, storage battery packaging,etc. It is proved that dO % offset crash simulation result of one certain car is well-correlated with the physical test. Optimization cases meet the crash performance requirements. The objec- tive of the analysis is to guide structural design and improves a car＇ s crash safety performance.

Associated Factors and Impacts of Social Phobia on Academic Performance among Students from the University of Parakou (UP)

Background: Social phobia disrupts students in their academic career. The aim of this research work was to study this anxious disorder impact on the academic performance among students from the University of Parakou (UP). Study methods: It was a descriptive cross-sectional study with prospective data collection among 363 students recruited through systematic random sampling from April to June 2015 at the campus of the UP. A questionnaire including the Mini International Neuropsychiatric Interview (MINI), the Liebowitz social anxiety intensity evaluation scale and the ASSIST was used for data collection in compliance with recommended ethical principles. Results and Conclusion Social phobia prevalence among students from the campus of University of Parakou was 11. 6% [CI95% = 10. 9 - 21. 2]. Its intensity was moderate (66.7%), medium (23.4%), severe (7.1%) and very severe (4.8%) only among female students. Moreover, gender, rural or urban living environment and field of study were statistically associated with this social phobia which reduced academic performance by 57.1%, among the studied population. However, 42.9% were not influenced in any way. Addiction to alcoholic beverages (23.8%) and anxiolytics (9.5%) were used to overcome the disorder. Although the risk of dependency to these substances was low, adverse effects on their health and socio-professional future were to be taken seriously.

Velocity equation for grenades while impacting on dry sand media

This paper deals with the collision of sphere shape grenades with sand media.The central issue of the article is the establishing of an empirical velocity equation of the grenade while impacting on sand that is used to solve motion equations of the mechanical mechanism inside the impact grenade fuze.The paper focuses on impact velocities that are lower than 5 m s^(-1).An experiment was conducted to study the velocity of the grenade while impacting on dry sand.A high-speed camera video was used to capture the grenade positions.The grenade velocity in the impact process was generated from these video data.Some types of fitting curves are used to regress the velocity equation of the grenade while interacting with the sand media and the best-fitting model is chosen.The result shows the regression curve has a high correlation with the experiment data for grenade velocities below 5 m s^(-1).The received regression equation is useful for analyzing the working ability of the inertial mechanism inside the impact grenade or analyzing and choosing the appropriate parameters of each part in the inertial mechanism to meet the required characteristics of the mechanism.

Environmental Impact Assessment of Onshore Wind Farms in the Region of Central Greece Using a Modified RIAM Method

Wind energy is one of the most basic forms of renewable energy,which shows an increasing rate of development worldwide and also at the European level.However,this rapid deployment of wind farms makes the need for an impact assessment of this type of projects on the natural and man-made environment imperative.The present paper aims to identify and assess the environmental impacts of wind farm projects in the Region of Central Greece.A modified Rapid Impact Assessment Matrix(RIAM)method is used for this purpose.The methodology includes the identification of the existing onshore wind farm projects in the study area,the appropriate modifications of the RIAM method to respond to the characteristics of the projects and the study area,the qualitative assessment of their potential impacts during construction and operational phases and the computation of the Environmental Performance Grade(EPG)of projects based on the pro-posed modified RIAM method.The results reveal that although there are some slight negative impacts on the natural environment of the study area,the examined wind farms contribute positively both to the atmosphere and to the socio-economic environment of the study.This study extends the potential for using RIAM as a tool in environmental impact assessment studies of renewable energy projects.

Experimental Investigation on Low-Velocity Impact Response and Residual Compressive Bearing Capacity of Composite Stringers

Three types of composite stringers were impacted from two different directions.Relationships between impact energy and visible defect length were found.The critical impact energy corresponding to barely visible impact damage(BVID)of each stringer was determined.Specimens with BVID were then compressed to obtain the residual strength.Experimental results showed that for all types of stringers,the critical energy of in-plane impact is always much lower than out-plane ones.In-plane impact causes much more decrement of stringers'bearing capacity than outplane impact.For both impact directions,I-stringers own the highest defect detectability,T-stringers come second.Meanwhile,I-stringers own the better residual strength ratio than I-stringers and I-stringers.Synthetic considering impact defect detectability and residual bearing capacity after impact,T-stringers own the best compression-afterimpact(CAI)behaviors.

Low-velocity impact of rectangular foam-filled fiber metal laminate tubes

Through theoretical analysis and finite element simulation,the low-velocity impact of rectangular foam-filled fiber metal laminate(FML)tubes is studied in this paper.According to the rigid-plastic material approximation with modifications,simple analytical solutions are obtained for the dynamic response of rectangular foam-filled FML tubes.The numerical calculations for low-velocity impact of rectangular foam-filled FML tubes are conducted.The accuracy of analytical solutions and numerical results is verified by each other.Finally,the effects of the metal volume fraction of FMLs,the number of the metal layers in FMLs,and the foam strength on the dynamic response of foam-filled tubes are discussed through the analytical model in details.It is shown that the force increases with the increase in the metal volume fraction in FMLs,the number of the metal layers in FML,and the foam strength for the given deflection.

Experiments and simulation of low-velocity impact characteristics on carbon fiber composite lattice core sandwich structures

Since composite sandwich structures are susceptible to low-velocity impact damage,a thorough characterization of the loading and damage process during impact is important.In the present paper,the low-velocity impact response of carbon fiber composites lattice structures is investigated by experimental and numerical methods.Impact tests on composite plates are performed using an instrumented drop-weight machine(Instron 9250HV)and a new damage mode is observed.A three-dimensional finite element model is built by ABAQUS/Explicit and user subroutine(VUMAT)to predict the peak loading and simulate the complicated damage problem.The numerical predictions are in good agreement with the experimental results.